Recently we started using ipmr with thousands of entries and easily hit
soft lockups on smaller devices. The reason is that the hash function
uses the high order bits from the src and dst, but those don't change in
many common cases, also the hash table  is only 64 elements so with
thousands it doesn't scale at all.
This patch migrates the hash table to rhashtable, and in particular the
rhl interface which allows for duplicate elements to be chained because
of the MFC_PROXY support (*,G; *,*,oif cases) which allows for multiple
duplicate entries to be added with different interfaces (IMO wrong, but
it's been in for a long time).

And here are some results from tests I've run in a VM:
 mr_table size (default, allocated for all namespaces):
  Before                    After
   49304 bytes               2400 bytes

 Add 65000 routes (the diff is much larger on smaller devices):
  Before                    After
   1m42s                     58s

 Forwarding 256 byte packets with 65000 routes (test done in a VM):
  Before                    After
   3 Mbps / ~1465 pps        122 Mbps / ~59000 pps

As a bonus we no longer see the soft lockups on smaller devices which
showed up even with 2000 entries before.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes following warnings :

net/core/secure_seq.c:125:28: warning: incorrect type in argument 1
(different base types)
net/core/secure_seq.c:125:28:    expected unsigned int const [unsigned]
[usertype] a
net/core/secure_seq.c:125:28:    got restricted __be32 [usertype] saddr
net/core/secure_seq.c:125:35: warning: incorrect type in argument 2
(different base types)
net/core/secure_seq.c:125:35:    expected unsigned int const [unsigned]
[usertype] b
net/core/secure_seq.c:125:35:    got restricted __be32 [usertype] daddr
net/core/secure_seq.c:125:43: warning: cast from restricted __be16
net/core/secure_seq.c:125:61: warning: restricted __be16 degrades to
integer

Fixes: 7cd23e53 ("secure_seq: use SipHash in place of MD5")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reduce the load time of the VF driver by decreasing the wait time between
iterations of the loop that polls for a mailbox response from the PF. Also
change the wait time units from jiffies to milliseconds.
Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove code that's no longer needed.  It used to serve a purpose, which was
to fix a link-related bug.  For a while now, the NIC firmware has had a
more elegant fix for that bug.
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit bc1f4470 ("net: make ndo_get_stats64 a void function")
mistakenly used a return value for this void conversion.

Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
cc: stephen hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: mdio-gpio: Use modern GPIO helpers

This patch series modernizes the mdio-gpio and makes it switch to the
latest and greatest API for manipulating GPIO lines, thus allowing
some simplifications in the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

gpiod functions support handling low-active pins, so we can move
thos code out of this driver into the gpio subsystem and simplify
the code a bit.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using gpiod functions lets us use functionality which is not available
with gpio functions.

There is no gpiod function to match devm_gpio_request_one, so leave it
in place and use gpio_to_desc() to convert absolute pin numbers to gpio
descriptors.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using devm_gpio_request_one lets us request gpio pins with initial state
in one go.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/usb/cdc_ether.c:469:6: warning:
 symbol 'usbnet_cdc_zte_status' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The filter added by sock_setfilter is intended to only permit
packets matching the pattern set up by create_payload(), but
we only check the ip_len, and a single test-character in
the IP packet to ensure this condition.

Harden the filter by adding additional constraints so that we only
permit UDP/IPv4 packets that meet the ip_len and test-character
requirements. Include the bpf_asm src as a comment, in case this
needs to be enhanced in the future
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

net/core/lwt_bpf.c:355:5: warning:
 symbol 'bpf_lwt_prog_cmp' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
s390: qeth patches

yesterday I came up with 13 qeth patches. Since you have not been
happy with the 13th patch, I want to make sure that at least the
remaining 12 qeth patches can be applied to net-next. Here is the
resend of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth devices in layer3 mode need a separate handling of vipa and proxy-arp
addresses. vipa and proxy-arp addresses processed by qeth can be read from
userspace. Introduced with commit 5f78e29c ("qeth: optimize IP handling
in rx_mode callback") the retrieval of vipa and proxy-arp addresses is
broken, if more than one vipa or proxy-arp address are set.

