- 22 Aug, 2009 40 commits
-
-
Ravi Anand authored
Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Chandra Seetharaman authored
Use scsi_dh_set_params() set parameters provided. Save the parameters in parse_hw_handler() and use it in parse_path(). Reported-by:
Eddie Williams <Eddie.Williams@steeleye.com> Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Tested-by:
-
Chandra Seetharaman authored
Handle the parameters provided by user thru multipath. This handler expects only 2 parameters and their value can either be 0 or 1. This code originates from the old dm-emc.c file. Appropriate changes have been made to make it work in the new design. Reported-by:
-
Chandra Seetharaman authored
When we moved the device handler functionality from dm layer to SCSI layer we dropped the parameter functionality. This path adds an interface to scsi dh layer to set device handler parameters. Basically, multipath layer need to create a string with all the parameters and call scsi_dh_set_params() after it called scsi_dh_attach() on a device. If a device handler provides such an interface it will handle the parameters as it expects them. Reported-by:
-
James Bottomley authored
Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by:
-
James Bottomley authored
Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by:
-
James Bottomley authored
In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by:
-
Brian King authored
ipr_cmd_label[] isn't big enough for an eight byte string plus terminator. Fix by shortening the string to seven bytes. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Anil Veerabhadrappa authored
When bnx2i_adapter_ready() fails, connection handle(cid) = 0 is wrongly freed because 'cid' is not yet allocated for the endpoint. Fix is to initialize bnx2i_ep->ep_iscsi_cid to '-1' in bnx2i_alloc_ep() and not in bnx2i_ep_connect() to avoid releasing invalid 'cid'. There is already a check in bnx2i_free_iscsi_cid() not to free invalid iscsi connection handle (-1) Signed-off-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by:
-
Anil Veerabhadrappa authored
Without the fix bnx2i would fail tt->xmit_task() when link is down and libiscsi would have already incremented session->cmdsn before calling bnx2i's xmit_task() entry point and will just return the command to SCSI-ML when xmit_task() fails. libiscsi does not retract the session->cmdsn as the command was never sent on wire. It is generally good idea for LLD, bnx2i to accept the scsi cmnd/nopout and let upper layer timeout and go though normal session recovery process. When link is down, unsolicited nopout will not be accepted by bnx2i and connection will never enter recovery state. This fix is required for MPIO to work corectly Signed-off-by:
-
Vasu Dev authored
The phys_dev was used only to locate common offload EM instance for all FCoE instances on a eth devices in function fcoe_em_config, so just updated fcoe_em_config to look for actual real eth device in locating common offload EM instance and then no need to store phys_dev in fcoe_softc, so removes phys_dev from fcoe_softc also. Renames fcoe_softc real_dev to netdev and updates all its uses to use netdev. So effectively no functional change, use of single netdev instead phys_dev and real_dev saves one pointer memory in fcoe_softc, also real_dev used here was confusing with vlan driver terminology since real_dev in vlan driver is referred to physical eth device. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Yi Zou authored
I don't believe this check is needed any more in the current kernel, which, if I understand correctly, is for compound page where only the first page is supposed to get ref-counted. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Yi Zou authored
FC_FRAME_SG_LEN is 4 which is too small when offload is enabled. Actually, the WARN_ON() in fc_fcp_send_data() should be: WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags > MAX_SKB_FRAGS); But since we will not get anything more than 64K anyway, so there is no need to do this anyway here. Therefore, I am getting rid of FC_FRAME_SG_LEN here and the WARN_ON here. Signed-off-by:
-
Yi Zou authored
Remove the extra ifdef for NETIF_F_FSO and NETIF_F_FCOE_CRC since they are already defined in the current kernel as in include/linux/netdevice.h. Signed-off-by:
-
Vasu Dev authored
Updates fcoe_em_config to allocate a single instance of sharable offload EM for supported lp->lro_xid per eth device, and then share this EM for subsequently more lports creation on same eth device (e.g when using VLAN). Adds tiny fcoe_oem_match function for offload EM to return true for read types IO to have read IO exchanges allocated from offload shared EM. Removes fc_em_alloc_xid function completely which was needed to manage two xid ranges within a EM, this is not needed any more with allocation of separate sharable offload EM per eth device. Instead this patch adds simple xid allocation logic to manage single xid range. Adds fc_exch_em_alloc with mp->next_xid as cursor to allocate new xid from single xid range of EM, uses mp->next_xid instead removed mp->last_xid which slightly increase probability of finding empty xid on exch allocation. Removes restriction of not allowing use of xid zero along with changing two xid range change to single xid range. Makes fc_fcp_ddp_setup calling conditional to only xid allocated from shared offload EM. Signed-off-by:
-
Vasu Dev authored
Modifies fcoe_hostlist_lock uses such that a new EM allocation in fcoe_em_config and adding new fcoe_softc using fcoe_hostlist_add are atomic, this is to ensure that a shared offload EM gets allocated only once per eth device for its all lports. Signed-off-by:
-
Vasu Dev authored
Modifies current code to use EM anchor list in EM allocation, EM free, EM reset, exch allocation and exch lookup code paths. 1. Modifies fc_exch_mgr_alloc to accept EM match function and then have allocated EM added to the lport using fc_exch_mgr_add API while also updating EM kref for newly added EM. 2. Updates fc_exch_mgr_free API to accept only lport pointer instead EM and then have this API free all EMs of the lport from EM anchor list. 3. Removes single lport pointer link from the EM, which was used in associating lport pointer in newly allocated exchange. Instead have lport pointer passed along new exchange allocation call path and then store passed lport pointer in newly allocated exchange, this will allow a single EM instance to be used across more than one lport and used in EM reset to reset only lport specific exchanges. 4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list of the lport, adds additional exch lport pointer (ep->lp) check for shared EM case to reset exchange specific to a lport requested reset. 5. Updates exch allocation API fc_exch_alloc to use EM anchor list and its anchor match func pointer. The fc_exch_alloc will walk the list of EMs until it finds a match, a match will be either null match func pointer or call to match function returning true value. 6. Updates fc_exch_recv to accept incoming frame on local port using only lport pointer and frame pointer without specifying EM instance of incoming frame. Instead modified fc_exch_recv to locate EM for the incoming frame by matching xid of incoming frame against a EM xid range. This change was required to use EM list in libfc Rx path and after this change the lport fc_exch_mgr pointer emp is not needed anymore, so removed emp pointer. 7. Updates fnic for removed lport emp pointer and above modified libfc APIs fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free. 8. Removes exch_get and exch_put from libfc_function_template as these are no longer needed with EM anchor list and its match function use. Also removes its default function fc_exch_get. A defect this patch introduced regarding the libfc initialization order in the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>. Signed-off-by: -
Robert Love authored
Currently there is a 1:1 relationship between the lport and exchange manager. This macro takes an EM as an argument and determines the lport from it. However, later patches will use an EM list per lport, so we will no longer have this 1:1 relationship- this macro must change. The FC_EM_DBG macro is rarely used. There are four callers, two can use FC_LPORT_DBG instead and two can be removed since they're not necessary. This patch makes those changes and removes the macro. Signed-off-by:
-
Vasu Dev authored
Adds EM list using a anchor struct fc_exch_mgr_anchor, anchor is used to allow same EM instance sharing across more than one lport on a eth device, this implementation is per discussed design posted at http://www.open-fcoe.org/pipermail/devel/2009-June/002566.html. The shared EM is required for multiple lports on eth device when using multiple VLANs or NPIV. Adds fc_exch_mgr_add API to add a EM to the lport and fc_exch_mgr_del API to delete previously added EM. Also adds function fc_exch_mgr_destroy() to destroy allocated EM. The kref is added to the EM to keep track of EM usage count, the EM is destroyed when no longer in use upon kref reaching to zero. The caller can specify match function to fc_exch_mgr_add, this will be used in determining exchange allocation from its EM or not. Moved calling of fcoe_em_config below fcoe_libfc_config calling, so that list head lp->ema_list is initialized before configuring EM. Signed-off-by:
-
Joe Eykholt authored
The timer for rport retries wasn't getting canceled, and would occasionally go off after the module was unloaded. Add logic to cancel the timer in fc_rport_work(). Since we cancel the timer before deleting the rdata, it is no longer necessary to do a get_device() for the pending timer. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
-
Joe Eykholt authored
fc_rport_logoff drops the rport lock in order to cancel work that may be pending. This is undesirable as the state can completely change, and the caller may not expect that the lock could've been dropped. If there is work pending, it will acquire the rdata mutex and so we're protected and can change the event from READY to DELETE. Queue the work only if there is no event already pending. There were a couple other cases where the state was set to DELETE and work queued, even though the state may have already been DELETE. Fix these using a common function fc_rport_enter_delete(). Signed-off-by:
-
Joe Eykholt authored
