Enable io_uring commands on network sockets. Create two new
SOCKET_URING_OP commands that will operate on sockets.

In order to call ioctl on sockets, use the file_operations->io_uring_cmd
callbacks, and map it to a uring socket function, which handles the
SOCKET_URING_OP accordingly, and calls socket ioctls.

This patches was tested by creating a new test case in liburing.
Link: https://github.com/leitao/liburing/tree/io_uring_cmdSigned-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230627134424.2784797-1-leitao@debian.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Allow usage of IORING_ASYNC_CANCEL_OP through the sync cancelation
API as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add IORING_ASYNC_CANCEL_OP flag for cancelation, which allows the
application to target cancelation based on the opcode of the original
request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a flag to explicitly match on user_data in the request for
cancelation purposes. This is the default behavior if none of the
other match flags are set, but if we ALSO want to match on user_data,
then this flag can be set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Get rid of the request vs io_cancel_data checking and just use the
exported helper for this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We always need to check/update the cancel sequence if
IORING_ASYNC_CANCEL_ALL is set. Also kill the redundant check for
IORING_ASYNC_CANCEL_ANY at the end, if we get here we know it's
not set as we would've matched it higher up.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have different match code in a variety of spots. Start the cleanup of
this by abstracting out a helper that can be used to check if a given
request matches the cancelation criteria outlined in io_cancel_data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for using a generic handler to match requests for
cancelation purposes, ensure that ctx is set in io_cancel_data. The
timeout handlers don't check for this as it'll always match, but we'll
need it set going forward.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This isn't strictly necessary for this callsite, as it uses it's
internal lookup for this cancelation purpose. But let's be consistent
with how it's used in general and set ctx as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull xtensa fixes from Max Filippov:

 - fix interaction between unaligned exception handler and load/store
   exception handler

 - fix parsing ISS network interface specification string

 - add comment about etherdev freeing to ISS network driver

* tag 'xtensa-20230716' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix unaligned and load/store configuration interaction
  xtensa: ISS: fix call to split_if_spec
  xtensa: ISS: add comment about etherdev freeing

Pull perf fix from Borislav Petkov:

 - Fix a lockdep warning when the event given is the first one, no event
   group exists yet but the code still goes and iterates over event
   siblings

* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR

Pull objtool fixes from Borislav Petkov:

 - Mark copy_iovec_from_user() __noclone in order to prevent gcc from
   doing an inter-procedural optimization and confuse objtool

 - Initialize struct elf fully to avoid build failures

* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iov_iter: Mark copy_iovec_from_user() noclone
  objtool: initialize all of struct elf

Pull scheduler fixes from Borislav Petkov:

 - Remove a cgroup from under a polling process properly

 - Fix the idle sibling selection

* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: use kernfs polling functions for PSI trigger polling
  sched/fair: Use recent_used_cpu to test p->cpus_ptr

Pull pin control fixes from Linus Walleij:
 "I'm mostly on vacation but what would vacation be without a few
  critical fixes so people can use their gaming laptops when hiding away
  from the sun (or rain)?

   - Fix a really annoying interrupt storm in the AMD driver affecting
     Asus TUF gaming notebooks

   - Fix device tree parsing in the Renesas driver"

* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Unify debounce handling into amd_pinconf_set()
  pinctrl: amd: Drop pull up select configuration
  pinctrl: amd: Use amd_pinconf_set() for all config options
  pinctrl: amd: Only use special debounce behavior for GPIO 0
  pinctrl: renesas: rzg2l: Handle non-unique subnode names
  pinctrl: renesas: rzv2m: Handle non-unique subnode names

Pull smb client fixes from Steve French:

 - Two reconnect fixes: important fix to address inFlight count to leak
   (which can leak credits), and fix for better handling a deleted share

 - DFS fix

 - SMB1 cleanup fix

 - deferred close fix

* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix mid leak during reconnection after timeout threshold
  cifs: is_network_name_deleted should return a bool
  smb: client: fix missed ses refcounting
  smb: client: Fix -Wstringop-overflow issues
  cifs: if deferred close is disabled then close files immediately

Pull powerpc fixes from Michael Ellerman:

 - Fix Speculation_Store_Bypass reporting in /proc/self/status on
   Power10

 - Fix HPT with 4K pages since recent changes by implementing pmd_same()

 - Fix 64-bit native_hpte_remove() to be irq-safe

Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.

* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
  powerpc/64e: Fix obtool warnings in exceptions-64e.S
  powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
  powerpc/64s: Fix native_hpte_remove() to be irq-safe

Pull hardening fixes from Kees Cook:

 - Remove LTO-only suffixes from promoted global function symbols
   (Yonghong Song)

 - Remove unused .text..refcount section from vmlinux.lds.h (Petr Pavlu)

 - Add missing __always_inline to sparc __arch_xchg() (Arnd Bergmann)

 - Claim maintainership of string routines

* tag 'hardening-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  sparc: mark __arch_xchg() as __always_inline
  MAINTAINERS: Foolishly claim maintainership of string routines
  kallsyms: strip LTO-only suffixes from promoted global functions
  vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount

Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

 - fprobe: Add a comment why fprobe will be skipped if another kprobe is
   running in fprobe_kprobe_handler().

 - probe-events: Fix some issues related to fetch-arguments:

    - Fix double counting of the string length for user-string and
      symstr. This will require longer buffer in the array case.

    - Fix not to count error code (minus value) for the total used
      length in array argument. This makes the total used length
      shorter.

    - Fix to update dynamic used data size counter only if fetcharg uses
      the dynamic size data. This may mis-count the used dynamic data
      size and corrupt data.

    - Revert "tracing: Add "(fault)" name injection to kernel probes"
      because that did not work correctly with a bug, and we agreed the
      current '(fault)' output (instead of '"(fault)"' like a string)
      explains what happened more clearly.

    - Fix to record 0-length (means fault access) data_loc data in fetch
      function itself, instead of store_trace_args(). If we record an
      array of string, this will fix to save fault access data on each
      entry of the array correctly.

* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
  Revert "tracing: Add "(fault)" name injection to kernel probes"
  tracing/probes: Fix to update dynamic data counter if fetcharg uses it
  tracing/probes: Fix not to count error code to total length
  tracing/probes: Fix to avoid double count of the string length on the array
  fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running

Pull spi fixes from Mark Brown:
 "A couple of fairly minor driver specific fixes here, plus a bunch of
  maintainership and admin updates. Nothing too remarkable"

* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  mailmap: add entry for Jonas Gorski
  MAINTAINERS: add myself for spi-bcm63xx
  spi: s3c64xx: clear loopback bit after loopback test
  spi: bcm63xx: fix max prepend length
  MAINTAINERS: Add myself as a maintainer for Microchip SPI

Pull regmap fix from Mark Brown:
 "One fix for an out of bounds access in the interupt code here"

* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix out-of-bounds access when allocating config buffers

Pull iommu fixes from Joerg Roedel:

 - Fix a regression causing a crash on sysfs access of iommu-group
   specific files

 - Fix signedness bug in SVA code

* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
  iommu: Fix crash during syfs iommu_groups/N/type

Pull x86 CFI fixes from Peter Zijlstra:
 "Fix kCFI/FineIBT weaknesses

  The primary bug Alyssa noticed was that with FineIBT enabled function
  prologues have a spurious ENDBR instruction:

    __cfi_foo:
	endbr64
	subl	$hash, %r10d
	jz	1f
	ud2
	nop
    1:
    foo:
	endbr64 <--- *sadface*

  This means that any indirect call that fails to target the __cfi
  symbol and instead targets (the regular old) foo+0, will succeed due
  to that second ENDBR.

  Fixing this led to the discovery of a single indirect call that was
  still doing this: ret_from_fork(). Since that's an assembly stub the
  compiler would not generate the proper kCFI indirect call magic and it
  would not get patched.

