- 11 Nov, 2013 1 commit
-
-
Jiri Pirko authored
If reassembled packet would fit into outdev MTU, it is not fragmented according the original frag size and it is send as single big packet. The second case is if skb is gso. In that case fragmentation does not happen according to the original frag size. This patch fixes these. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 09 Nov, 2013 2 commits
-
-
Sebastian Hesselbarth authored
Lennart says: "I haven't been able to spend time on mv643xx_eth for a while now, so if you want to take over maintainership, I'd be fine with that." Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
Lennert Buytenhek <buytenh@wantstofly.org> Acked-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Yang Yingliang authored
With psched_ratecfg_precompute(), tbf can deal with 64bit rates. Add two new attributes so that tc can use them to break the 32bit limit. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Suggested-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 08 Nov, 2013 37 commits
-
-
John Fastabend authored
The number of stations in use is kept in the num_rx_pools counter in the ixgbe_adapter structure. This is in turn used by the queue allocation scheme to determine how many queues are needed to support the number of pools in use with the current feature set. This works as long as the pools are added and destroyed in order because (num_rx_pools * queues_per_pool) is equal to the last queue in use by a pool. But as soon as you delete a pool out of order this is no longer the case. So the above multiplication allocates to few queues and a pool may reference a ring that has not been allocated/initialized. To resolve use the bit mask of in use pools to determine the final pool being used and allocate enough queues so that we don't inadvertently remove its queues. # ip link add link eth2 \ numtxqueues 4 numrxqueues 4 txqueuelen 50 type macvlan # ip link set dev macvlan0 up # ip link add link eth2 \ numtxqueues 4 numrxqueues 4 txqueuelen 50 type macvlan # ip link set dev macvlan1 up # for i in {0..100}; do ip link set dev macvlan0 down; ip link set dev macvlan0 up; done; Signed-off-by:John Fastabend <john.r.fastabend@intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
John Fastabend authored
In the recent support for layer 2 hardware acceleration, I added a few references to real_num_rx_queues and num_rx_queues which are only available with CONFIG_RPS. The fix is first to remove unnecessary references to num_rx_queues. Because the hardware offload case is limited to cases where RX queues and TX queues are equal we only need a single check. Then wrap the single case in an ifdef. The patch that introduce this is here, commit a6cc0cfa Author: John Fastabend <john.r.fastabend@intel.com> Date: Wed Nov 6 09:54:46 2013 -0800 net: Add layer 2 hardware acceleration operations for macvlan devices Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Duan Jiong authored
As the rfc 4191 said, the Router Preference and Lifetime values in a ::/0 Route Information Option should override the preference and lifetime values in the Router Advertisement header. But when the kernel deals with a ::/0 Route Information Option, the rt6_get_route_info() always return NULL, that means that overriding will not happen, because those default routers were added without flag RTF_ROUTEINFO in rt6_add_dflt_router(). In order to deal with that condition, we should call rt6_get_dflt_router when the prefix length is 0. Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Jiri Benc authored
Commit 0628b123 ("netfilter: nfnetlink: add batch support and use it from nf_tables") introduced a bug leading to various crashes in netlink_ack when netlink message with invalid nlmsg_len was sent by an unprivileged user. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Andreas Henriksson authored
When trying to delete a table >= 256 using iproute2 the local table will be deleted. The table id is specified as a netlink attribute when it needs more then 8 bits and iproute2 then sets the table field to RT_TABLE_UNSPEC (0). Preconditions to matching the table id in the rule delete code doesn't seem to take the "table id in netlink attribute" into condition so the frh_get_table helper function never gets to do its job when matching against current rule. Use the helper function twice instead of peaking at the table value directly. Originally reported at: http://bugs.debian.org/724783Reported-by:
Nicolas HICHER <nhicher@avencall.com> Signed-off-by:
Andreas Henriksson <andreas@fatal.se> Signed-off-by:
-
Florent Fourcot authored
Take ip6_fl_lock before to read and update a label. v2: protect only the relevant code Reported-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Florent Fourcot authored
