- 20 Mar, 2013 40 commits
-
-
Chris Metcalf authored
Previously, if you did an "ifconfig down" or similar on one core, and the kernel had CONFIG_XFRM enabled, every core would be interrupted to check its percpu flow list for items that could be garbage collected. With this change, we generate a mask of cores that actually have any percpu items, and only interrupt those cores. When we are trying to isolate a set of cpus from interrupts, this is important to do. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Revised bnx2x implementation of PCI Express Advanced Error Recovery - stop and free driver resources according to the AER flow (instead of the currently implemented `hope-for-the-best' release approach), and do not make any assumptions on the HW state after slot reset. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
-
Wei Yongjun authored
fec_poll_controller() was not declared. It should be static. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
emac_poll_controller() was not declared. It should be static. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Sachin Kamat authored
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: David Daney <ddaney@caviumnetworks.com> Acked-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
Sachin Kamat authored
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by:
-
Sachin Kamat authored
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by:
-
Sachin Kamat authored
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by:
-
Sachin Kamat authored
module_platform_driver macro removes some boilerplate and simplifies the code. Signed-off-by:
-
Jesper Derehag authored
Process connector can now also detect coredumping events. Main aim of patch is get notified at start of coredumping, instead of having to wait for it to finish and then being notified through EXIT event. Could be used for instance by process-managers that want to get notified as soon as possible about process failures, and not necessarily beeing notified after coredump, which could be in the order of minutes depending on size of coredump, piping and so on. Signed-off-by:
Jesper Derehag <jderehag@hotmail.com> Signed-off-by:
-
Claudiu Manoil authored
The only place where gfar_configure_coalescing is called with an actual bitmask (other than 0xff) is in gfar_poll (on the hot path). So make gfar_configure_coalescing() static for the buffer processing path, and export gfar_configure_coalescing_all() for the remaining cases that require to set coalescing for all the queues at once (on the slow path). Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
For Multi Q Multi Group (MQ_MG_MODE) mode, the Rx/Tx colescing registers [rt]xic are aliased with the [rt]xic0 registers (coalescing setting regs for Q0). This avoids programming twice in a row the coalescing registers for the Rx/Tx hw Q0. Signed-off-by:
-
Claudiu Manoil authored
Split the napi budget fairly among the active queues only, instead of dividing it by the total number of Rx queues assigned to the given interrupt group. Use the h/w indication field RXFi in rstat (receive status register) to identify the active rx queues from the current interrupt group (i.e. receive event occured on ring i, if ring i is part of the current interrupt group). This indication field in rstat, RXFi i=0..7, allows us to find out on which queues of the same interrupt group do we have incomming traffic once we entered the polling routine for the given interrupt group. After servicing the ring i, the corresponding bit RXFi will be written with 1 to clear the active queue indication for that ring. Signed-off-by:
-
Claudiu Manoil authored
There are 2 issues with the current napi poll routine, with regards to tx ring cleanup: 1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map, which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map" holds a different value than rx_bit_map, the current polling routine will service the wrong Tx queues in this case (i.e. the interrupt group will receive interrupts from tx queues that it will not service) 2) Tx cleanup completion consumes napi budget, whereas the napi budget should be reserved for Rx work only. The patch fixes these issues and provides a clean napi polling routine. Napi poll completion is reached when all the Rx queues have been serviced and there is no Tx work to do. Signed-off-by:
-
Daniel Borkmann authored
It is very useful to do dynamic truncation of packets. In particular, we're interested to push the necessary header bytes to the user space and cut off user payload that should probably not be transferred for some reasons (e.g. privacy, speed, or others). With the ancillary extension PAY_OFFSET, we can load it into the accumulator, and return it. E.g. in bpfc syntax ... ld #poff ; { 0x20, 0, 0, 0xfffff034 }, ret a ; { 0x16, 0, 0, 0x00000000 }, ... as a filter will accomplish this without having to do a big hackery in a BPF filter itself. Follow-up JIT implementations are welcome. Thanks to Eric Dumazet for suggesting and discussing this during the Netfilter Workshop in Copenhagen. Suggested-by:Eric Dumazet <edumazet@google.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
