- 04 Feb, 2011 3 commits
-
-
Stephen Boyd authored
The inline assembly differences for v6 vs. v7 in the hvc_dcc driver are purely optimizations. On a v7 processor, an mrc with the pc sets the condition codes to the 28-31 bits of the register being read. It just so happens that the TX/RX full bits the DCC driver is testing for are high enough in the register to be put into the condition codes. On a v6 processor, this "feature" isn't implemented and thus we have to do the usual read, mask, test operations to check for TX/RX full. Since we already test the RX/TX full bits before calling __dcc_getchar() and __dcc_putchar() we don't actually need to do anything special for v7 over v6. The only difference is in hvc_dcc_get_chars(). We would test RX full, poll RX full, and then read a character from the buffer, whereas now we will test RX full, read a character from the buffer, and then test RX full again for the second iteration of the loop. It doesn't seem possible for the buffer to go from full to empty between testing the RX full and reading a character. Therefore, replace the v7 versions with the v6 versions and everything works the same. Acked-by:
Tony Lindgren <tony@atomide.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stephen Boyd authored
Casting and anding with 0xff is unnecessary in hvc_dcc_put_chars() since buf is already a char[]. __dcc_get_char() can't return an int less than 0 since it only returns a char. Simplify the if statement in hvc_dcc_get_chars() to take this into account. Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stephen Boyd authored
Without marking the asm __dcc_getstatus() volatile my compiler decides it can cache the value of __ret in a register and then check the value of it continually in hvc_dcc_put_chars() (I had to replace get_wait/put_wait with 1 and fixup the branch otherwise my disassembler barfed on __dcc_(get|put)char). 00000000 <hvc_dcc_put_chars>: 0: ee103e11 mrc 14, 0, r3, cr0, cr1, {0} 4: e3a0c000 mov ip, #0 ; 0x0 8: e2033202 and r3, r3, #536870912 ; 0x20000000 c: ea000006 b 2c <hvc_dcc_put_chars+0x2c> 10: e3530000 cmp r3, #0 ; 0x0 14: 1afffffd bne 10 <hvc_dcc_put_chars+0x10> 18: e7d1000c ldrb r0, [r1, ip] 1c: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 20: 2afffffd bcs 1c <hvc_dcc_put_chars+0x1c> 24: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 28: e28cc001 add ip, ip, #1 ; 0x1 2c: e15c0002 cmp ip, r2 30: bafffff6 blt 10 <hvc_dcc_put_chars+0x10> 34: e1a00002 mov r0, r2 38: e12fff1e bx lr As you can see, the value of the mrc is checked against DCC_STATUS_TX (bit 29) and then stored in r3 for later use. Marking the asm volatile produces the following: 00000000 <hvc_dcc_put_chars>: 0: e3a03000 mov r3, #0 ; 0x0 4: ea000007 b 28 <hvc_dcc_put_chars+0x28> 8: ee100e11 mrc 14, 0, r0, cr0, cr1, {0} c: e3100202 tst r0, #536870912 ; 0x20000000 10: 1afffffc bne 8 <hvc_dcc_put_chars+0x8> 14: e7d10003 ldrb r0, [r1, r3] 18: ee10fe11 mrc 14, 0, pc, cr0, cr1, {0} 1c: 2afffffd bcs 18 <hvc_dcc_put_chars+0x18> 20: ee000e15 mcr 14, 0, r0, cr0, cr5, {0} 24: e2833001 add r3, r3, #1 ; 0x1 28: e1530002 cmp r3, r2 2c: bafffff5 blt 8 <hvc_dcc_put_chars+0x8> 30: e1a00002 mov r0, r2 34: e12fff1e bx lr which looks better and actually works. Mark all the inline assembly in this file as volatile since we don't want the compiler to optimize away these statements or move them around in any way. Acked-by:
Tony Lindgren <tony@atomide.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Daniel Walker <dwalker@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- 03 Feb, 2011 11 commits
-
-
Tomoya MORINAGA authored
PCH_DMA is not always enabled when a user uses PCH_UART. Since overhead of DMA is not small, in case of low frequent communication, without DMA is better. Thus, "select PCH_DMA" and DMADEVICES are unnecessary Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tomoya MORINAGA authored
Support ML7213 device of OKI SEMICONDUCTOR. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
m68k_serial->tqueue_hangup is unused. Remove it. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Yin Kangkai authored