If the last RFC 6437 does not give any constraints for lifetime of flow labels, the previous RFC 3697 spoke of a minimum of 120 seconds between reattribution of a flow label. The maximum linger is currently set to 60 seconds and does not allow this configuration without CAP_NET_ADMIN right. This patch increase the maximum linger to 150 seconds, allowing more flexibility to standard users. Signed-off-by:
-
Florent Fourcot authored
It is already possible to set/put/renew a label with IPV6_FLOWLABEL_MGR and setsockopt. This patch add the possibility to get information about this label (current value, time before expiration, etc). It helps application to take decision for a renew or a release of the label. v2: * Add spin_lock to prevent race condition * return -ENOENT if no result found * check if flr_action is GET v3: * move the spin_lock to protect only the relevant code Signed-off-by:
-
Eric Dumazet authored
By moving code around, we avoid : 1) A reload of iph->ihl (bit field, so needs a mask) 2) A conditional test (replaced by a conditional mov on x86) Fast path loads iph->protocol anyway. Signed-off-by:
-
Baruch Siach authored
Tested in VLAB Works Xtensa simulation. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Here is one more pull request for the 3.13 window. This is primarily composed of downstream pull requests that were posted while I was traveling during the last part of the 3.12 release. For the mac80211 bits, Johannes says: "I have two DFS fixes (ath9k already supports DFS) and a fix for a pointer race." And... "In this round for mac80211-next I have: * mesh channel switch support * a CCM rewrite, using potential hardware offloads * SMPS for AP mode * RF-kill GPIO driver updates to make it usable as an ACPI driver * regulatory improvements * documentation fixes * DFS for IBSS mode * and a few small other fixes/improvements" For the TI driver bits, Luca says: "Some patches intended for 3.13. Eliad continues upstreaming pending patches from the internal tree." For the iwlwifi bits, Emmanuel says: "There are a few fixes from Johannes mostly clean up patches. We have also a few other fixes that are relevant for the new firmware that has not been released yet." For the Bluetooth bits, Gustavo says: "A last fix to the 3.12. I ended forgetting to send it before, I hope we can still make the way to 3.12. It is a revert and it fixes an issue with bluetooth suspend/hibernate that had many bug reports. Please pull or let me know of any problems. Thanks!" (Obviously, that one didn't make 3.12...) Also... "One more big pull request for 3.13. These are the patches we queued during last week. Here you will find a lot of improvements to the HCI and L2CAP and MGMT layers with the main ones being a better debugfs support and end of work of splitting L2CAP into Core and Socket parts." Additionally, there is one ath9k patch to enable DFS in IBSS mode for that driver. I appreciate your consideration for taking this extra pull request this cycle. Please let me know if there are problems! ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
Eric Dumazet authored
While testing virtio_net and skb_segment() changes, Hannes reported that UFO was sending wrong frames. It appears this was introduced by a recent commit : 8c3a897b ("inet: restore gso for vxlan") The old condition to perform IP frag was : tunnel = !!skb->encapsulation; ... if (!tunnel && proto == IPPROTO_UDP) { So the new one should be : udpfrag = !skb->encapsulation && proto == IPPROTO_UDP; ... if (udpfrag) { Initialization of udpfrag must be done before call to ops->callbacks.gso_segment(skb, features), as skb_udp_tunnel_segment() clears skb->encapsulation (We want udpfrag to be true for UFO, false for VXLAN) With help from Alexei Starovoitov Reported-by:
-
David S. Miller authored
Mathias Krause says: ==================== move pskb_put (was: IPsec improvements) This series moves pskb_put() to the core code, making the code duplication in caif obsolete (patches 1 and 2). Patch 3 fixes a few kernel-doc issues. v2 of this series does no longer contain the skb_cow_data() patch and therefore no performance improvements for IPsec. The change is still under discussion, but otherwise independent from the above changes. Please apply! v2: - kernel-doc fixes for pskb_put, as noticed by Ben - dropped skb_cow_data patch as it's still discussed - added a kernel-doc fixes patch (patch 3) ==================== Signed-off-by: -
Mathias Krause authored
Use "@" to refer to parameters in the kernel-doc description. According to Documentation/kernel-doc-nano-HOWTO.txt "&" shall be used to refer to structures only. Signed-off-by:
Mathias Krause <mathias.krause@secunet.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Mathias Krause authored
Also remove the warning for fragmented packets -- skb_cow_data() will linearize the buffer, removing all fragments. Signed-off-by:
-
Mathias Krause authored
This function has usage beside IPsec so move it to the core skbuff code. While doing so, give it some documentation and change its return type to 'unsigned char *' to be in line with skb_put(). Signed-off-by:
-
