Since ieee80211_tx_info does not have enough room to encode HE rates, HE
drivers use status->rate to provide rate info.
Store it in struct sta_info and use it for AQL.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY
and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong.
Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well.

Cc: stable@vger.kernel.org
Fixes: 43e64bf3 ("cfg80211: handle 6 GHz capability of new station")
Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.

Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit
   8dcf2ad3 ("net: atlantic: add hwmon getter for MAC temperature")

implemented a read callback with an udelay(10000U). This fails to
compile on ARM because the delay is >1ms. I doubt that it is needed to
spin for 10ms even if possible on x86.

>From looking at the code, the context appears to be preemptible so using
usleep() should work and avoid busy spinning.

Use readx_poll_timeout() in the poll loop.

Fixes: 8dcf2ad3 ("net: atlantic: add hwmon getter for MAC temperature")
Cc: Mark Starovoytov <mstarovoitov@marvell.com>
Cc: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The old code for i2c write would break on some controllers, which fails
at handling Repeated Start Condition. So we will just use i2c_master_send
to handle write in one transanction.

Changes since v1:
- Remove indentation change
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Evidently, when I did this previously, we didn't have more than
10 policies and didn't run into the reallocation path, because
it's missing a memset() for the unused policies. Fix that.

Fixes: d07dcf9a ("netlink: add infrastructure to expose policies to userspace")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shay Agroskin says:

====================
Bug fixes for ENA ethernet driver

This series adds the following:
- Fix undesired call to ena_restore after returning from suspend
- Fix condition inside a WARN_ON
- Fix overriding previous value when updating missed_tx statistic

v1->v2:
- fix bug when calling reset routine after device resources are freed (Jakub)

v2->v3:
- fix wrong hash in 'Fixes' tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.

This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.

Fixes: 11095fdb ("net: ena: add statistics for missed tx packets")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ena_del_napi_in_range() function unregisters the napi handler for
rings in a given range.
This function had the following WARN_ON macro:

    WARN_ON(ENA_IS_XDP_INDEX(adapter, i) &&
	    adapter->ena_napi[i].xdp_ring);

This macro prints the call stack if the expression inside of it is
true [1], but the expression inside of it is the wanted situation.
The expression checks whether the ring has an XDP queue and its index
corresponds to a XDP one.

This patch changes the expression to
    !ENA_IS_XDP_INDEX(adapter, i) && adapter->ena_napi[i].xdp_ring
which indicates an unwanted situation.

Also, change the structure of the function. The napi handler is
unregistered for all rings, and so there's no need to check whether the
index is an XDP index or not. By removing this check the code becomes
much more readable.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.

This creates the following bug:
    The driver is suspended and the ena_suspend() function is called
	-> This function calls ena_destroy_device() to free the net device
	   resources
	    -> The driver waits for the timer routine to finish
	    its execution and then cancels it, thus preventing from it
	    to be called again.

    If, in its final execution, the timer routine schedules a reset,
    the reset routine might be called afterwards,and a redundant call to
    ena_restore_device() would be made.

By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.

The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.

Fixes: 8c5c7abd ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig help text contains the phrase "the the" in the help
text. Fix this and reformat the block of help text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig help text contains the phrase "the the" in the help
text. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxim Mikityanskiy says:

====================
ethtool-netlink bug fixes

This series contains a few bug fixes for ethtool-netlink. These bugs are
specific for the netlink interface, and the legacy ioctl interface is
not affected. These patches aim to have the same behavior in
ethtool-netlink as in the legacy ethtool.

Please also see the sibling series for the userspace tool.

v2 changes: Added Fixes tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The legacy ethtool userspace tool shows an error when no features could
be changed. It's useful to have a netlink reply to be able to show this
error when __netdev_update_features wasn't called, for example:

1. ethtool -k eth0
   large-receive-offload: off
2. ethtool -K eth0 rx-fcs on
3. ethtool -K eth0 lro on
   Could not change any device features
   rx-lro: off [requested on]
4. ethtool -K eth0 lro on
   # The output should be the same, but without this patch the kernel
   # doesn't send the reply, and ethtool is unable to detect the error.

This commit makes ethtool-netlink always return a reply when requested,
and it still avoids unnecessary calls to __netdev_update_features if the
wanted features haven't changed.

