- 31 Dec, 2021 14 commits
-
-
Jie Wang authored
This patch uses common cmdq init and uninit APIs to replace the old APIs in PF cmdq module init and uninit modules. Then the old PF init and uninit APIs is deleted. Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jie Wang authored
The PF and VF cmdq init and uninit APIs are also almost same espect the suffixes of API names. This patch creates common cmdq init and uninit APIs needed by PF and VF cmdq modules. The next patch will use the new unified APIs to replace init and uninit APIs in PF module. Signed-off-by:
-
Jie Wang authored
This patch uses common cmdq resource allocate/free/query APIs to replace the old APIs in VF cmdq module and deletes the old cmdq resource APIs. Still we kept hclgevf_cmd_setup_basic_desc name as a seam API to avoid too many meaningless replacement. Signed-off-by:
-
Jie Wang authored
This patch uses common cmdq resource allocate/free/query APIs to replace the old APIs in PF cmdq module and deletes the old cmdq resource APIs. Still we kept hclge_cmd_setup_basic_desc name as a seam API to avoid too many meaningless replacement. Signed-off-by:
-
Jie Wang authored
The PF and VF cmdq module resource allocate/free/query APIs are almost the same espect the suffixes of API names. These same implementations bring double development and bugfix work. This patch creates common cmdq resource allocate/free/query APIs called by PF and VF cmdq init/uninit APIs. The next patch will use the new unified APIs to replace init/uninit APIs. Signed-off-by:
-
Jie Wang authored
This patch firstly uses new hardware description struct hclge_comm_hw as child member of hclgevf_hw and deletes the old hardware description child members. All the hclgevf_hw variables used in VF module is modified according to the new hclgevf_hw. Secondly hclgevf_cmd_send is refactored to use hclge_comm_cmd_send APIs. The old functions called by hclgevf_cmd_send are all deleted. Still we kept hclgevf_cmd_send to avoid too many meaningless modifications. Signed-off-by:
-
Jie Wang authored
This patch firstly uses new hardware description struct hclge_comm_hw as child member of hclge_hw and deletes the original child memebers of hclge_hw. All the hclge_hw variables used in PF module is modified according to the new hclge_hw. Secondly hclge_cmd_send is refactored to use hclge_comm_cmd_send APIs. The old functions called by hclge_cmd_send are deleted and hclge_cmd_send is kept to avoid too many meaningless modifications. Signed-off-by:
-
Jie Wang authored
This patch create new set of unified hclge_comm_cmd_send APIs for PF and VF cmdq module. Subfunctions called by hclge_comm_cmd_send are also created include cmdq result check, cmdq return code conversion and ring space opertaion APIs. These new common cmdq APIs will be used to replace the old PF and VF cmdq APIs in next patches. Signed-off-by:
-
Jie Wang authored
This patch use new common struct hclge_desc to replace struct hclgevf_desc in VF cmdq module and then delete the old struct hclgevf_desc. Signed-off-by:
-
Jie Wang authored
Currently PF and VF cmdq APIs use struct hclge(vf)_hw to describe cmdq hardware information needed by hclge(vf)_cmd_send. There are a little differences between its child struct hclge_cmq_ring and hclgevf_cmq_ring. It is redundent to use two sets of structures to support same functions. So this patch creates new set of common cmdq hardware description structures(hclge_comm_hw) to unify PF and VF cmdq functions. The struct hclge_desc is still kept to avoid too many meaningless replacement. These new structures will be used to unify hclge(vf)_hw structures in PF and VF cmdq APIs in next patches. Signed-off-by:
-
Jie Wang authored
Currently we plan to refactor PF and VF cmdq module. A new file folder hns3_common will be created to store new common APIs used by PF and VF cmdq module. Thus the PF and VF compilation process will both depends on the hns3_common. This may cause parallel building problems if we add a new makefile building unit. So this patch combined the PF and VF makefile scripts to the top level makefile to support the new hns3_common which will be created in the next patch. Signed-off-by:
-
Rafał Miłecki authored
1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs. 2. Add helper for handling non-lineral port <-> reg mappings. 3. Add support for 12 B LED reg blocks on BCM4908 (different layout) Complete support for LEDs setup will be implemented once Linux receives a proper design & implementation for "hardware" LEDs. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lukas Bulwahn authored