On some platforms, we need to restore the console speed on resume even it was not suspended (no_console_suspend), and on others we don't have to do that. So don't care about the "console_suspend_enabled" and unconditionally reset the console speed if it is a console. This is actually a redo of ba15ab0e (Set proper console speed on resume if console suspend is disabled) from Deepak Saxena. I also tried to investigate more to find out if this change will break others, here is what I've found out: commit 891b9dd1 Author: Jason Wang <jason77.wang@gmail.com> serial-core: restore termios settings when resume console ports commit ca2e71aa Author: Jason Wang <jason77.wang@gmail.com> serial-core: skip call set_termios/console_start when no_console_suspend commit 4547be78 Author: Stanislav Brabec <sbrabec@suse.cz> serial-core: resume serial hardware with no_console_suspend commit ba15ab0e Author: Deepak Saxena <dsaxena@laptop.org> Set proper console speed on resume if console suspend is disabled from ba15ab0e, we learned that, even if the console suspend is disabled (when no_console_suspend is set), we may still need to "reset the port to the state it was in before we suspended." Then with 4547be78, this piece of code is removed. And then Jason Wang added that back in ca2e71aa and 891b9dd1, to fix some breakage on OMAP3EVM platform. From ca2e71aa we learned that the "set_termios" things is actually needed by both console is suspended and not suspended. That's why I removed the console_suspended_enabled condition, and only call console_start() when we actually suspeneded it. I also noticed in this thread: http://marc.info/?t=129079257100004&r=1&w=2, which talked about on some platforms, UART HW will be cut power whether or not we set no_console_suspend, and then on resume it does not work quite well. I have a similar HW, and this patch fixed this issue, don't know if this patch also works on their platforms. [Update: Stanislav tested this patch on Zaurus and reported it improves the situation. Thanks.] CC: Greg KH <greg@kroah.com> CC: Deepak Saxena <dsaxena@laptop.org> CC: Jason Wang <jason77.wang@gmail.com> CC: Stanislav Brabec <sbrabec@suse.cz> CC: Daniel Drake <dsd@laptop.org> Signed-off-by:
Yin Kangkai <kangkai.yin@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
This is used to store the spi_device ->modalias so they have to be the same size. SPI_NAME_SIZE is 32. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
flush_scheduled_work() is scheduled to be deprecated. Explicitly sync flush the used work items instead. Note that before this change, flush_scheduled_work() wouldn't have properly flushed tty->buf.work if it were on timer. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jarkko Nikula authored
OMAP can do also dynamic idling so wake-up enable register should be set also while system is running. If UART_OMAP_WER is not set, then for instance the RX activity cannot wake up the UART port that is sleeping. This RX wake-up feature was working when the 8250 driver was used instead of omap-serial. Reason for this is that the 8250 doesn't set the UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and restoring the reset default which is the same than value OMAP_UART_WER_MOD_WKUP here. Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm into serial_omap_startup where wake-up bits are set unconditionally. Signed-off-by:
Jarkko Nikula <jhnikula@gmail.com> Cc: Govindraj.R <govindraj.raja@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Thomas Weber authored
Magic SysRq key is not working for OMAP on new serial console ttyOx because SUPPORT_SYSRQ is not defined for omap-serial. This patch defines SUPPORT_SYSRQ in omap-serial and enables handling of Magic SysRq character. Further there is an issue of losing first break character. Removing the reset of the lsr_break_flag fixes this issue. Signed-off-by:
Thomas Weber <weber@corscience.de> Acked-by:
Govindraj.R <govindraj.raja@ti.com> Tested-by:
Manjunath G Kondaiah <manjugk@ti.com> Acked-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Russ Gorby authored
Some platform attributes (e.g. max_hz, use_dma) were being intuited from the modem type. These things should be specified by the platform data. Added max_hz, use_dma to ifx_modem_platform_data definition, replaced is_6160 w/ modem_type, and changed clients accordingly Signed-off-by:
Russ Gorby <russ.gorby@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Feng Tang authored
This is kind of a revert for commit 669b7a09 "hsu: add a periodic timer to check dma rx channel", which is a workaround for a bug in A0 stepping silicon, where a dma rx data timeout is missing for some case. Since new silicon has fixed it and the old version is phasing out, no need to carry on it any more. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vasiliy Kulikov authored
sport->port.irq is unsigned, check for <0 doesn't make sense. Explicitly cast it to int to check for error. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- 01 Feb, 2011 1 commit
