- 16 Mar, 2015 4 commits
-
-
Nicolas Ferre authored
First batch of cleanup for 4.1: - little phy fixup that is not needed anymore - hudge cleanup of the PM code: - removal of "use slow clock" option => always use this for suspend to RAM - quicker suspend as the asm function is copied only once to SRAM - use of the same asm function for "standby" and "mem" types of suspend actions - adaptation to the ARMv7 processors -
Nicolas Ferre authored
Third fixes batch for AT91 on 4.0: - clock fixes for USB - compatible string changes for handling USB IP differences (+ needed AHB matrix syscon) - fix of a compilation error in PM code
-
Nicolas Ferre authored
Second fixes batch for AT91 on 4.0: - little fix for !MMU debug: may also help for randconfig - fix of 2 errors in LCD clock definitions - in PM code, not writing the key leads to not execute the action
-
Nicolas Ferre authored
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
-
- 13 Mar, 2015 12 commits
-
-
Wenyou Yang authored
Flush data cache, and clean, invalidate and disable the L2 cache before going to suspend. Restore the L2 cache configuration and re-enable the L2 cache after waking up. Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by:
Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Wenyou Yang authored
Add the WFI instruction to make the cpu to the idle state. In the meanwhile, disable the processor's clock. Signed-off-by:
-
Wenyou Yang authored
Because the standby mode use the same sram function as the suspend to memory mode, void (*at91_pm_standby)(void) doesn't need, remove it. Signed-off-by:
-
Wenyou Yang authored
As the file name is renamed, rename the function name at91_slow_clock() --> at91_pm_suspend_sram_fn(), rename the function handler's name at the same time. Signed-off-by:
-
Wenyou Yang authored
Because the sram function is used for both suspend to memory and the suspend to standby mode, renaming is more elegant. Signed-off-by:
-
Wenyou Yang authored
To simply the PM code, the suspend to standby mode uses same sram function as the suspend to memory mode, running in the internal SRAM, instead of the respective code for each mode. For the suspend to standby mode, the master clock doesn't switch to the slow clock, and PLLA and the main oscillator doesn't turn off as well. Signed-off-by:
-
Wenyou Yang authored
To decrease the suspend time, move copying the sram function to the sram initialization phase, instead of every time go to suspend. In the meanwhile, substitute fncpy() for memcpy(). If there is no sram allocated for PM, the PM is not supported. Signed-off-by:
-
Wenyou Yang authored
To decrease the duplicated code, create the procedure to contain both activing and exiting the sdram self-refresh mode. Signed-off-by:
-
Sylvain Rochet authored
Assume USB PLL and PLL B are already stopped before entering sleep mode. Removed PLL B from slow clock code, all drivers are supposed to properly unprepare clocks. Signed-off-by:
-
Wenyou Yang authored
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config is unnecessary for the suspend to memory mode. For this mode the master clock should always switch to the slow clock. Signed-off-by:
-
Wenyou Yang authored
To simply the PM config the CONFIG_AT91_SLOW_CLOCK option will be removed, so move "select SRAM" from under AT91_SLOW_CLOCK, add "select SRAM if PM" under SOC_AT91SAM9 and SOC_SAMA5 Signed-off-by:
-
Wenyou Yang authored
The SLOWDOWN_MASTER_CLOCK definition is not used, remove the redundant code. Signed-off-by:
-
- 12 Mar, 2015 5 commits
-
-
Wenyou Yang authored
Since at91_pm_set_standby() will not be used out of the pm.c file, change its attribute from extern to static, remove its declaration as well. Signed-off-by:
-
Boris Brezillon authored
Commit 2b0ba96c ("net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation process, thus making this phy fixup useless. Remove it along with the associated headers inclusion. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
-
Nicolas Ferre authored
Third fixes batch for AT91 on 4.0: - clock fixes for USB - compatible string changes for handling USB IP differences (+ needed AHB matrix syscon) - fix of a compilation error in PM code
-
Nicolas Ferre authored
Second fixes batch for AT91 on 4.0: - little fix for !MMU debug: may also help for randconfig - fix of 2 errors in LCD clock definitions - in PM code, not writing the key leads to not execute the action
-
Nicolas Ferre authored
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
-
- 11 Mar, 2015 4 commits
-
-
Wenyou Yang authored
When compiling the kernel in thumb2 (CONFIG_THUMB2_KERNEL option activated), we hit a compilation crash. The error message is listed below: ---8< ----- Error: cannot use register index with PC-relative addressing -- `str r0,.saved_lpr' --->8---- Add the .arm directive in the assembly files related to power management. Signed-off-by:
-
Nicolas Ferre authored
The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Boris Brezillon authored
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by:
-
Boris Brezillon authored
There is no specific driver handling the AHB matrix, this is a simple syscon device. the matrix is needed by several other drivers including the USB on some SoCs (at91sam9261 for instance). Without this definition, the USB will not work on these SoCs. Signed-off-by:
-
- 09 Mar, 2015 1 commit
-
-
Boris Brezillon authored
Peripheral clock is named pclk and system clock is named hclk (those are the names expected by the at91_udc driver). Drop the deprecated usb_clk (formerly used to configure the usb clock rate which is now directly configurable through hclk). Signed-off-by:
-
- 05 Mar, 2015 4 commits
-
-
Patrice Vilchez authored
Because writing the MOR register requires the PASSWD(0x37), if missed, the write operation will be aborted. Signed-off-by:
Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by:
-
Boris BREZILLON authored
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4. Signed-off-by:
-
Boris BREZILLON authored
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by:
-
Alexandre Belloni authored
Linux may be used without MMU on atmel SoCs, fix debug in this configuration. Signed-off-by:
-
- 04 Mar, 2015 5 commits
-
-
Michel Marti authored
Since turning on idle-halt in commit fe46aa67 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by:
Michel Marti <mma@objectxp.com> Acked-by:
-
Sylvain Rochet authored
atmel,idle-halt property should be used with care, it actually makes the watchdog not counting when the CPU is in idle state, therefore the watchdog reset time depends on mean CPU usage and will not reset at all of the CPU stop working while it is in idle state, which is probably not what you want. Signed-off-by:
-
Alexandre Belloni authored
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by:
-
Anthony Harivel authored
Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by:
Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by:
-
Jonas Andersson authored
Corrected pins used by usart3. Signed-off-by:
Jonas Andersson <jonas@microbit.se> Acked-by:
-
- 03 Mar, 2015 5 commits
-
-
Nicolas Ferre authored
Signed-off-by: -
Alexander Stein authored
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by:Alexander Stein <alexanders83@web.de> Acked-by:
-
Alexandre Belloni authored
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by:
-
Alexandre Belloni authored
at91rm9200 standby and suspend to ram has been broken since 00482a40. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a40 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by:
-
Peter Rosin authored
The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by:
Peter Rosin <peda@axentia.se> Acked-by:
-
