Move the boiler plate structures and helper functions we recently
added into their own header file, so that the complete collection is
located together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Use an i40e_stats array to handle the queue stats, instead of coding
similar functionality separately. Because of how the queue stats are
accessed on some kernels, we can't easily use i40e_add_ethtool_stats.

Instead, implement a separate helper, i40e_add_queue_stats, which we'll
use instead. This helper will correctly implement the
u64_stats_fetch_begin_irq logic and allow retries until successful. We
share the most complex code by re-using i40e_add_one_ethtool_stat.

This logic additionally easily supports skipping disabled rings by using
a ternary operator before calling the u64_stats_fetch_begin_irq()
function, so that we correctly zero-out the stats values without having
to perform two separate sections of code.

This significantly reduces the boiler plate code in
i40e_get_ethtool_stats, and helps keep the complex logic contained to as
few functions as possible.

With this patch, we've finally converted all the statistics to use the
helpers and the i40e_stats function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge tag 'mac80211-next-for-davem-2018-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Only a few changes at this point:
 * new channels in 60 GHz
 * clarify (average) ACK signal reporting API
 * expose ieee80211_send_layer2_update() for all drivers
 * start/stop mac80211's TXQs properly when required
 * avoid regulatory restore with IE ignoring
 * spelling: contidion -> condition
 * fully implement WFA Multi-AP backhaul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan_find_mac() unconditionally set f->used for every packet,
this causes a cache miss for every packet, since remote, hlist
and used of vxlan_fdb share the same cache line, which are
accessed when send every packets.

so f->used is set only if not equal to jiffies, to reduce dirty
cache line times, this gives 3% speed-up with small packets.
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Weilin Chang says:

====================
liquidio: improve soft command/response handling

Change soft command handling to fix the possible race condition when the
process handles a response of a soft command that was already freed by an
application which got timeout for this request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Remove unused functions and data structures.
2. Change the sending of the remaining soft commands to synchronous.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Change struct octnic_ctrl_pkt to support synchronous operation.
2. Change code which use structure octnic_ctrl_pkt to send sc's
   synchronously.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Add wait_for_sc_completion_timeout() for waiting the response and
   handling common response errors
2. Send sc's synchronously: remove unused callback function,
   and context structure; use wait_for_sc_completion_timeout() to wait
   its response.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Set LIO_SC_MAX_TMO_MS as the maximum timeout value for a soft command
   (sc).  All sc's use this value as a hard timeout value. Add expiry_time
   in struct octeon_soft_command to keep the hard timeout value. The field
   wait_time and timeout in struct octeon_soft_command will be obsoleted in
   the last patch of this patch series.
2. Add processing a synchronous sc in sc response thread
   lio_process_ordered_list. The memory allocated for a synchronous sc will
   be freed by lio_process_ordered_list() to the sc pool.
3. Add two response lists for lio_process_ordered_list to process the
   storage allocated for sc's:
   OCTEON_DONE_SC_LIST response list keeps all sc's which will be freed to
   the pool after their requestors have finished processing the responses.
   OCTEON_ZOMBIE_SC_LIST response list keeps all sc's which have got
   LIO_SC_MAX_TMO_MS timeout.
   When an sc gets a hard timeout, lio_process_order_list() will recheck
   its status 1 ms later. If the status has not updated by the firmware at
   that time, the sc will be removed from OCTEON_DONE_SC_LIST response list
   to OCTEON_ZOMBIE_SC_LIST response list. The sc's in the
   OCTEON_ZOMBIE_SC_LIST response list will be freed when the driver is
   unloaded.
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

decrypt_skb fails if the number of sg elements required to map it
is greater than MAX_SKB_FRAGS. nsg must always be calculated, but
skb_cow_data adds unnecessary memcpy's for the zerocopy case.

The new function skb_nsg calculates the number of scatterlist elements
required to map the skb without the extra overhead of skb_cow_data.
This patch reduces memcpy by 50% on my encrypted NBD benchmarks.
Reported-by: Vakul Garg <Vakul.garg@nxp.com>
Reviewed-by: Vakul Garg <Vakul.garg@nxp.com>
Tested-by: Vakul Garg <Vakul.garg@nxp.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 64-bit platforms to driver.

The hardware only supports 32-bit register accesses
so the accesses need to be split up into two writes
when setting the current and tail descriptor values.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This test creates a raw IPv4 socket, fragments a largish UDP
datagram and sends the fragments out of order.

Then repeats in a loop with different message and fragment lengths.

Then does the same with overlapping fragments (with overlapping
fragments the expectation is that the recv times out).

