Pull sound fixes from Takashi Iwai:
 "Again it became bigger than wished, unfortunately, as this contains
  quite a few ASoC fixes that came up a bit late. It also includes yet
  more HD- and USB-audio quirks: I decided to merge them now, as those
  are for stable, and we'll need them sooner or later.

  Although the volumes are a bit high, all changes are device-specific
  (and reasonably small) fixes, so it should be safe for the late rc"

* tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix microphone sound on Jieli webcam.
  ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers
  ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
  ALSA: hda/realtek: Add quirk for Clevo PC50HS
  ALSA: usb-audio: add Schiit Hel device to quirk table
  ASoC: wm8960: Fix clock configuration on slave mode
  ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets
  ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked()
  ASoC: codec: wcd938x: Add irq config support
  ASoC: DAPM: Fix missing kctl change notifications
  ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation
  ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()
  ASoC: Intel: bytcht_es8316: Use temporary variable for struct device
  ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()
  ASoC: wcd938x: Fix jack detection issue
  ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working
  ASoC: cs4341: Add SPI device ID table
  ASoC: pcm179x: Add missing entries SPI to device ID table
  ASoC: fsl_xcvr: Fix channel swap issue with ARC
  ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers

Pull audit fix from Paul Moore:
 "One small audit patch to add a pointer NULL check"

* tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix possible null-pointer dereference in audit_filter_rules

Pull tracing fix from Steven Rostedt:
 "Recursion fix for tracing.

  While cleaning up some of the tracing recursion protection logic, I
  discovered a scenario that the current design would miss, and would
  allow an infinite recursion. Removing an optimization trick that
  opened the hole fixes the issue and cleans up the code as well"

* tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have all levels of checks prevent recursion

Merge tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

Pull nios2 fix from Dinh Nguyen:

 - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning

* tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  NIOS2: irqflags: rename a redefined register name

Pull kvm fixes from Paolo Bonzini:
 "Tools:
   - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic

  x86:
   - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps
   - two fixes for SEV-ES (one more coming as soon as I get reviews)
   - fix for static_key underflow

  ARM:
   - Properly refcount pages used as a concatenated stage-2 PGD
   - Fix missing unlock when detecting the use of MTE+VM_SHARED"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SEV-ES: reduce ghcb_sa_len to 32 bits
  KVM: VMX: Remove redundant handling of bus lock vmexit
  KVM: kvm_stat: do not show halt_wait_ns
  KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload
  Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET"
  KVM: SEV-ES: Set guest_state_protected after VMSA update
  KVM: X86: fix lazy allocation of rmaps
  KVM: SEV-ES: fix length of string I/O
  KVM: arm64: Release mmap_lock when using VM_SHARED with MTE
  KVM: arm64: Report corrupted refcount at EL2
  KVM: arm64: Fix host stage-2 PGD refcount
  KVM: s390: Function documentation fixes

Merge misc fixes from Andrew Morton:
 "19 patches.

  Subsystems affected by this patch series: mm (userfaultfd, migration,
  memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs,
  and misc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: add Andrej Shadura
  mm/thp: decrease nr_thps in file's mapping on THP split
  mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem()
  vfs: check fd has read access in kernel_read_file_from_fd()
  elfcore: correct reference to CONFIG_UML
  mm, slub: fix incorrect memcg slab count for bulk free
  mm, slub: fix potential use-after-free in slab_debugfs_fops
  mm, slub: fix potential memoryleak in kmem_cache_open()
  mm, slub: fix mismatch between reconstructed freelist depth and cnt
  mm, slub: fix two bugs in slab_debug_trace_open()
  mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
  memblock: check memory total_size
  ocfs2: mount fails with buffer overflow in strlen
  ocfs2: fix data corruption after conversion from inline format
  mm/migrate: fix CPUHP state to update node demotion order
  mm/migrate: add CPU hotplug to demotion #ifdef
  mm/migrate: optimize hotplug-time demotion order updates
  userfaultfd: fix a race between writeprotect and exit_mmap()
  mm/userfaultfd: selftests: fix memory corruption with thp enabled

Add a mapping for my old work email for BelDisplayTech to the personal
email, and make sure the Collabora email has the correct spelling of the
first name.

Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.ukSigned-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Decrease nr_thps counter in file's mapping to ensure that the page cache
won't be dropped excessively on file write access if page has been
already split.

I've tried a test scenario running a big binary, kernel remaps it with
THPs, then force a THP split with /sys/kernel/debug/split_huge_pages.
During any further open of that binary with O_RDWR or O_WRITEONLY kernel
drops page cache for it, because of non-zero thps counter.

Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.comSigned-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 09d91cda ("mm,thp: avoid writes to file with THP in pagecache")
Fixes: 06d3eff6 ("mm/thp: fix node page state in split_huge_page_to_list()")
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <sfoon.kim@samsung.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Check for a NULL page->mapping before dereferencing the mapping in
page_is_secretmem(), as the page's mapping can be nullified while gup()
is running, e.g.  by reclaim or truncation.

  BUG: kernel NULL pointer dereference, address: 0000000000000068
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G        W
  RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0
  Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be
  RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046
  RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900
  ...
  CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0
  Call Trace:
   get_user_pages_fast_only+0x13/0x20
   hva_to_pfn+0xa9/0x3e0
   try_async_pf+0xa1/0x270
   direct_page_fault+0x113/0xad0
   kvm_mmu_page_fault+0x69/0x680
   vmx_handle_exit+0xe1/0x5d0
   kvm_arch_vcpu_ioctl_run+0xd81/0x1c70
   kvm_vcpu_ioctl+0x267/0x670
   __x64_sys_ioctl+0x83/0xa0
   do_syscall_64+0x56/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com
Fixes: 1507f512 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Stephen <stephenackerman16@gmail.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we open a file without read access and then pass the fd to a syscall
whose implementation calls kernel_read_file_from_fd(), we get a warning
from __kernel_read():

        if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ)))

This currently affects both finit_module() and kexec_file_load(), but it
could affect other syscalls in the future.

Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org
Fixes: b844f0ec ("vfs: define kernel_copy_file_from_fd()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6e7b64b9 ("elfcore: fix building with clang") introduces
special handling for two architectures, ia64 and User Mode Linux.
However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig
symbol for User-Mode Linux was used.

Although the directory for User Mode Linux is ./arch/um; the Kconfig
symbol for this architecture is called CONFIG_UML.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

  UM
  Referencing files: include/linux/elfcore.h
  Similar symbols: UML, NUMA

Correct the name of the config to the intended one.

[akpm@linux-foundation.org: fix um/x86_64, per Catalin]
  Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com
  Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com

Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com
Fixes: 6e7b64b9 ("elfcore: fix building with clang")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Barret Rhoden <brho@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects
when doing bulk free.  So we shouldn't call memcg_slab_free_hook() again
for bulk free to avoid incorrect memcg slab count.

Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com
Fixes: d1b2cf6c ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s
because s will be freed soon.  And slab_debugfs_fops will use s later
leading to a use-after-free.

Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com
Fixes: 64dd6849 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In error path, the random_seq of slub cache might be leaked.  Fix this
by using __kmem_cache_release() to release all the relevant resources.

Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com
Fixes: 210e7a43 ("mm: SLUB freelist randomization")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If object's reuse is delayed, it will be excluded from the reconstructed
freelist.  But we forgot to adjust the cnt accordingly.  So there will
be a mismatch between reconstructed freelist depth and cnt.  This will
lead to free_debug_processing() complaining about freelist count or a
incorrect slub inuse count.

Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com
Fixes: c3895391 ("kasan, slub: fix handling of kasan_slab_free hook")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Fixups for slub".

This series contains various bug fixes for slub.  We fix memoryleak,
use-afer-free, NULL pointer dereferencing and so on in slub.  More
details can be found in the respective changelogs.

This patch (of 5):

It's possible that __seq_open_private() will return NULL.  So we should
check it before using lest dereferencing NULL pointer.  And in error
paths, we forgot to release private buffer via seq_release_private().
Memory will leak in these paths.

Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com
Fixes: 64dd6849 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot reported access to unitialized memory in mbind() [1]

Issue came with commit bda420b9 ("numa balancing: migrate on fault
among multiple bound nodes")

This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()

This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()

  [1]
  BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   mpol_equal include/linux/mempolicy.h:105 [inline]
   vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
   mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
   do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  Uninit was created at:
   slab_alloc_node mm/slub.c:3221 [inline]
   slab_alloc mm/slub.c:3230 [inline]
   kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
   mpol_new mm/mempolicy.c:293 [inline]
   do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  =====================================================
  Kernel panic - not syncing: panic_on_kmsan set ...
  CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G    B             5.15.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
   dump_stack+0x25/0x28 lib/dump_stack.c:113
   panic+0x44f/0xdeb kernel/panic.c:232
   kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
   __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
   __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
   mpol_equal include/linux/mempolicy.h:105 [inline]
   vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
   mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
   do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
   kernel_mbind mm/mempolicy.c:1483 [inline]
   __do_sys_mbind mm/mempolicy.c:1490 [inline]
   __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
   __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
   do_syscall_x64 arch/x86/entry/common.c:51 [inline]
   do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com
Fixes: bda420b9 ("numa balancing: migrate on fault among multiple bound nodes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem=[X][G|M] is broken on ARM64 platform, there are cases that even
type.cnt is 1, but total_size is not 0 because regions are merged into
1.  So only check 'cnt' is not enough, total_size should be used,
othersize bootargs 'mem=[X][G|B]' not work anymore.

Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com
Fixes: e888fa7b ("memblock: Check memory add/cap ordering")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below.  Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated.  This causes a read outside of the source string
triggering the buffer overflow detection.

  detected buffer overflow in strlen
  ------------[ cut here ]------------
  kernel BUG at lib/string.c:1149!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
    Debian 5.14.6-2
  RIP: 0010:fortify_panic+0xf/0x11
  ...
  Call Trace:
   ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
   ocfs2_fill_super+0x359/0x19b0 [ocfs2]
   mount_bdev+0x185/0x1b0
   legacy_get_tree+0x27/0x40
   vfs_get_tree+0x25/0xb0
   path_mount+0x454/0xa20
   __x64_sys_mount+0x103/0x140
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hrSigned-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6dbf7bb5 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.

The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster.  However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.

This oversight was fixed by commit 693c241a ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.

After commit 6dbf7bb5, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty.  So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean.  So data
written to these pages is lost once pages are reclaimed.

Simple reproducer for the problem is:

  xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
    -c "pwrite 4000 2000" ocfs2_file

After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.

Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.

[akpm@linux-foundation.org: fix whitespace, per Joseph]

Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz
Fixes: 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: "Markov, Andrey" <Markov.Andrey@Dell.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The node demotion order needs to be updated during CPU hotplug.  Because
whether a NUMA node has CPU may influence the demotion order.  The
update function should be called during CPU online/offline after the
node_states[N_CPU] has been updated.  That is done in
CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during
CPU offline.  But in commit 884a6e5d ("mm/migrate: update node
demotion order on hotplug events"), the function to update node demotion
order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline.  This
doesn't satisfy the order requirement.

For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0
and P2, P3 in S1), the demotion order is

 - S0 -> NUMA_NO_NODE
 - S1 -> NUMA_NO_NODE

After P2 and P3 is offlined, because S1 has no CPU now, the demotion
order should have been changed to

 - S0 -> S1
 - S1 -> NO_NODE

but it isn't changed, because the order updating callback for CPU
hotplug doesn't see the new nodemask.  After that, if P1 is offlined,
the demotion order is changed to the expected order as above.

So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and
CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and
CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the
update function on them.

Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com
Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Once upon a time, the node demotion updates were driven solely by memory
hotplug events.  But now, there are handlers for both CPU and memory
hotplug.

However, the #ifdef around the code checks only memory hotplug.  A
system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU
hotplug events.

Update the #ifdef around the common code.  Add memory and CPU-specific
#ifdefs for their handlers.  These memory/CPU #ifdefs avoid unused
function warnings when their Kconfig option is off.

