- 25 May, 2022 16 commits
-
-
David Matlack authored
Include the value of the "VM-instruction error" field from the current VMCS (if any) in the error message for VMCLEAR and VMPTRLD, since each of these instructions may result in more than one VM-instruction error. Previously, this field was only reported for VMWRITE errors. Signed-off-by:
David Matlack <dmatlack@google.com> [Rebased and refactored code; dropped the error number for INVVPID and INVEPT; reworded commit message.] Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220510224035.1792952-1-jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Yanfei Xu authored
When kernel handles the vm-exit caused by external interrupts and NMI, it always sets kvm_intr_type to tell if it's dealing an IRQ or NMI. For the PMI scenario, it could be IRQ or NMI. However, intel_pt PMIs are only generated for HARDWARE perf events, and HARDWARE events are always configured to generate NMIs. Use kvm_handling_nmi_from_guest() to precisely identify if the intel_pt PMI came from the guest; this avoids false positives if an intel_pt PMI/NMI arrives while the host is handling an unrelated IRQ VM-Exit. Fixes: db215756 ("KVM: x86: More precisely identify NMI from guest when handling PMI") Signed-off-by:
Yanfei Xu <yanfei.xu@intel.com> Message-Id: <20220523140821.1345605-1-yanfei.xu@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Like Xu authored
Fixing side effect of the so-called opportunistic change in the commit. Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms") Signed-off-by:Like Xu <likexu@tencent.com> Message-Id: <20220518170118.66263-2-likexu@tencent.com> Signed-off-by:
-
Paolo Bonzini authored
Signed-off-by: -
Paolo Bonzini authored
Commit ddd7ed842627 ("x86/kvm: Alloc dummy async #PF token outside of raw spinlock") leads to the following Smatch static checker warning: arch/x86/kernel/kvm.c:212 kvm_async_pf_task_wake() warn: sleeping in atomic context arch/x86/kernel/kvm.c 202 raw_spin_lock(&b->lock); 203 n = _find_apf_task(b, token); 204 if (!n) { 205 /* 206 * Async #PF not yet handled, add a dummy entry for the token. 207 * Allocating the token must be down outside of the raw lock 208 * as the allocator is preemptible on PREEMPT_RT kernels. 209 */ 210 if (!dummy) { 211 raw_spin_unlock(&b->lock); --> 212 dummy = kzalloc(sizeof(*dummy), GFP_KERNEL); ^^^^^^^^^^ Smatch thinks the caller has preempt disabled. The `smdb.py preempt kvm_async_pf_task_wake` output call tree is: sysvec_kvm_asyncpf_interrupt() <- disables preempt -> __sysvec_kvm_asyncpf_interrupt() -> kvm_async_pf_task_wake() The caller is this: arch/x86/kernel/kvm.c 290 DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt) 291 { 292 struct pt_regs *old_regs = set_irq_regs(regs); 293 u32 token; 294 295 ack_APIC_irq(); 296 297 inc_irq_stat(irq_hv_callback_count); 298 299 if (__this_cpu_read(apf_reason.enabled)) { 300 token = __this_cpu_read(apf_reason.token); 301 kvm_async_pf_task_wake(token); 302 __this_cpu_write(apf_reason.token, 0); 303 wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1); 304 } 305 306 set_irq_regs(old_regs); 307 } The DEFINE_IDTENTRY_SYSVEC() is a wrapper that calls this function from the call_on_irqstack_cond(). It's inside the call_on_irqstack_cond() where preempt is disabled (unless it's already disabled). The irq_enter/exit_rcu() functions disable/enable preempt. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Wanpeng Li authored
The timer is disarmed when switching between TSC deadline and other modes; however, the pending timer is still in-flight, so let's accurately remove any traces of the previous mode. Fixes: 44275932 ("KVM: x86: thoroughly disarm LAPIC timer around TSC deadline switch") Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Sean Christopherson authored
Drop the raw spinlock in kvm_async_pf_task_wake() before allocating the the dummy async #PF token, the allocator is preemptible on PREEMPT_RT kernels and must not be called from truly atomic contexts. Opportunistically document why it's ok to loop on allocation failure, i.e. why the function won't get stuck in an infinite loop. Reported-by:
Yajun Deng <yajun.deng@linux.dev> Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Whenever x86_decode_emulated_instruction() detects a breakpoint, it returns the value that kvm_vcpu_check_breakpoint() writes into its pass-by-reference second argument. Unfortunately this is completely bogus because the expected outcome of x86_decode_emulated_instruction is an EMULATION_* value. Then, if kvm_vcpu_check_breakpoint() does "*r = 0" (corresponding to a KVM_EXIT_DEBUG userspace exit), it is misunderstood as EMULATION_OK and x86_emulate_instruction() is called without having decoded the instruction. This causes various havoc from running with a stale emulation context. The fix is to move the call to kvm_vcpu_check_breakpoint() where it was before commit 4aa2691d ("KVM: x86: Factor out x86 instruction emulation with decoding") introduced x86_decode_emulated_instruction(). The other caller of the function does not need breakpoint checks, because it is invoked as part of a vmexit and the processor has already checked those before executing the instruction that #GP'd. This fixes CVE-2022-1852. Reported-by:
Qiuhao Li <qiuhao@sysec.org> Reported-by:
Gaoning Pan <pgn@zju.edu.cn> Reported-by:
Yongkang Jia <kangel@zju.edu.cn> Fixes: 4aa2691d ("KVM: x86: Factor out x86 instruction emulation with decoding") Cc: stable@vger.kernel.org Signed-off-by:
-
Ashish Kalra authored
For some sev ioctl interfaces, the length parameter that is passed maybe less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the allocated buffer, these sev ioctl interface may return uninitialized kernel slab memory. Reported-by:
Andy Nguyen <theflow@google.com> Suggested-by:
David Rientjes <rientjes@google.com> Suggested-by:
Peter Gonda <pgonda@google.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Fixes: eaf78265 ("KVM: SVM: Move SEV code to separate file") Fixes: 2c07ded0 ("KVM: SVM: add support for SEV attestation command") Fixes: 4cfdd47d ("KVM: SVM: Add KVM_SEV SEND_START command") Fixes: d3d1af85 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command") Fixes: eba04b20 ("KVM: x86: Account a variety of miscellaneous allocations") Signed-off-by:
Ashish Kalra <ashish.kalra@amd.com> Reviewed-by:
-
Sean Christopherson authored
Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Fixes: be50b206 ("kvm: x86: Add support for getting/setting expanded xstate buffer") Fixes: c60427dd ("x86/fpu: Add uabi_size to guest_fpu") Reported-by:Zdenek Kaspar <zkaspar82@gmail.com> Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
Signed-off-by: -
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix and feature for 5.19 - ultravisor communication device driver - fix TEID on terminating storage key ops
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv changes for 5.19 - Added Sv57x4 support for G-stage page table - Added range based local HFENCE functions - Added remote HFENCE functions based on VCPU requests - Added ISA extension registers in ONE_REG interface - Updated KVM RISC-V maintainers entry to cover selftests support
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for 5.19 - Add support for the ARMv8.6 WFxT extension - Guard pages for the EL2 stacks - Trap and emulate AArch32 ID registers to hide unsupported features - Ability to select and save/restore the set of hypercalls exposed to the guest - Support for PSCI-initiated suspend in collaboration with userspace - GICv3 register-based LPI invalidation support - Move host PMU event merging into the vcpu data structure - GICv3 ITS save/restore fixes - The usual set of small-scale cleanups and fixes [Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated from 4 to 6. - Paolo]
-
Yang Weijiang authored
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f, so the last format test will fail. Use a true invalid format(0x30) for the test if it's running on these platforms. Opportunistically change the file name to reflect the tests actually carried out. Suggested-by:
Yang Weijiang <weijiang.yang@intel.com> Message-Id: <20220512084046.105479-1-weijiang.yang@intel.com> Signed-off-by:
-
Wanpeng Li authored
In commit ec0671d5 ("KVM: LAPIC: Delay trace_kvm_wait_lapic_expire tracepoint to after vmexit", 2019-06-04), trace_kvm_wait_lapic_expire was moved after guest_exit_irqoff() because invoking tracepoints within kvm_guest_enter/kvm_guest_exit caused a lockdep splat. These days this is not necessary, because commit 87fa7f3e ("x86/kvm: Move context tracking where it belongs", 2020-07-09) restricted the RCU extended quiescent state to be closer to vmentry/vmexit. Moving the tracepoint back to __kvm_wait_lapic_expire is more accurate, because it will be reported even if vcpu_enter_guest causes multiple vmentries via the IPI/Timer fast paths, and it allows the removal of advance_expire_delta. Signed-off-by:
-
- 20 May, 2022 15 commits
-
-
Janis Schoetterl-Glausch authored
Check that suppression is not indicated on injection of a key checked protection exception caused by a memop after it already modified guest memory, as that violates the definition of suppression. Signed-off-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@linux.ibm.com> Link: https://lore.kernel.org/r/20220512131019.2594948-3-scgl@linux.ibm.comSigned-off-by:
Janosch Frank <frankja@linux.ibm.com>
-
Janis Schoetterl-Glausch authored
If user space uses a memop to emulate an instruction and that memop fails, the execution of the instruction ends. Instruction execution can end in different ways, one of which is suppression, which requires that the instruction execute like a no-op. A writing memop that spans multiple pages and fails due to key protection may have modified guest memory, as a result, the likely correct ending is termination. Therefore, do not indicate a suppressing instruction ending in this case. Signed-off-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220512131019.2594948-2-scgl@linux.ibm.comSigned-off-by:
-
Steffen Eiden authored
Adds some selftests to test ioctl error paths of the uv-uapi. The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility must be available. The test can be executed by non-root, however, the uvdevice special file /dev/uv must be accessible for reading and writing which may imply root privileges. ./test-uv-device TAP version 13 1..6 # Starting 6 tests from 3 test cases. # RUN uvio_fixture.att.fault_ioctl_arg ... # OK uvio_fixture.att.fault_ioctl_arg ok 1 uvio_fixture.att.fault_ioctl_arg # RUN uvio_fixture.att.fault_uvio_arg ... # OK uvio_fixture.att.fault_uvio_arg ok 2 uvio_fixture.att.fault_uvio_arg # RUN uvio_fixture.att.inval_ioctl_cb ... # OK uvio_fixture.att.inval_ioctl_cb ok 3 uvio_fixture.att.inval_ioctl_cb # RUN uvio_fixture.att.inval_ioctl_cmd ... # OK uvio_fixture.att.inval_ioctl_cmd ok 4 uvio_fixture.att.inval_ioctl_cmd # RUN attest_fixture.att_inval_request ... # OK attest_fixture.att_inval_request ok 5 attest_fixture.att_inval_request # RUN attest_fixture.att_inval_addr ... # OK attest_fixture.att_inval_addr ok 6 attest_fixture.att_inval_addr # PASSED: 6 / 6 tests passed. # Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by:
Steffen Eiden <seiden@linux.ibm.com> Acked-by:
-
Steffen Eiden authored
This patch adds a new miscdevice to expose some Ultravisor functions to userspace. Userspace can send IOCTLs to the uvdevice that will then emit a corresponding Ultravisor Call and hands the result over to userspace. The uvdevice is available if the Ultravisor Call facility is present. Userspace can call the Retrieve Attestation Measurement Ultravisor Call using IOCTLs on the uvdevice. The uvdevice will do some sanity checks first. Then, copy the request data to kernel space, build the UVCB, perform the UV call, and copy the result back to userspace. Signed-off-by:
-
Anup Patel authored
We update KVM RISC-V maintainers entry to include appropriate KVM selftests directories so that RISC-V related KVM selftests patches are CC'ed to KVM RISC-V mailing list. Signed-off-by:Anup Patel <anup@brainfault.org>
-
Atish Patra authored
Currently, there is no provision for vmm (qemu-kvm or kvmtool) to query about multiple-letter ISA extensions. The config register is only used for base single letter ISA extensions. A new ISA extension register is added that will allow the vmm to query about any ISA extension one at a time. It is enabled for both single letter or multi-letter ISA extensions. The ISA extension register is useful to if the vmm requires to retrieve/set single extension while the config register should be used if all the base ISA extension required to retrieve or set. For any multi-letter ISA extensions, the new register interface must be used. Signed-off-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
-
Anup Patel authored
On RISC-V platforms with hardware VMID support, we share same VMID for all VCPUs of a particular Guest/VM. This means we might have stale G-stage TLB entries on the current Host CPU due to some other VCPU of the same Guest which ran previously on the current Host CPU. To cleanup stale TLB entries, we simply flush all G-stage TLB entries by VMID whenever underlying Host CPU changes for a VCPU. Signed-off-by:
Anup Patel <apatel@ventanamicro.com> Reviewed-by:
-
Anup Patel authored
