Currently should_alloc_chunk uses ->total_bytes - ->bytes_readonly to
signify the total amount of bytes in this space info. However, given
Jeff's patch which adds bytes_pinned and bytes_may_use to the calculation
of num_allocated it becomes a lot more clear to just eliminate num_bytes
altogether and add the bytes_readonly to the amount of used space. That
way we don't change the results of the following statements. In the
process also start using btrfs_space_info_used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In a heavy write scenario, we can end up with a large number of pinned bytes.
This can translate into (very) premature ENOSPC because pinned bytes
must be accounted for when allowing a reservation but aren't accounted for
when deciding whether to create a new chunk.

This patch adds the accounting to should_alloc_chunk so that we can
create the chunk.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This is a minimal patch intended to be backported to older kernels.
We're going to extend the string specifying the compression method and
this would fail on kernels before that change (the string is compared
exactly).

Relax the string matching only to the prefix, ie. ignoring anything that
goes after "zlib" or "lzo", regardless of th format extension we decide
to use. This applies to the mount options and properties.

That way, patched old kernels could be booted on systems already
utilizing the new compression spec.

Applicable since commit 63541927, v3.14.
Signed-off-by: David Sterba <dsterba@suse.com>

Currently, the BTRFS_INODE_NOCOMPRESS will prevent any compression on a
given file, except when the mount is force-compress. As users have
reported on IRC, this will also prevent compression when requested by
defrag (btrfs fi defrag -c file).

The nocompress flag is set automatically by filesystem when the ratios
are bad and the user would have to manually drop the bit in order to
make defrag -c work. This is not good from the usability perspective.

This patch will raise priority for the defrag -c over nocompress, ie.
any file with NOCOMPRESS bit set will get defragmented. The bit will
remain untouched.

Alternate option was to also drop the nocompress bit and keep the
decision logic as is, but I think this is not the right solution.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

Add new value for compression to distinguish between defrag and
property. Previously, a single variable was used and this caused clashes
when the per-file 'compression' was set and a defrag -c was called.

The property-compression is loaded when the file is open, defrag will
overwrite the same variable and reset to 0 (ie. NONE) at when the file
defragmentaion is finished. That's considered a usability bug.

Now we won't touch the property value, use the defrag-compression. The
precedence of defrag is higher than for property (and whole-filesystem).
Signed-off-by: David Sterba <dsterba@suse.com>

This is preparatory for separating inode compression requested by defrag
and set via properties. This will fix a usability bug when defrag will
reset compression type to NONE. If the file has compression set via
property, it will not apply anymore (until next mount or reset through
command line).

We're going to fix that by adding another variable just for the defrag
call and won't touch the property. The defrag will have higher priority
when deciding whether to compress the data.
Signed-off-by: David Sterba <dsterba@suse.com>

Add skeleton code for compresison heuristics. Now it iterates over all
the pages, but in the end always says "yes, compress please", ie it does
not change the current behaviour.

In the future we're going to add various heuristics to analyze the data.
This patch can be used as a baseline for measuring if the effectivness
and performance.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhanced changelog, modified comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

Correctly account for IO when waiting for a submitted bio in scrub. This
only for the accounting purposes and should not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>

Correctly account for IO when waiting for a submitted DIO read, the case
when we're retrying.  This only for the accounting purposes and should
not change other behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>

The pinned chunks might be left over so we clean them but at this point
of close_ctree, there's noone to race with, the locking can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>

It's a simple call page_cache_sync_readahead, same arguments in the same
order.
Signed-off-by: David Sterba <dsterba@suse.com>

There's no PageFsMisc. Added by patch 4881ee5a in 2008, the flag is
not present in current kernels.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

The return value of flush_space was used to have significance in the
early days when the code was first introduced and before the ticketed
enospc rework. Since the latter got introduced the return value lost any
significance whatsoever to its callers. So let's remove it. While at it
also remove the unused ticket variable in
btrfs_async_reclaim_metadata_space. It was used in the initial version
of the ticketed ENOSPC work, however Wang Xiaoguang detected a problem
with this and fixed it in ce129655 ("btrfs: introduce tickets_id to
determine whether asynchronous metadata reclaim work makes progress").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>

Userspace transactions were introduced in commit 6bf13c0c ("Btrfs:
transaction ioctls") to provide semantics that Ceph's object store
required. However, things have changed significantly since then, to the
point where btrfs is no longer suitable as a backend for ceph and in
fact it's actively advised against such usages. Considering this, there
doesn't seem to be a widespread, legit use case of userspace
transaction. They also clutter the file->private pointer.

So to end the agony let's nuke the userspace transaction ioctls. As a
first step let's give time for people to voice their objection by just
WARN()ining when the userspace transaction is used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ move the warning past perm checks, keep the has-been-printed state;
  we're ok with just one warning over all filesystems ]
Signed-off-by: David Sterba <dsterba@suse.com>

Superblock is read and written using buffer heads, we need to set the
bdev blocksize. The magic constant has been hardcoded in several places,
so replace it with a named constant.
Signed-off-by: David Sterba <dsterba@suse.com>

There are two independent parts, one that writes the superblocks and
another that waits for completion. No functional changes, but cleanups,
reformatting and comment updates.
Signed-off-by: David Sterba <dsterba@suse.com>

Polish the helper:
* drop underscores, no special meaning here
* pass fs_devices, as this is what the API implements
* drop noinline, no apparent reason for such simple helper
* constify uuid
* add comment
Signed-off-by: David Sterba <dsterba@suse.com>

There are two helpers called in chain from one location, we can merge the
functionaliy.

