- 11 Jun, 2022 1 commit
-
-
Sean Christopherson authored
The x86-only KVM_CAP_TRIPLE_FAULT_EVENT was (appropriately) renamed to KVM_CAP_X86_TRIPLE_FAULT_EVENT when the patches were applied, but the docs and selftests got left behind. Fix them. Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 10 Jun, 2022 8 commits
-
-
Sean Christopherson authored
Bug the VM and terminate emulation if an out-of-bounds read into the emulator's data cache occurs. Knowingly contuining on all but guarantees that KVM will overwrite random kernel data, which is far, far worse than killing the VM. Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220526210817.3428868-9-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Bug the VM if KVM's emulator attempts to inject a bogus exception vector. The guest is likely doomed even if KVM continues on, and propagating a bad vector to the rest of KVM runs the risk of breaking other assumptions in KVM and thus triggering a more egregious bug. All existing users of emulate_exception() have hardcoded vector numbers (__load_segment_descriptor() uses a few different vectors, but they're all hardcoded), and future users are likely to follow suit, i.e. the change to emulate_exception() is a glorified nop. As for the ctxt->exception.vector check in x86_emulate_insn(), the few known times the WARN has been triggered in the past is when the field was not set when synthesizing a fault, i.e. for all intents and purposes the check protects against consumption of uninitialized data. Signed-off-by:
-
Sean Christopherson authored
Bug the VM, i.e. kill it, if the emulator accesses a non-existent GPR, i.e. generates an out-of-bounds GPR index. Continuing on all but gaurantees some form of data corruption in the guest, e.g. even if KVM were to redirect to a dummy register, KVM would be incorrectly read zeros and drop writes. Note, bugging the VM doesn't completely prevent data corruption, e.g. the current round of emulation will complete before the vCPU bails out to userspace. But, the very act of killing the guest can also cause data corruption, e.g. due to lack of file writeback before termination, so taking on additional complexity to cleanly bail out of the emulator isn't justified, the goal is purely to stem the bleeding and alert userspace that something has gone horribly wrong, i.e. to avoid _silent_ data corruption. Signed-off-by:
-
Sean Christopherson authored
Reduce the number of GPRs emulated by 32-bit KVM from 16 to 8. KVM does not support emulating 64-bit mode on 32-bit host kernels, and so should never generate accesses to R8-15. Opportunistically use NR_EMULATOR_GPRS in rsm_load_state_{32,64}() now that it is precise and accurate for both flavors. Wrap the definition with full #ifdef ugliness; sadly, IS_ENABLED() doesn't guarantee a compile-time constant as far as BUILD_BUG_ON() is concerned. Signed-off-by: -
Sean Christopherson authored
Use a u16 instead of a u32 to track the dirty/valid status of GPRs in the emulator. Unlike struct kvm_vcpu_arch, x86_emulate_ctxt tracks only the "true" GPRs, i.e. doesn't include RIP in its array, and so only needs to track 16 registers. Note, maxing out at 16 GPRs is a fundamental property of x86-64 and will not change barring a massive architecture update. Legacy x86 ModRM and SIB encodings use 3 bits for GPRs, i.e. support 8 registers. x86-64 uses a single bit in the REX prefix for each possible reference type to double the number of supported GPRs to 16 registers (4 bits). Reviewed-by:
-
Sean Christopherson authored
Omit RIP from the emulator's _regs array, which is used only for GPRs, i.e. registers that can be referenced via ModRM and/or SIB bytes. The emulator uses the dedicated _eip field for RIP, and manually reads from _eip to handle RIP-relative addressing. To avoid an even bigger, slightly more dangerous change, hardcode the number of GPRs to 16 for the time being even though 32-bit KVM's emulator technically should only have 8 GPRs. Add a TODO to address that in a future commit. See also the comments above the read_gpr() and write_gpr() declarations, and obviously the handling in writeback_registers(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
WARN and truncate the incoming GPR number/index when reading/writing GPRs in the emulator to guard against KVM bugs, e.g. to avoid out-of-bounds accesses to ctxt->_regs[] if KVM generates a bogus index. Truncate the index instead of returning e.g. zero, as reg_write() returns a pointer to the register, i.e. returning zero would result in a NULL pointer dereference. KVM could also force the index to any arbitrary GPR, but that's no better or worse, just different. Open code the restriction to 16 registers; RIP is handled via _eip and should never be accessed through reg_read() or reg_write(). See the comments above the declarations of reg_read() and reg_write(), and the behavior of writeback_registers(). The horrific open coded mess will be cleaned up in a future commit. There are no such bugs known to exist in the emulator, but determining that KVM is bug-free is not at all simple and requires a deep dive into the emulator. The code is so convoluted that GCC-12 with the recently enable -Warray-bounds spits out a false-positive due to a GCC bug: arch/x86/kvm/emulate.c:254:27: warning: array subscript 32 is above array bounds of 'long unsigned int[17]' [-Warray-bounds] 254 | return ctxt->_regs[nr]; | ~~~~~~~~~~~^~~~ In file included from arch/x86/kvm/emulate.c:23: arch/x86/kvm/kvm_emulate.h: In function 'reg_rmw': arch/x86/kvm/kvm_emulate.h:366:23: note: while referencing '_regs' 366 | unsigned long _regs[NR_VCPU_REGS]; | ^~~~~ Link: https://lore.kernel.org/all/YofQlBrlx18J7h9Y@google.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216026 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679Reported-and-tested-by:Robert Dinse <nanook@eskimo.com> Reported-by:
