Use the new ->ndo_tunnel_ctl instead of overriding the address limit
and using ->ndo_do_ioctl just to do a pointless user copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Factor out a addrconf_set_sit_dstaddr helper for the actual work if we
found a SIT device, and only hold the rtnl lock around the device lookup
and that new helper, as there is no point in holding it over a
copy_from_user call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no point in copying the structure from userspace or looking up
a device if SIT support is not disabled and we'll eventually return
-ENODEV anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to
handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL,
SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split the ioctl handler into one function per command instead of having
a all the logic sit in one giant switch statement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the new ->ndo_tunnel_ctl instead of overriding the address limit
and using ->ndo_do_ioctl just to do a pointless user copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This method is used to properly allow kernel callers of the IPv4 route
management ioctls.  The exsting ip_tunnel_ioctl helper is renamed to
ip_tunnel_ctl to better reflect that it doesn't directly implement ioctls
touching user memory, and is used for the guts of ndo_tunnel_ctl
implementations. A new ip_tunnel_ioctl helper is added that can be wired
up directly to the ndo_do_ioctl method and takes care of the copy to and
from userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also move the dev_set_allmulti call and the error handling into the
ioctl helper.  This allows reusing already looked up tunnel_dev pointer
and the set up argument structure for the deletion in the error handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reduce a few level of indentation to simplify the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vaibhav Gupta says:

====================
realtek ethernet : use generic power management.

The purpose of this patch series is to remove legacy power management callbacks
from realtek ethernet drivers.

The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the powermanagement
themselves, which is not recommended.

The conversion requires the removal of the those function calls and change the
callback definition accordingly.

All Changes are compile-tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

compile-tested only

With legacy PM hooks, it was the responsibility
of a driver to manage PCI states and also
device's power state. The generic approach is
to let PCI core handle the work.

The suspend callback enables/disables PCI wake
on the basis of "cp->wol_enabled" variable
which is unknown to PCI core. To utilise its
need, call device_set_wakeup_enable().
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

compile-tested only

With legacy PM hooks, it was the responsibility
of a driver to manage PCI states and also
device's power state. The generic approach is
to let PCI core handle the work.

PCI core passes "struct device*" as an argument
to the .suspend() and .resume() callbacks. As
these callabcks work with "struct net_device*",
extract it from "struct device*" using
dev_get_drv_data().
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
nfp: flower: feature bit updates

this short series has two parts.

* The first patch cleans up the treatment of existing feature bits.
  There are two distinct methods used and the code now reflects this
  more clearly.
* The second patch informs firmware of flower features. This allows
  the firmware to disable certain features in the absence of of host support.

Changes since v1
- Add now-first patch to clean up existing implementation
- Address Jakub's feedback
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For backwards compatibility it may be required for the firmware to
disable certain features depending on the features supported by
the host. Combine the host feature bits and firmware feature bits
and write this back to the firmware.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean up name aliasing. Some features gets enabled using a slightly
different method, but the bitmap for these were stored in the same
field. Rename their #defines and move the bitmap to a new variable.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
net/iucv: updates 2020-05-19

please apply the following patch series for iucv to netdev's net-next
tree.

s390 dropped its support for power management, this removes the relevant
iucv code. Also, some easy cleanups I found mouldering in an old branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove a bunch of forward declarations (trivially shifting code around
where needed), and make a few functions static.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

txmsg is declared as {0}, no need to clear individual fields later on.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve the readability of a range check.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 39421627 ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE from s390.

So drop the unused pm ops from the s390-only af_iucv socket code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 39421627 ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE from s390.

So drop the unused pm ops from the s390-only iucv bus driver.

CC: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/net: updates 2020-05-19

please apply the following patch series to netdev's net-next tree.

s390 dropped its support for power management, this removes the relevant
code from the s390 network drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 39421627 ("s390: remove broken hibernate / power management support")
removed support for ARCH_HIBERNATION_POSSIBLE on s390.
So drop the unused pm ops from the iucv drivers.

CC: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 5e1fb45e ("s390/ccwgroup: remove pm support") removed power
management support from the ccwgroup bus driver. So remove the
associated callbacks from all ccwgroup drivers.

CC: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2020-05-18

This series contains updates to igc driver only.

Sasha adds ECN support for TSO by adding the NETIF_F_TSO_ECN flag, which
aligns with other Intel drivers.  Also cleaned up defines that are not
supported or used in the igc driver.

Andre does most of the changes with updating the log messages for igc
driver.

Vitaly adds support for EEPROM, register and link ethtool
self-tests.

v2: Fixed up the added ethtool self-tests based on feedback from the
    community.  Dropped the four patches that removed '\n' from log
    messages.
v3: Reverted the debug message changes in patch 2 for messages in
    igc_probe, also made reg_test[] static in patch 3 based on community
    feedback
v4: Updated the patch description for patch 2, which referred to changes
    that no longer existed in the patch
v5: Scrubbed patches 4-7 patch description, which also referred to
    changes that no longer existed in the patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In [0] a user reported reproducible tx timeouts on RTL8168f except
PktCntrDisable is set and irq coalescing is enabled.
Realtek told me that they are not aware of any related hw issue on
this chip version, therefore root cause is still unknown. It's not
clear whether the issue affects one or more chip versions in general,
or whether issue is specific to reporter's system.
Due to this level of uncertainty, and due to the fact that I'm aware
of this one report only, let's apply the workaround on net-next only.
After this change setting irq coalescing via ethtool can reliably
avoid the issue on the affected system.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=207205Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the compiler decide about inlining, and as confirmed by Eric it's
better to use WRITE_ONCE here to ensure that the descriptor ownership
is transferred to NIC immediately.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid the goto from the rx error handling branch into the else branch,
and in general avoid having the main rx work in the else branch.
In addition ensure proper reverse xmas tree order of variables in the
for loop.

No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christoph Hellwig says:

====================
move the SIOCDELRT and SIOCADDRT compat_ioctl handlers v3

this series moves the compat_ioctl handlers into the protocol handlers,
avoiding the need to override the address space limited as in the current
handler.

Changes since v3:
 - moar variable reordering

Changes since v1:
 - reorder a bunch of variable declarations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

To prepare removing the global routing_ioctl hack start lifting the code
into the ipv4 and appletalk ->compat_ioctl handlers.  Unlike the existing
handler we don't bother copying in the name - there are no compat issues for
char arrays.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper than can be shared with the upcoming compat ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

To prepare removing the global routing_ioctl hack start lifting the code
into a newly added ipv6 ->compat_ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for better compat ioctl handling by moving the user copy out
of ipv6_route_ioctl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow control status register not applicable for i225 parts
so clean up the unneeded define.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

PHY_FORCE_LIMIT definition not in use and could be removed
i225 parts support auto negotiation mechanism
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch coverts one pr_debug() call to hw_dbg() in order to keep log
output aligned with the rest of the driver. hw_dbg() is actually a macro
defined in igc_hw.h that expands to netdev_dbg().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In igc_dump.c we print log messages using dev_* and pr_* helpers,
generating inconsistent output with the rest of the driver. Since this
is a network device driver, we should preferably use netdev_* helpers
because they append the interface name to the message, helping making
sense out of the logs.

This patch converts all dev_* and pr_* calls to netdev_*.

Quick note about igc_rings_dump(): This function is always called with
valid adapter->netdev so there is not need to check it.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In igc_ptp.c we print log messages using dev_* helpers, generating
inconsistent output with the rest of the driver. Since this is a network
device driver, we should preferably use netdev_* helpers because they
append the interface name to the message, helping making sense out of
the logs.

This patch converts all dev_* calls to netdev_*.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>