[arnd@arndb.de: rework hotplug_memory_notifier() stub]
  Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org

Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com
Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2.

This contains two fixes for the "automatic demotion" code which was
merged into 5.15:

 * Fix memory hotplug performance regression by watching
   suppressing any real action on irrelevant hotplug events.

 * Ensure CPU hotplug handler is registered when memory hotplug
   is disabled.

This patch (of 2):

== tl;dr ==

Automatic demotion opted for a simple, lazy approach to handling hotplug
events.  This noticeably slows down memory hotplug[1].  Optimize away
updates to the demotion order when memory hotplug events should have no
effect.

This has no effect on CPU hotplug.  There is no known problem on the CPU
side and any work there will be in a separate series.

== Background ==

Automatic demotion is a memory migration strategy to ensure that new
allocations have room in faster memory tiers on tiered memory systems.
The kernel maintains an array (node_demotion[]) to drive these
migrations.

The node_demotion[] path is calculated by starting at nodes with CPUs
and then "walking" to nodes with memory.  Only hotplug events which
online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will
actually affect the migration order.

== Problem ==

However, the current code is lazy.  It completely regenerates the
migration order on *any* CPU or memory hotplug event.  The logic was
that these events are extremely rare and that the overhead from
indiscriminate order regeneration is minimal.

Part of the update logic involves a synchronize_rcu(), which is a pretty
big hammer.  Its overhead was large enough to be detected by some 0day
tests that watch memory hotplug performance[1].

== Solution ==

Add a new helper (node_demotion_topo_changed()) which can differentiate
between superfluous and impactful hotplug events.  Skip the expensive
update operation for superfluous events.

== Aside: Locking ==

It took me a few moments to declare the locking to be safe enough for
node_demotion_topo_changed() to work.  It all hinges on the memory
hotplug lock:

During memory hotplug events, 'mem_hotplug_lock' is held for write.
This ensures that two memory hotplug events can not be called
simultaneously.

CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides
mutual exclusion between CPU hotplug events.  In addition, the demotion
code acquire and hold the mem_hotplug_lock for read during its CPU
hotplug handlers.  This provides mutual exclusion between the demotion
memory hotplug callbacks and the CPU hotplug callbacks.

This effectively allows treating the migration target generation code to
act as if it is single-threaded.

1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/

Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com
Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com
Fixes: 884a6e5d ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A race is possible when a process exits, its VMAs are removed by
exit_mmap() and at the same time userfaultfd_writeprotect() is called.

The race was detected by KASAN on a development kernel, but it appears
to be possible on vanilla kernels as well.

Use mmget_not_zero() to prevent the race as done in other userfaultfd
operations.

Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com
Fixes: 63b2d417 ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Signed-off-by: Nadav Amit <namit@vmware.com>
Tested-by: Li  Wang <liwang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In RHEL's gating selftests we've encountered memory corruption in the
uffd event test even with upstream kernel:

        # ./userfaultfd anon 128 4
        nr_pages: 32768, nr_pages_per_cpu: 32768
        bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729)
        bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877)
        bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699)
        bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196)
        testing uffd-wp with pagemap (pgsize=4096): done
        testing uffd-wp with pagemap (pgsize=2097152): done
        testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963)
        ERROR: faulting process failed (errno=0, line=1117)

It can be easily reproduced when global thp enabled, which is the
default for RHEL.

It's also known as a side effect of commit 0db282ba ("selftest: use
mmap instead of posix_memalign to allocate memory", 2021-07-23), which
is imho right itself on using mmap() to make sure the addresses will be
untagged even on arm.

The problem is, for each test we allocate buffers using two
allocate_area() calls.  We assumed these two buffers won't affect each
other, however they could, because mmap() could have found that the two
buffers are near each other and having the same VMA flags, so they got
merged into one VMA.

It won't be a big problem if thp is not enabled, but when thp is
agressively enabled it means when initializing the src buffer it could
accidentally setup part of the dest buffer too when there's a shared THP
that overlaps the two regions.  Then some of the dest buffer won't be
able to be trapped by userfaultfd missing mode, then it'll cause memory
corruption as described.

