- 12 Mar, 2018 2 commits
-
-
Alexey Budankov authored
Change event groups into RB trees sorted by CPU and then by a 64bit index, so that multiplexing hrtimer interrupt handler would be able skipping to the current CPU's list and ignore groups allocated for the other CPUs. New API for manipulating event groups in the trees is implemented as well as adoption on the API in the current implementation. pinned_group_sched_in() and flexible_group_sched_in() API are introduced to consolidate code enabling the whole group from pinned and flexible groups appropriately. Signed-off-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/372f9c8b-0cfe-4240-e44d-83d863d40813@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Mark reported his arm64 perf fuzzer runs sometimes splat like: armv8pmu_read_counter+0x1e8/0x2d8 armpmu_event_update+0x8c/0x188 armpmu_read+0xc/0x18 perf_output_read+0x550/0x11e8 perf_event_read_event+0x1d0/0x248 perf_event_exit_task+0x468/0xbb8 do_exit+0x690/0x1310 do_group_exit+0xd0/0x2b0 get_signal+0x2e8/0x17a8 do_signal+0x144/0x4f8 do_notify_resume+0x148/0x1e8 work_pending+0x8/0x14 which asserts that we only call pmu::read() on ACTIVE events. The above callchain does: perf_event_exit_task() perf_event_exit_task_context() task_ctx_sched_out() // INACTIVE perf_event_exit_event() perf_event_set_state(EXIT) // EXIT sync_child_event() perf_event_read_event() perf_output_read() perf_output_read_group() leader->pmu->read() Which results in doing a pmu::read() on an !ACTIVE event. I _think_ this is 'new' since we added attr.inherit_stat, which added the perf_event_read_event() to the exit path, without that perf_event_read_output() would only trigger from samples and for @event to trigger a sample, it's leader _must_ be ACTIVE too. Still, adding this check makes it consistent with the @sub case for the siblings. Reported-and-Tested-by:
-
- 09 Mar, 2018 8 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180308' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Support to display the IPC/Cycle in 'annotate' TUI, for systems where this info can be obtained, like Intel's >= Skylake (Jin Yao) - Support wildcards on PMU name in dynamic PMU events (Agustin Vega-Frias) - Display pmu name when printing unmerged events in stat (Agustin Vega-Frias) - Auto-merge PMU events created by prefix or glob match (Agustin Vega-Frias) - Fix s390 'call' operations target function annotation (Thomas Richter) - Handle s390 PC relative load and store instruction in the augmented 'annotate', code, used so far in the TUI modes of 'perf report' and 'perf annotate' (Thomas Richter) - Provide libtraceevent with a kernel symbol resolver, so that symbols in tracepoint fields can be resolved when showing them in tools such as 'perf report' (Wang YanQing) - Refactor the cgroups code to look more like other code in tools/perf, using cgroup__{put,get} for refcount operations instead of its open-coded equivalent, breaking larger functions, etc (Arnaldo Carvalho de Melo) - Implement support for the -G/--cgroup target in 'perf trace', allowing strace like tracing (plus other events, backtraces, etc) for cgroups (Arnaldo Carvalho de Melo) - Update thread shortname in 'perf sched map' when the thread's COMM changes (Changbin Du) - refcount 'struct mem_info', for better sharing it over several users, avoid duplicating structs and fixing crashes related to use after free (Jiri Olsa) - Display perf.data version, offsets in 'perf report --header' (Jiri Olsa) - Record the machine's memory topology information in a perf.data feature section, to be used by tools such as 'perf c2c' (Jiri Olsa) - Fix output of forced groups in the header for 'perf report' --stdio and --tui (Jiri Olsa) - Better support llvm, clang, cxx make tests in the build process (Jiri Olsa) - Streamline the 'struct perf_mmap' methods, storing some info in the struct instead of passing it via various methods, shortening its signatures (Kan Liang) - Update the quipper perf.data parser library site information (Stephane Eranian) - Correct perf's man pages title markers for asciidoctor (Takashi Iwai) - Intel PT fixes and refactorings paving the way for implementing support for AUX area sampling (Adrian Hunter) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Kan Liang authored
