- 17 Apr, 2014 14 commits
-
-
Oleg Nesterov authored
See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
Finally we can kill the ugly (and very limited) code in __skip_sstep(). Just change branch_setup_xol_ops() to treat "nop" as jmp to the next insn. Thanks to lib/insn.c, it is clever enough. OPCODE1() == 0x90 includes "(rep;)+ nop;" at least, and (afaics) much more. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
Currently the error from arch_uprobe_post_xol() is silently ignored. This doesn't look good and this can lead to the hard-to-debug problems. 1. Change handle_singlestep() to loudly complain and send SIGILL. Note: this only affects x86, ppc/arm can't fail. 2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and avoid TF games if it is going to return an error. This can help to to analyze the problem, if nothing else we should not report ->ip = xol_slot in the core-file. Note: this means that handle_riprel_post_xol() can be called twice, but this is fine because it is idempotent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
arch_uprobe_analyze_insn() calls handle_riprel_insn() at the start, but only "0xff" and "default" cases need the UPROBE_FIX_RIP_ logic. Move the callsite into "default" case and change the "0xff" case to fall-through. We are going to add the various hooks to handle the rip-relative jmp/call instructions (and more), we need this change to enforce the fact that the new code can not conflict with is_riprel_insn() logic which, after this change, can only be used by default_xol_ops. Note: arch_uprobe_abort_xol() still calls handle_riprel_post_xol() directly. This is fine unless another _xol_ops we may add later will need to reuse "UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX" bits in ->fixup. In this case we can add uprobe_xol_ops->abort() hook, which (perhaps) we will need anyway in the long term. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
-
Oleg Nesterov authored
Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
-
Oleg Nesterov authored
No functional changes. Preparation to simplify the review of the next change. Just reorder the code in arch_uprobe_pre/post_xol() functions so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end. Also change arch_uprobe_pre_xol() to use utask instead of autask, to make the code more symmetrical with arch_uprobe_post_xol(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-
Oleg Nesterov authored
Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
-
Oleg Nesterov authored
Kill the "mm->context.ia32_compat" check in handle_riprel_insn(), if it is true insn_rip_relative() must return false. validate_insn_bits() passed "ia32_compat" as !x86_64 to insn_init(), and insn_rip_relative() checks insn->x86_64. Also, remove the no longer needed "struct mm_struct *mm" argument and the unnecessary "return" at the end. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-
Oleg Nesterov authored
No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-
Oleg Nesterov authored
UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This patch kills UPROBE_SKIP_SSTEP. I never understood why it was added; not only it doesn't help, it harms. It can only help to avoid arch_uprobe_skip_sstep() if it was already called before and failed. But this is ugly, if we want to know whether we can emulate this instruction or not we should do this analysis in arch_uprobe_analyze_insn(), not when we hit this probe for the first time. And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can fail or not depending on the task/register state, if this insn can be emulated but, say, put_user() fails we need to xol it this time, but this doesn't mean we shouldn't try to emulate it when this or another thread hits this bp next time. And this is the actual reason for this change. We need to emulate the "call" insn, but push(return-address) can obviously fail. Per-arch notes: x86: __skip_sstep() can only emulate "rep;nop". With this change it will be called every time and most probably for no reason. This will be fixed by the next changes. We need to change this suboptimal code anyway. arm: Should not be affected. It has its own "bool simulate" flag checked in arch_uprobe_skip_sstep(). ppc: Looks like, it can emulate almost everything. Does it actually need to record the fact that emulate_step() failed? Hopefully not. But if yes, it can add the ppc- specific flag into arch_uprobe. TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(), Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: David A. Long <dave.long@linaro.org> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core Pull perf/core improvements and fixes from Jiri Olsa: User visible changes: * Add --percentage option to control absolute/relative percentage output (Namhyung Kim) Plumbing changes: * Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by completion scripts (Ramkumar Ramachandra) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 16 Apr, 2014 11 commits
-
-
Ramkumar Ramachandra authored
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1394853474-31019-5-git-send-email-artagnon@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1394853474-31019-4-git-send-email-artagnon@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1394853474-31019-3-git-send-email-artagnon@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1394853474-31019-2-git-send-email-artagnon@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
Now perf report will show absolute percentage on filter entries by default. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-8-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
Add 'F' hotkey to toggle relative and absolute percentage of filtered entries. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-7-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
Add hist.percentage option for setting default value of the symbol_conf.filter_relative. It affects the output of various perf commands (like perf report, top and diff) only if filter(s) applied. An user can write .perfconfig file like below to show absolute percentage of filtered entries by default: $ cat ~/.perfconfig [hist] percentage = absolute And it can be changed through command line: $ perf report --percentage relative Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-6-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute" and affects -c delta output only. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". Move the parser callback function into a common location since it's used by multiple commands now. For more information, please see previous commit same thing done to "perf report". Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-4-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The --percentage option is for controlling overhead percentage displayed. It can only receive either of "relative" or "absolute". "relative" means it's relative to filtered entries only so that the sum of shown entries will be always 100%. "absolute" means it retains the original value before and after the filter is applied. $ perf report -s comm # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc 6.11% as 4.35% sh 4.14% make 1.13% fixdep ... $ perf report -s comm -c cc1,gcc --percentage absolute # Overhead Command # ........ ............ # 74.19% cc1 7.61% gcc $ perf report -s comm -c cc1,gcc --percentage relative # Overhead Command # ........ ............ # 90.69% cc1 9.31% gcc Note that it has zero effect if no filter was applied. Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
