The devpriv->usedma flag can be checked to determine which handler
function should be used to transfer the analog input data. Do that
instead and remove the member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only set when the analog input
subdevice maxdata is 0xffff. Just check the s->maxdata and remove
the private data member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to 0. Remove it and the
affected code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set only used during the (*detach)
to check if the board can be reset. The pci9118_reset() function just
needs a valid dev->iobase. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*do_cmdtest) only allows TRIG_COUNT, TRIG_NONE, or TRIG_EXT as the
cmd->stop_src. Remove the disabled code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only set when the cmd->convert_src
is TRIG_NOW. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->stop_arg.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to I8254_OSC_BASE_4MHZ.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->scan_end_arg.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the s->async->prealloc_bufsz.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->chanlist.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->chanlist_len.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the boardinfo about the interrupt function and just call it
directly.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the only reset fuction used by this driver.  We can remove it from
the boardinfo and absorb the code from hwdrv_apci1564.c into the driver.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi-data common code always allocates 7 subdevices.  This driver
cannot or will not use the ones we are currently allocating for analog
input and output or EEPROM, so just don't allocate these subdevices at
all.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board always has 32 digital outputs.  Remove the test when
initializing the subdevice.

Also, since this board is the only one supported by this driver, remove
the boardinfo about the digital outputs and just use the data directly in
the subdevice init.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed a few spaces to fix style errors
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For obvious error messages, use dev_err() in order to provide userspace
with more useful information and use the common kernel coding style.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.

Verified by compilation only.

The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
- return ret;
+ return C;
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I will be not able to work on ozwpan driver anymore.
Remove my name & add Tateno as maintainer.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Acked-by: Shigekatsu Tateno <shigekatsu.tateno@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: ozproto.c fix for "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)"

Fixed the warning message by replacing memcpy() with ether_addr_copy()
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "devs" is a pointer to g_net_dev in ozmain.c.
g_net_dev has a default value as empty string.
So "devs" cannot be NULL, removes NULL check for "devs".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To be future-proof and for better readability the time comparisons are modified
to use time_before() instead of plain, error-prone math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following sparse error:

drivers/staging/lustre/lustre/obdclass/llog_ioctl.c:388:39: error: incompatible types for operation (>)
drivers/staging/lustre/lustre/obdclass/llog_ioctl.c:388:39:    left side has type char *ioc_inlbuf2
drivers/staging/lustre/lustre/obdclass/llog_ioctl.c:388:39:    right side has type int
Signed-off-by: Andreas Platschek <platschek@ict.tuwien.ac.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary brackets from return statements in socklnd.c,
socklnd.h, socklnd_cb.c and socklnd_lib-linux.c to meet
kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary line continuation '\' in socklnd.c to meet
kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed indenting of if statement in socklnd.c to meet kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a required space before open brace and parenthsis
in socklnd.c to meet kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary brackets from return statements in socklnd.c
to meet kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following sparse warnings:

drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:44:1: warning: symbol 'kiblnd_tx_done' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:102:10: warning: symbol 'kiblnd_get_idle_tx' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:131:1: warning: symbol 'kiblnd_drop_rx' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:212:10: warning: symbol 'kiblnd_find_waiting_tx_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:238:1: warning: symbol 'kiblnd_handle_completion' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:277:1: warning: symbol 'kiblnd_send_completion' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:296:1: warning: symbol 'kiblnd_handle_rx' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:457:1: warning: symbol 'kiblnd_rx_complete' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:527:13: warning: symbol 'kiblnd_kvaddr_to_page' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:699:1: warning: symbol 'kiblnd_setup_rd_iov' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:752:1: warning: symbol 'kiblnd_setup_rd_kiov' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:792:1: warning: symbol 'kiblnd_post_tx_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:996:1: warning: symbol 'kiblnd_tx_complete' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1270:1: warning: symbol 'kiblnd_connect_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1627:1: warning: symbol 'kiblnd_reply' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1814:1: warning: symbol 'kiblnd_thread_fini' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1828:1: warning: symbol 'kiblnd_peer_notify' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1934:1: warning: symbol 'kiblnd_handle_early_rxs' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1957:1: warning: symbol 'kiblnd_abort_txs' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1993:1: warning: symbol 'kiblnd_finalise_conn' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2167:1: warning: symbol 'kiblnd_reject' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2178:1: warning: symbol 'kiblnd_passive_connect' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2452:1: warning: symbol 'kiblnd_reconnect' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2516:1: warning: symbol 'kiblnd_rejected' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2655:1: warning: symbol 'kiblnd_check_connreply' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:2754:1: warning: symbol 'kiblnd_active_connect' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:3025:1: warning: symbol 'kiblnd_check_conns' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:3108:1: warning: symbol 'kiblnd_disconnect_conn' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:3247:1: warning: symbol 'kiblnd_complete' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:904:20: warning: context imbalance in 'kiblnd_post_tx_locked' - unexpected unlock
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following warning in lib-eq.c
warning: symbol 'lnet_eq_dequeue_event' was not declared. Should it be static?
Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following warning in lib-eq.c
warning: context imbalance in 'lnet_eq_wait_locked' - unexpected unlock
Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>