- 31 Oct, 2017 23 commits
-
-
Oleh Kravchenko authored
Astrometa T2hybrid (15f4:0135) has IR on Interface 0. Signed-off-by:
Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Oleh Kravchenko authored
Add the keymap module for Astrometa T2hybrid remote control commands. Signed-off-by:
-
Oleh Kravchenko authored
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0. Remote controller supplied with this tuner fully compatible with RC_MAP_MSI_DIGIVOX_III. Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: James Hogan <jhogan@kernel.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: "Antti Seppälä" <a.seppala@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Sakari Ailus authored
The atomisp driver uses the videobuf1 framework for buffer management. The framework is being removed; switch to videobuf2 needs to be made. There are only a handful of remaining non-staging drivers using videobuf1. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by:
-
Andy Shevchenko authored
Snail address is subject to change, remove it completely from the code. This has been done using the following script: sed -i '/You should/,/02110-1301/d' \ $(git grep -n -w Franklin -- drivers/staging/media/atomisp/ | cut -f1 -d:) No functional change intended. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
media/lm3642.h is not used anywhere. Moreover, there is a driver under LEDs framework for very same IP which would be used anyway. Signed-off-by:
-
Andy Shevchenko authored
struct camera_af_platform_data and bound functions are not used anywhere. Signed-off-by:
-
Andy Shevchenko authored
Remove unused members along with dead code. Mostly done with help of coccinelle. Signed-off-by:
-
Andy Shevchenko authored
There are 3 declarations that are present in atomisp_platform.h and atomisp_gmin_platform.h. Remove duplications from the latter. Signed-off-by:
-
Andy Shevchenko authored
There is redundant callback which does nothing in upstreamed version of the driver. Remove it along with user call places. Mostly done with help of coccinelle. Signed-off-by:
-
Andy Shevchenko authored
There is redundant callback which does nothing in upstreamed version of the driver. Remove it along with user call places. Mostly done with help of coccinelle. Signed-off-by:
-
Andy Shevchenko authored
GPIO handling is done only in two modules, the rest do not need to include linux/gpio.h header. Signed-off-by:
-
Andy Shevchenko authored
gpiod_get() configures GPIO line at the time of successful request. Thus, no need to do this explicitly. Signed-off-by:
-
Andy Shevchenko authored
Since most of the drivers are being used on ACPI enabled platforms there is no need to keep legacy API support for them. Thus, switch to ->probe_new() callback and remove orphaned code. Signed-off-by:
-
Andy Shevchenko authored
This is done using coccinelle semantic patch: //<smpl> @A@ identifier f, x; @@ -static f(...) { return i2c_add_driver(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { i2c_del_driver(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_i2c_driver; @@ -module_exit(e); +module_i2c_driver(x); //</smpl> Signed-off-by:
-
Andy Shevchenko authored
This sensor is not used by any known ACPI-enabled platform (and no kernel users for it so far). Just remove it for good until we get a platform which actually uses it. Signed-off-by:
-
Andy Shevchenko authored
This sensor is not used by any known ACPI-enabled platform (and no kernel users for it so far). Just remove it for good until we get a platform which actually uses it. Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devel@driverdev.osuosl.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Aishwarya Pant authored
Logging of explicit out of memory messages is redundant since memory allocation failures produce a backtrace. Done with the help of the following cocci script: @@ expression ex, ret; statement s; constant char[] c; constant err; identifier f, l; @@ ex = \(kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...) ... when != ex if ( ( !ex | unlikely(!ex) ) ) - { - f(..., c, ...); ( return ex; | return; | return err; | goto l; ) - } else s Signed-off-by: -
Srishti Sharma authored
The use of typedefs for struct is discouraged, and hence can be eliminated. Done using the following semantic patch by coccinelle. @r1@ type T; @@ typedef struct {...} T; @script: python p@ T << r1.T; T1; @@ if T[-2:] == "_t" or T[-2:] == "_T": coccinelle.T1 = T[:-2] else: coccinelle.T1 = T print T, T1 @r2@ type r1.T; identifier p.T1; @@ - typedef struct + T1 { ... } - T Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/atmel/atmel-isc.c: In function 'isc_async_complete': drivers/media/platform/atmel/atmel-isc.c:1900:28: warning: variable 'sd_entity' set but not used [-Wunused-but-set-variable] struct isc_subdev_entity *sd_entity; ^~~~~~~~~ Signed-off-by:
-
- 27 Oct, 2017 17 commits
-
-
Younian Wang authored
This is a NEC protocol type remote controller distributed with 96boards poplar@tocoding board. Signed-off-by:
Younian Wang <wangyounian@hisilicon.com> Signed-off-by:
Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Younian Wang authored
This is a NEC protocol type remote controller distributed with hisilicon TV demo boards. Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Arvind Yadav authored
It seems that the return value of usb_ifnum_to_if() can be NULL and needs to be checked. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Aishwarya Pant authored