Fixes: 0980bfcd ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool-netlink ignores dev->hw_features and may confuse the drivers by
asking them to enable features not in the hw_features bitmask. For
example:

1. ethtool -k eth0
   tls-hw-tx-offload: off [fixed]
2. ethtool -K eth0 tls-hw-tx-offload on
   tls-hw-tx-offload: on
3. ethtool -k eth0
   tls-hw-tx-offload: on [fixed]

Fitler out dev->hw_features from req_wanted to fix it and to resemble
the legacy ethtool behavior.

Fixes: 0980bfcd ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, ethtool-netlink calculates new wanted bits as:
(req_wanted & req_mask) | (old_active & ~req_mask)

It completely discards the old wanted bits, so they are forgotten with
the next ethtool command. Sample steps to reproduce:

1. ethtool -k eth0
   tx-tcp-segmentation: on # TSO is on from the beginning
2. ethtool -K eth0 tx off
   tx-tcp-segmentation: off [not requested]
3. ethtool -k eth0
   tx-tcp-segmentation: off [requested on]
4. ethtool -K eth0 rx off # Some change unrelated to TSO
5. ethtool -k eth0
   tx-tcp-segmentation: off # "Wanted on" is forgotten

This commit fixes it by changing the formula to:
(req_wanted & req_mask) | (old_wanted & ~req_mask),
where old_active was replaced by old_wanted to account for the wanted
bits.

The shortcut condition for the case where nothing was changed now
compares wanted bitmasks, instead of wanted to active.

Fixes: 0980bfcd ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to do 3 things for ipv6_dev_find():

  As David A. noticed,

  - rt6_lookup() is not really needed. Different from __ip_dev_find(),
    ipv6_dev_find() doesn't have a compatibility problem, so remove it.

  As Hideaki suggested,

  - "valid" (non-tentative) check for the address is also needed.
    ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
    traverse the address hash list, but it's heavy to be called
    inside ipv6_dev_find(). This patch is to reuse the code of
    ipv6_chk_addr_and_flags() for ipv6_dev_find().

  - dev parameter is passed into ipv6_dev_find(), as link-local
    addresses from user space has sin6_scope_id set and the dev
    lookup needs it.

Fixes: 81f6cb31 ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
   is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
   slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.

I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.

Fixes: b2220cad ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear().
we should handle this correctly or we would get wrong sk_buff.

Fixes: 6fa01ccd ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ganji Aravind says:

====================
cxgb4: Fix ethtool selftest flits calculation

Patch 1 will fix work request size calculation for loopback selftest.

Patch 2 will fix race between loopback selftest and normal Tx handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Even after Tx queues are marked stopped, there exists a
small window where the current packet in the normal Tx
path is still being sent out and loopback selftest ends
up corrupting the same Tx ring. So, ensure selftest takes
the Tx lock to synchronize access the Tx ring.

Fixes: 7235ffae ("cxgb4: add loopback ethtool self-test")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Work request used for sending loopback packet needs to add
the firmware work request only once. So, fix by using
correct structure size.

Fixes: 7235ffae ("cxgb4: add loopback ethtool self-test")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: more EF100 fixes

Fix up some bugs in the initial EF100 submission, and re-fix
 the hash_valid fix which was incomplete.

The reset bugs are currently hard to trigger; they were found
 with an in-progress patch adding ethtool support, whereby
 ethtool --reset reliably reproduces them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If efx_nic_init_interrupt fails, or was never run (e.g. due to an earlier
 failure in ef100_net_open), freeing irqs in efx_nic_fini_interrupt is not
 needed and will cause error messages and stack traces.
So instead, only do this if efx_nic_init_interrupt successfully completed,
 as indicated by the new efx->irqs_hooked flag.

Fixes: 965b549f ("sfc_ef100: implement ndo_open/close and EVQ probing")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an ef100_net_open() fails, ef100_net_stop() may be called without
 channel->rps_flow_id having been written; thus it may hold the address
 freed by a previous ef100_net_stop()'s call to efx_remove_filters().
 This then causes a double-free when efx_remove_filters() is called
 again, leading to a panic.
To prevent this, after freeing it, overwrite it with NULL.

Fixes: a9dc3d56 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When downing and upping the ef100 filter table, we need to take a write
 lock on efx->filter_sem, not just a read lock, because we may kfree()
 the table pointers.
Without this, resets cause a WARN_ON from efx_rwsem_assert_write_locked().

Fixes: a9dc3d56 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Actually hook up the .rx_buf_hash_valid method in EF100's nic_type.