To fix it, do release_pages() after initializing the src buffer.

Since the previous two release_pages() calls are after
uffd_test_ctx_clear() which will unmap all the buffers anyway (which is
stronger than release pages; as unmap() also tear town pgtables), drop
them as they shouldn't really be anything useful.

We can mark the Fixes tag upon 0db282ba as it's reported to only
happen there, however the real "Fixes" IMHO should be 8ba6e864, as
before that commit we'll always do explicit release_pages() before
registration of uffd, and 8ba6e864 changed that logic by adding
extra unmap/map and we didn't release the pages at the right place.
Meanwhile I don't have a solid glue anyway on whether posix_memalign()
could always avoid triggering this bug, hence it's safer to attach this
fix to commit 8ba6e864.

Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com
Fixes: 8ba6e864 ("userfaultfd/selftests: reinitialize test context in each test")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Li Wang <liwan@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a Jieli Technology USB Webcam is connected, the video part works
well, but the mic sound is speeded up. On dmesg there are messages
about different rates from the runtime rates, warnings about volume
resolution and lastly, the log is filled, every 5 seconds, with
retire_capture_urb error messages.

The mic works only when ep packet size is set to wMaxPacketSize (normal
sound and no more retire_capture_urb error messages). Skipping reading
sample rate, fixes the messages about different rates and forcing a volume
resolution, fixes warnings about volume range. I have arbitrarily choosed
the value (16): I read in a comment that there should be no more than 255
levels, so 4096 (max volume) / 16 = 0-255.
Signed-off-by: Marco Giunta <giun7a@gmail.com>
Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix  possible null-pointer dereference in audit_filter_rules.

audit_filter_rules() error: we previously assumed 'ctx' could be null

Cc: stable@vger.kernel.org
Fixes: bf361231 ("audit: add saddr_fam filter field")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.

The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.

Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.

Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.

Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.

If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.

Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.

This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.

i.e.

 traced_function_1: [ more than one callback tracing it ]
   call loop_func

 loop_func:
   trace_recursion set internal bit
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 traced_function_2: [ only traced by above callback ]
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 [ wash, rinse, repeat, BOOM! out of shampoo! ]

Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.

Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.

 [*] There is on layer of recursion that is allowed, and that is to allow
     for the transition between interrupt context (normal -> softirq ->
     irq -> NMI), because a trace may occur before the context update is
     visible to the trace recursion logic.

Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15caf ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT),
so there is no need for it to be a u64.  This fixes a build error on 32-bit
systems:

i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io:
sev.c:(.text+0x110f): undefined reference to `__udivdi3'

Cc: stable@vger.kernel.org
Fixes: 019057bd ("KVM: SEV-ES: fix length of string I/O")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK
VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit
could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK.

We can remove redundant handling of bus lock vmexit. Unconditionally Set
exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with
KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit().
Signed-off-by: Hao Xiang <hao.xiang@linux.alibaba.com>
Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Similar to commit 111d0bda ("tools/kvm_stat: Exempt time-based
counters"), we should not show timer values in kvm_stat. Remove the new
halt_wait_ns.

Fixes: 87bcc5fa ("KVM: stats: Add halt_wait_ns stats for all architectures")
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Stefan Raspl <raspl@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

WARN if the static keys used to track if any vCPU has disabled its APIC
are left elevated at module exit.  Unlike the underflow case, nothing in
the static key infrastructure will complain if a key is left elevated,
and because an elevated key only affects performance, nothing in KVM will
fail if either key is improperly incremented.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211013003554.47705-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert a change to open code bits of kvm_lapic_set_base() when emulating
APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base
and apic_hw_disabled being unsyncrhonized when the APIC is created.  If
kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic()
will see the initialized-to-zero vcpu->arch.apic_base and decrement
apic_hw_disabled without KVM ever having incremented apic_hw_disabled.

Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a
potential future where KVM supports RESET outside of vCPU creation, in
which case all the side effects of kvm_lapic_set_base() are needed, e.g.
to handle the transition from x2APIC => xAPIC.