Commit d64c2a76 ("staging: irda: remove the irda network stack and drivers") removes the config IRDA. Remove the remaining references to this non-existing config in the network header files. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211229113620.19368-1-lukas.bulwahn@gmail.comSigned-off-by:
-
Colin Ian King authored
Variable i is being assigned a value that is never read, the assignment is redundant and can be removed. Cleans up clang-scan build warning: drivers/nfc/st21nfca/i2c.c:319:4: warning: Value stored to 'i' is never read [deadcode.DeadStores] i = 0; Signed-off-by:Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211230161230.428457-1-colin.i.king@gmail.comSigned-off-by:
-
- 30 Dec, 2021 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c commit 077cdda7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") commit 31108d14 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") commit 4390c6ed ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/ net/smc/smc_wr.c commit 49dc9013 ("net/smc: Use the bitmap API when applicable") commit 349d4312 ("net/smc: fix kernel panic caused by race of smc_sock") bitmap_zero()/memset() is removed by the fix Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from.. Santa? No regressions on our radar at this point. The igc problem fixed here was the last one I was tracking but it was broken in previous releases, anyway. Mostly driver fixes and a couple of largish SMC fixes. Current release - regressions: - xsk: initialise xskb free_list_node, fixup for a -rc7 fix Current release - new code bugs: - mlx5: handful of minor fixes: - use first online CPU instead of hard coded CPU - fix some error handling paths in 'mlx5e_tc_add_fdb_flow()' - fix skb memory leak when TC classifier action offloads are disabled - fix memory leak with rules with internal OvS port Previous releases - regressions: - igc: do not enable crosstimestamping for i225-V models Previous releases - always broken: - udp: use datalen to cap ipv6 udp max gso segments - fix use-after-free in tw_timer_handler due to early free of stats - smc: fix kernel panic caused by race of smc_sock - smc: don't send CDC/LLC message if link not ready, avoid timeouts - sctp: use call_rcu to free endpoint, avoid UAF in sock diag - bridge: mcast: add and enforce query interval minimum - usb: pegasus: do not drop long Ethernet frames - mlx5e: fix ICOSQ recovery flow for XSK - nfc: uapi: use kernel size_t to fix user-space builds" * tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) fsl/fman: Fix missing put_device() call in fman_port_probe selftests: net: using ping6 for IPv6 in udpgro_fwd.sh Documentation: fix outdated interpretation of ip_no_pmtu_disc net/ncsi: check for error return from call to nla_put_u32 net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper net: fix use-after-free in tw_timer_handler selftests: net: Fix a typo in udpgro_fwd.sh selftests/net: udpgso_bench_tx: fix dst ip argument net: bridge: mcast: add and enforce startup query interval minimum net: bridge: mcast: add and enforce query interval minimum ipv6: raw: check passed optlen before reading xsk: Initialise xskb free_list_node net/mlx5e: Fix wrong features assignment in case of error net/mlx5e: TC, Fix memory leak with rules with internal port ionic: Initialize the 'lif->dbid_inuse' bitmap igc: Fix TX timestamp support for non-MSI-X platforms igc: Do not enable crosstimestamping for i225-V models net/smc: fix kernel panic caused by race of smc_sock net/smc: don't send CDC/LLC message if link not ready NFC: st21nfca: Fix memory leak in device probe and remove ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are two misc driver fixes for 5.16-final: - binder accounting fix to resolve reported problem - nitro_enclaves fix for mmap assert warning output Both of these have been for over a week with no reported issues" * tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert binder: fix async_free_space accounting for empty parcels
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.16 to resolve some reported problems: - mtu3 driver fixes - typec ucsi driver fix - xhci driver quirk added - usb gadget f_fs fix for reported crash All of these have been in linux-next for a while with no reported problems" * tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Only check the contract if there is a connection xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set. usb: mtu3: set interval of FS intr and isoc endpoint usb: mtu3: fix list_head check warning usb: mtu3: add memory barrier before set GPD's HWO usb: mtu3: fix interval value for intr and isoc usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