The qeth code used local variable "int i" for 2 different purposes. This
patch now spends 2 separate local variables of type "int".
While touching these functions hash_for_each_safe() is converted to
hash_for_each(), since there is no removal of hash entries.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reference-ID: RQM 3524
Signed-off-by: David S. Miller <davem@davemloft.net>

STARTLAN needs to be the first IPA command after MPC initialization
completes.
So move the qeth_send_startlan() call from the layer disciplines
into the core path, right after the MPC handshake.
While at it, replace the magic LAN OFFLINE return code
with the existing enum.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move all MAC utility functions in one place, and drop the
forward declarations.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This matches qeth_l2_write_mac().
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consolidate errno handling for MAC management: Instead of doing this in every
caller, do it in one place.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Suggested-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_l2_send_groupmac() already translates the return code, so
calling qeth_setdel_makerc() a second time only produces garbage.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only caller passes del = 0, so remove both the parameter and
the code that handles != 0.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unused define QETH_IP_HEADER_SIZE.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Accessing the current hsuid via card->options.hsuid is perfectly
fine, even when the card is DOWN.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RX/TX checksum offloading is turned on and the adapter is
an OSA 3 card in layer 3 mode, the checksum offloading is only
performed when both peers use different adapters. If both peers
share an OSA 3 card, communication is a memory copy and
checksum offloading is not performed.

This patch adds a warning to inform the administrator.

OSA 3 in layer 2 mode does not offer the RX/TX checksum
offload feature.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Turning on receive and/or transmit checksum offload support
on the OSA card requires 2 commands:
1. start command which replies with available features
2. enable command to turn on selected features.

The current version does not check the reply of the start
command and simply uses the returned value to enable
offload features. When the start command returns zero, this
leads to a situation where no checksum offload
is turned on by the hardware. Even worse no error
indication is returned. The Linux kernel assumes
the OSA card performs RX/TX checksum offload, but the hardware
does not perform any checksum verification at all.

This patch checks the return of the start and enable
command responses from the hardware and turns off
checksum offloading if the commands fails or does not
respond with the correct bit setting.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rework the RX/TX checksum offloading command sequence to use
the provided function call back mechanims to return card
data to the device driver.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
More flexible BPF cb access

This patch improves BPF's cb access by allowing b/h/w/dw
access variants on it. For details, please see individual
patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When structs are used to store temporary state in cb[] buffer that is
used with programs and among tail calls, then the generated code will
not always access the buffer in bpf_w chunks. We can ease programming
of it and let this act more natural by allowing for aligned b/h/w/dw
sized access for cb[] ctx member. Various test cases are attached as
well for the selftest suite. Potentially, this can also be reused for
other program types to pass data around.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when calling convert_ctx_access() callback for the various
program types, we pass in insn->dst_reg, insn->src_reg, insn->off from
the original instruction. This information is needed to rewrite the
instruction that is based on the user ctx structure into a kernel
representation for the ctx. As we'd like to allow access size beyond
just BPF_W, we'd need also insn->code for that in order to decode the
original access size. Given that, lets just pass insn directly to the
convert_ctx_access() callback and work on that to not clutter the
callback with even more arguments we need to pass when everything is
already contained in insn. So lets go through that once, no functional
change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fix typo and clc-bug

I received 2 bug reports for my new AF_SMC-code. Here are the fixes for them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating an SMC connection, there is a CLC (connection layer control)
handshake to prepare for RDMA traffic. The corresponding code is part of
commit 0cfdd8f9 ("smc: connection and link group creation").
Mac addresses to be exchanged in the handshake are copied with a wrong
length of 12 instead of 6 bytes. Following code overwrites the wrongly
copied code, but nevertheless the correct length should already be used for
the preceding mac address copying. Use ETH_ALEN for the memcpy length with
mac addresses.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Fixes: 0cfdd8f9 ("smc: connection and link group creation")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When introducing the new socket family AF_SMC in
commit ac713874 ("smc: establish new socket family"),
a typo in af_family_clock_key_strings has slipped in.
This patch repairs it.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Fixes: ac713874 ("smc: establish new socket family")
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize mbox lock and list for mgmt dev to avoid NULL pointer
dereference when cxgb_set_vf_mac is called.

