- 27 Oct, 2022 15 commits
-
-
Alex Elder authored
Currently all platforms are assumed allot 8 routing table entries for use by the modem. Instead, add a new configuration data entry that defines the number of modem routing table entries, and record that in the IPA structure. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Alex Elder authored
Currently we assume that any routing table contains a fixed number of entries. The number of entries in a routing table can actually vary, depending only on the size of the IPA-local memory region used to hold the table. Stop assuming that a routing table has exactly 15 entries. Instead, determine the number of entries in a routing table by dividing its memory region size by the size of an entry. The number of entries is computed early, when ipa_table_mem_valid() is called by ipa_table_init(). Signed-off-by:
-
Alex Elder authored
The non-hashed routing tables for IPv4 and IPv6 will be the same size. And if supported, the hashed routing tables will be the same size as the non-hashed tables. Record the size (number of entries) of all routing tables in the IPA structure. For now, initialize this field using IPA_ROUTE_TABLE_MAX, and just do so when the first route table is validated. Signed-off-by:
-
Jakub Kicinski authored
The git history for this driver seems to be completely automated / tree wide changes. I can't find any boards or systems which would use this chip. Google search shows pictures of towel warmers and no networking products. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221025184254.1717982-1-kuba@kernel.orgSigned-off-by:
-
Michal Jaron authored
Add new VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC flag, opcode VIRTCHNL_OP_GET_SUPPORTED_RXDIDS and add member rxdid in struct virtchnl_rxq_info to support AVF Flex RXD extension. Add support to allow VF to query flexible descriptor RXDIDs supported by DDP package and configure Rx queues with selected RXDID for IAVF. Add code to allow VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message to be processed. Add necessary macros for registers. Signed-off-by:
Leyi Rong <leyi.rong@intel.com> Signed-off-by:
Xu Ting <ting.xu@intel.com> Signed-off-by:
Michal Jaron <michalx.jaron@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Maxime Coquelin <maxime.coquelin@redhat.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221025161252.1952939-1-jacob.e.keller@intel.comSigned-off-by:
-
Rafał Miłecki authored
RX code can be more efficient with the build_skb(). Allocating actual SKB around eth packet buffer - right before passing it up - results in a better cache usage. Without RPS (echo 0 > rps_cpus) BCM4908 NAT masq performance "jumps" between two speeds: ~900 Mbps and 940 Mbps (it's a 4 CPUs SoC). This change bumps the lower speed from 905 Mb/s to 918 Mb/s (tested using single stream iperf 2.0.5 traffic). There are more optimizations to consider. One obvious to try is GRO however as BCM4908 doesn't do hw csum is may actually lower performance. Sometimes. Some early testing: ┌─────────────────────────────────┬─────────────────────┬────────────────────┐ │ │ netif_receive_skb() │ napi_gro_receive() │ ├─────────────────────────────────┼─────────────────────┼────────────────────┤ │ netdev_alloc_skb() │ 905 Mb/s │ 892 Mb/s │ │ napi_alloc_frag() + build_skb() │ 918 Mb/s │ 917 Mb/s │ └─────────────────────────────────┴─────────────────────┴────────────────────┘ Another ideas: 1. napi_build_skb() 2. skb_copy_from_linear_data() for small packets Those need proper testing first though. That can be done later. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20221025132245.22871-1-zajec5@gmail.comSigned-off-by:
-
Fabio Estevam authored
During the bring-up of the Ethernet PHY, it is very useful to see the bootstrap status information, as it can help identifying hardware bootstrap mistakes. Allow printing the SOR1 register, which contains the strap status to ease the bring-up. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221025120109.779337-1-festevam@gmail.comSigned-off-by:
-
Tariq Toukan authored
Bond agnostically interacts with TLS device-offload requests via the .ndo_sk_get_lower_dev operation. Return value is true iff bond guarantees fixed mapping between the TLS connection and a lower netdev. Due to this nature, the bond TLS device offload features are not explicitly controllable in the bond layer. As of today, these are read-only values based on the evaluation of bond_sk_check(). However, this indication might be incorrect and misleading, when the feature bits are "fixed" by some dependency features. For example, NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding checksum offload is disabled. But in fact the bond ability to still offload TLS connections to the lower device is not hurt. This means that these bits can not be trusted, and hence better become unused. This patch revives some old discussion [1] and proposes a much simpler solution: Clear the bond's TLS features bits. Everyone should stop reading them. [1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Acked-by:
-
Junxiao Chang authored
It doesn't need extra macros for queue 0 & 4. Same macro could be used for all 8 queues. Related queue/channel functions could be combined together. Original macro which has two same parameters is unsafe macro and might have potential side effects. Each MTL RxQ DMA channel mask is 4 bits, so using (0xf << chan) instead of GENMASK(x + 3, x) to avoid unsafe macro. Signed-off-by:
Junxiao Chang <junxiao.chang@intel.com> Link: https://lore.kernel.org/r/20221025081747.1884926-1-junxiao.chang@intel.comSigned-off-by:
-
Victor Nogueira authored
This allows the use of a matchJSON field in tests to match against JSON output from the command under test, if that command outputs JSON. You specify what you want to match against as a JSON array or object in the test's matchJSON field. You can leave out any fields you don't want to match against that are present in the output and they will be skipped. An example matchJSON value would look like this: "matchJSON": [ { "Value": { "neighIP": { "family": 4, "addr": "AQIDBA==", "width": 32 }, "nsflags": 142, "ncflags": 0, "LLADDR": "ESIzRFVm" } } ] The real output from the command under test might have some extra fields that we don't care about for matching, and since we didn't include them in our matchJSON value, those fields will not be attempted to be matched. If everything we included above has the same values as the real command output, the test will pass. The matchJSON field's type must be the same as the command output's type, otherwise the test will fail. So if the command outputs an array, then the value of matchJSON must also be an array. If matchJSON is an array, it must not contain more elements than the command output's array, otherwise the test will fail. Signed-off-by:Jeremy Carter <jeremy@mojatatu.com> Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20221024111603.2185410-1-victor@mojatatu.comSigned-off-by:
-
Kunihiko Hayashi authored
ave_open() in ave_resume() executes __phy_resume() via phy_start(), so no need to call phy_resume() explicitly. Remove it. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20221024072314.24969-1-hayashi.kunihiko@socionext.comSigned-off-by:
-
Colin Ian King authored
Variable total_copied is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221024135046.2159523-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
state is deferenced earlier in the function, the NULL check is pointless. Since we don't have any crash reports presumably it's safe to assume state is not NULL. Fixes: f392a184 ("net: phylink: provide phylink_validate_mask_caps() helper") Reviewed-by:
Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221025185126.1720553-1-kuba@kernel.orgSigned-off-by:
-
Eric Dumazet authored
My recent patch missed that mptcp_subflow_create_socket() was creating a 'kernel' socket, then converted it to 'user' socket. Fixes: 0cafd77d ("net: add a refcount tracker for kernel sockets") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20221025180546.652251-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Re-pull from Stefan to fix the warnings. Stefan Schmidt says: ==================== pull-request v2: ieee802154-next 2022-10-26 * tag 'ieee802154-for-net-next-2022-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next: net: mac802154: Fixup function parameter name in docs ==================== Link: https://lore.kernel.org/r/20221026075638.578840-1-stefan@datenfreihafen.orgSigned-off-by:
-
- 26 Oct, 2022 20 commits
-
-
David S. Miller authored
Merge tag 'ieee802154-for-net-next-2022-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== == One of the biggest cycles for ieee802154 in a long time. We are landing the first pieces of a big enhancements in managing PAN's. We might have another pull request ready for this cycle later on, but I want to get this one out first. Miquel Raynal added support for sending frames synchronously as a dependency to handle MLME commands. Also introducing more filtering levels to match with the needs of a device when scanning or operating as a pan coordinator. To support development and testing the hwsim driver for ieee802154 was also enhanced for the new filtering levels and to update the PIB attributes. Alexander Aring fixed quite a few bugs spotted during reviewing changes. He also added support for TRAC in the atusb driver to have better failure handling if the firmware provides the needed information. Jilin Yuan fixed a comment with a repeated word in it. ================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first patch is by Daniel S. Trevitz and adds documentation for switchable termination resistors. Zhang Changzhong's patch fixes a debug output in the j13939 stack. Oliver Hartkopp finally removes the pch_can driver, which is superseded by the generic c_can driver. Gustavo A. R. Silva replaces a zero-length array with DECLARE_FLEX_ARRAY() in the ucan driver. Kees Cook's patch removes a no longer needed silencing of "-Warray-bounds" warnings for the kvaser_usb driver. The next 2 patches target the m_can driver. The first is by me cleans up the LEC error handling, the second is by Vivek Yadav and extends the LEC error handling to the data phase of CAN-FD frames. The next 9 patches all target the gs_usb driver. The first 5 patches are by me and improve the Kconfig prompt and help text, set netdev->dev_id to distinguish multi CAN channel devices, allow loopback and listen only at the same time, and clean up the gs_can_open() function a bit. The remaining 4 patches are by Jeroen Hofstee and add support for 2 new features: Bus Error Reporting and Get State. Jimmy Assarsson and Anssi Hannula contribute 10 patches for the kvaser_usb driver. They first add Listen Only and Bus Error Reporting support, handle CMD_ERROR_EVENT errors, improve CAN state handling, restart events, and configuration of the bit timing parameters. Another patch by me which fixes the indention in the m_can driver. A patch by Dongliang Mu cleans up the ucan_disconnect() function in the ucan driver. The last patch by Biju Das is for the rcan_canfd driver and cleans up the reset handling. ==================== Signed-off-by: -