Userspace RDPMC cannot possibly work for large PEBS, which was introduced in: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") When the PEBS interrupt threshold is larger than one, there is no way to get exact auto-reload times and value for userspace RDPMC. Disable the userspace RDPMC usage when large PEBS is enabled. The only exception is when the PEBS interrupt threshold is 1, in which case user-space RDPMC works well even with auto-reload events. Signed-off-by:Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Kan Liang authored
Auto-reload events needs to be specially handled in event count read. Auto-reload is only available for intel_pmu. Signed-off-by:
-
Kan Liang authored
perf/x86/intel/ds: Introduce ->read() function for auto-reload events and flush the PEBS buffer there There is no way to get exact auto-reload times and values which are needed for event updates unless we flush the PEBS buffer. Introduce intel_pmu_auto_reload_read() to drain the PEBS buffer for auto reload event. To prevent races with the hardware, we can only call drain_pebs() when the PMU is disabled. Signed-off-by:
-
Kan Liang authored
Auto-reload needs to be specially handled when reading event counts. Signed-off-by:
-
Kan Liang authored
There is a bug when reading event->count with large PEBS enabled. Here is an example: # ./read_count 0x71f0 0x122c0 0x1000000001c54 0x100000001257d 0x200000000bdc5 In fixed period mode, the auto-reload mechanism could be enabled for PEBS events, but the calculation of event->count does not take the auto-reload values into account. Anyone who reads event->count will get the wrong result, e.g x86_pmu_read(). This bug was introduced with the auto-reload mechanism enabled since commit: 851559e3 ("perf/x86/intel: Use the PEBS auto reload mechanism when possible") Introduce intel_pmu_save_and_restart_reload() to calculate the event->count only for auto-reload. Since the counter increments a negative counter value and overflows on the sign switch, giving the interval: [-period, 0] the difference between two consequtive reads is: A) value2 - value1; when no overflows have happened in between, B) (0 - value1) + (value2 - (-period)); when one overflow happened in between, C) (0 - value1) + (n - 1) * (period) + (value2 - (-period)); when @n overflows happened in between. Here A) is the obvious difference, B) is the extension to the discrete interval, where the first term is to the top of the interval and the second term is from the bottom of the next interval and C) the extension to multiple intervals, where the middle term is the whole intervals covered. The equation for all cases is: value2 - value1 + n * period Previously the event->count is updated right before the sample output. But for case A, there is no PEBS record ready. It needs to be specially handled. Remove the auto-reload code from x86_perf_event_set_period() since we'll not longer call that function in this case. Based-on-code-from: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Kan Liang authored
The PMU is disabled in intel_pmu_handle_irq(), but cpuc->enabled is not updated accordingly. This is fine in current usage because no-one checks it - but fix it for future code: for example, the drain_pebs() will be modified to fix an auto-reload bug. Properly save/restore the old PMU state. Signed-off-by:
-
Kan Liang authored
Large fixed period values could be truncated on Broadwell, for example: perf record -e cycles -c 10000000000 Here the fixed period is 0x2540BE400, but the period which finally applied is 0x540BE400 - which is wrong. The reason is that x86_pmu::limit_period() uses an u32 parameter, so the high 32 bits of 'period' get truncated. This bug was introduced in: commit 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") It's safe to use u64 instead of u32: - Although the 'left' is s64, the value of 'left' must be positive when calling limit_period(). - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch the higher 32 bits. Signed-off-by:
-
- 08 Mar, 2018 30 commits
-
-
Stephane Eranian authored
This patch updates the links to the Quipper library. It is now available from GitHub and has been updated. Reported-by:
Lakshman Annadorai <lakshmana@google.com> Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.comSigned-off-by:
-
Thomas Richter authored
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Jin Yao authored