Alternatively, KVM could temporarily increment apic_hw_disabled (and call
kvm_lapic_set_base() at RESET), but that's a waste of cycles and would
impact the performance of other vCPUs and VMs.  The other subtle side
effect is that updating the xAPIC ID needs to be done at RESET regardless
of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs
an explicit call to kvm_apic_set_xapic_id() regardless of whether or not
kvm_lapic_set_base() also performs the update.  That makes stuffing the
enable bit at vCPU creation slightly more palatable, as doing so affects
only the apic_hw_disabled key.

Opportunistically tweak the comment to explicitly call out the connection
between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to
call out the need to always do kvm_apic_set_xapic_id() at RESET.

Underflow scenario:

  kvm_vm_ioctl() {
    kvm_vm_ioctl_create_vcpu() {
      kvm_arch_vcpu_create() {
        if (something_went_wrong)
          goto fail_free_lapic;
        /* vcpu->arch.apic_base is initialized when something_went_wrong is false. */
        kvm_vcpu_reset() {
          kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) {
            vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE;
          }
        }
        return 0;
      fail_free_lapic:
        kvm_free_lapic() {
          /* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */
          if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE))
            static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug.
        }
        return r;
      }
    }
  }

This (mostly) reverts commit 42122123.

Fixes: 42122123 ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET")
Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211013003554.47705-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The refactoring in commit bb18a677 ("KVM: SEV: Acquire
vcpu mutex when updating VMSA") left behind the assignment to
svm->vcpu.arch.guest_state_protected; add it back.
Signed-off-by: Peter Gonda <pgonda@google.com>
[Delta between v2 and v3 of Peter's patch, which had already been
 committed; the commit message is my own. - Paolo]
Fixes: bb18a677 ("KVM: SEV: Acquire vcpu mutex when updating VMSA")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If allocation of rmaps fails, but some of the pointers have already been written,
those pointers can be cleaned up when the memslot is freed, or even reused later
for another attempt at allocating the rmaps.  Therefore there is no need to
WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be
skipped lest KVM will overwrite the previous pointer and will indeed leak memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro
with the name "CTL_STATUS". Change the one in arch/nios2/ to be
"CTL_FSTATUS" (flags status) to eliminate the build warning.

In file included from ../drivers/mmc/host/tmio_mmc.c:22:
drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined
   31 | #define CTL_STATUS 0x1c
arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition
   14 | #define CTL_STATUS      0

Fixes: b31ebd80 ("nios2: Nios2 registers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull libata fixes from Damien Le Moal:
 "Two fixes for this cycle:

   - Fix a null pointer dereference in ahci-platform driver (from Hai)

   - Fix uninitialized variables in pata_legacy driver (from Dan)"

* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
  pata_legacy: fix a couple uninitialized variable bugs

Pull block fixes from Jens Axboe:
 "Bigger than usual for this point in time, the majority is fixing some
  issues around BDI lifetimes with the move from the request_queue to
  the disk in this release. In detail:

   - Series on draining fs IO for del_gendisk() (Christoph)

   - NVMe pull request via Christoph:
        - fix the abort command id (Keith Busch)
        - nvme: fix per-namespace chardev deletion (Adam Manzanares)

   - brd locking scope fix (Tetsuo)

   - BFQ fix (Paolo)"

* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
  block, bfq: reset last_bfqq_created on group change
  block: warn when putting the final reference on a registered disk
  brd: reduce the brd_devices_mutex scope
  kyber: avoid q->disk dereferences in trace points
  block: keep q_usage_counter in atomic mode after del_gendisk
  block: drain file system I/O on del_gendisk
  block: split bio_queue_enter from blk_queue_enter
  block: factor out a blk_try_enter_queue helper
  block: call submit_bio_checks under q_usage_counter
  nvme: fix per-namespace chardev deletion
  block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs
  nvme-pci: Fix abort command id

Pull io_uring fix from Jens Axboe:
 "Just a single fix for a wrong condition for grabbing a lock, a
  regression in this merge window"

* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
  io_uring: fix wrong condition to grab uring lock