-
Sean Christopherson authored
Capture ctxt->regs_dirty in a local 'unsigned long' instead of casting it to an 'unsigned long *' for use in for_each_set_bit(). The bitops helpers really do read the entire 'unsigned long', even though the walking of the read value is capped at the specified size. I.e. 64-bit KVM is reading memory beyond ctxt->regs_dirty, which is a u32 and thus 4 bytes, whereas an unsigned long is 8 bytes. Functionally it's not an issue because regs_dirty is in the middle of x86_emulate_ctxt, i.e. KVM is just reading its own memory, but relying on that coincidence is gross and unsafe. Reviewed-by:
-
- 09 Jun, 2022 31 commits
-
-
Paolo Bonzini authored
s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to show tests x86: * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Rewrite gfn-pfn cache refresh * Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit
-
David Matlack authored
The selftests nested code only supports 4-level paging at the moment. This means it cannot map nested guest physical addresses with more than 48 bits. Allow perf_test_util nested mode to work on hosts with more than 48 physical addresses by restricting the guest test region to 48-bits. While here, opportunistically fix an off-by-one error when dealing with vm_get_max_gfn(). perf_test_util.c was treating this as the maximum number of GFNs, rather than the maximum allowed GFN. This didn't result in any correctness issues, but it did end up shifting the test region down slightly when using huge pages. Suggested-by:
David Matlack <dmatlack@google.com> Message-Id: <20220520233249.3776001-12-dmatlack@google.com> Signed-off-by:
-
David Matlack authored
Add an option to dirty_log_perf_test that configures the vCPUs to run in L2 instead of L1. This makes it possible to benchmark the dirty logging performance of nested virtualization, which is particularly interesting because KVM must shadow L1's EPT/NPT tables. For now this support only works on x86_64 CPUs with VMX. Otherwise passing -n results in the test being skipped. Signed-off-by:
-
David Matlack authored
Break up the long lines for LIBKVM and alphabetize each architecture. This makes reading the Makefile easier, and will make reading diffs to LIBKVM easier. No functional change intended. Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
David Matlack authored
The linker does obey strong/weak symbols when linking static libraries, it simply resolves an undefined symbol to the first-encountered symbol. This means that defining __weak arch-generic functions and then defining arch-specific strong functions to override them in libkvm will not always work. More specifically, if we have: lib/generic.c: void __weak foo(void) { pr_info("weak\n"); } void bar(void) { foo(); } lib/x86_64/arch.c: void foo(void) { pr_info("strong\n"); } And a selftest that calls bar(), it will print "weak". Now if you make generic.o explicitly depend on arch.o (e.g. add function to arch.c that is called directly from generic.c) it will print "strong". In other words, it seems that the linker is free to throw out arch.o when linking because generic.o does not explicitly depend on it, which causes the linker to lose the strong symbol. One solution is to link libkvm.a with --whole-archive so that the linker doesn't throw away object files it thinks are unnecessary. However that is a bit difficult to plumb since we are using the common selftests makefile rules. An easier solution is to drop libkvm.a just link selftests with all the .o files that were originally in libkvm.a. Reviewed-by: -
David Matlack authored
Drop the "all: $(STATIC_LIBS)" rule. The KVM selftests already depend on $(STATIC_LIBS), so there is no reason to have an extra "all" rule. Suggested-by:
-
David Matlack authored
Create a small helper function to check if a given EPT/VPID capability is supported. This will be re-used in a follow-up commit to check for 1G page support. No functional change intended. Reviewed-by:
-
David Matlack authored
This is a VMX-related macro so move it to vmx.h. While here, open code the mask like the rest of the VMX bitmask macros. No functional change intended. Reviewed-by:
-
David Matlack authored
Refactor nested_map() to specify that it explicityl wants 4K mappings (the existing behavior) and push the implementation down into __nested_map(), which can be used in subsequent commits to create huge page mappings. No function change intended. Reviewed-by:
-
David Matlack authored
nested_map() does not take a parameter named eptp_memslot. Drop the comment referring to it. Reviewed-by:
-
David Matlack authored