State RPORT_ST_NONE was intented to be an invalid state (0), never used. This was a misguided attempt to be sure it was always initialized. Having an extra state meaning nothing requires switch statements to have a case covering that state. State NONE has been used instead to mean the remote port is being deleted. Changing the name to RPORT_ST_DELETE. Signed-off-by:
-
Joe Eykholt authored
We saw periodic messages like: WARNING: at drivers/scsi/libfc/fc_exch.c:825 fc_seq_start_next+0x30/0x4b This was due to trying to allocate a sequence in a request handler when the exchange had been reset. Delete the WARN_ON. Signed-off-by:
-
Joe Eykholt authored
During an fcoe module unload, we saw a problem where fc_rport_work() finds the lport has been freed. The rdata points to an area containing 0x6b6b6b6b... the pool poison value from kmem_free(). In fcoe_if_destroy() we call fc_fabric_logoff() then fc_lport_destroy(). fc_fabric_logoff() flushes the remote port work, but we're still receiving requests, and an RSCN or PLOGI arrives which creates more rports. Note that although the LLD also checks link_up, it doesn't do it under the lport mutex, so it can deliver frames to fc_lport_recv_req() even after link_up is cleared. So, re-check link_up there. We need to flush the rports by calling disc_stop_final() after we clear link_up. Signed-off-by:
-
Joe Eykholt authored
When removing the fcoe module, several lports were being shut down through fc_lport_fabric_logoff(). Occasionally, one would enter reset state before fc_lport_destroy() was called, and since link_up was still true, it would log back in. If we just clear link_up earlier, then we wouldn't be accepting LOGO requests from other initiators while we are shutting down. Fix by changing the LOGO response handler to enter DISABLED instead of RESET. Add an fc_lport_enter_disabled() function which does what fc_lport_enter_reset() did, except it doesn't proceed to FLOGI state. Move the code that was common between fc_lport_enter_reset() and fc_lport_enter_disabled() into a new fc_lport_reset_locked() function. Signed-off-by:
-
Joe Eykholt authored
The state NONE was meant to be invalid, but has been used as the initial state. Rename it to be DISABLED, as more descriptive. Further patches will make it the like the RESET state, except it won't transition to FLOGI until fc_lport_fabric_login() is called. Signed-off-by:
-
Joe Eykholt authored
To be more sure that no more input arrives at the local port as it is being destroyed, clean the queues in the per-cpu receive threads. Signed-off-by:
-
Joe Eykholt authored
libfc debug messages currently show 'lport: <fc-id>:' wher <fc-id> is the hex assigned port-id. When the lport is logged off, that will be zero, so its hard to distinguish which instance is involved. The FC-ID can change if the port is re-patched or changes VSANs. Two lports may even have the same FC-ID if connected to isolated SANs. Change the debug messages to print the SCSI host number "hostN:", which will not change for the life of the lport. Still show the FC_ID on lport messages. Also, add a macro to FC_RPORT_ID_DBG for rport debugging where there's no rdata structure involved. It takes the lport and port_id as parameters. Use this in fc_rport_recv_plogi_req() and fc_rport_recv_logo_req(). Signed-off-by:
-
Joe Eykholt authored
This is unlikely to cause any problems, but the libfc debug macros introduce extra undesirable semicolons. Signed-off-by:
-
Yi Zou authored
No need to check phys_dev here, just call dev_ethtool_get_settings() directly will take care of this. Signed-off-by:
-
Yi Zou authored
When encap the els for FIP, set the fip_flags according to the FCF and lport's capability of supporting SPMA or FPMA or both. Signed-off-by:
-
Yi Zou authored
Fix this bug of validating the wrong mac address while checking for SAN MAC address support from LLD as we should check ha->addr not ctlr.ctl_src_addr. Signed-off-by:
-
Mike Christie authored
alua_activate only sends a STPG if only explicit is suppored. As a result, for EMC targets that support both we end up doing a implicit failover when X commands are finally sent to the other SP. This patch does a AND on the h->tpgs, so we do a explicit failover right away. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
James Bottomley authored
There are two setup places for max_phys in scsi_transport_sas.c; one incorrectly places a NULL into host_attrs instead of port_attrs. Remove it. Reported-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Update driver version to 8.3.4 Signed-off-by:
-
James Smart authored
Remove spaces before newlines in several log messages Signed-off-by:
-
James Smart authored
Add bsg (SGIOv4) support for sending and receiving ELS, CT commands This patch adds a new file, lpfc_bsg.c. Signed-off-by:
-
James Smart authored
NPIV vport fixes - Fixed static vport creation on SLI4 HBAs - Fixed vport create sending init_vpi before REG_VFI - Fix unable to create vports on SLI4 HBA's Port2 Signed-off-by:
-
James Smart authored
Fix a pair of FCoE issues - Fix Region 23 FCoE Parameters not being read correctly - Fix race condition when there are FCoE events during FCF table read Signed-off-by:
-