  Brian came up with the most comprehensive fix -- convert the thing to
  C with only a very thin asm wrapper. This ensures the kernel thread
  boostrap is a proper kCFI call.

  While discussing all this, Kees noted that kCFI hashes could/should be
  poisoned to seal all functions whose address is never taken, further
  limiting the valid kCFI targets -- much like we already do for IBT.

  So what was a 'simple' observation and fix cascaded into a bunch of
  inter-related CFI infrastructure fixes"

* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
  x86/fineibt: Poison ENDBR at +0
  x86: Rewrite ret_from_fork() in C
  x86/32: Remove schedule_tail_wrapper()
  x86/cfi: Extend ENDBR sealing to kCFI
  x86/alternative: Rename apply_ibt_endbr()
  x86/cfi: Extend {JMP,CAKK}_NOSPEC comment

Pull SCSI fixes from James Bottomley:
 "This is a bunch of small driver fixes and a larger rework of zone disk
  handling (which reaches into blk and nvme).

  The aacraid array-bounds fix is now critical since the security people
  turned on -Werror for some build tests, which now fail without it"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Handle SRB status value 0x30
  scsi: block: Improve checks in blk_revalidate_disk_zones()
  scsi: block: virtio_blk: Set zone limits before revalidating zones
  scsi: block: nullblk: Set zone limits before revalidating zones
  scsi: nvme: zns: Set zone limits before revalidating zones
  scsi: sd_zbc: Set zone limits before revalidating zones
  scsi: ufs: core: Add support for qTimestamp attribute
  scsi: aacraid: Avoid -Warray-bounds warning
  scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
  scsi: ufs: core: Update contact email for monitor sysfs nodes
  scsi: scsi_debug: Remove dead code
  scsi: qla2xxx: Use vmalloc_array() and vcalloc()
  scsi: fnic: Use vmalloc_array() and vcalloc()
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  scsi: qla2xxx: Silence a static checker warning
  scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Don't require quirk to use duplicate namespace identifiers
        (Christoph, Sagi)
      - One more BOGUS_NID quirk (Pankaj)
      - IO timeout and error hanlding fixes for PCI (Keith)
      - Enhanced metadata format mask fix (Ankit)
      - Association race condition fix for fibre channel (Michael)
      - Correct debugfs error checks (Minjie)
      - Use PAGE_SECTORS_SHIFT where needed (Damien)
      - Reduce kernel logs for legacy nguid attribute (Keith)
      - Use correct dma direction when unmapping metadata (Ming)

 - Fix for a flush handling regression in this release (Christoph)

 - Fix for batched request time stamping (Chengming)

 - Fix for a regression in the mq-deadline position calculation (Bart)

 - Lockdep fix for blk-crypto (Eric)

 - Fix for a regression in the Amiga partition handling changes
   (Michael)

* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
  block: queue data commands from the flush state machine at the head
  blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
  nvme-pci: fix DMA direction of unmapping integrity data
  nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
  block/mq-deadline: Fix a bug in deadline_from_pos()
  nvme: ensure disabling pairs with unquiesce
  nvme-fc: fix race between error recovery and creating association
  nvme-fc: return non-zero status code when fails to create association
  nvme: fix parameter check in nvme_fault_inject_init()
  nvme: warn only once for legacy uuid attribute
  block: remove dead struc request->completion_data field
  nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
  nvmet: use PAGE_SECTORS_SHIFT
  nvme: add BOGUS_NID quirk for Samsung SM953
  blk-crypto: use dynamic lock class for blk_crypto_profile::lock
  block/partition: fix signedness issue for Amiga partitions

Pull io_uring fix from Jens Axboe:
 "Just a single tweak for the wait logic in io_uring"

* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
  io_uring: Use io_schedule* in cqring wait

Pull RISC-V fixes from Palmer Dabbelt:

 - fix a formatting error in the hwprobe documentation

 - fix a spurious warning in the RISC-V PMU driver

 - fix memory detection on rv32 (problem does not manifest on any known
   system)

 - avoid parsing legacy parsing of I in ACPI ISA strings

* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Don't include Zicsr or Zifencei in I from ACPI
  riscv: mm: fix truncation warning on RV32
  perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
  Documentation: RISC-V: hwprobe: Fix a formatting error

Pull power management fixes from Rafael Wysocki:
 "These fix hibernation (after recent changes), frequency QoS and the
  sparc cpufreq driver.