Fixes: 06888543 ("sfc: check hash is valid before using it")
Reported-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull mailmap update from Kees Cook:
 "This was originally part of my pstore tree, but when I realized that
  mailmap needed re-alphabetizing, I decided to wait until -rc1 to send
  this, as I saw a lot of mailmap additions pending in -next for the
  merge window.

  It's a programmatic reordering and the addition of a pstore
  contributor's preferred email address"

* tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mailmap: Add WeiXiong Liao
  mailmap: Restore dictionary sorting

Pull networking fixes from David Miller:
 "Another batch of fixes:

  1) Remove nft_compat counter flush optimization, it generates warnings
     from the refcount infrastructure. From Florian Westphal.

  2) Fix BPF to search for build id more robustly, from Jiri Olsa.

  3) Handle bogus getopt lengths in ebtables, from Florian Westphal.

  4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
     Oleksij Rempel.

  5) Reset iter properly on mptcp sendmsg() error, from Florian
     Westphal.

  6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.

  7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.

  8) Fix double unregister in bonding during namespace tear down, from
     Cong Wang.

  9) Disable RP filter during icmp_redirect selftest, from David Ahern"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  otx2_common: Use devm_kcalloc() in otx2_config_npa()
  net: qrtr: fix usage of idr in port assignment to socket
  selftests: disable rp_filter for icmp_redirect.sh
  Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
  phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
  mptcp: sendmsg: reset iter on error redux
  net: devlink: Remove overzealous WARN_ON with snapshots
  tipc: not enable tipc when ipv6 works as a module
  tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
  net: Fix potential wrong skb->protocol in skb_vlan_untag()
  net: xdp: pull ethernet header off packet after computing skb->protocol
  ipvlan: fix device features
  bonding: fix a potential double-unregister
  can: j1939: add rxtimer for multipacket broadcast session
  can: j1939: abort multipacket broadcast session when timeout occurs
  can: j1939: cancel rxtimer on multipacket broadcast session complete
  can: j1939: fix support for multipacket broadcast message
  net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
  net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
  net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
  ...

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.

To avoid the problem, switch to idr_alloc_u32() instead.

Fixes: bdabad3e ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

WeiXiong Liao noted to me offlist that his preference for email address
had changed and that he'd like it updated in the mailmap so people
discussing pstore/blk would be able to reach him.

Cc: WeiXiong Liao <gmpy.liaowx@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

Several names had been recently appended (instead of inserted). While
git-shortlog doesn't need this file to be sorted, it helps humans to
keep it organized this way. Sort the entire file (which includes some
minor shuffling for dictionary order).

Done with the following commands:

	grep -E '^(#|$)' .mailmap > .mailmap.head
	grep -Ev '^(#|$)' .mailmap > .mailmap.body
 	sort -f .mailmap.body > .mailmap.body.sort
	cat .mailmap.head .mailmap.body.sort > .mailmap
	rm .mailmap.head .mailmap.body.sort
Signed-off-by: Kees Cook <keescook@chromium.org>

This reverts commit f8414a8d.

eth_type_trans() does the necessary pull on the skb.
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a kernel-doc warning for the pcs_config() function prototype:

../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config'

Fixes: 7137e18f ("net: phylink: add struct phylink_pcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Impose a limit on the number of watches that a user can hold so that
they can't use this mechanism to fill up all the available memory.

This is done by putting a counter in user_struct that's incremented when
a watch is allocated and decreased when it is released.  If the number
exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN.

This can be tested by the following means:

 (1) Create a watch queue and attach it to fd 5 in the program given - in
     this case, bash:

	keyctl watch_session /tmp/nlog /tmp/gclog 5 bash

 (2) In the shell, set the maximum number of files to, say, 99:

	ulimit -n 99

 (3) Add 200 keyrings:

	for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done

 (4) Try to watch all of the keyrings:

	for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done

     This should fail when the number of watches belonging to the user hits
     99.

 (5) Remove all the keyrings and all of those watches should go away:

	for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done

 (6) Kill off the watch queue by exiting the shell spawned by
     watch_session.

Fixes: c73be61c ("pipe: Add general notification queue support")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fix wasn't correct: When this function is invoked from the
retransmission worker, the iterator contains garbage and resetting
it causes a crash.

As the work queue should not be performance critical also zero the
msghdr struct.

Fixes: 35759383 "(mptcp: sendmsg: reset iter on error)"
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>