Biju Das authored
Replace devm_reset_control_get_exclusive->devm_reset_control_ get_optional_exclusive so that we can avoid unnecessary SoC specific check in probe(). Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20221025155657.1426948-4-biju.das.jz@bp.renesas.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Dongliang Mu authored
From API pairing, change unregister_netdev() to unregister_candev() since the registration function is register_candev(). Actually, they are the same. Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/all/20221024110033.727542-1-dzm91@hust.edu.cn [mkl: adjust subject + commit message] Signed-off-by:
-
Marc Kleine-Budde authored
The driver uses indent-with-tab for defines. Replace spaces after IR_ERR_BUS_31X with tab for consistent indention. Link: https://lore.kernel.org/all/20221024185544.68240-1-mkl@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Jimmy Assarsson <extja@kvaser.com> says: Split v4 series, since it got rejected [1]. This part only contains non-critical fixes and improvements. Note: This series depend on changes in [2]. Changes in v5: - Split v4 series, since it got rejected [1]. This part only contains non-critical fixes and improvements. Changes in v4: https://lore.kernel.org/all/20220903182344.139-1-extja@kvaser.com - Add Tested-by: Anssi Hannula to [PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device - Update commit message in [PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Changes in v3: https://lore.kernel.org/all/20220901122729.271-1-extja@kvaser.com - Rebase on top of commit 1d5eeda2 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support") - Add Tested-by: Anssi Hannula - Add stable@vger.kernel.org to CC. - Add my S-o-b to all patches - Fix regression introduced in [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device found by Anssi Hannula https://lore.kernel.org/all/b25bc059-d776-146d-0b3c-41aecf4bd9f8@bitwise.fi v2: https://lore.kernel.org/all/20220708115709.232815-1-extja@kvaser.com v1: https://lore.kernel.org/all/20220516134748.3724796-1-anssi.hannula@bitwise.fi [1] https://lore.kernel.org/all/20220920122246.00dbe946@kernel.org [2] https://lore.kernel.org/all/20221010150829.199676-1-extja@kvaser.com Link: https://lore.kernel.org/all/20221010185237.319219-1-extja@kvaser.com [mkl: move "1/1 can: kvaser_usb: Fix possible completions during init_completion" to linux-can tree] [mkl: improve change log, update links] Signed-off-by:
-
Jimmy Assarsson authored
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming The device will respond with a CMD_ERROR_EVENT command, with error_code KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ contains invalid bittiming parameters. However, this command does not contain any channel reference. To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare the requested bittiming parameters with the device reported parameters. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by:Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by:
Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.comSigned-off-by:
-
Jimmy Assarsson authored
Add struct kvaser_usb_busparams containing the busparameters used in CMD_{SET,GET}_BUSPARAMS* commands. Tested-by: -
Anssi Hannula authored
When auto-restart is enabled, the kvaser_usb_leaf driver considers transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery event (restart). However, these events may occur at interface startup time before kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no actual restart having occurred. Fix that by making the auto-restart condition checks more strict so that they only trigger when the interface was actually in the BUS_OFF state. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by:
-
Anssi Hannula authored
With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed that if the device was bus-off when stopped, at next start (either via interface down/up or manual bus-off restart) the initial CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have the M16C_STATE_BUS_OFF bit still set, causing the interface to immediately go bus-off again. The bit seems to internally clear quickly afterwards but we do not get another CMD_CHIP_STATE_EVENT. Fix the issue by ignoring any initial bus-off state until we see at least one bus-on state. Also, poll the state periodically until that occurs. It is possible we lose one actual immediately occurring bus-off event here in which case the HW will auto-recover and we see the recovery event. We will then catch the next bus-off event, if any. This issue did not reproduce with 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50. Fixes: 71873a9b ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices") Tested-by:
-
Anssi Hannula authored
0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device, causing a stopped device to appear as CAN_STATE_BUS_OFF instead of CAN_STATE_STOPPED. Fix that by not handling error events on stopped devices. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by:
-
Anssi Hannula authored
The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send any unsolicited events when error counters decrease or when the device transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING). This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE state. Fix that by asking for chip state (inc. counters) event every 0.5 secs when error counters are non-zero. Since there are non-error-counter devices, also always poll in ERROR_PASSIVE even if the counters show zero. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by:
-
Anssi Hannula authored
kvaser_usb_leaf_rx_error_update_can_state() sets error state according to error counters when the hardware does not indicate a specific state directly. However, this is currently gated behind a check for M16C_STATE_BUS_ERROR which does not always seem to be set when error counters are increasing, and may not be set when error counters are decreasing. This causes the CAN_STATE_ERROR_WARNING state to not be set in some cases even when appropriate. Change the code to set error state from counters even without M16C_STATE_BUS_ERROR. The Error-Passive case seems superfluous as it is already set via M16C_STATE_BUS_PASSIVE flag above, but it is kept for now. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by:
-
Jimmy Assarsson authored
The device will send an error event command, to indicate certain errors. This indicates a misbehaving driver, and should never occur. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by:
-
Jimmy Assarsson authored
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Prepare for handling CMD_ERROR_EVENT. Rename struct {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: -
Jimmy Assarsson authored
Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain capabilities. We are only interested in LISTENONLY mode and wither the device reports CAN error counters. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by:
-
Stefan Schmidt authored
The function parameter name was wrong in kdocs. net/mac802154/util.c:27: warning: Function parameter or member 'hw' not described in 'ieee802154_wake_queue' net/mac802154/util.c:27: warning: Excess function parameter 'local' description in 'ieee802154_wake_queue' net/mac802154/util.c:53: warning: Function parameter or member 'hw' not described in 'ieee802154_stop_queue' net/mac802154/util.c:53: warning: Excess function parameter 'local' description in 'ieee802154_stop_queue' Fixing name and description. Signed-off-by:Stefan Schmidt <stefan@datenfreihafen.org>
-
Colin Ian King authored
Variable tx_use is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by:
-
Colin Ian King authored
Variable num_entries is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by:
-
caihuoqing authored
Set max_mtu/min_mtu directly to avoid making the validity judgment when set mtu, because the judgment is made in net/core: dev_validate_mtu, so to simplify the code. Signed-off-by:
caihuoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20221024103349.4494-1-cai.huoqing@linux.devSigned-off-by:
-
- 25 Oct, 2022 5 commits
-
-
Jakub Kicinski authored
Raju Lakkaraju says: ==================== net: lan743x: PCI11010 / PCI11414 devices Enhancements This patch series continues with the addition of supported features for the Ethernet function of the PCI11010 / PCI11414 devices to the LAN743x driver. ==================== Link: https://lore.kernel.org/r/20221024082516.661199-1-Raju.Lakkaraju@microchip.comSigned-off-by:
-
Raju Lakkaraju authored
Add support for MDI-X status and configuration for KSZ9131 chips Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
-
Raju Lakkaraju authored
Add pause get and set functions Signed-off-by:
-
Kees Cook authored
One of the worst offenders of "fake flexible arrays" is struct sockaddr, as it is the classic example of why GCC and Clang have been traditionally forced to treat all trailing arrays as fake flexible arrays: in the distant misty past, sa_data became too small, and code started just treating it as a flexible array, even though it was fixed-size. The special case by the compiler is specifically that sizeof(sa->sa_data) and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1)) do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat it as a flexible array. However, the coming -fstrict-flex-arrays compiler flag will remove these special cases so that FORTIFY_SOURCE can gain coverage over all the trailing arrays in the kernel that are _not_ supposed to be treated as a flexible array. To deal with this change, convert sa_data to a true flexible array. To keep the structure size the same, move sa_data into a union with a newly introduced sa_data_min with the original size. The result is that FORTIFY_SOURCE can continue to have no idea how large sa_data may actually be, but anything using sizeof(sa->sa_data) must switch to sizeof(sa->sa_data_min). Cc: Jens Axboe <axboe@kernel.dk> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Petr Machata <petrm@nvidia.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.orgSigned-off-by:
-
Kees Cook authored
Round up allocations with kmalloc_size_roundup() so that build_skb()'s use of ksize() is always accurate and no special handling of the memory is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE. Cc: Rasesh Mody <rmody@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