Tested:

root@<host># time ./ip_defrag.sh
ipv4 defrag
PASS
ipv4 defrag with overlaps
PASS

real    1m7.679s
user    0m0.628s
sys     0m2.242s

A similar test for IPv6 is to follow.
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current behavior of IP defragmentation is inconsistent:
- some overlapping/wrong length fragments are dropped without
  affecting the queue;
- most overlapping fragments cause the whole frag queue to be dropped.

This patch brings consistency: if a bad fragment is detected,
the whole frag queue is dropped. Two major benefits:
- fail fast: corrupted frag queues are cleared immediately, instead of
  by timeout;
- testing of overlapping fragments is now much easier: any kind of
  random fragment length mutation now leads to the frag queue being
  discarded (IP packet dropped); before this patch, some overlaps were
  "corrected", with tests not seeing expected packet drops.

Note that in one case (see "if (end&7)" conditional) the current
behavior is preserved as there are concerns that this could be
legitimate padding.
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In lio_enable_irq, the pkt_in_done count register was being cleared to
zero.  However, there could be some completed instructions which were not
yet processed due to budget and limit constraints.
So, only write this register with the number of actual completions
that were processed.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
ethtool: drop get_settings and set_settings ops

As Andrew Lunn pointed out in recent discussion, there is only one in tree
driver left which still defines deprecated callbacks get_settings() and
set_settings() in ethtool_ops. First patch converts this driver to
get_link_ksettings() and set_link_ksettings(). Second patch then removes
the deprecated callbacks from struct ethtool_ops and ethtool code which
falls back to them.

This doesn't break old versions of ethtool or any other userspace code
using ETHTOOL_{G,S}SET. We still implement both (old) ETHTOOL_{G,S}SET and
(new) ETHTOOL_{G,S}LINKSETTINGS ioctl commands but after this series both
will be implemented only using {g,s}et_link_ksettings(). The only affected
code would be out of tree NIC drivers which have not been converted yet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since [gs]et_settings ethtool_ops callbacks have been deprecated in
February 2016, all in tree NIC drivers have been converted to provide
[gs]et_link_ksettings() and out of tree drivers have had enough time to do
the same.

Drop get_settings() and set_settings() and implement both ETHTOOL_[GS]SET
and ETHTOOL_[GS]LINKSETTINGS only using [gs]et_link_ksettings().
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the last in-tree driver using the old {get,set}_settings API.

Note: this is only build tested. I don't have the hardware at hand; as it's
10Mb/s half duplex device and driver can be built only for one subplatform
of 32-bit ARM (Acorn RiscPC), it may be difficult to find someone who does.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

This gets rid of the licence boilerblate in favor of SPDX identifier
which only takes a single line comment.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genl_err_attr() sets netlink_ext_ack::bad_attr which is a pointer to const
struct nlattr so make the attr argument also const.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <john@phrozen.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Nelson Chang <nelson.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the API to include all ACK frames in average ACK
signal strength reporting, not just ACKs for data frames.
Make exposing the data conditional on implementing the
extended feature flag.

This is how it was really implemented in mac80211, update
the code there to use the new defines and clean up some of
the setting code.

Keep nl80211.h source compatibility by keeping the old names.
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
[rewrite commit log, change compatibility to be old=new
 instead of the other way around, update kernel-doc,
 roll in mac80211 changes, make mac80211 depend on valid
 bit instead of HW flag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The current mac80211 WDS (4-address mode) can be used to cover most of the
Multi-AP requirements for Data frames per the WFA Multi-AP Specification v1.0.
When configuring AP/STA interfaces in 4-address mode, they are able to function
as fronthaul AP/backhaul STA of Multi-AP device complying below
Tx, Rx requirements except one missing STA Rx requirement added by this patch.

Multi-AP specification section 14.1 describes the following requirements:

Transmitter requirements
------------------------
1. Fronthaul AP
        i) When DA!=RA of backhaul STA, must use 4-address format
        ii) When DA==RA of backhaul STA, shall use either 3-address
            or 4-address format with RA updated with STA MAC

            (mac80211 support 4-address format via AP/VLAN interface)

2. Backhaul STA
        i) When SA!=TA of backhaul STA, must use 4-address format
        ii) When SA==TA of backhaul STA, shall use either 3-address
            or 4-address format with RA updated with AP MAC

            (mac80211 support 4-address format via use_4addr)

Receiver requirements
---------------------
1. Fronthaul AP
        i) When SA!=TA of backhaul STA, must support receiving 4-address
           format frames
        ii) When SA==TA of backhaul STA, must support receiving both
            3-address and 4-address format frames

            (mac80211 support both 3-addr & 4-addr via AP/VLAN interface)

2. Backhaul STA
        i) When DA!=RA of backhaul STA, must support receiving 4-address
           format frames
        ii) When DA==RA of backhaul STA,  must support receiving both
            3-address and 4-address format frames

            (mac80211 support only receiving 4-address format via
             use_4addr)

This patch addresses the above Rx requirement (ii) for backhaul STA to receive
unicast (DA==RA) 3-address frames in addition to 4-address frames.