Unlike the perf report interactive annotate mode, the perf annotate doesn't display the IPC/Cycle even if branch info is recorded in perf data file. perf record -b ... perf annotate function It should show IPC/cycle, but it doesn't. This patch lets perf annotate support the displaying of IPC/Cycle if branch info is in perf data. For example, perf annotate compute_flag Percent│ IPC Cycle │ │ │ Disassembly of section .text: │ │ 0000000000400640 <compute_flag>: │ compute_flag(): │ volatile int count; │ static unsigned int s_randseed; │ │ __attribute__((noinline)) │ int compute_flag() │ { 22.96 │1.18 584 sub $0x8,%rsp │ int i; │ │ i = rand() % 2; 23.02 │1.18 1 → callq rand@plt │ │ return i; 27.05 │3.37 mov %eax,%edx │ } │3.37 add $0x8,%rsp │ { │ int i; │ │ i = rand() % 2; │ │ return i; │3.37 shr $0x1f,%edx │3.37 add %edx,%eax │3.37 and $0x1,%eax │3.37 sub %edx,%eax │ } 26.97 │3.37 2 ← retq Note that, this patch only supports TUI mode. For stdio, now it just keeps original behavior. Will support it in a follow-up patch. $ perf annotate compute_flag --stdio Percent | Source code & Disassembly of div for cycles:ppp (7993 samples) ------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000400640 <compute_flag>: : compute_flag(): : volatile int count; : static unsigned int s_randseed; : : __attribute__((noinline)) : int compute_flag() : { 0.29 : 400640: sub $0x8,%rsp # +100.00% : int i; : : i = rand() % 2; 42.93 : 400644: callq 400490 <rand@plt> # -100.00% (p:100.00%) : : return i; 0.10 : 400649: mov %eax,%edx # +100.00% : } 0.94 : 40064b: add $0x8,%rsp : { : int i; : : i = rand() % 2; : : return i; 27.02 : 40064f: shr $0x1f,%edx 0.15 : 400652: add %edx,%eax 1.24 : 400654: and $0x1,%eax 2.08 : 400657: sub %edx,%eax : } 25.26 : 400659: retq # -100.00% (p:100.00%) Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Acked-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20180223170210.GC7045@tassilo.jf.intel.com Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1519724327-7773-1-git-send-email-yao.jin@linux.intel.comSigned-off-by:
-
Wang YanQing authored
So that beautifiers wanting to resolve kernel function addresses to names can do its work, and when we use "perf report" for output of "perf kmem record", we will get kernel symbol output. This patch affect the output of "perf report" for the record data generated by "perf kmem record" looks like below: Before patch: 0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC 0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO After patch: 0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO 0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC Signed-off-by:
Wang YanQing <udknight@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by:
-
Jiri Olsa authored
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by:
-
Jiri Olsa authored
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by:
-
Jiri Olsa authored
We have some .cpp files, make ctags/cscope aware of them. Signed-off-by:
-
Jiri Olsa authored
Adding MEM_TOPOLOGY feature to perf data file, that will carry physical memory map and its node assignments. The format of data in MEM_TOPOLOGY is as follows: 0 - version | for future changes 8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes 16 - count | number of nodes For each node we store map of physical indexes for each node: 32 - node id | node index 40 - size | size of bitmap 48 - bitmap | bitmap of memory indexes that belongs to node | /sys/devices/system/node/node<NODE>/memory<INDEX> The MEM_TOPOLOGY could be displayed with following report command: $ perf report --header-only -I ... # memory nodes (nr 1, block size 0x8000000): # 0 [7G]: 0-23,32-69 Signed-off-by: -
Jiri Olsa authored
Switch to refcnt logic instead of duplicating mem_info objects. No functional change, just saving some memory. Signed-off-by:
-
Jiri Olsa authored
It's passed along several hists entries in --hierarchy mode, so it's better we keep track of it. The current fail I see is that it gets removed in hierarchy --mem-mode mode, where it's shared in the different hierarchies, but removed from the template hist entry, so the report crashes. Signed-off-by:
-
Jiri Olsa authored
It's no longer used. Signed-off-by:
-
Jiri Olsa authored
It's used far more down to be declared on the top of the __cmd_record. Signed-off-by:
-
Jiri Olsa authored
Display more header info from perf.data file, following values: $ perf report -i perf.data --header-only ... # header version : 1 # data offset : 424 # data size : 3364280 # feat offset : 3364704 It's handy for debuging. Signed-off-by:
-
Jiri Olsa authored
Changing the output header for reporting forced groups via --groups option on non grouped events, like: $ perf record -e 'cycles,instructions' $ perf report --stdio --group Before: # Samples: 24 of event 'anon group { cycles:u, instructions:u }' After: # Samples: 24 of events 'cycles:u, instructions:u' Signed-off-by: -
