- 26 Sep, 2014 40 commits
-
-
Pavel Shilovsky authored
If we get into read_into_pages() from cifs_readv_receive() and then loose a network, we issue cifs_reconnect that moves all mids to a private list and issue their callbacks. The callback of the async read request sets a mid to retry, frees it and wakes up a process that waits on the rdata completion. After the connection is established we return from read_into_pages() with a short read, use the mid that was freed before and try to read the remaining data from the a newly created socket. Both actions are not what we want to do. In reconnect cases (-EAGAIN) we should not mask off the error with a short read but should return the error code instead. Acked-by:
Jeff Layton <jlayton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> (cherry picked from commit 038bc961) Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Pavel Shilovsky authored
The existing mapping causes unlink() call to return error after delete operation. Changing the mapping to -EACCES makes the client process the call like CIFS protocol does - reset dos attributes with ATTR_READONLY flag masked off and retry the operation. Cc: stable@vger.kernel.org Signed-off-by:
-
Ilya Dryomov authored
We hard code cephx auth ticket buffer size to 256 bytes. This isn't enough for any moderate setups and, in case tickets themselves are not encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but ceph_decode_copy() doesn't - it's just a memcpy() wrapper). Since the buffer is allocated dynamically anyway, allocated it a bit later, at the point where we know how much is going to be needed. Fixes: http://tracker.ceph.com/issues/8979 Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
Sage Weil <sage@redhat.com> (cherry picked from commit c27a3e4d) Signed-off-by:
-
Ilya Dryomov authored
Add a helper for processing individual cephx auth tickets. Needed for the next commit, which deals with allocating ticket buffers. (Most of the diff here is whitespace - view with git diff -b). Cc: stable@vger.kernel.org Signed-off-by:
-
Sage Weil authored
We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. CC: stable@vger.kernel.org Signed-off-by:
-
Chris Mason authored
Similar to direct IO reads, direct IO writes are using truncate_pagecache_range to invalidate the page cache. This is incorrect due to the sub-block zeroing in the page cache that truncate_pagecache_range() triggers. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. cc: stable@vger.kernel.org Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> xfs: don't zero partial page cache pages during O_DIRECT writes xfs is using truncate_pagecache_range to invalidate the page cache during DIO reads. This is different from the other filesystems who only invalidate pages during DIO writes. truncate_pagecache_range is meant to be used when we are freeing the underlying data structs from disk, so it will zero any partial ranges in the page. This means a DIO read can zero out part of the page cache page, and it is possible the page will stay in cache. buffered reads will find an up to date page with zeros instead of the data actually on disk. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. [dchinner: catch error and warn if it fails. Comment.] cc: stable@vger.kernel.org Signed-off-by:
Chris Mason <clm@fb.com> Reviewed-by:
-
Dave Chinner authored
Similar to direct IO reads, direct IO writes are using truncate_pagecache_range to invalidate the page cache. This is incorrect due to the sub-block zeroing in the page cache that truncate_pagecache_range() triggers. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. cc: stable@vger.kernel.org Signed-off-by:
-
Dave Chinner authored
generic/263 is failing fsx at this point with a page spanning EOF that cannot be invalidated. The operations are: 1190 mapwrite 0x52c00 thru 0x5e569 (0xb96a bytes) 1191 mapread 0x5c000 thru 0x5d636 (0x1637 bytes) 1192 write 0x5b600 thru 0x771ff (0x1bc00 bytes) where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO write attempts to invalidate the cached page over this range, it fails with -EBUSY and so any attempt to do page invalidation fails. The real question is this: Why can't that page be invalidated after it has been written to disk and cleaned? Well, there's data on the first two buffers in the page (1k block size, 4k page), but the third buffer on the page (i.e. beyond EOF) is failing drop_buffers because it's bh->b_state == 0x3, which is BH_Uptodate | BH_Dirty. IOWs, there's dirty buffers beyond EOF. Say what? OK, set_buffer_dirty() is called on all buffers from __set_page_buffers_dirty(), regardless of whether the buffer is beyond EOF or not, which means that when we get to ->writepage, we have buffers marked dirty beyond EOF that we need to clean. So, we need to implement our own .set_page_dirty method that doesn't dirty buffers beyond EOF. This is messy because the buffer code is not meant to be shared and it has interesting locking issues on the buffer dirty bits. So just copy and paste it and then modify it to suit what we need. Note: the solutions the other filesystems and generic block code use of marking the buffers clean in ->writepage does not work for XFS. It still leaves dirty buffers beyond EOF and invalidations still fail. Hence rather than play whack-a-mole, this patch simply prevents those buffers from being dirtied in the first place. cc: <stable@kernel.org> Signed-off-by:
-
Dave Chinner authored