And also allocate memory for private data while allocating mgmt
netdev.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netif_wake_subqueue() is duplicating the same thing that netif_tx_wake_queue()
does, so make it call it directly after looking up the queue from the index.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

>From struct ethtool_ops:

        int     (*set_rxfh)(struct net_device *, const u32 *indir,
                            const u8 *key, const u8 hfunc);

Change function arg of hfunc to const type.

V2: Fixed indentation.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 712c3185 ("net: thunderx: Program LMAC credits based on MTU")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/sfc/efx.c:2337:5: warning:
 symbol 'efx_get_phys_port_id' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two AF_* families adding entries to the lockdep tables
at the same time.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge fixes from Andrew Morton:
 "27 fixes.

  There are three patches that aren't actually fixes. They're simple
  function renamings which are nice-to-have in mainline as ongoing net
  development depends on them."

* akpm: (27 commits)
  timerfd: export defines to userspace
  mm/hugetlb.c: fix reservation race when freeing surplus pages
  mm/slab.c: fix SLAB freelist randomization duplicate entries
  zram: support BDI_CAP_STABLE_WRITES
  zram: revalidate disk under init_lock
  mm: support anonymous stable page
  mm: add documentation for page fragment APIs
  mm: rename __page_frag functions to __page_frag_cache, drop order from drain
  mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free
  mm, memcg: fix the active list aging for lowmem requests when memcg is enabled
  mm: don't dereference struct page fields of invalid pages
  mailmap: add codeaurora.org names for nameless email commits
  signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
  mm: pmd dirty emulation in page fault handler
  ipc/sem.c: fix incorrect sem_lock pairing
  lib/Kconfig.debug: fix frv build failure
  mm: get rid of __GFP_OTHER_NODE
  mm: fix remote numa hits statistics
  mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
  ocfs2: fix crash caused by stale lvb with fsdlm plugin
  ...

Pull networking fixes from David Miller:

 1) Fix rtlwifi crash, from Larry Finger.

 2) Memory disclosure in appletalk ipddp routing code, from Vlad
    Tsyrklevich.

 3) r8152 can erroneously split an RX packet into multiple URBs if the
    Rx FIFO is not empty when we suspend. Fix this by waiting for the
    FIFO to empty before suspending. From Hayes Wang.

 4) Two GRO fixes (enter slow path when not enough SKB tail room exists,
    disable frag0 optimizations when there are IPV6 extension headers)
    from Eric Dumazet and Herbert Xu.

 5) A series of mlx5e bug fixes (do source udp port offloading for
    tunnels properly, Ip fragment matching fixes, handling firmware
    errors properly when installing TC rules, etc.) from Saeed Mahameed,
    Or Gerlitz, Roi Dayan, Hadar Hen Zion, Gil Rockah, and Daniel
    Jurgens.

 6) Two VRF fixes from David Ahern (don't skip multipath selection for
    VRF paths, disallow VRF to be configured with table ID 0).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  net: vrf: do not allow table id 0
  net: phy: marvell: fix Marvell 88E1512 used in SGMII mode
  sctp: Fix spelling mistake: "Atempt" -> "Attempt"
  net: ipv4: Fix multipath selection with vrf
  cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig
  gro: use min_t() in skb_gro_reset_offset()
  net/mlx5: Only cancel recovery work when cleaning up device
  net/mlx5e: Remove WARN_ONCE from adaptive moderation code
  net/mlx5e: Un-register uplink representor on nic_disable
  net/mlx5e: Properly handle FW errors while adding TC rules
  net/mlx5e: Fix kbuild warnings for uninitialized parameters
  net/mlx5e: Set inline mode requirements for matching on IP fragments
  net/mlx5e: Properly get address type of encapsulation IP headers
  net/mlx5e: TC ipv4 tunnel encap offload error flow fixes
  net/mlx5e: Warn when rejecting offload attempts of IP tunnels
  net/mlx5e: Properly handle offloading of source udp port for IP tunnels
  gro: Disable frag0 optimization on IPv6 ext headers
  gro: Enter slow-path if there is no tailroom
  mlx4: Return EOPNOTSUPP instead of ENOTSUPP
  net/af_iucv: don't use paged skbs for TX on HiperSockets
  ...

Pull crypto fix from Herbert Xu:
 "This fixes a regression in aesni that renders it useless if it's
  built-in with a modular pcbc configuration"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni - Fix failure when built-in with modular pcbc