-
Daniel Borkmann authored
__skb_get_poff() returns the offset to the payload as far as it could be dissected. The main user is currently BPF, so that we can dynamically truncate packets without needing to push actual payload to the user space and instead can analyze headers only. Suggested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: -
Willem de Bruijn authored
Fix flaky results with PACKET_FANOUT_HASH depending on whether the two flows hash into the same packet socket or not. Also adds tests for PACKET_FANOUT_LB and PACKET_FANOUT_CPU and replaces the counting method with a packet ring. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Fabio Estevam authored
Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Kees Cook authored
This makes sure that release_sock is called for all error conditions in irda_getsockopt. Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by:
-
Sergei Shtylyov authored
One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by:
-
Martin Fuzzey authored
When using ipconfig the logs currently look like: Single name server: [ 3.467270] IP-Config: Complete: [ 3.470613] device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1 [ 3.480670] host=infigo-1, domain=, nis-domain=(none) [ 3.486166] bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath= [ 3.492910] nameserver0=172.16.42.1[ 3.496853] ALSA device list: Three name servers: [ 3.496949] IP-Config: Complete: [ 3.500293] device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1 [ 3.510367] host=infigo-1, domain=, nis-domain=(none) [ 3.515864] bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath= [ 3.522635] nameserver0=172.16.42.1, nameserver1=172.16.42.100 [ 3.529149] , nameserver2=172.16.42.200 Fix newline handling for these cases Signed-off-by:
Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Daniel Borkmann authored
In skb_flow_dissect(), we perform a dissection of a skbuff. Since we're doing the work here anyway, also store thoff for a later usage, e.g. in the BPF filter. Suggested-by:
-
David S. Miller authored
Tom Parkin says: ==================== This l2tp bugfix patchset addresses a number of issues. The first five patches in the series prevent l2tp sessions pinning an l2tp tunnel open. This occurs because the l2tp tunnel is torn down in the tunnel socket destructor, but each session holds a tunnel socket reference which prevents tunnels with sessions being deleted. The solution I've implemented here involves adding a .destroy hook to udp code, as discussed previously on netdev[1]. The subsequent seven patches address futher bugs exposed by fixing the problem above, or exposed through stress testing the implementation above. Patch 11 (avoid deadlock in l2tp stats update) isn't directly related to tunnel/session lifetimes, but it does prevent deadlocks on i386 kernels running on 64 bit hardware. This patchset has been tested on 32 and 64 bit preempt/non-preempt kernels, using iproute2, openl2tp, and custom-made stress test code. [1] http://comments.gmane.org/gmane.linux.network/259169 ==================== Signed-off-by:
-
Tom Parkin authored
If we postpone unhashing of l2tp sessions until the structure is freed, we risk: 1. further packets arriving and getting queued while the pseudowire is being closed down 2. the recv path hitting "scheduling while atomic" errors in the case that recv drops the last reference to a session and calls l2tp_session_free while in atomic context As such, l2tp sessions should be unhashed from l2tp_core data structures early in the teardown process prior to calling pseudowire close. For pseudowires like l2tp_ppp which have multiple shutdown codepaths, provide an unhash hook. Signed-off-by:Tom Parkin <tparkin@katalix.com> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Tom Parkin authored
l2tp's u64_stats writers were incorrectly synchronised, making it possible to deadlock a 64bit machine running a 32bit kernel simply by sending the l2tp code netlink commands while passing data through l2tp sessions. Previous discussion on netdev determined that alternative solutions such as spinlock writer synchronisation or per-cpu data would bring unjustified overhead, given that most users interested in high volume traffic will likely be running 64bit kernels on 64bit hardware. As such, this patch replaces l2tp's use of u64_stats with atomic_long_t, thereby avoiding the deadlock. Ref: http://marc.info/?l=linux-netdev&m=134029167910731&w=2 http://marc.info/?l=linux-netdev&m=134079868111131&w=2Signed-off-by:
-
Tom Parkin authored
If userspace deletes a ppp pseudowire using the netlink API, either by directly deleting the session or by deleting the tunnel that contains the session, we need to tear down the corresponding pppox channel. Rather than trying to manage two pppox unbind codepaths, switch the netlink and l2tp_core session_close handlers to close via. the l2tp_ppp socket .release handler. Signed-off-by:
-
Tom Parkin authored
Add calls to l2tp_session_queue_purge as a part of l2tp_tunnel_closeall and l2tp_session_delete. Pseudowire implementations which are deleted only via. l2tp_core l2tp_session_delete calls can dispense with their own code for flushing the reorder queue. Signed-off-by:
-
Tom Parkin authored
If an l2tp session is deleted, it is necessary to delete skbs in-flight on the session's reorder queue before taking it down. Rather than having each pseudowire implementation reaching into the l2tp_session struct to handle this itself, provide a function in l2tp_core to purge the session queue. Signed-off-by:
-
Tom Parkin authored
It is valid for an existing struct sock object to have a NULL sk_socket pointer, so don't BUG_ON in l2tp_tunnel_del_work if that should occur. Signed-off-by:
-
Tom Parkin authored
When looking up the tunnel socket in struct l2tp_tunnel, hold a reference whether the socket was created by the kernel or by userspace. Signed-off-by:
-
Tom Parkin authored
When a user deletes a tunnel using netlink, all the sessions in the tunnel should also be deleted. Since running sessions will pin the tunnel socket with the references they hold, have the l2tp_tunnel_delete close all sessions in a tunnel before finally closing the tunnel socket. Signed-off-by:
-
Tom Parkin authored
l2tp_core hooks UDP's .destroy handler to gain advance warning of a tunnel socket being closed from userspace. We need to do the same thing for IP-encapsulation sockets. Signed-off-by:
-
Tom Parkin authored
l2tp_core internally uses l2tp_tunnel_closeall to close all sessions in a tunnel when a UDP-encapsulation socket is destroyed. We need to do something similar for IP-encapsulation sockets. Export l2tp_tunnel_closeall as a GPL symbol to enable l2tp_ip and l2tp_ip6 to call it from their .destroy handlers. Signed-off-by:
-
Tom Parkin authored
L2TP sessions hold a reference to the tunnel socket to prevent it going away while sessions are still active. However, since tunnel destruction is handled by the sock sk_destruct callback there is a catch-22: a tunnel with sessions cannot be deleted since each session holds a reference to the tunnel socket. If userspace closes a managed tunnel socket, or dies, the tunnel will persist and it will be neccessary to individually delete the sessions using netlink commands. This is ugly. To prevent this occuring, this patch leverages the udp encapsulation socket destroy callback to gain early notification when the tunnel socket is closed. This allows us to safely close the sessions running in the tunnel, dropping the tunnel socket references in the process. The tunnel socket is then destroyed as normal, and the tunnel resources deallocated in sk_destruct. While we're at it, ensure that l2tp_tunnel_closeall correctly drops session references to allow the sessions to be deleted rather than leaking. Signed-off-by:
-
Tom Parkin authored
Users of udp encapsulation currently have an encap_rcv callback which they can use to hook into the udp receive path. In situations where a encapsulation user allocates resources associated with a udp encap socket, it may be convenient to be able to also hook the proto .destroy operation. For example, if an encap user holds a reference to the udp socket, the destroy hook might be used to relinquish this reference. This patch adds a socket destroy hook into udp, which is set and enabled in the same way as the existing encap_rcv hook. Signed-off-by:
-
Masatake YAMATO authored
Trigger BUG_ON if a group name is longer than GENL_NAMSIZ. Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Signed-off-by:
-
git://1984.lsi.us.es/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains 7 Netfilter/IPVS fixes for 3.9-rc, they are: * Restrict IPv6 stateless NPT targets to the mangle table. Many users are complaining that this target does not work in the nat table, which is the wrong table for it, from Florian Westphal. * Fix possible use before initialization in the netns init path of several conntrack protocol trackers (introduced recently while improving conntrack netns support), from Gao Feng. * Fix incorrect initialization of copy_range in nfnetlink_queue, spotted by Eric Dumazet during the NFWS2013, patch from myself. * Fix wrong calculation of next SCTP chunk in IPVS, from Julian Anastasov. * Remove rcu_read_lock section in IPVS while calling ipv4_update_pmtu not required anymore after change introduced in 3.7, again from Julian. * Fix SYN looping in IPVS state sync if the backup is used a real server in DR/TUN modes, this required a new /proc entry to disable the director function when acting as backup, also from Julian. * Remove leftover IP_NF_QUEUE Kconfig after ip_queue removal, noted by Paul Bolle. ==================== Signed-off-by:
-