When filtering by thread, dso or symbol on TUI it also update total period so that the output shows different result than no filter - the percentage changed to relative to filtered entries only. Sometimes this is not desired since users might expect same results with filter. So new filtered_* fields to hists->stats to count them separately. They'll be controlled/used by user later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1397145720-8063-2-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
- 14 Apr, 2014 15 commits
-
-
Ingo Molnar authored
Conflicts: tools/perf/bench/numa.c Pull perf fixes from Jiri Olsa. Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Pick up the latest fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Andi Kleen authored
perf stat did initialize the stats structure used to compute stddev etc. incorrectly. It merely zeroes it. But one member (min) needs to be set to a non zero value. This causes min to be not computed at all. Call init_stats() correctly. It doesn't matter for stat currently because it doesn't use min, but it's still better to do it correctly. The other users of statistics are already correct. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1395768699-16060-1-git-send-email-andi@firstfloor.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
Currently, $ perf bench numa mem errors out with usage information. To make this more user-friendly, let us provide a minimum set of default values required for a test run. As an added bonus, $ perf bench all now goes all the way to completion. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-2-git-send-email-artagnon@gmail.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
At the end of $ perf bench all the program segfaults because it attempts to dereference a NULL pointer. Fix this fault. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-4-git-send-email-artagnon@gmail.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395964219-22173-3-git-send-email-artagnon@gmail.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The dwarf_getcfi() only checks .debug_frame section for CFI, but as most binaries only have .eh_frame it'd return NULL and it makes some variables inaccessible. Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and add probe to more variables. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Masami Hiramatsu authored
As Namhyung reported(https://lkml.org/lkml/2014/4/1/89), current perf-probe -L option doesn't handle errors in line-range searching correctly. It causes a SEGV if an error occured in the line-range searching. ---- $ perf probe -x ./perf -v -L map__load Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf fname: util/map.c, lineno:153 New line range: 153 to 2147483647 path: (null) Segmentation fault (core dumped) ---- This is because line_range_inline_cb() ignores errors from find_line_range_by_line() which means that lr->path is already freed on the error path in find_line_range_by_line(). As a result, get_real_path() accesses the lr->path and it causes a NULL pointer exception. This fixes line_range_inline_cb() to handle the error correctly, and report it to the caller. Anyway, this just fixes a possible SEGV bug, Namhyung's patch is also required. Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140402054831.19080.27006.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The commit 5a62257a ("perf probe: Replace line_list with intlist") replaced line_list to intlist but it has a problem that if a same line was added again, it'd return -EEXIST rather than 1. Since line_range_walk_cb() only checks the result being negative, it resulted in failure or segfault sometimes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396327677-3657-1-git-send-email-namhyung@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Ramkumar Ramachandra authored
The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is defined. This means that under a normal setup, $ make NO_LIBUNWIND=1 won't automatically pick up libdw. Fix this. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jean Pihet <jean.pihet@linaro.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
-
Arnaldo Carvalho de Melo authored
Leaving ghostprotocols.net for old networking stuff. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-jott6d40nkjjc3vvh3vw53lp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Arnaldo Carvalho de Melo authored
I.e. do the same as when NO_LIBELF is explicitely passed in the 'make' command line, fixing this: Auto-detecting system features: ... dwarf: [ OFF ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... DWARF post unwind library: libdw <SNIP> CC /tmp/build/perf/util/symbol-minimal.o CC /tmp/build/perf/util/unwind-libdw.o arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory compilation terminated. CC /tmp/build/perf/tests/keep-tracking.o util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory compilation terminated. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
The patch 3a3ffa2e ("tools lib traceevent: Report better error message on bad function args") added the error message but it seems there's no reason to call warning() directly. So change it to do_warning_event() to provide event information too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1395192174-26273-2-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
It's sometimes useful to know where the parse failure was occurred. Add do_warning_event() macro to see the failing event. It now shows the messages like below: $ perf test 5 5: parse events tests : Warning: [kvmmmu:kvm_mmu_get_page] bad op token { Warning: [kvmmmu:kvm_mmu_sync_page] bad op token { Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token { Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token { Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined Warning: [xen:xen_mmu_ptep_modify_prot_commit] function sizeof not defined Warning: [xen:xen_mmu_ptep_modify_prot_start] function sizeof not defined Warning: [xen:xen_mmu_set_pgd] function sizeof not defined Warning: [xen:xen_mmu_set_pud] function sizeof not defined Warning: [xen:xen_mmu_set_pmd] function sizeof not defined ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1395192174-26273-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-
Namhyung Kim authored
On perf top, the -s option is used for --sort, but the man page contains invalid documentation of -s option for --sym-annotate. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1395193578-27098-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
-