Andreas Herrmann authored
Changing MTU size of an xgmac network interface while it is active can cause a panic like skbuff: skb_over_panic: text:c03bc62c len:1090 put:1090 head:edfb6900 data:edfb6942 tail:0xedfb6d84 end:0xedfb6bc0 dev:eth0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 762 Comm: python Tainted: G W 3.10.0-00015-g3e33cd7 #309 task: edcfe000 ti: ed67e000 task.ti: ed67e000 PC is at skb_panic+0x64/0x70 LR is at wake_up_klogd+0x5c/0x68 This happens because xgmac_change_mtu modifies dev->mtu before the network interface is quiesced. And thus there still might be buffers in use which have a buffer size based on the old MTU. To fix this I moved the change of dev->mtu after the call to xgmac_stop. Another modification is required (in xgmac_stop) to ensure that xgmac_xmit is really not called anymore (xgmac_tx_complete might wake up the queue again). I've tested the fix by switching MTU size every second between 600 and 1500 while network traffic was going on. The test box survived a test of several hours (until I've stopped it) whereas w/o this fix above panic occurs after several minutes (at most). Change since v1: - remove call to netif_stop_queue at beginning of xgmac_stop - use netif_tx_disable instead of locking+netif_stop_queue Signed-off-by:
Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx4: Mellanox driver update 07-11-2013 This patchset contains some enhancements and bug fixes for the mlx4_* drivers. Patchset was applied and tested against commit: "9bb8ca86 virtio-net: switch to use XPS to choose txq" ==================== Signed-off-by:
-
Eugenia Emantayev authored
For each RX/TX ring and its CQ, allocation is done on a NUMA node that corresponds to the core that the data structure should operate on. The assumption is that the core number is reflected by the ring index. The affected allocations are the ring/CQ data structures, the TX/RX info and the shared HW/SW buffer. For TX rings, each core has rings of all UPs. Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
This is done to optimize FW/HW access to host memory. Signed-off-by:
-
Eugenia Emantayev authored
Currently all TX/RX rings and completion queues are part of the netdev priv structure and are allocated statically. This patch will change the priv to hold only arrays of pointers and therefore all TX/RX rings and completetion queues will be allocated dynamically. This is in preparation for NUMA aware allocations. Signed-off-by:
-
Rony Efraim authored
Allow immediate activate of VGT->VST and VST->VGT transitions, without the need of rebinding in mlx4_master_immediate_activate_vlan_qos(). Also in struct res_qp: add qp parameters (vlan_index,fvl,vlan_cntrol..) to the saved set, in order to restore when move to VGT. - Clear at mlx4_RST2INIT_QP_wrapper() - Save at mlx4_INIT2RTR_QP_wrapper() - Restore at mlx4_vf_immed_vlan_work_handler() Update mlx4_vf_immed_vlan_work_handler() to support VGT. Signed-off-by:
Rony Efraim <ronye@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by:
-
Jack Morgenstein authored
To guarantee that all unused fields in all FW commands for both inboxes and outboxes are zeroed out, initialize the mailbox buffer to all zeroes. This is especially important for SRIOV comm-channel virtual commands (such as QUERY_FUNC_CAP), where if new fields are added to support new features, the driver can depend on older kernels passing zeroes in these fields. In addition to zeroing out the mailbox buffer at allocation time, all (now unnecessary) calls to memset by the callers of mlx4_alloc_cmd_mailbox() are removed. Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Eyal Perry authored
Modify RFS code to support applying filters for incoming UDP streams. Signed-off-by:
Eyal Perry <eyalpe@mellanox.com> Signed-off-by:
-
David S. Miller authored
John Fastabend says: ==================== l2 hardware accelerated macvlans This patch adds support to offload macvlan net_devices to the hardware. With these patches packets are pushed to the macvlan net_device directly and do not pass through the lower dev. The patches here have made it through multiple iterations each with a slightly different focus. First I tried to push these as a new link type called "VMDQ". The patches shown here, http://comments.gmane.org/gmane.linux.network/237617 Following this implementation I renamed the link type "VSI" and addressed various comments. Finally Neil Horman picked up the patches and integrated the offload into the macvlan code. Here, http://permalink.gmane.org/gmane.linux.network/285658 The attached series is clean-up of his patches, with a few fixes. If folks find this series acceptable there are a few items we can work on next. First broadcast and multicast will use the hardware even for local traffic with this series. It would be best (I think) to use the software path for macvlan to macvlan traffic and save the PCIe bus. This depends on how much you value CPU time vs PCIE bandwidth. This will need