  Specifics:

   - Unbreak the /sys/power/resume interface after recent changes (Azat
     Khuzhin).

   - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
     Yang).

   - Remove __init from cpufreq callbacks in the sparc driver, because
     they may be called after initialization too (Viresh Kumar)"

* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sparc: Don't mark cpufreq callbacks with __init
  PM: QoS: Restore support for default value on frequency QoS
  PM: hibernate: Fix writing maj:min to /sys/power/resume

Merge a PM QoS fix and a hibernation fix for 6.5-rc2.

 - Unbreak the /sys/power/resume interface after recent changes (Azat
   Khuzhin).

 - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
   Yang).

* pm-sleep:
  PM: hibernate: Fix writing maj:min to /sys/power/resume

* pm-qos:
  PM: QoS: Restore support for default value on frequency QoS

When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.

This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.

This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.

Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.

Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.

Fixes: 8e670f77 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.

Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull drm fixes from Dave Airlie:
 "There were a bunch of fixes lined up for 2 weeks, so we have quite a
  few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
  nouveau makes an appearance.

  So a bit busier than usual for rc2, but nothing seems out of the
  ordinary.

  fbdev:
   - dma: Fix documented default preferred_bpp value

  ttm:
   - fix warning that we shouldn't mix && and ||
   - never consider pinned BOs for eviction&swap
   - Don't leak a resource on eviction error
   - Don't leak a resource on swapout move error
   - fix bulk_move corruption when adding a entry

  client:
   - Send hotplug event after registering a client

  dma-buf:
   - keep the signaling time of merged fences v3
   - fix an error pointer vs NULL bug

  sched:
   - wait for all deps in kill jobs
   - call set fence parent from scheduled

  i915:
   - Don't preserve dpll_hw_state for slave crtc in Bigjoiner
   - Consider OA buffer boundary when zeroing out reports
   - Remove dead code from gen8_pte_encode
   - Fix one wrong caching mode enum usage

  amdgpu:
   - SMU i2c locking fix
   - Fix a possible deadlock in process restoration for ROCm apps
   - Disable PCIe lane/speed switching on Intel platforms (the platforms
     don't support it)

  nouveau:
   - disp: fix HDMI on gt215+
   - disp/g94: enable HDMI
   - acr: Abort loading ACR if no firmware was found
   - bring back blit subchannel for pre nv50 GPUs
   - Fix drm_dp_remove_payload() invocation

  ivpu:
   - Fix VPU register access in irq disable
   - Clear specific interrupt status bits on C0

  bridge:
   - dw_hdmi: fix connector access for scdc
   - ti-sn65dsi86: Fix auxiliary bus lifetime

  panel:
   - simple: Add connector_type for innolux_at043tn24
   - simple: Add Powertip PH800480T013 drm_display_mode flags"

* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  drm/nouveau: bring back blit subchannel for pre nv50 GPUs
  drm/nouveau/acr: Abort loading ACR if no firmware was found
  drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
  drm/amd: Move helper for dynamic speed switch check out of smu13
  drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
  drm/amd/pm: share the code around SMU13 pcie parameters update
  drm/amdgpu: avoid restore process run into dead loop.
  drm/amd/pm: fix smu i2c data read risk
  drm/nouveau/disp/g94: enable HDMI
  drm/nouveau/disp: fix HDMI on gt215+
  drm/client: Send hotplug event after registering a client
  drm/i915: Fix one wrong caching mode enum usage
  drm/i915: Remove dead code from gen8_pte_encode
  drm/i915/perf: Consider OA buffer boundary when zeroing out reports
  drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
  drm/ttm: never consider pinned BOs for eviction&swap
  drm/fbdev-dma: Fix documented default preferred_bpp value
  dma-buf: fix an error pointer vs NULL bug
  accel/ivpu: Clear specific interrupt status bits on C0
  accel/ivpu: Fix VPU register access in irq disable
  ...

