- 19 Apr, 2020 40 commits
-
-
Lars-Peter Clausen authored
Fix a typo. 'at the a time' -> 'at a time'. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Johan Jonker authored
The description below is already in use for px30.dtsi, but was somehow never added to a document, so add "rockchip,px30-saradc", "rockchip,rk3399-saradc" for saradc nodes on a px30 platform to rockchip-saradc.yaml. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Jonker authored
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-saradc", "rockchip,rk3399-saradc" for saradc nodes on a rk3308 platform to rockchip-saradc.yaml. Signed-off-by:
-
Johan Jonker authored
Current dts files with 'saradc' nodes are manually verified. In order to automate this process rockchip-saradc.txt has to be converted to yaml. Signed-off-by:
-
Lars-Peter Clausen authored
The IIO DMA buffer is a DMA buffer implementation. As such it should include buffer_impl.h rather than buffer.h. The include to buffer.h in buffer-dma.h should be buffer_impl.h so it has access to the struct iio_buffer definition. The code currently only works because all places that use buffer-dma.h include buffer_impl.h before it. The include to buffer.h in industrialio-buffer-dma.c can be removed since those file does not reference any of buffer consumer functions. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Alexandru Lazar authored
Add driver for the Maxim MAX1241 12-bit, single-channel ADC. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdfReviewed-by:
Alexandru Lazar <alazar@startmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Alexandru Lazar authored
Add device-tree bindings documentation for the MAX1241 device driver. Signed-off-by:
-
Gaëtan André authored
Add support for STMicroelectronics LISHH12 accelerometer in st_accel framework. https://www.st.com/resource/en/datasheet/lis2hh12.pdfSigned-off-by:
Gaëtan André <rvlander@gaetanandre.eu> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Gaëtan André authored
Add LIS2HH12 compatible entry. Signed-off-by:
-
Jimmy Assarsson authored
Add LIS3MDL register map to sensor hub device table. Tested with LSM6DSM. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
-
Jimmy Assarsson authored
Support for sensor with up to 8 different ODR settings. Required for supporting LIS3MDL as sensor hub slave device. Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Tested-by Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce st_lsm6dsx_shub_set_full_scale routine in order to configure the i2c slave device sensitivity Tested-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Fabrice Gasnier authored
Convert the STM32 DAC binding to DT schema format using json-schema Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by:
-
Nishant Malpani authored
Convert the TSL2563 device tree bindings to the new YAML format. Signed-off-by:
Nishant Malpani <nish.malpani25@gmail.com> Reviewed-by:
-
Alexandru Ardelean authored
This change adds the binding doc for the AD9467 ADC. Signed-off-by:
-
Michael Hennerich authored
The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter (ADC). It is optimized for high performanceover wide bandwidths and ease of use. The product operates at a 250 MSPS conversion rate and is designed for wireless receivers, instrumentation, and test equipment that require a high dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low voltage differential input clock for full performance operation. No external reference or driver components are required for many applications. Data outputs are LVDS compatible (ANSI-644 compatible) and include the means to reduce the overall current needed for short trace distances. Since the chip can operate at such high sample-rates (much higher than classical interfaces), it requires that a DMA controller be used to interface directly to the chip and push data into memory. Typically, the AXI ADC IP core is used to interface with it. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdfSigned-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Alexandru Ardelean authored
This change adds the bindings documentation for the AXI ADC driver. Reviewed-by:
-
Michael Hennerich authored
This change adds support for the Analog Devices Generic AXI ADC IP core. The IP core is used for interfacing with analog-to-digital (ADC) converters that require either a high-speed serial interface (JESD204B/C) or a source synchronous parallel interface (LVDS/CMOS). Usually, some other interface type (i.e SPI) is used as a control interface for the actual ADC, while the IP core (controlled via this driver), will interface to the data-lines of the ADC and handle the streaming of data into memory via DMA. Because of this, the AXI ADC driver needs the other SPI-ADC driver to register with it. The SPI-ADC needs to be register via the SPI framework, while the AXI ADC registers as a platform driver. The two cannot be ordered in a hierarchy as both drivers have their own registers, and trying to organize this [in a hierarchy becomes] problematic when trying to map memory/registers. There are some modes where the AXI ADC can operate as standalone ADC, but those will be implemented at a later point in time. DocLink: https://wiki.analog.com/resources/fpga/docs/axi_adc_ipSigned-off-by:
-
Alexandru Ardelean authored
Currently, when using a 'iio_dmaengine_buffer_alloc()', an matching call to 'iio_dmaengine_buffer_free()' must be made. With this change, this can be avoided by using 'devm_iio_dmaengine_buffer_alloc()'. The buffer will get free'd via the device's devres handling. Signed-off-by:
-
Alexandru Ardelean authored
The 'size_t' type behaves differently on 64-bit architectures, and causes compiler a warning of the sort "format '%u' expects argument of type 'unsigned int', but argument 3 has type 'size_t {aka long unsigned int}'". This change adds the correct specifier for the 'align' field. Fixes: 4538c185 ("iio: buffer-dmaengine: Report buffer length requirements") Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
Alexandru Ardelean authored
The format for all ADI AXI IP cores is the same. i.e. 'major.minor.patch'. This patch adds the helper macros to be re-used in ADI AXI drivers. Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Alexandru Ardelean authored
The initial version use a tab between '#define' & 'ADI_AXI_REG_VERSION'. This changes it to space. The change is purely cosmetic. Acked-by:
-
Alexandru Ardelean authored
This seems like a left-over from a7348347 ("staging:iio: Add polling of events on the ring access chrdev."). Then it was moved into the sca3000 driver around 9dd4694d ("iio: staging: sca3000: hide stufftoread logic"), and that one seemed to be the only user of this. Then it eventually was no longer used after 152a6a88 ("staging:iio:accel:sca3000 move to hybrid hard / soft buffer design.") Signed-off-by:
-
Rohit Sarkar authored
Remove redundant comparison to a boolean variable. Fixes coccinelle warning: drivers/iio/temperature//ltc2983.c:393:20-32: WARNING: Comparison to bool drivers/iio/temperature//ltc2983.c:394:20-32: WARNING: Comparison to bool Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
Rohit Sarkar authored
The debugfs interface provides direct access to read and write device registers if debugfs is enabled. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
-
Andy Shevchenko authored
For easy grepping on debug purposes join string literals back in the messages. No functional change. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by:
-
Andy Shevchenko authored
Show by using a corresponding API call that GPIO is optional. Signed-off-by:
-
Andy Shevchenko authored
Convert to use ->read_avail() instead of open-coded attribute handling. Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
With DEBUG_SHIRQ enabled we have a kernel crash [ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 116.606571] Call Trace: [ 116.609023] <IRQ> [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280] because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns. Fixes: aae95394 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by:
-
Wolfram Sang authored
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
Nishant Malpani authored
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by:
-
