- 27 Sep, 2006 36 commits
-
-
Atsushi Nemoto authored
* export asm/sgidefs.h * include asm/isadep.h only if in kernel * do not export contents of asm/timex.h and asm/user.h Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
generic__raw_read_trylock() is a defect generic function actually doing a __raw_read_lock ... Signed-off-by: -
Maciej W. Rozycki authored
Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Signed-off-by:
-
Alexander Bigga authored
I've encountered a serious problem with PCI config space access on Au1x000 platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine. So I was looking for the differences: Symptoms: - no PCI-device is seen on bootup though two or three cards are present - lspci output is empty - OR: lspci shows 20 times the same device (- OR: in some slot-configurations it worked anyhow) System(s): 1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500 with backplane for three PCI-devices) 2. platform with Au1550 and two PCI-devices (custom board) Debugging: I digged down to the config_access() of the au1xxx-processors in arch/mips/pci/ops-au1000.c and switched on DEBUG. The code of config_access() seems to be almost the same as of the 2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0) once on booting is different. That's of course not forbidden. But the alignment seems to be wrong. In my case, I received: 2.4.31: pci_cfg_vm->addr = c0000000 2.6.18-rc5: pci_cfg_vm->addr = c0101000 To make it short: With 2.6.x it fails on the first config-access with: "PCI ERR detected: status 83a00356". Fixup: My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I found in gitweb). Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works fine. Signed-off-by: -
Atsushi Nemoto authored
Since lmo commit 323a380bf9e1a1679a774a2b053e3c1f2aa3f179 ("Simplify dump_stack()") made prepare_frametrace() always inlined, using $2 (v0) in __asm__ is not safe anymore. We can use $1 (at) instead. Also we should use "dla" instead of "la" for 64-bit kernel. Signed-off-by: -
Atsushi Nemoto authored
c-r4k.c and c-sb1.c use drop_mmu_context() to flush virtually tagged I-caches, but this does not work for flushing other task's icache. This is for example triggered by copy_to_user_page() called from ptrace(2). Use indexed flush for such cases. Signed-off-by:
-
Elizabeth Oldham authored
XTC can only be set if VPA is clear, which it may not be. There is also the possibility of a back to back c0 register access hazard to take care of. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
dclz() expects its 64-bit argument being passed as a single register but on 32-bit kernels it'll actually be in a register pair. Signed-off-by: -
Ralf Baechle authored
... kconfig will do weird stuff. Signed-off-by: -
Ralf Baechle authored
The driver has not been merged yet so selecting it results in a warning message. Signed-off-by: -
Ralf Baechle authored
On the 34K the redundant cache operations were causing excessive stalls resulting in realtime code running on the second VPE missing its deadline. For all other platforms this patch is just a significant performance improvment as illustrated by below benchmark numbers. Processor, Processes - times in microseconds - smaller is better ------------------------------------------------------------------------------ Host OS Mhz null null open slct sig sig fork exec sh call I/O stat clos TCP inst hndl proc proc proc --------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 25Kf 2.6.18-rc4 533 0.49 1.16 7.57 33.4 30.5 1.34 12.4 5497 17.K 54.K 25Kf 2.6.18-rc4-p 533 0.49 1.16 6.68 23.0 30.7 1.36 8.55 5030 16.K 48.K 4Kc 2.6.18-rc4 80 4.21 15.0 131. 289. 261. 16.5 258. 18.K 70.K 227K 4Kc 2.6.18-rc4-p 80 4.34 13.1 128. 285. 262. 18.2 258. 12.K 52.K 176K 34Kc 2.6.18-rc4 40 5.01 14.0 61.6 90.0 477. 17.9 94.7 29.K 108K 342K 34Kc 2.6.18-rc4-p 40 4.98 13.9 61.2 89.7 475. 17.6 93.7 8758 44.K 158K BCM1480 2.6.18-rc4 700 0.28 0.60 3.68 5.92 16.0 0.78 5.08 931. 3163 15.K BCM1480 2.6.18-rc4-p 700 0.28 0.61 3.65 5.85 16.0 0.79 5.20 395. 1464 8385 TX49-16K 2.6.18-rc3 197 0.73 2.41 19.0 37.8 82.9 2.94 17.5 4438 14.K 56.K TX49-16K 2.6.18-rc3-p 197 0.73 2.40 19.9 36.3 82.9 2.94 23.4 2577 9103 38.K TX49-32K 2.6.18-rc3 396 0.36 1.19 6.80 11.8 41.0 1.46 8.17 2738 8465 32.K TX49-32K 2.6.18-rc3-p 396 0.36 1.19 6.82 10.2 41.0 1.46 8.18 1330 4638 18.K Original patch by me with enhancements by Atsushi Nemoto. Signed-off-by: -
Ralf Baechle authored
In entry.S resume_userspace ... jal do_notify_resume form a loop through which the kernel will iterate as long as work is pending. If we iterate through this loop more than once with no signal pending for at least one but the last iteration we will take do the syscall restarting multiple times resulting in a syscall return prior to the the syscall instruction in userspace. This may happen when debugging a multithreaded program. Debugging and original fix by Maciej; extended to other ABIs by me. Signed-off-by:
-
Chris Dearman authored
Recent 34Ks come out of reset with WP enabled on VPE 1 so we take an immediate exception when starting the second VPE. Signed-off-by:
Chris Dearman <chris@mips.com> Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