Originally, alloc_fs_devices could fill the device uuid randomly if we
we didn't give the uuid buffer. This happens for seed devices but the
fsid is generated in btrfs_prepare_sprout, so we can remove it.
Signed-off-by: David Sterba <dsterba@suse.com>

The function submit_extent_page has 15(!) parameters right now, op and
op_flags are effectively one value stored to bio::bi_opf, no need to
pass them separately. So it's 14 parameters now.
Signed-off-by: David Sterba <dsterba@suse.com>

Unify types of local variables and parameters that store various
REQ_* values to unsigned int.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

This function prints an informative message and then continues
dev-replace. The message contains a progress percentage which is read
from the status. The status is allocated dynamically, about 2600 bytes,
just to read the single value. That's an overkill. We'll use the new
helper and drop the allocation.
Signed-off-by: David Sterba <dsterba@suse.com>

We'll want to read the percentage value from dev_replace elsewhere, move
the logic to a separate helper.
Signed-off-by: David Sterba <dsterba@suse.com>

All sorts of readahead errors are not considered fatal. We can continue
defragmentation without it, with some potential slow down, which will
last only for the current inode.
Signed-off-by: David Sterba <dsterba@suse.com>

We can safely use GFP_KERNEL, the function is called from two contexts:

- ioctl handler, called directly, no locks taken
- cleaner thread, running all queued defrag work, outside of any locks
Signed-off-by: David Sterba <dsterba@suse.com>

We don't need to restrict the allocation flags in btrfs_mount or
_remount. No big filesystem locks are held (possibly s_umount but that
does no count here).
Signed-off-by: David Sterba <dsterba@suse.com>

One of the error handling paths in __add_reloc_root contains btrfs_panic()
followed by some other code. As the name implies what it does is print
some error message and call BUG, naturally what follow afterwards is not
invoked. So remove this extra code.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This also adjusts the respective callers in other files. Those were
found with -Wunused-parameter.

btrfs_full_stripe_len's mapping_tree - introduced by 53b381b3
("Btrfs: RAID5 and RAID6") but it was never really used even in that
commit

btrfs_is_parity_mirror's mirror_num - same as above

chunk_drange_filter's chunk_offset - introduced by 94e60d5a ("Btrfs:
devid subset filter") and never used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

clear_super - usage was removed in commit cea67ab9 ("btrfs: clean
the old superblocks before freeing the device") but that change forgot
to remove the actual variable.

max_key - commit 6174d3cb ("Btrfs: remove unused max_key arg from
btrfs_search_forward") removed the max_key parameter but it forgot to
remove references from callers.

stripe_len - this one was added by e06cd3dd ("Btrfs: add validadtion
checks for chunk loading") but even then it wasn't used.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

find_raid56_stripe_len statically returns SZ_64K which equals BTRFS_STRIPE_LEN.
It's sole caller is __btrfs_alloc_chunk and it assigns the return value to ai
variable which is already set to BTRFS_STRIPE_LEN. So remove the function
invocation altogether and remove the function itself. Also remove the variable
since it's only aliasing BTRFS_STRIPE_LEN and use the define directly. Use
the occassion to simplify the rounding down of stripe_size now that the value
we want it to align is a power of 2.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

No functional changes, just make the code more self-explanatory.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_new_inode() is the only consumer move it to inode.c,
from ioctl.c.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

find_workspace() allocates up to num_online_cpus() + 1 workspaces.
free_workspace() will only keep num_online_cpus() workspaces. When
(de)compressing we will allocate num_online_cpus() + 1 workspaces, then
free one, and repeat. Instead, we can just keep num_online_cpus() + 1
workspaces around, and never have to allocate/free another workspace in the
common case.

I tested on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. I mounted a
BtrFS partition with -o compress-force={lzo,zlib,zstd} and logged whenever
a workspace was allocated of freed. Then I copied vmlinux (527 MB) to the
partition. Before the patch, during the copy it would allocate and free 5-6
workspaces. After, it only allocated the initial 3. This held true for lzo,
zlib, and zstd. The time it took to execute cp vmlinux /mnt/btrfs && sync
dropped from 1.70s to 1.44s with lzo compression, and from 2.04s to 1.80s
for zstd compression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The helpers append "\n" so we can keep the actual strings shorter. The
extra newline will print an empty line.  Some messages have been
slightly modified to be more consistent with the rest (lowercase first
letter).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The current code was erroneously checking for
root_level > BTRFS_MAX_LEVEL. If we had a root_level of 8 then the check
won't trigger and we could potentially hit a buffer overflow. The
correct check should be root_level >= BTRFS_MAX_LEVEL .
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For a missing device, btrfs will just refuse to mount with almost
meaningless kernel message like:

 BTRFS info (device vdb6): disk space caching is enabled
 BTRFS info (device vdb6): has skinny extents
 BTRFS error (device vdb6): failed to read the system array: -5
 BTRFS error (device vdb6): open_ctree failed

This patch will print a new message about the missing device:

 BTRFS info (device vdb6): disk space caching is enabled
 BTRFS info (device vdb6): has skinny extents
 BTRFS warning (device vdb6): devid 2 uuid 80470722-cad2-4b90-b7c3-fee294552f1b is missing
 BTRFS error (device vdb6): failed to read the system array: -5
 BTRFS error (device vdb6): open_ctree failed
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

As we use per-chunk degradable check, the global
num_tolerated_disk_barrier_failures is of no use.

We can now remove it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>