Thomas Richter authored
'perf annotate' displays function call assembler instructions with a right arrow. Hitting enter on this line/instruction causes the browser to disassemble this target function and show it on the screen. On s390 this results in an error message 'The called function was not found.' The function call assembly line parsing does not handle the s390 bras and brasl instructions. Function call__parse expects the target as first operand: callq e9140 <__fxstat> S390 has a register number as first operand: brasl %r14,41d60 <abort> Therefore the target addresses on s390 are always zero which is an invalid address. Introduce a s390 specific call parsing function which skips the first operand on s390. Signed-off-by:
-
Adrian Hunter authored
Adjust overlap-checking to support sampling mode. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1520431349-30689-10-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
Intel PT code already has some preparation for AUX area sampling mode. However the implementation has changed from the first proposal and one of the side-effects is that it will not be impossible to support snapshot mode and sampling mode at the same time. Although there are no plans to support it, let validation (not yet implemented) control whether it is allowed rather than low-level functions. Signed-off-by:
-
Adrian Hunter authored
intel_pt_get_trace() fixes overlaps between the current buffer and the previous buffer ('old_buffer'). However the previous buffer might not have had usable data (no PSB) so the comparison must be made against the previous buffer that had usable data. Tidy that by keeping a pointer for that purpose in struct intel_pt_queue. Signed-off-by: -
Adrian Hunter authored
With the new way sampling support will be implemented, intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it. Signed-off-by:
-
Adrian Hunter authored
Tidy auxtrace_record__init_intel() slightly by recognizing that evlist is never NULL. Signed-off-by:
-
Adrian Hunter authored
timestamp_insn_cnt is used to estimate the timestamp based on the number of instructions since the last known timestamp. If the estimate is not accurate enough decoding might not be correctly synchronized with side-band events causing more trace errors. However there are always timestamps following an overflow, so the estimate is not needed and can indeed result in more errors. Suppress the estimate by setting timestamp_insn_cnt to zero. Signed-off-by:
-
Adrian Hunter authored
When a TIP packet is expected but there is a different packet, it is an error. However the unexpected packet might be something important like a TSC packet, so after the error, it is necessary to continue from there, rather than the next packet. That is achieved by setting pkt_step to zero. Signed-off-by:
-
Adrian Hunter authored
sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. The flag when sync_switch is enabled was global to the decoding, whereas it is really specific to the CPU. The trace data for different CPUs is put on different queues, so add sync_switch to the intel_pt_queue structure and use that in preference to the global setting in the intel_pt structure. That fixes problems decoding one CPU's trace because sync_switch was disabled on a different CPU's queue. Signed-off-by:
-
Adrian Hunter authored
Overlap detection was not not updating the buffer's 'consecutive' flag. Marking buffers consecutive has the advantage that decoding begins from the start of the buffer instead of the first PSB. Fix overlap detection to identify consecutive buffers correctly. Signed-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments to perf_mmap__read_init(). The data is stored in the struct perf_mmap. Discard the parameters. Signed-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument to perf_mmap__read_event(). Discard them. Signed-off-by:
-
Kan Liang authored
It isn't necessary to pass the 'overwrite' argument to perf_mmap__consume(). Discard it. Signed-off-by:
-
Kan Liang authored
The 'overwrite' is set at allocation. It will not be changed. Using it to replace the parameter of perf_mmap__consume(). The parameters will be discarded later. No functional change. Signed-off-by:
-
Kan Liang authored
Using the 'start', 'end' and 'overwrite' which are stored in struct perf_mmap to replace the parameters of perf_mmap__read_event(). The parameters will be discarded later. No functional change. Signed-off-by:
-