The current design doesn't accept 3-address frames when configured in 4-address
mode (use_4addr). Hence add a check to allow 3-address frames when DA==RA of
backhaul STA (adhering to Table 9-26 of IEEE Std 802.11™-2016).

This case was tested with a bridged station interface when associated with
a non-mac80211 based vendor AP implementation using 3-address frames for WDS.

STA was able to support the Multi-AP Rx requirement when DA==RA. No issues,
no loops seen when tested with mac80211 based AP as well.

Verified and confirmed all other Tx and Rx requirements of AP and STA for
Multi-AP respectively. They all work using the current mac80211-WDS design.
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Jakub Kicinski says:

====================
nfp: add NFP5000 support

This series broadly speaking adds support for NFP5000 and
related products.

First we add support for loading FW from flash.  We need to allow
for the management processor to provide extended log messages when
FW is loaded.  This is needed when FW selection policy is to compare
the FW on the disk and in the flash, and load the newer.  User should
be told what FW was selected.

We use this opportunity to add extended errors for normal FW loading
as well.

Next we add support for requesting HW information from the management
processor.  Up until now the driver read the HWinfo as it appears in
card memory, but there can be cases when management processor has
additional information or generates the entries dynamically so
occasionally we will have to consult it.  We use this to look up MAC
addresses for PCIe netdevs.

Next the actual patch with NFP5000 support and a small dose of
refactoring of PCIe init.

The remaining patches add support for reading RTsymbol types we
didn't need before.  Ones explicitly placed in external memory unit's
cache and absolute ones.

This part begins with a patch moving the logic which figures out
the correct bit offsets to device probe, to avoid redoing the
calculation for each access.  Second patch adds error messages
for easier troubleshooting.  Next patch adds helpers which will
take care of address conversions to reach into EMU cache.
Subsequently users are migrated from the raw CPP API to the new RTsym
helpers.  Finally we add support for reading absolute symbols.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the RTsym users access the size via the helper, which
takes care of special handling of absolute symbols.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support in nfpcore for reading the absolute RTsyms.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all users of RTsym to the new set of helpers which
handle all targets correctly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make nfp_rtsym_{read,write}_le() and nfp_rtsym_map() use the new
target resolution helpers to allow accessing in-cache symbols.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Align nfp_cpp_map_area() with other CPP-level APIs and pass
encoded cpp_id/dest rather than target, action, domain tuple.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RTsyms may have special encodings for more complex symbol types.
For example symbols which are placed in external memory unit's
cache directly, constants or local memory.  Add set of helpers
which will check for those special encodings and handle them
correctly.

For now only add direct cache accesses, we don't have a need to
access the other ones in foreseeable future.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add error prints to CPP target encoding/decoding logic, otherwise
it's quite hard to pin point the reasons why read or write
operations fail.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon need the MU locality field offset much more
often than just for decoding MIP address.  Save it in nfp_cpp
for quick access.  Note that we can already reuse the target
config from nfp_cpp, no need to do the XPB read.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a switch statement instead of ifs for code dependent
on chip version.  While at it make sure we fail for unknown
chip revisions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add NFP5000 to supported chips, the chip is backward compatible
with NFP4000 and NFP6000, so core PCIe code needs to handle it
the same way as 4k and 6k.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In multi-host scenarios Management FW may allocate MAC addresses
at runtime, we have to use the indirect lookup to find them.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Management FW can adjust some of the information in the HWinfo table
at runtime.  In some cases reading the table directly will not yield
correct results.  Add a NSP command for looking up information.
Up until now we weren't making use of any of the values which may
get adjusted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To enable easier FW distribution NFP can now automatically
select between FW stored on the flash and loaded from the
kernel.

If FW loading policy is set to auto it will compare the
versions of FW from the host and from the flash and load
the newer one.  If FW type doesn't match (e.g. one advanced
application vs another) the FW from the host takes precedence,
unless one of them is the basic NIC firmware, in which case
the non-basic-NIC FW is selected.

This automatic selection mechanism requires we inform user
what the verdict was.  Print a message to the logs explaining
the decision and the reason.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flash may contain a default NFP application FW.  This application
can either be put there by the user (with ethtool -f) or shipped
with the card.  If file system FW is not found, attempt to load
this flash stored app FW.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is already a fair number of arguments to nfp_nsp_command()
family of functions.  Encapsulate them into structures to make
adding new ones easier.  No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>