- 08 Dec, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-next auxbus support This pull request is targeting net-next and rdma-next branches. This series provides mlx5 support for auxiliary bus devices. It starts with a merge commit of tag 'auxbus-5.11-rc1' from gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus infrastructure instead of the internal mlx5 device and interface management implementation, which Leon is deleting at the end of this patchset. Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/ Thanks to everyone for the joint effort ! * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: RDMA/mlx5: Remove IB representors dead code net/mlx5: Simplify eswitch mode check net/mlx5: Delete custom device management logic RDMA/mlx5: Convert mlx5_ib to use auxiliary bus net/mlx5e: Connect ethernet part to auxiliary bus vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus net/mlx5: Register mlx5 devices to auxiliary virtual bus vdpa/mlx5: Make hardware definitions visible to all mlx5 devices net/mlx5_core: Clean driver version and name net/mlx5: Properly convey driver version to firmware driver core: auxiliary bus: minor coding style tweaks driver core: auxiliary bus: make remove function return void driver core: auxiliary bus: move slab.h from include file Add auxiliary bus support ==================== Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tariq Toukan authored
All usages of the definition MAX_MSIX_P_PORT were removed. It's not in use anymore. Remove it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Link: https://lore.kernel.org/r/20201206091254.12476-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jarod Wilson authored
We can remove one of the ifdef blocks here, and instead of setting both the xfrm hw_features and features flags, then unsetting the feature flags if not in AB, wait to set the features flags if we're actually in AB mode. Signed-off-by: Jarod Wilson <jarod@redhat.com> Link: https://lore.kernel.org/r/20201205174003.578267-1-jarod@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Sukadev Bhattiprolu authored
We sometimes run into situations where a soft/hard reset of the adapter takes a long time or fails to complete. Having additional messages that include important adapter state info will hopefully help understand what is happening, reduce the guess work and minimize requests to reproduce problems with debug patches. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Link: https://lore.kernel.org/r/20201205022235.2414110-1-sukadev@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 07 Dec, 2020 15 commits
-
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2020-12-07 please apply the following patch series for qeth to netdev's net-next tree. Some sysfs cleanups (with the prep work in ccwgroup acked by Heiko), and a few improvements to the code that deals with async TX completion notifications for IQD devices. This also brings the missing patch from the previous net-next submission. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
When qeth_qdio_handle_aob() frees dangling allocations in the notified TX buffer, there are rare tear-down cases where qeth_drain_output_queue() would later call qeth_clear_output_buffer() for the same buffer - and thus end up walking the buffer a second time to check for dangling kmem_cache allocations. Luckily current code previously scrubs such a buffer, so qeth_clear_output_buffer() would find buf->buffer->element[i].addr as NULL and not do anything. But this is fragile, and we can easily improve it by consistently clearing the ->is_header flag after freeing the allocation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Reuse the QETH_QDIO_BUF_EMPTY state to indicate that a TX buffer has been completed with a QAOB notification, and may be cleaned up by qeth_cleanup_handled_pending(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
For TX buffers that require an additional async notification via QAOB, the TX completion code can now manage all the necessary processing if the notification has already occurred (or is occurring concurrently). In such cases we can avoid replacing the metadata that is associated with the buffer's slot on the ring, and just keep using the current one. As qeth_clear_output_buffer() will also handle any kmem cache-allocated memory that was mapped into the TX buffer, qeth_qdio_handle_aob() doesn't need to worry about it. While at it, also remove the unneeded forward declaration for qeth_init_qdio_out_buf(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
All qeth devices have a minimum set of sysfs attributes, and non-OSN devices share a group of additional attributes. Depending on whether the device is forced to use a specific discipline, the device_type then specifies further attributes. Shift the common attributes into dev->groups, so that the device_type only contains the discipline-specific attributes. This avoids exposing the common attributes to the disciplines, and nicely cleans up our sysfs code. While replacing the qeth_l*_*_device_attributes() helpers, switch from sysfs_*_groups() to the more generic device_*_groups(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Bus drivers have their own way of describing the sysfs attributes that all devices on a bus should provide. Switch ccwgroup_attr_groups over to use bus->dev_groups, and thus free up dev->groups for usage by the ccwgroup device drivers. While adjusting the attribute naming, use ATTRIBUTE_GROUPS() to get rid of some boilerplate code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
INIT_LIST_HEAD() only needs to be called on actual list heads. While at it clarify the naming of the field. Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Misc updates This patchset contains miscellaneous patches we gathered in our queue. Some of them are dependencies of larger patchsets that I will submit later this cycle. Patches #1-#3 perform small non-functional changes in mlxsw. Patch #4 adds more extended ack messages in mlxsw. Patch #5 adds devlink parameters documentation for mlxsw. To be extended with more parameters this cycle. Patches #6-#7 perform small changes in forwarding selftests infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to figure out the IP address and virtual router id. Those are exactly the same as in the fib_entry it is called for. So just use that and reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op code similar to nve. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The indicated version fixes an issue whereby the MOMTE register would by default enable mirroring of ECN-marked traffic from all traffic classes, once the ECN mirroring was configured. This fix is necessary for offload of RED "ecn_mark" qevent. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint whenever a request is sent to the device and whenever a response is received from it. However, the tracepoint is not triggered when an event (e.g., port up / down) is received from the device. Also trace EMAD events in order to log a more complete picture of all the exchanged hardware messages. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In case a router interface (RIF) is configured for a LAG, make sure its configuration is applied on the new LAG member. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Dec, 2020 9 commits
-
-
Leon Romanovsky authored
Delete dead code. Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
Leon Romanovsky authored
Provide mlx5_core device instead of "priv" pointer while checking eswith mode. Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
Leon Romanovsky authored