-
-
Linus Torvalds authored
-
- 31 Jan, 2011 25 commits
-
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSv4 readdir loses entries NFS: Micro-optimize nfs4_decode_dirent() NFS: Fix an NFS client lockdep issue NFS construct consistent co_ownerid for v4.1 NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount NFS improve pnfs_put_deviceid_cache debug print NFS fix cb_sequence error processing NFS do not find client in NFSv4 pg_authenticate NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" NFS: Prevent memory allocation failure in nfsacl_encode() NFS: nfsacl_{encode,decode} should return signed integer NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" NFS: Fix "kernel BUG at fs/aio.c:554!" NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). NFS: fix handling of malloc failure during nfs_flush_multi()
-
Linus Torvalds authored
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: smp_on_up: allow non-ARM SMP processors ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ ARM: initrd: disable initrd if passed address overlaps reserved region ARM: footbridge: fix debug macros ARM: mmci: round down the bytes transferred on error ARM: mmci: complete the transaction on error ARM: 6642/1: mmci: calculate remaining bytes at error correctly
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR arm: omap2: mux: fix compile warning omap1: Simplify use of omap_irq_flags omap2+: Fix unused variable warning for omap_irq_base
-
Randy Dunlap authored
Fix kernel-doc warning in kernel.h from commit 7ef88ad5 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown.
-
Michael S. Tsirkin authored
Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c
-
Russell King authored
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
0ea12930 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'for-linus' of git://git.infradead.org/ubi-2.6: Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
-
Dmitry Torokhov authored
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by:
Mark Lord <kernel@teksavvy.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - retry failed resets when reconnecting Input: synaptics - fix reconnect logic on MT devices Input: tegra-kbc - fix keymap entry for LeftMeta key Input: tegra-kbc - fix build error
-
Kacper Kornet authored
Since check_prlimit_permission always fails in the case of SUID/GUID processes, such processes are not able to read or set their own limits. This commit changes this by assuming that process can always read/change its own limits. Signed-off-by:
Kacper Kornet <kornet@camk.edu.pl> Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Altaparmakov authored
In ntfs_mft_record_alloc() when mapping the new extent mft record with map_extent_mft_record() we overwrite @M with the return value and on error, we then try to use the old @M but that is no longer there as @M now contains an error code instead so we crash when dereferencing the error code as if it were a pointer. The simple fix is to use a temporary variable to store the return value thus preserving the original @M for later use. This is a backport from the commercial Tuxera-NTFS driver and is well tested... Thanks go to Julia Lawall for pointing this out (whilst I had fixed it in the commercial driver I had failed to fix it in the Linux kernel). Signed-off-by:
Anton Altaparmakov <anton@tuxera.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: More crypto cleanup (try #2) CIFS: Add strictcache mount option CIFS: Implement cifs_strict_writev (try #4) [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm: kmemleak: Allow kmemleak metadata allocations to fail kmemleak: remove memset by using kzalloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6Linus Torvalds authored
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length drivers/staging/vme/bridges/Module.symvers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Fix automute on Thinkpad L412/L512 ALSA: HDA: Fix dmesg output of HDMI supported bits ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture ASoC: correct link specifications for corgi, poodle and spitz ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s ASoC: Fix codec device id format used by some dai_links ALSA: azt3328 - fix broken AZF_FMT_XLATE macro ALSA: Xonar, CS43xx: Don't overrun static array ASoC: Handle low measured DC offsets for wm_hubs devices ASoC: da8xx/omap-l1xx: match codec_name with i2c ids ASoC: WM8994: fix wrong value in tristate function ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()
-