another patch series to flush out. Also this series only allows for layer 2 mac forwarding where some hardware supports more interesting forwarding capabilities. Integrating with OVS may be useful here. As always any comments/feedback welcome. My basic I/O test is here but I've also done some link testing, SRIOV/DCB with macvlans and others, Changelog: v2: two fixes to ixgbe when all features DCB, FCoE, SR-IOV are enabled with macvlans. A VMDQ_P() reference should have been accel->pool and do not set the offset of the ring index from dfwd add call. The offset is used by SR-IOV so clearing it can cause SR-IOV quue index's to go sideways. With these fixes testing macvlan's with SRIOV enabled was successful. v3: addressed Neil's comments in ixgbe fixed error path on dfwd_add_station() in ixgbe fixed ixgbe to allow SRIOV and accelerated macvlans to coexist. v4: Dave caught some strange indentation, fixed it here ==================== Signed-off-by:
-
John Fastabend authored
Now that l2 acceleration ops are in place from the prior patch, enable ixgbe to take advantage of these operations. Allow it to allocate queues for a macvlan so that when we transmit a frame, we can do the switching in hardware inside the ixgbe card, rather than in software. Signed-off-by:
-
John Fastabend authored
Add a operations structure that allows a network interface to export the fact that it supports package forwarding in hardware between physical interfaces and other mac layer devices assigned to it (such as macvlans). This operaions structure can be used by virtual mac devices to bypass software switching so that forwarding can be done in hardware more efficiently. Signed-off-by:
-
Amir Vadai authored
timecounter_init() was was called only after first potential timecounter_read(). Moved mlx4_en_init_timestamp() before mlx4_en_init_netdev() Signed-off-by:
-
Dan Carpenter authored
"card2" is NULL here so I have changed it to use "id2" instead of "card2->interface.id". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
There is a bug in cpsw_probe() where we do: ndev->irq = platform_get_irq(pdev, 0); if (ndev->irq < 0) { The problem is that "ndev->irq" is unsigned so the error handling doesn't work. I have changed it to a regular int. Signed-off-by: -
Dan Carpenter authored
We recently added a new error path and it needs a dev_put(). Fixes: 7adac1ec ('6lowpan: Only make 6lowpan links to IEEE802154 devices') Signed-off-by:
-
Eyal Perry authored
On top of commit 366cddb4 "IB/rdma_cm: TOS <=> UP mapping for IBoE", add support for case vlan egress map is used. When the IBoE session is being set over a vlan, inherit the socket priority to vlan priority mapping which was configured for the vlan device egress map. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Eyal Perry authored
Provide a method for read-only access to the vlan device egress mapping. Do this by refactoring vlan_dev_get_egress_qos_mask() such that now it receives as an argument the skb priority instead of pointer to the skb. Such an access is needed for the IBoE stack where the control plane goes through the network stack. This is an add-on step on top of commit d4a96865 "net/route: export symbol ip_tos2prio" which allowed the RDMA-CM to use ip_tos2prio. Signed-off-by:
-
Ivan Vecera authored
If build_skb fails the memory associated with the ring buffer is freed but the ri->data member is not zeroed in this case. This causes a double-free of this memory in tg3_free_rings->... path. The patch moves this block after setting ri->data to NULL. It would be nice to fix this bug also in stable >= v3.4 trees. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Ariel Elior will take over the bnx2x maintenance. It's been a pleasure! Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Acked-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
-
Andrey Vagin authored
sk_filter isn't freed if bpf_func is equal to sk_run_filter. This memory leak was introduced by v3.12-rc3-224-gd45ed4a4 "net: fix unsafe set_memory_rw from softirq". Before this patch sk_filter was freed in sk_filter_release_rcu, now it should be freed in bpf_jit_free. Here is output of kmemleak: unreferenced object 0xffff8800b774eab0 (size 128): comm "systemd", pid 1, jiffies 4294669014 (age 124.062s) hex dump (first 32 bytes): 00 00 00 00 0b 00 00 00 20 63 7f b7 00 88 ff ff ........ c...... 60 d4 55 81 ff ff ff ff 30 d9 55 81 ff ff ff ff `.U.....0.U..... backtrace: [<ffffffff816444be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811845af>] __kmalloc+0xef/0x260 [<ffffffff81534028>] sock_kmalloc+0x38/0x60 [<ffffffff8155d4dd>] sk_attach_filter+0x5d/0x190 [<ffffffff815378a1>] sock_setsockopt+0x991/0x9e0 [<ffffffff81531bd6>] SyS_setsockopt+0xb6/0xd0 [<ffffffff8165f3e9>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff v2: add extra { } after else Fixes: d45ed4a4 ("net: fix unsafe set_memory_rw from softirq") Acked-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