The generic KVM has support for VCPU requests which can be used to do arch-specific work in the run-loop. We introduce remote HFENCE functions which will internally use VCPU requests instead of host SBI calls. Advantages of doing remote HFENCEs as VCPU requests are: 1) Multiple VCPUs of a Guest may be running on different Host CPUs so it is not always possible to determine the Host CPU mask for doing Host SBI call. For example, when VCPU X wants to do HFENCE on VCPU Y, it is possible that VCPU Y is blocked or in user-space (i.e. vcpu->cpu < 0). 2) To support nested virtualization, we will be having a separate shadow G-stage for each VCPU and a common host G-stage for the entire Guest/VM. The VCPU requests based remote HFENCEs helps us easily synchronize the common host G-stage and shadow G-stage of each VCPU without any additional IPI calls. This is also a preparatory patch for upcoming nested virtualization support where we will be having a shadow G-stage page table for each Guest VCPU. Signed-off-by:
-
Anup Patel authored
Currently, the KVM_MAX_VCPUS value is 16384 for RV64 and 128 for RV32. The KVM_MAX_VCPUS value is too high for RV64 and too low for RV32 compared to other architectures (e.g. x86 sets it to 1024 and ARM64 sets it to 512). The too high value of KVM_MAX_VCPUS on RV64 also leads to VCPU mask on stack consuming 2KB. We set KVM_MAX_VCPUS to 1024 for both RV64 and RV32 to be aligned other architectures. Signed-off-by:
-
Anup Patel authored
Various __kvm_riscv_hfence_xyz() functions implemented in the kvm/tlb.S are equivalent to corresponding HFENCE.GVMA instructions and we don't have range based local HFENCE functions. This patch provides complete set of local HFENCE functions which supports range based TLB invalidation and supports HFENCE.VVMA based functions. This is also a preparatory patch for upcoming Svinval support in KVM RISC-V. Signed-off-by:
-
Anup Patel authored
We should treat SBI HFENCE calls as NOPs until nested virtualization is supported by KVM RISC-V. This will help us test booting a hypervisor under KVM RISC-V. Signed-off-by:
-
Anup Patel authored
Latest QEMU supports G-stage Sv57x4 mode so this patch extends KVM RISC-V G-stage handling to detect and use Sv57x4 mode when available. Signed-off-by:
-
Anup Patel authored
The two-stage address translation defined by the RISC-V privileged specification defines: VS-stage (guest virtual address to guest physical address) programmed by the Guest OS and G-stage (guest physical addree to host physical address) programmed by the hypervisor. To align with above terminology, we replace "stage2" with "gstage" and "Stage2" with "G-stage" name everywhere in KVM RISC-V sources. Signed-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./tools/testing/selftests/kvm/lib/riscv/processor.c:353:3-4: Unneeded semicolon. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Anup Patel authored
Currently, we simply hang using "while (1) ;" upon any unexpected guest traps because the default guest trap handler is guest_hang(). The above approach is not useful to anyone because KVM selftests users will only see a hung application upon any unexpected guest trap. This patch improves unexpected guest trap handling for KVM RISC-V selftests by doing the following: 1) Return to host user-space 2) Dump VCPU registers 3) Die using TEST_ASSERT(0, ...) Signed-off-by:
Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by:
-
- 16 May, 2022 9 commits
-
-
Marc Zyngier authored
* kvm-arm64/its-save-restore-fixes-5.19: : . : Tighten the ITS save/restore infrastructure to fail early rather : than late. Patches courtesy of Rocardo Koller. : . KVM: arm64: vgic: Undo work in failed ITS restores KVM: arm64: vgic: Do not ignore vgic_its_restore_cte failures KVM: arm64: vgic: Add more checks when restoring ITS tables KVM: arm64: vgic: Check that new ITEs could be saved in guest memory Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