-
Miaoqian Lin authored
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the and error handling paths. Fixes: 18a6c85f ("fsl/fman: Add FMan Port Support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Using the bitmap API is less verbose than hand writing them. It also improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Jianguo Wu authored
udpgro_fwd.sh output following message: ping: 2001:db8:1::100: Address family for hostname not supported Using ping6 when pinging IPv6 addresses. Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
-
luo penghao authored
The assignment here will be overwritten, so it should be deleted The clang_analyzer complains as follows: net/ethtool/netlink.c: Value stored to 'ret' is never read Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
luo penghao <luo.penghao@zte.com.cn> Signed-off-by:
-
xu xin authored
The updating way of pmtu has changed, but documentation is still in the old way. So this patch updates the interpretation of ip_no_pmtu_disc and min_pmtu. See commit 28d35bcd ("net: ipv4: don't let PMTU updates increase route MTU") Reported-by:
xu xin <xu.xin16@zte.com.cn> Signed-off-by:
-
Aleksander Jan Bajkowski authored
As reported by checkpatch.pl, no space is necessary after a cast. Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
checkpatch.pl complains as the following: Alignment should match open parenthesis Signed-off-by:
-
Aleksander Jan Bajkowski authored
Documentation/process/coding-style.rst says (in line 88) "Don't put multiple assignments on a single line either." This patch fixes the coding style issue reported by checkpatch.pl. Signed-off-by:
-
Aleksander Jan Bajkowski authored
Add () around macro argument to avoid precedence issues Signed-off-by:
-
Aleksander Jan Bajkowski authored
strlcpy is marked as deprecated in Documentation/process/deprecated.rst, and there is no functional difference when the caller expects truncation (when not checking the return value). strscpy is relatively better as it also avoids scanning the whole source string. This silences the related checkpatch warnings from: commit 5dbdb2d8 ("checkpatch: prefer strscpy to strlcpy") Signed-off-by:
-
Kiran Patil authored
Add support to enable flow-director filter when multiple TCs are configured. Flow director filter can be configured using ethtool (--config-ntuple option). When multiple TCs are configured, each TC is mapped to an unique HW VSI. So VSI corresponding to queue used in filter is identified and flow director context is updated with correct VSI while configuring ntuple filter in HW. Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by:
Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by:
Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller authored
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-12-29 Ruud Bos says: The igb driver provides support for PEROUT and EXTTS pin functions that allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we are using the PEROUT function to feed a PTP corrected 1pps signal into an FPGA as cross system synchronized time source. Support for the PEROUT and EXTTS SDP functions is currently limited to i210/i211 based adapters. This patch series enables these functions also for 82580/i354/i350 based ones. Because the time registers of these adapters do not have the nice split in second rollovers as the i210 has, the implementation is slightly more complex compared to the i210 implementation. The PEROUT function has been successfully tested on an i350 based ethernet adapter. Using the following user space code excerpt, the driver outputs a PTP corrected 1pps signal on the SDP0 pin of an i350: struct ptp_pin_desc desc; memset(&desc, 0, sizeof(desc)); desc.index = 0; desc.func = PTP_PF_PEROUT; desc.chan = 0; if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) { struct timespec ts; if (clock_gettime(clkid, &ts) == 0) { struct ptp_perout_request rq; memset(&rq, 0, sizeof(rq)); rq.index = 0; rq.start.sec = ts.tv_sec + 1; rq.start.nsec = 500000000; rq.period.sec = 1; rq.period.nsec = 0; if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) { /* 1pps signal is now available on SDP0 */ } } } The added EXTTS function has not been tested. However, looking at the data sheets, the layout of the registers involved match the i210 exactly except for the time registers mentioned