The current EPT mapping code in the selftests only supports mapping 4K pages. This commit extends that support with an option to map at 2M or 1G. This will be used in a future commit to create large page mappings to test eager page splitting. No functional change intended. Signed-off-by:
-
David Matlack authored
x86_page_size is an enum used to communicate the desired page size with which to map a range of memory. Under the hood they just encode the desired level at which to map the page. This ends up being clunky in a few ways: - The name suggests it encodes the size of the page rather than the level. - In other places in x86_64/processor.c we just use a raw int to encode the level. Simplify this by adopting the kernel style of PG_LEVEL_XX enums and pass around raw ints when referring to the level. This makes the code easier to understand since these macros are very common in KVM MMU code. Signed-off-by:
-
Paolo Bonzini authored
Commit 74fd41ed ("KVM: x86: nSVM: support PAUSE filtering when L0 doesn't intercept PAUSE") introduced passthrough support for nested pause filtering, (when the host doesn't intercept PAUSE) (either disabled with kvm module param, or disabled with '-overcommit cpu-pm=on') Before this commit, L1 KVM didn't intercept PAUSE at all; afterwards, the feature was exposed as supported by KVM cpuid unconditionally, thus if L1 could try to use it even when the L0 KVM can't really support it. In this case the fallback caused KVM to intercept each PAUSE instruction; in some cases, such intercept can slow down the nested guest so much that it can fail to boot. Instead, before the problematic commit KVM was already setting both thresholds to 0 in vmcb02, but after the first userspace VM exit shrink_ple_window was called and would reset the pause_filter_count to the default value. To fix this, change the fallback strategy - ignore the guest threshold values, but use/update the host threshold values unless the guest specifically requests disabling PAUSE filtering (either simple or advanced). Also fix a minor bug: on nested VM exit, when PAUSE filter counter were copied back to vmcb01, a dirty bit was not set. Thanks a lot to Suravee Suthikulpanit for debugging this! Fixes: 74fd41ed ("KVM: x86: nSVM: support PAUSE filtering when L0 doesn't intercept PAUSE") Reported-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220518072709.730031-1-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
Now that these functions are always called with preemption disabled, remove the preempt_disable()/preempt_enable() pair inside them. No functional change intended. Signed-off-by:
-
Maxim Levitsky authored
On SVM, if preemption happens right after the call to finish_rcuwait but before call to kvm_arch_vcpu_unblocking on SVM/AVIC, it itself will re-enable AVIC, and then we will try to re-enable it again in kvm_arch_vcpu_unblocking which will lead to a warning in __avic_vcpu_load. The same problem can happen if the vCPU is preempted right after the call to kvm_arch_vcpu_blocking but before the call to prepare_to_rcuwait and in this case, we will end up with AVIC enabled during sleep - Ooops. Signed-off-by:
-
Maxim Levitsky authored
Currently nothing prevents preemption in kvm_vcpu_update_apicv. On SVM, If the preemption happens after we update the vcpu->arch.apicv_active, the preemption itself will 'update' the inhibition since the AVIC will be first disabled on vCPU unload and then enabled, when the current task is loaded again. Then we will try to update it again, which will lead to a warning in __avic_vcpu_load, that the AVIC is already enabled. Fix this by disabling preemption in this code. Signed-off-by:
-
Maxim Levitsky authored
There are two issues in avic_kick_target_vcpus_fast 1. It is legal to issue an IPI request with APIC_DEST_NOSHORT and a physical destination of 0xFF (or 0xFFFFFFFF in case of x2apic), which must be treated as a broadcast destination. Fix this by explicitly checking for it. Also donâ€
™ t use ‘index’ in this case as it gives no new information. 2. It is legal to issue a logical IPI request to more than one target. Index field only provides index in physical id table of first such target and therefore can't be used before we are sure that only a single target was addressed. Instead, parse the ICRL/ICRH, double check that a unicast interrupt was requested, and use that info to figure out the physical id of the target vCPU. At that point there is no need to use the index field as well. In addition to fixing the above issues, also skip the call to kvm_apic_match_dest. It is possible to do this now, because now as long as AVIC is not inhibited, it is guaranteed that none of the vCPUs changed their apic id from its default value. This fixes boot of windows guest with AVIC enabled because it uses IPI with 0xFF destination and no destination shorthand. Fixes: 7223fd2d ("KVM: SVM: Use target APIC ID to complete AVIC IRQs when possible") Cc: stable@vger.kernel.org Signed-off-by: -
Maxim Levitsky authored
AVIC is now inhibited if the guest changes the apic id, and therefore this code is no longer needed. There are several ways this code was broken, including: 1. a vCPU was only allowed to change its apic id to an apic id of an existing vCPU. 2. After such change, the vCPU whose apic id entry was overwritten, could not correctly change its own apic id, because its own entry is already overwritten. Signed-off-by:
-
Maxim Levitsky authored
Neither of these settings should be changed by the guest and it is a burden to support it in the acceleration code, so just inhibit this code instead. Signed-off-by:
-
Maxim Levitsky authored
These days there are too many AVIC/APICv inhibit reasons, and it doesn't hurt to have some documentation for them. Signed-off-by:
-
Yuan Yao authored
Assign shadow_me_value, not shadow_me_mask, to PAE root entries, a.k.a. shadow PDPTRs, when host memory encryption is supported. The "mask" is the set of all possible memory encryption bits, e.g. MKTME KeyIDs, whereas "value" holds the actual value that needs to be stuffed into host page tables. Using shadow_me_mask results in a failed VM-Entry due to setting reserved PA bits in the PDPTRs, and ultimately causes an OOPS due to physical addresses with non-zero MKTME bits sending to_shadow_page() into the weeds: set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state. BUG: unable to handle page fault for address: ffd43f00063049e8 PGD 86dfd8067 P4D 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:mmu_free_root_page+0x3c/0x90 [kvm] kvm_mmu_free_roots+0xd1/0x200 [kvm] __kvm_mmu_unload+0x29/0x70 [kvm] kvm_mmu_unload+0x13/0x20 [kvm] kvm_arch_destroy_vm+0x8a/0x190 [kvm] kvm_put_kvm+0x197/0x2d0 [kvm] kvm_vm_release+0x21/0x30 [kvm] __fput+0x8e/0x260 ____fput+0xe/0x10 task_work_run+0x6f/0xb0 do_exit+0x327/0xa90 do_group_exit+0x35/0xa0 get_signal+0x911/0x930 arch_do_signal_or_restart+0x37/0x720 exit_to_user_mode_prepare+0xb2/0x140 syscall_exit_to_user_mode+0x16/0x30 do_syscall_64+0x4e/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: e54f1ff2 ("KVM: x86/mmu: Add shadow_me_value and repurpose shadow_me_mask") Signed-off-by:
Yuan Yao <yuan.yao@intel.com> Reviewed-by:
Kai Huang <kai.huang@intel.com> Message-Id: <20220608012015.19566-1-yuan.yao@intel.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.19, take #1 - Properly reset the SVE/SME flags on vcpu load - Fix a vgic-v2 regression regarding accessing the pending state of a HW interrupt from userspace (and make the code common with vgic-v3) - Fix access to the idreg range for protected guests - Ignore 'kvm-arm.mode=protected' when using VHE - Return an error from kvm_arch_init_vm() on allocation failure - A bunch of small cleanups (comments, annotations, indentation)
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv fixes for 5.19, take #1 - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry
-
Marc Zyngier authored
The layout of 'struct kvm_vcpu_arch' has evolved significantly since the initial port of KVM/arm64, so remove the stale comment suggesting that a prefix of the structure is used exclusively from assembly code. Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220609121223.2551-7-will@kernel.org
-
Will Deacon authored
host_stage2_try() asserts that the KVM host lock is held, so there's no need to duplicate the assertion in its wrappers. Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Will Deacon authored
has_vhe() expands to a compile-time constant when evaluated from the VHE or nVHE code, alternatively checking a static key when called from elsewhere in the kernel. On face value, this looks like a case of premature optimization, but in fact this allows symbol references on VHE-specific code paths to be dropped from the nVHE object. Expand the comment in has_vhe() to make this clearer, hopefully discouraging anybody from simplifying the code. Cc: David Brazdil <dbrazdil@google.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Will Deacon authored
Ignore 'kvm-arm.mode=protected' when using VHE so that kvm_get_mode() only returns KVM_MODE_PROTECTED on systems where the feature is available. Cc: David Brazdil <dbrazdil@google.com> Acked-by:
-
Marc Zyngier authored
A protected VM accessing ID_AA64ISAR2_EL1 gets punished with an UNDEF, while it really should only get a zero back if the register is not handled by the hypervisor emulation (as mandated by the architecture). Introduce all the missing ID registers (including the unallocated ones), and have them to return 0. Reported-by:
-
Will Deacon authored
If we fail to allocate the 'supported_cpus' cpumask in kvm_arch_init_vm() then be sure to return -ENOMEM instead of success (0) on the failure path. Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
-
Lukas Bulwahn authored
Commit fed9b26b ("MAINTAINERS: Update KVM RISC-V entry to cover selftests support") optimistically adds a file entry for tools/testing/selftests/kvm/riscv/, but this directory does not exist. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. The script is very useful to keep MAINTAINERS up to date and MAINTAINERS can be kept in a state where the script emits no warning. So, just drop the non-matching file entry rather than starting to collect exceptions of entries that may match in some close or distant future. Fixes: fed9b26b ("MAINTAINERS: Update KVM RISC-V entry to cover selftests support") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Anup Patel <anup@brainfault.org>
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