* kvm-arm64/misc-5.19: : . : Misc fixes and general improvements for KVMM/arm64: : : - Better handle out of sequence sysregs in the global tables : : - Remove a couple of unnecessary loads from constant pool : : - Drop unnecessary pKVM checks : : - Add all known M1 implementations to the SEIS workaround : : - Cleanup kerneldoc warnings : . KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVE KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handler KVM: arm64: nvhe: Eliminate kernel-doc warnings KVM: arm64: Avoid unnecessary absolute addressing via literals KVM: arm64: Print emulated register table name when it is unsorted KVM: arm64: Don't BUG_ON() if emulated register table is unsorted Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/per-vcpu-host-pmu-data: : . : Pass the host PMU state in the vcpu to avoid the use of additional : shared memory between EL1 and EL2 (this obviously only applies : to nVHE and Protected setups). : : Patches courtesy of Fuad Tabba. : . KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected KVM: arm64: Reenable pmu in Protected Mode KVM: arm64: Pass pmu events to hyp via vcpu KVM: arm64: Repack struct kvm_pmu to reduce size KVM: arm64: Wrapper for getting pmu_events Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/vgic-invlpir: : . : Implement MMIO-based LPI invalidation for vGICv3. : . KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation KVM: arm64: vgic-v3: Expose GICR_CTLR.RWP when disabling LPIs irqchip/gic-v3: Exposes bit values for GICR_CTLR.{IR, CES} Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/psci-suspend: : . : Add support for PSCI SYSTEM_SUSPEND and allow userspace to : filter the wake-up events. : : Patches courtesy of Oliver. : . Documentation: KVM: Fix title level for PSCI_SUSPEND selftests: KVM: Test SYSTEM_SUSPEND PSCI call selftests: KVM: Refactor psci_test to make it amenable to new tests selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test KVM: arm64: Implement PSCI SYSTEM_SUSPEND KVM: arm64: Add support for userspace to suspend a vCPU KVM: arm64: Return a value from check_vcpu_requests() KVM: arm64: Rename the KVM_REQ_SLEEP handler KVM: arm64: Track vCPU power state using MP state values KVM: arm64: Dedupe vCPU power off helpers KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2 Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/hcall-selection: : . : Introduce a new set of virtual sysregs for userspace to : select the hypercalls it wants to see exposed to the guest. : : Patches courtesy of Raghavendra and Oliver. : . KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace Documentation: Fix index.rst after psci.rst renaming selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list selftests: KVM: aarch64: Introduce hypercall ABI test selftests: KVM: Create helper for making SMCCC calls selftests: KVM: Rename psci_cpu_on_test to psci_test tools: Import ARM SMCCC definitions Docs: KVM: Add doc for the bitmap firmware registers Docs: KVM: Rename psci.rst to hypercalls.rst KVM: arm64: Add vendor hypervisor firmware register KVM: arm64: Add standard hypervisor firmware register KVM: arm64: Setup a framework for hypercall bitmap firmware registers KVM: arm64: Factor out firmware register handling from psci.c Signed-off-by: -
Marc Zyngier authored
We generally want to disallow hypercall bitmaps being changed once vcpus have already run. But we must allow the write if the written value is unchanged so that userspace can rewrite the register file on reboot, for example. Without this, a QEMU-based VM will fail to reboot correctly. The original code was correct, and it is me that introduced the regression. Fixes: 05714cab ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers") Signed-off-by:
-
Ricardo Koller authored
Failed ITS restores should clean up all state restored until the failure. There is some cleanup already present when failing to restore some tables, but it's not complete. Add the missing cleanup. Note that this changes the behavior in case of a failed restore of the device tables. restore ioctl: 1. restore collection tables 2. restore device tables With this commit, failures in 2. clean up everything created so far, including state created by 1. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Ricardo Koller <ricarkol@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Signed-off-by:
-
Ricardo Koller authored
Restoring a corrupted collection entry (like an out of range ID) is being ignored and treated as success. More specifically, a vgic_its_restore_cte failure is treated as success by vgic_its_restore_collection_table. vgic_its_restore_cte uses positive and negative numbers to return error, and +1 to return success. The caller then uses "ret > 0" to check for success. Fix this by having vgic_its_restore_cte only return negative numbers on error. Do this by changing alloc_collection return codes to only return negative numbers on error. Signed-off-by:
-