before. Hence the almost identical implementation. --- Note: I made changes to fix RCT and checkpatch messages regarding unnecessary parenthesis. ==================== Acked-by:Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Yevhen Orlov says: ==================== prestera: add basic router driver support Add initial router support for Marvell Prestera driver. Subscribe on inetaddr notifications. TRAP packets, that has to be routed (if packet has router's destination MAC address). Add features: - Support ip address adding on port. e.g.: "ip address add PORT 1.1.1.1/24" Limitations: - Only regular port supported. Vlan will be added soon. - It is routing through CPU. Offloading will be added in next patches. Co-developed-by:
Taras Chornyi <tchornyi@marvell.com> Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Changes for v2: * Remove useless assignment ==================== Signed-off-by:
-
Yevhen Orlov authored
Add inetaddr notifiers to support add/del IPv4 address on switchdev port. We create TRAP on first address, added on port and delete TRAP, when last address removed. Currently, driver supports only regular port to became routed. Other port type support will be added later Co-developed-by:
-
Yevhen Orlov authored
Initial implementation of notification handlers. For now this is just stub. So that we can move forward and add prestera_router_hw's objects manipulations. We support several addresses on interface. We just have nothing to do for second address, because rif is already enabled on this interface, after first one. Co-developed-by:
-
Yevhen Orlov authored
Add prestera_router_hw.c. This file contains functions, which track HW objects relations and links. This include implicity creation of objects, that needed by requested one and implicity removing of objects, which reference counter is became zero. We need this layer, because kernel callbacks not always mapped to creation of single HW object. So let it be two different layers - one for subscribing and parsing kernel structures, and another (prestera_router_hw.c) for HW objects relations tracking. There is two types of objects on router_hw layer: - Explicit objects (rif_entry) : created by higher layer. - Implicit objects (vr) : created on demand by explicit objects. Co-developed-by:
-
Yevhen Orlov authored
Add prestera_router.c, which contains code to subscribe/unsubscribe on kernel notifiers for router. This handle kernel notifications, parse structures to make key to manipulate prestera_router_hw's objects. Also prestera_router is container for router's objects database. Co-developed-by:
-
Yevhen Orlov authored
Add functions to enable routing on port, which is not in vlan. Also we can enable routing on vlan. prestera_hw_rif_create() take index of allocated virtual router. Co-developed-by:
-
Yevhen Orlov authored
Add functions and structures to allocate virtual router. prestera_hw_vr_create() return index of allocated VR so that we can move forward and also add another objects (e.g. router interface), which has link to VR. Co-developed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-12-28 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix wrong features assignment in case of error net/mlx5e: TC, Fix memory leak with rules with internal port ==================== Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.orgSigned-off-by:
-
Jiasheng Jiang authored
As we can see from the comment of the nla_put() that it could return -EMSGSIZE if the tailroom of the skb is insufficient. Therefore, it should be better to check the return value of the nla_put_u32 and return the error code if error accurs. Also, there are many other functions have the same problem, and if this patch is correct, I will commit a new version to fix all. Fixes: 955dc68c ("net/ncsi: Add generic netlink family") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cnSigned-off-by:
-
Conley Lee authored
Thanks for your review. Here is the new version for this patch. This patch adds support for the emac rx dma present on sun4i. The emac is able to move packets from rx fifo to RAM by using dma. Change since v4. - rename sbk field to skb - rename alloc_emac_dma_req to emac_alloc_dma_req - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid sleeping - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails - fix some code style issues Change since v5. - fix some code style issue Signed-off-by:Conley Lee <conleylee@foxmail.com> Link: https://lore.kernel.org/r/tencent_DE05ADA53D5B084D4605BE6CB11E49EF7408@qq.comSigned-off-by:
-