After conversion to use auxiliary bus, all custom device management is not needed anymore, delete it. Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
Leon Romanovsky authored
The conversion to auxiliary bus solves long standing issue with existing mlx5_ib<->mlx5_core coupling. It required to have both modules in initramfs if one of them needed for the boot. Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
Leon Romanovsky authored
Reuse auxiliary bus to perform device management of the ethernet part of the mlx5 driver. Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
Leon Romanovsky authored
Change module registration logic to use auxiliary bus instead of custom made mlx5 register interface. Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve rtl_rx and NUM_RX_DESC handling This series improves rtl_rx() and the handling of NUM_RX_DESC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
There's no need to check min(budget, NUM_RX_DESC). At first budget (NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256). And more important: Even in case of budget > NUM_RX_DESC we could safely continue processing descriptors as long as they are owned by the CPU. In addition replace rx_left with a normal counter variable, this allows to simplify the code. Last but not least there's no need any longer to pass the budget as an u32. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Dec, 2020 9 commits
-
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204194549.1153063-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - update include for min/max helpers, by Sven Eckelmann - add infrastructure and netlink functions for routing algo selection, by Sven Eckelmann (2 patches) - drop deprecated debugfs and sysfs support and obsoleted functionality, by Sven Eckelmann (3 patches) - drop unused include in fragmentation.c, by Simon Wunderlich * tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge: batman-adv: Drop unused soft-interface.h include in fragmentation.c batman-adv: Drop legacy code for auto deleting mesh interfaces batman-adv: Drop deprecated debugfs support batman-adv: Drop deprecated sysfs support batman-adv: Allow selection of routing algorithm over rtnetlink batman-adv: Prepare infrastructure for newlink settings batman-adv: Add new include for min/max helpers batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arnd Bergmann authored
When CONFIG_OF is disabled, there is a harmless warning about an unused variable: enetc_pf.c: In function 'enetc_phylink_create': enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable] Slightly rearrange the code to pass around the of_node as a function argument, which avoids the problem without hurting readability. Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204120800.17193-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jonathan Lemon authored
The OpenCompute time card is an atomic clock along with a GPS receiver that provides a Grandmaster clock source for a PTP enabled network. More information is available at http://www.timingcard.com/Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201204035128.2219252-2-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Bongsu Jeon authored
implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tom Rix authored
The macro use will already have a semicolon. Clean up escaped newlines. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201202163622.3733506-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hoang Le authored
We add the support to remove a specific node down with 128bit node identifier, as an alternative to legacy 32-bit node address. example: $tipc peer remove identiy <1001002|16777777> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201203035045.4564-1-hoang.h.le@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201204125601.24876-1-simon.horman@netronome.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 04 Dec, 2020 3 commits
-
-
Bongsu Jeon authored
If there isn't a proper NFC firmware image, Bootloader mode will be skipped. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201203225257.2446-1-bongsu.jeon@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Arjun Roy says: ==================== Perf. optimizations for TCP Recv. Zerocopy This patchset contains several optimizations for TCP Recv. Zerocopy. Summarized: 1. It is possible that a read payload is not exactly page aligned - that there may exist "straggler" bytes that we cannot map into the caller's address space cleanly. For this, we allow the caller to provide as argument a "hybrid copy buffer", turning getsockopt(TCP_ZEROCOPY_RECEIVE) into a "hybrid" operation that allows the caller to avoid a subsequent recvmsg() call to read the stragglers. 2. Similarly, for "small" read payloads that are either below the size of a page, or small enough that remapping pages is not a performance win - we allow the user to short-circuit the remapping operations entirely and simply copy into the buffer provided. Some of the patches in the middle of this set are refactors to support this "short-circuiting" optimization. 3. We allow the user to provide a hint that performing a page zap operation (and the accompanying TLB shootdown) may not be necessary, for the provided region that the kernel will attempt to map pages into. This allows us to avoid this expensive operation while holding the socket lock, which provides a significant performance advantage. With all of these changes combined, "medium" sized receive traffic (multiple tens to few hundreds of KB) see significant efficiency gains when using TCP receive zerocopy instead of regular recvmsg(). For example, with RPC-style traffic with 32KB messages, there is a roughly 15% efficiency improvement when using zerocopy. Without these changes, there is a roughly 60-70% efficiency reduction with such messages when employing zerocopy. ==================== Link: https://lore.kernel.org/r/20201202225349.935284-1-arjunroy.kdev@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Zapping pages is required only if we are calling vm_insert_page into a region where pages had previously been mapped. Receive zerocopy allows reusing such regions, and hitherto called zap_page_range() before calling vm_insert_page() in that range. zap_page_range() can also be triggered from userspace with madvise(MADV_DONTNEED). If userspace is configured to call this before reusing a segment, or if there was nothing mapped at this virtual address to begin with, we can avoid calling zap_page_range() under the socket lock. That said, if userspace does not do that, then we are still responsible for calling zap_page_range(). This patch adds a flag that the user can use to hint to the kernel that a zap is not required. If the flag is not set, or if an older user application does not have a flags field at all, then the kernel calls zap_page_range as before. Also, if the flag is set but a zap is still required, the kernel performs that zap as necessary. Thus incorrectly indicating that a zap can be avoided does not change the correctness of operation. It also increases the batchsize for vm_insert_pages and prefetches the page struct for the batch since we're about to bump the refcount. An alternative mechanism could be to not have a flag, assume by default a zap is not needed, and fall back to zapping if needed. However, this would harm performance for older applications for which a zap is necessary, and thus we implement it with an explicit flag so newer applications can opt in. When using RPC-style traffic with medium sized (tens of KB) RPCs, this change yields an efficency improvement of about 30% for QPS/CPU usage. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-