- 02 Oct, 2018 40 commits
-
-
Punit Agrawal authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 976d34e2 upstream. When there is contention on faulting in a particular page table entry at stage 2, the break-before-make requirement of the architecture can lead to additional refaulting due to TLB invalidation. Avoid this by skipping a page table update if the new value of the PTE matches the previous value. Cc: stable@vger.kernel.org Fixes: d5d8184d ("KVM: ARM: Memory virtualization setup") Reviewed-by:
Suzuki Poulose <suzuki.poulose@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Greg Hackmann authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 5ad356ea upstream. ARM64's pfn_valid() shifts away the upper PAGE_SHIFT bits of the input before seeing if the PFN is valid. This leads to false positives when some of the upper bits are set, but the lower bits match a valid PFN. For example, the following userspace code looks up a bogus entry in /proc/kpageflags: int pagemap = open("/proc/self/pagemap", O_RDONLY); int pageflags = open("/proc/kpageflags", O_RDONLY); uint64_t pfn, val; lseek64(pagemap, [...], SEEK_SET); read(pagemap, &pfn, sizeof(pfn)); if (pfn & (1UL << 63)) { /* valid PFN */ pfn &= ((1UL << 55) - 1); /* clear flag bits */ pfn |= (1UL << 55); lseek64(pageflags, pfn * sizeof(uint64_t), SEEK_SET); read(pageflags, &val, sizeof(val)); } On ARM64 this causes the userspace process to crash with SIGSEGV rather than reading (1 << KPF_NOPAGE). kpageflags_read() treats the offset as valid, and stable_page_flags() will try to access an address between the user and kernel address ranges. Fixes: c1cc1552 ("arm64: MMU initialisation") Cc: stable@vger.kernel.org Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Eric Sandeen authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit f39b3f45 upstream. When ext4_find_entry() falls back to "searching the old fashioned way" due to a corrupt dx dir, it needs to reset the error code to NULL so that the nonstandard ERR_BAD_DX_DIR code isn't returned to userspace. https://bugzilla.kernel.org/show_bug.cgi?id=199947Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@yandex.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit a4d2aadc upstream. While working on extended rand for last_error/first_error timestamps, I noticed that the endianess is wrong; we access the little-endian fields in struct ext4_super_block as native-endian when we print them. This adds a special case in ext4_attr_show() and ext4_attr_store() to byteswap the superblock fields if needed. In older kernels, this code was part of super.c, it got moved to sysfs.c in linux-4.4. Cc: stable@vger.kernel.org Fixes: 52c198c6 ("ext4: add sysfs entry showing whether the fs contains errors") Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 7d95178c upstream. Extended attribute names are defined to be NUL-terminated, so the name must not contain a NUL character. This is important because there are places when remove extended attribute, the code uses strlen to determine the length of the entry. That should probably be fixed at some point, but code is currently really messy, so the simplest fix for now is to simply validate that the extended attributes are sane. https://bugzilla.kernel.org/show_bug.cgi?id=200401Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
-
Claudio Imbrenda authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 306d6c49 upstream. When the oom killer kills a userspace process in the page fault handler while in guest context, the fault handler fails to release the mm_sem if the FAULT_FLAG_RETRY_NOWAIT option is set. This leads to a deadlock when tearing down the mm when the process terminates. This bug can only happen when pfault is enabled, so only KVM clients are affected. The problem arises in the rare cases in which handle_mm_fault does not release the mm_sem. This patch fixes the issue by manually releasing the mm_sem when needed. Fixes: 24eb3a82 ("KVM: s390: Add FAULT_FLAG_RETRY_NOWAIT for guest fault") Cc: <stable@vger.kernel.org> # 3.15+ Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 4559b0a7 upstream. If we're trying to make a data reservation and we have to allocate a data chunk we could leak ret == 1, as do_chunk_alloc() will return 1 if it allocated a chunk. Since the end of the function is the success path just return 0. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 22783155 upstream. Fixes problem pointed out by Pavel in discussions about commit 729c0c9dSigned-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> # 3.18.x+ Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit fd09b7d3 upstream. An earlier commit had a typo which prevented the optimization from working: commit 18dd8e1a ("Do not send SMB3 SET_INFO request if nothing is changing") Thank you to Metze for noticing this. Also clear a reserved field in the FILE_BASIC_INFO struct we send that should be zero (all the other fields in that struct were set or cleared explicitly already in cifs_set_file_info). Reviewed-by:
Stefan Metzmacher <metze@samba.org> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 126c97f4 upstream. The kmalloc was not being checked - if it fails issue a warning and return -ENOMEM to the caller. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: b8da344b ("cifs: dynamic allocation of ntlmssp blob") Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1792392 commit 950132af upstream. /proc/fs/cifs/DebugData displays the features (Kconfig options) used to build cifs.ko but it was missing some, and needed comma separator. These can be useful in debugging certain problems so we know which optional features were enabled in the user's build. Also clarify them, by making them more closely match the corresponding CONFIG_CIFS_* parm. Old format: Features: dfs fscache posix spnego xattr acl New format: Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL Signed-off-by:
Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
jie@chenjie6@huwei.com authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 24eee1e4 ] ioremap_prot() can return NULL which could lead to an oops. Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.comSigned-off-by:
chen jie <chenjie6@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Li Zefan <lizefan@huawei.com> Cc: chenjie <chenjie6@huawei.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Jim Gill authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit e95153b6 ] Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by:
Jim Gill <jgill@vmware.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johannes Thumshirn authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 63d0e3df ] Drop the frames in the ELS LOGO error path instead of just returning an error. This fixes the following kmemleak report: unreferenced object 0xffff880064cb1000 (size 424): comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc] [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc] [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc] [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe] [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe] [<(____ptrval____)>] process_one_work+0x7ff/0x1420 [<(____ptrval____)>] worker_thread+0x87/0xef0 [<(____ptrval____)>] kthread+0x2db/0x390 [<(____ptrval____)>] ret_from_fork+0x35/0x40 [<(____ptrval____)>] 0xffffffffffffffff which can be triggered by issuing echo eth0 > /sys/bus/fcoe/ctlr_destroy Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit afb41bb0 ] Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit ec837d62 ] Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 2423665e ] Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add <asm-generic/types.h> for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit ab123fe0 ] When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Rafał Miłecki authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit d5ea019f ] This reverts commit 2a027b47 ("MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"). Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe initialization. It's likely that BCM4717A1 is also affected. I didn't notice that earlier as the only BCM47XX devices with PCIe I own are: 1) BCM4706 with 2 x 14e4:4331 2) BCM4706 with 14e4:4360 and 14e4:4331 it appears that BCM4706 is unaffected. While BCM5300X-ES300-RDS.pdf seems to document that erratum and its workarounds (according to quotes provided by Tokunori) it seems not even Broadcom follows them. According to the provided info Broadcom should define CONF7_ES in their SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking both didn't reveal such code. It *could* mean Broadcom also had some problems with the given workaround. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Michael Marley <michael@michaelmarley.com> Patchwork: https://patchwork.linux-mips.org/patch/20032/ URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688 Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Calvin Walton authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 5aa3d1a2 ] This fixes the reported family on modern AMD processors (e.g. Ryzen, which is family 0x17). Previously these processors all showed up as family 0xf. See the document https://support.amd.com/TechDocs/56255_OSRR.pdf section CPUID_Fn00000001_EAX for how to calculate the family from the BaseFamily and ExtFamily values. This matches the code in arch/x86/lib/cpu.c Signed-off-by:
Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Li Wang authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 16e536ef ] /sys/../zswap/stored_pages keeps rising in a zswap test with "zswap.max_pool_percent=0" parameter. But it should not compress or store pages any more since there is no space in the compressed pool. Reproduce steps: 1. Boot kernel with "zswap.enabled=1" 2. Set the max_pool_percent to 0 # echo 0 > /sys/module/zswap/parameters/max_pool_percent 3. Do memory stress test to see if some pages have been compressed # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s 4. Watching the 'stored_pages' number increasing or not The root cause is: When zswap_max_pool_percent is set to 0 via kernel parameter, zswap_is_full() will always return true due to zswap_shrink(). But if the shinking is able to reclain a page successfully the code then proceeds to compressing/storing another page, so the value of stored_pages will keep changing. To solve the issue, this patch adds a zswap_is_full() check again after zswap_shrink() to make sure it's now under the max_pool_percent, and to not compress/store if we reached the limit. Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.comSigned-off-by:
Li Wang <liwang@redhat.com> Acked-by:
Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 82f4f3e6 ] Add a testcase for checking snapshot and tracing_on relationship. This ensures that the snapshotting doesn't affect current tracing on/off settings. Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Shubhrajyoti Datta authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 03bc7cab ] If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit ae2dcb28 ] Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 0894da84 ] Including asm/cacheflush.h first results in the following build error when trying to build sparc32:allmodconfig, because 'struct page' has not been declared, and the function declaration ends up creating a separate (private) declaration of struct page (as a result of function arguments being in the scope of the function declaration and definition, not in global scope). The C scoping rules do not just affect variable visibility, they also affect type declaration visibility. The end result is that when the actual call site is seen in <linux/highmem.h>, the 'struct page' type in the caller is not the same 'struct page' that the function was declared with, resulting in: In file included from arch/sparc/include/asm/page.h:10:0, ... from drivers/staging/media/omap4iss/iss_video.c:15: include/linux/highmem.h: In function 'clear_user_highpage': include/linux/highmem.h:137:31: error: passing argument 1 of 'sparc_flush_page_to_ram' from incompatible pointer type Include generic includes files first to fix the problem. Fixes: fc96d58c ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices") Suggested-by:
Guenter Roeck <linux@roeck-us.net> [ Added explanation of C scope rules - Linus ] Signed-off-by:
-
Alexander Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit cc8de9a6 ] If CLKH is set to 0 I2C clock is not generated at all, so avoid this value and stretch the clock in this case. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit b5c1a23b ] of_iomap() can return NULL so that return needs to be checked and NULL treated as failure. While at it also take care of the missing of_node_put() in the error path. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit c9ce1fa1 ] Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 6e568307 ] Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[<ffffffff816429c4>] [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0 [<ffffffff81644d97>] ip6_output+0x57/0x100 [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840 [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0 [<ffffffff81645db9>] ipv6_rcv+0x319/0x530 [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70 [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b701764 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 58874c7b ] There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 64119e05 ] Add a missing rcu_read_unlock in the error path Fixes: c95567c8 ("caif: added check for potential null return") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Len Brown authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 9d83601a ] The -S (system summary) option failed to print any data on a 1-processor system. Reported-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Eugeniu Rosca authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit eec24f2a ] The list [1] of commits doing endianness fixes in USB subsystem is long due to below quote from USB spec Revision 2.0 from April 27, 2000: ------------ 8.1 Byte/Bit Ordering Multiple byte fields in standard descriptors, requests, and responses are interpreted as and moved over the bus in little-endian order, i.e. LSB to MSB. ------------ This commit belongs to the same family. [1] Example of endianness fixes in USB subsystem: commit 14e1d56c ("usb: gadget: f_uac2: endianness fixes.") commit 42370b82 ("usb: gadget: f_uac1: endianness fixes.") commit 63afd5cc ("USB: chaoskey: fix Alea quirk on big-endian hosts") commit 74098c4a ("usb: gadget: acm: fix endianness in notifications") commit cdd7928d ("ACM gadget: fix endianness in notifications") commit 323ece54 ("cdc-wdm: fix endianness bug in debug statements") commit e102609f ("usb: gadget: uvc: Fix endianness mismatches") list goes on Fixes: 132fcb46 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Senna Tschudin authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit a2b22ddd ] The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C library htole16/32 function calls. However, cpu_to_le16/32 are used when initializing structures, i.e in a context where a function call is not allowed. It works fine on little endian systems because htole16/32 are defined by the C library as no-ops. But on big-endian systems, they are actually doing something, which might involve calling a function, causing build failures, such as: ffs-test.c:48:25: error: initializer element is not constant #define cpu_to_le32(x) htole32(x) ^~~~~~~ ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’ .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2), ^~~~~~~~~~~ To solve this, we code cpu_to_le16/32 in a way that allows them to be used when initializing structures. This fix was imported from meta-openembedded/android-tools/fix-big-endian-build.patch written by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit a39ba90a ] Fix build errors when built for PPC64: These variables are only used on PPC32 so they don't need to be initialized for PPC64. ../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start': ../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_le; ../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_le; and the sysfs "show" function return type should be ssize_t, not int: ../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types] static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit f36b507c ] The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.16.7 is: [FUNC] r8a66597_queue(GFP_KERNEL) drivers/usb/gadget/udc/r8a66597-udc.c, 1193: r8a66597_queue in get_status drivers/usb/gadget/udc/r8a66597-udc.c, 1301: get_status in setup_packet drivers/usb/gadget/udc/r8a66597-udc.c, 1381: setup_packet in irq_control_stage drivers/usb/gadget/udc/r8a66597-udc.c, 1508: irq_control_stage in r8a66597_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit 0602088b ] The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16.7 are: [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 839: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 835: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect To fix these bugs, msleep() is replaced with mdelay(). This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by:
-
Lucas Stach authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit c80d673b ] If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Lucas Stach authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit b5826239 ] The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by:
-
Varun Prakash authored
BugLink: https://bugs.launchpad.net/bugs/1792392 [ Upstream commit a17037e7 ] In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the opcode, it is possible that task->hdr is NULL. There are two cases based on opcode argument: 1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called after iscsi_check_tmf_restrictions() iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu(). Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL pointer dereference. 2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or invalid. This patch fixes this issue by removing task->hdr->opcode from the printk statement. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