Pull ceph fix from Ilya Dryomov:
 "A fix to prevent a potential buffer overrun in the messenger, marked
  for stable"

* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
  libceph: harden msgr2.1 frame segment length checks

We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadf ("blk-mq: do not do head insertions
post-pre-flush commands").  Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs.  I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.

Fixes: 1e82fadf ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive).  It
never returns more then INT_MAX even if "max" is higher.  It never
returns values in the 0 to (min - 1) range.

The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.

Fixes: 1a14bf0f ("iommu/sva: Use GFP_KERNEL for pasid allocation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountainSigned-off-by: Joerg Roedel <jroedel@suse.de>

The err_restore_domain flow was accidently inserted into the success path
in commit 1000dccd ("iommu: Allow IOMMU_RESV_DIRECT to work on
ARM"). It should only happen if iommu_create_device_direct_mappings()
fails. This caused the domains the be wrongly changed and freed whenever
the sysfs is used, resulting in an oops:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 1 PID: 3417 Comm: avocado Not tainted 6.4.0-rc4-next-20230602 #3
  Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
  RIP: 0010:__iommu_attach_device+0xc/0xa0
  Code: c0 c3 cc cc cc cc 48 89 f0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 48 8b 47 08 <48> 8b 00 48 85 c0 74 74 48 89 f5 e8 64 12 49 00 41 89 c4 85 c0 74
  RSP: 0018:ffffabae0220bd48 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff9ac04f70e410 RCX: 0000000000000001
  RDX: ffff9ac044db20c0 RSI: ffff9ac044fa50d0 RDI: ffff9ac04f70e410
  RBP: ffff9ac044fa50d0 R08: 1000000100209001 R09: 00000000000002dc
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ac043d54700
  R13: ffff9ac043d54700 R14: 0000000000000001 R15: 0000000000000001
  FS:  00007f02e30ae000(0000) GS:ffff9afeb2440000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000012afca006 CR4: 0000000000770ee0
  PKRU: 55555554
  Call Trace:
   <TASK>
   ? __die+0x24/0x70
   ? page_fault_oops+0x82/0x150
   ? __iommu_queue_command_sync+0x80/0xc0
   ? exc_page_fault+0x69/0x150
   ? asm_exc_page_fault+0x26/0x30
   ? __iommu_attach_device+0xc/0xa0
   ? __iommu_attach_device+0x1c/0xa0
   __iommu_device_set_domain+0x42/0x80
   __iommu_group_set_domain_internal+0x5d/0x160
   iommu_setup_default_domain+0x318/0x400
   iommu_group_store_type+0xb1/0x200
   kernfs_fop_write_iter+0x12f/0x1c0
   vfs_write+0x2a2/0x3b0
   ksys_write+0x63/0xe0
   do_syscall_64+0x3f/0x90
   entry_SYSCALL_64_after_hwframe+0x6e/0xd8
  RIP: 0033:0x7f02e2f14a6f

Reorganize the error flow so that the success branch and error branches
are clearer.

Fixes: 1000dccd ("iommu: Allow IOMMU_RESV_DIRECT to work on ARM")
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-5bd8cc969d9e+1f1-iommu_set_def_fix_jgg@nvidia.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)

Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/

Fixes: 40b53b77 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.5-2023-07-12:

amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk

A couple of nouveau patches addressing improving HDMI support and
firmware handling, a fix for TTM to skip pinned BO when evicting, and a
fix for the fbdev documentation.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/nq3ke75juephbex5acfyi5t6bxv22nhmfcpfhru55haj2nv3us@gehrlmjbqgjk