For memory allocation functions that fail with a NULL return value, it is preferred to use the (!x) test in place of (x == NULL). Changes in atomisp2/css2400/sh_css.c were done by hand. Done with the help of the following cocci script: @@ type T; T* p; statement s,s1; @@ p = \(devm_kzalloc\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\| kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...) ...when != p if ( - p == NULL + !p ) s else s1 -- Changes in v3: Rebase changes over atomisp-next branch of the media tree Changes in atomisp2/css2400/sh_css.c were done by hand, the above script was not able to match the pattern if (a->b != null). Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Hans de Goede authored
The common-clk core expects clk consumers to always call enable/disable in a balanced manner. The atomisp driver does not call gmin_flisclk_ctrl() in a balanced manner, so add a clock_on bool and skip redundant calls. This fixes kernel oops like this one: [ 19.811613] gc0310_s_config S [ 19.811655] ------------[ cut here ]------------ [ 19.811664] WARNING: CPU: 1 PID: 720 at drivers/clk/clk.c:594 clk_core_disabl [ 19.811666] Modules linked in: tpm_crb(+) snd_soc_sst_atom_hifi2_platform tpm [ 19.811744] CPU: 1 PID: 720 Comm: systemd-udevd Tainted: G C OE 4.1 [ 19.811746] Hardware name: Insyde T701/T701, BIOS BYT70A.YNCHENG.WIN.007 08/2 [ 19.811749] task: ffff988df7ab2500 task.stack: ffffac1400474000 [ 19.811752] RIP: 0010:clk_core_disable+0xc0/0x130 ... [ 19.811775] Call Trace: [ 19.811783] clk_core_disable_lock+0x1f/0x30 [ 19.811788] clk_disable+0x1f/0x30 [ 19.811794] gmin_flisclk_ctrl+0x87/0xf0 [ 19.811801] 0xffffffffc0528512 [ 19.811805] 0xffffffffc05295e2 [ 19.811811] ? acpi_device_wakeup_disable+0x50/0x60 [ 19.811815] ? acpi_dev_pm_attach+0x8e/0xd0 [ 19.811818] ? 0xffffffffc05294d0 [ 19.811823] i2c_device_probe+0x1cd/0x280 [ 19.811828] driver_probe_device+0x2ff/0x450 Fixes: "staging: atomisp: use clock framework for camera clocks" Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Philipp Zabel authored
The TC358743 does not support more than 4 data lanes. Check that the lane count is valid. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Jacob Chen authored
ref docuemnt: ov5647-datasheet-v1.00-2009 Signed-off-by:
Jacob Chen <jacob-chen@iotwrt.com> Reviewed-by:
Luis Oliveira <lolivei@synopsys.com> Signed-off-by:
-
Jacob Chen authored
When I was supporting Rpi Camera Module on the ASUS Tinker board, I found this driver have some issues with rockchip's mipi-csi driver. It didn't place clock lane in LP-11 state before performing D-PHY initialisation. >From our experience, on some OV sensors, LP-11 state is not achieved while BIT(5)-0x4800 is cleared. So let's set BIT(5) and BIT(0) both while not streaming, in order to coax the clock lane into LP-11 state. 0x4800 : MIPI CTRL 00 BIT(5) : clock lane gate enable 0: continuous 1: none-continuous BIT(0) : manually set clock lane 0: Not used 1: used Signed-off-by:
-
Wenyou Yang authored
Add the ov7670_s_power function which is responsible for manipulating the power dowm mode through the PWDN pin and the reset operation through the RESET pin, and keep it powered at all times. [sakari.ailus@linux.intel.com: set pwdn_gpio direction only once] Signed-off-by:
Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:
-
Wenyou Yang authored
Add the get_fmt callback, also enable V4L2_SUBDEV_FL_HAS_DEVNODE flag to make this subdev has device node. Signed-off-by:
-
Wenyou Yang authored
Add the media entity pads initialization. Signed-off-by:
-
Hans Verkuil authored
This driver adds support for the Tegra CEC IP. It is based on the NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel. This has been converted to the CEC framework and cleaned up. Tested with my Jetson TK1 board. It has also been tested with the Tegra X1 in an embedded product. Note of warning for the Tegra X2: this SoC supports two HDMI outputs, but only one CEC adapter and the CEC bus is shared between the two outputs. This is a design mistake and the CEC adapter can control only one HDMI output. Never hook up both HDMI outputs to the CEC bus in a hardware design: this is illegal as per the CEC specification. The CEC bus can be shared between multiple inputs and zero or one outputs, but not between multiple outputs. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Hans Verkuil authored
This documents the binding for the Tegra CEC module. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is useless to use a variable to store this constant calculated at compile time. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by:
-
Muhammad Falak R Wani authored
The functions __bo_alloc, __bo_search_and_remove_from_free_rbtree, __bo_search_by_addr, __bo_search_by_addr_in_range, __bo_break_up and __bo_merge are local to the source and do not need to be in the global scope, so make them static. Cleans up sparse warnings: warning: symbol '__bo_alloc' was not declared. Should it be static? warning: symbol '__bo_search_and_remove_from_free_rbtree' was not declared. Should it be static? warning: symbol '__bo_search_by_addr' was not declared. Should it be static? warning: symbol '__bo_search_by_addr_in_range' was not declared. Should it be static? warning: symbol '__bo_break_up' was not declared. Should it be static? warning: symbol '__bo_merge' was not declared. Should it be static? Signed-off-by:
Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by:
-
Sakari Ailus authored
There was no specific item regarding what should be done to sensor, lens and flash drivers. Add one, to replace the vague item denoting support only to particular sensor, lens and flash devices. Signed-off-by:
-