CONFIG_IRQ_PER_CPU now controls the IRQ_PER_CPU stuff. Signed-off-by: -
Franck Bui-Huu authored
This patch allows unwind_stack() to return ra for leaf function. But it tries to detects cases where get_frame_info() wrongly consider nested function as a leaf one. It also pass 'unsinged long *sp' instead of 'unsigned long **sp' as second parameter. The code looks cleaner. Signed-off-by:
Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by:
-
Franck Bui-Huu authored
Now get_frame_info() wants to detect move sp instruction first. It assumes that the save ra in the stack instruction can't happen before allocating frame size space into the stack. Signed-off-by:
-
Franck Bui-Huu authored
Make dump_stack() code not depend on CONFIG_KALLSYMS. It also make prepare_frametrace() always inlined to get less false entries reported by show_raw_backtrace(). Signed-off-by:
-
Franck Bui-Huu authored
Signed-off-by:
-
Franck Bui-Huu authored
We usually use backtrace term for dumping a call tree during debug. Therefore this patch renames show_frametrace() into show_backtrace() and show_trace() into show_raw_backtrace(). It also uses the new function print_ip_sym(). Signed-off-by:
-
Franck Bui-Huu authored
Signed-off-by:
-
Franck Bui-Huu authored
Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Peter Watkins authored
Signed-off-by: -
Atsushi Nemoto authored
Instead of dump all possible address in the stack, unwind the stack frame based on prologue code analysis, as like as get_wchan() does. While the code analysis might fail for some reason, there is a new kernel option "raw_show_trace" to disable this feature. Signed-off-by:
-
Yoichi Yuasa authored
CONFIG_WM97XX_COMODULE doesn't exist. Signed-off-by:
-
Atsushi Nemoto authored
Print call-trace in show_stack() (like on other archs). Also make show_trace() static and simplify its argument list. Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
-
Yoichi Yuasa authored
Signed-off-by:
-
Maxime Bizon authored
Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
-
- 26 Sep, 2006 4 commits
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits) [PATCH] Don't set calgary iommu as default y [PATCH] i386/x86-64: New Intel feature flags [PATCH] x86: Add a cumulative thermal throttle event counter. [PATCH] i386: Make the jiffies compares use the 64bit safe macros. [PATCH] x86: Refactor thermal throttle processing [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64) [PATCH] Fix unwinder warning in traps.c [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1 [PATCH] x86: Move direct PCI scanning functions out of line [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI [PATCH] Don't leak NT bit into next task [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder [PATCH] Fix some broken white space in ia32_signal.c [PATCH] Initialize argument registers for 32bit signal handlers. [PATCH] Remove all traces of signal number conversion [PATCH] Don't synchronize time reading on single core AMD systems [PATCH] Remove outdated comment in x86-64 mmconfig code [PATCH] Use string instructions for Core2 copy/clear [PATCH] x86: - restore i8259A eoi status on resume [PATCH] i386: Split multi-line printk in oops output. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits) Driver core: Don't call put methods while holding a spinlock Driver core: Remove unneeded routines from driver core Driver core: Fix potential deadlock in driver core PCI: enable driver multi-threaded probe Driver Core: add ability for drivers to do a threaded probe sysfs: add proper sysfs_init() prototype drivers/base: check errors drivers/base: Platform notify needs to occur before drivers attach to the device v4l-dev2: handle __must_check add CONFIG_ENABLE_MUST_CHECK add __must_check to device management code Driver core: fixed add_bind_files() definition Driver core: fix comments in drivers/base/power/resume.c sysfs_remove_bin_file: no return value, dump_stack on error kobject: must_check fixes Driver core: add ability for devices to create and remove bin files Class: add support for class interfaces for devices Driver core: create devices/virtual/ tree Driver core: add device_rename function Driver core: add ability for classes to handle devices properly ...
-
Heiko Carstens authored
Convert cmm's usage of kernel_thread to kthread_run. Also create the cmmthread at module load time, so it is possible to check if creation of the thread fails. In addition the cmmthread now gets terminated when the module gets unloaded instead of leaving a stale kernel thread. Also check the return values of other registration functions at module load and handle their return values appropriately. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Include the host architecture's ptrace-abi.h instead of ptrace.h. There was some cpp mangling of names around the ptrace.h include to avoid symbol clashes between UML and the host architecture. Most of these can go away. The exception is struct pt_regs, which is convenient to have in userspace, but must be renamed in order that UML can define its own. ptrace-x86_64.h needed to have some now-obsolete cpp cruft and a declaration removed. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