When running xfs/305, I noticed that quotacheck was flushing dquot buffers that did not have the xfs_dquot_buf_ops verifiers attached: XFS (vdb): _xfs_buf_ioapply: no ops on block 0x1dc8/0x1dc8 ffff880052489000: 44 51 01 04 00 00 65 b8 00 00 00 00 00 00 00 00 DQ....e......... ffff880052489010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 1 PID: 2376 Comm: mount Not tainted 3.16.0-rc2-dgc+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006fe38000 ffff88004a0ffae8 ffffffff81cf1cca 0000000000000001 ffff88004a0ffb88 ffffffff814d50ca 000010004a0ffc70 0000000000000000 ffff88006be56dc4 0000000000000021 0000000000001dc8 ffff88007c773d80 Call Trace: [<ffffffff81cf1cca>] dump_stack+0x45/0x56 [<ffffffff814d50ca>] _xfs_buf_ioapply+0x3ca/0x3d0 [<ffffffff810db520>] ? wake_up_state+0x20/0x20 [<ffffffff814d51f5>] ? xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d513b>] xfs_buf_iorequest+0x6b/0xd0 [<ffffffff814d51f5>] xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d53ab>] __xfs_buf_delwri_submit+0x15b/0x220 [<ffffffff814d6040>] ? xfs_buf_delwri_submit+0x30/0x90 [<ffffffff814d6040>] xfs_buf_delwri_submit+0x30/0x90 [<ffffffff8150f89d>] xfs_qm_quotacheck+0x17d/0x3c0 [<ffffffff81510591>] xfs_qm_mount_quotas+0x151/0x1e0 [<ffffffff814ed01c>] xfs_mountfs+0x56c/0x7d0 [<ffffffff814f0f12>] xfs_fs_fill_super+0x2c2/0x340 [<ffffffff811c9fe4>] mount_bdev+0x194/0x1d0 [<ffffffff814f0c50>] ? xfs_finish_flags+0x170/0x170 [<ffffffff814ef0f5>] xfs_fs_mount+0x15/0x20 [<ffffffff811ca8c9>] mount_fs+0x39/0x1b0 [<ffffffff811e4d67>] vfs_kern_mount+0x67/0x120 [<ffffffff811e757e>] do_mount+0x23e/0xad0 [<ffffffff8117abde>] ? __get_free_pages+0xe/0x50 [<ffffffff811e71e6>] ? copy_mount_options+0x36/0x150 [<ffffffff811e8103>] SyS_mount+0x83/0xc0 [<ffffffff81cfd40b>] tracesys+0xdd/0xe2 This was caused by dquot buffer readahead not attaching a verifier structure to the buffer when readahead was issued, resulting in the followup read of the buffer finding a valid buffer and so not attaching new verifiers to the buffer as part of the read. Also, when a verifier failure occurs, we then read the buffer without verifiers. Attach the verifiers manually after this read so that if the buffer is then written it will be verified that the corruption has been repaired. Further, when flushing a dquot we don't ask for a verifier when reading in the dquot buffer the dquot belongs to. Most of the time this isn't an issue because the buffer is still cached, but when it is not cached it will result in writing the dquot buffer without having the verfier attached. Signed-off-by:
-
Doug Ledford authored
added struct sockaddr_storage to rdma_user_cm.h without also adding an include for linux/socket.h to make sure it is defined. Systemtap needs the header files to build standalone and cannot rely on other files to pre-include other headers, so add linux/socket.h to the list of includes in this file. Fixes: ee7aed45 ("RDMA/ucma: Support querying for AF_IB addresses") Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> (cherry picked from commit db1044d4) Signed-off-by:
-
Steve Wise authored
If the user creates a listening cm_id with backlog of 0 the IWCM ends up not allowing any connection requests at all. The correct behavior is for the IWCM to pick a default value if the user backlog parameter is zero. Lustre from version 1.8.8 onward uses a backlog of 0, which breaks iwarp support without this fix. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
NeilBrown authored
When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Cc: stable@vger.kernel.org (v3.5+) Fixes: 3ea7daa5Signed-off-by:
NeilBrown <neilb@suse.de> (cherry picked from commit b3968552) Signed-off-by:
-
NeilBrown authored
raid10 reshape clears unwanted bits from a bio->bi_flags using a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC was added. Since then it clears that bit but shouldn't. This results in a memory leak. So change to used the approved method of clearing unwanted bits. As this causes a memory leak which can consume all of memory the fix is suitable for -stable. Fixes: a38352e0 Cc: stable@vger.kernel.org (v3.10+) Reported-by: mdraid.pkoch@dfgh.net (Peter Koch) Signed-off-by:
-
NeilBrown authored
During recovery of a double-degraded RAID6 it is possible for some blocks not to be recovered properly, leading to corruption. If a write happens to one block in a stripe that would be written to a missing device, and at the same time that stripe is recovering data to the other missing device, then that recovered data may not be written. This patch skips, in the double-degraded case, an optimisation that is only safe for single-degraded arrays. Bug was introduced in 2.6.32 and fix is suitable for any kernel since then. In an older kernel with separate handle_stripe5() and handle_stripe6() functions the patch must change handle_stripe6(). Cc: stable@vger.kernel.org (2.6.32+) Fixes: 6c0069c0 Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by:
"Manibalan P" <pmanibalan@amiindia.co.in> Tested-by:
Dan Williams <dan.j.williams@intel.com> (cherry picked from commit 9c4bdf69) Signed-off-by:
-
Vladimir Davydov authored
If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by:Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org (cherry picked from commit 093facf3) Signed-off-by:
-
Eric W. Biederman authored
Since March 2009 the kernel has treated the state that if no MS_..ATIME flags are passed then the kernel defaults to relatime. Defaulting to relatime instead of the existing atime state during a remount is silly, and causes problems in practice for people who don't specify any MS_...ATIME flags and to get the default filesystem atime setting. Those users may encounter a permission error because the default atime setting does not work. A default that does not work and causes permission problems is ridiculous, so preserve the existing value to have a default atime setting that is always guaranteed to work. Using the default atime setting in this way is particularly interesting for applications built to run in restricted userspace environments without /proc mounted, as the existing atime mount options of a filesystem can not be read from /proc/mounts. In practice this fixes user space that uses the default atime setting on remount that are broken by the permission checks keeping less privileged users from changing more privileged users atime settings. Cc: stable@vger.kernel.org Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> (cherry picked from commit ffbc6f0e) Signed-off-by:
-
Eric W. Biederman authored
There are no races as locked mount flags are guaranteed to never change. Moving the test into do_remount makes it more visible, and ensures all filesystem remounts pass the MNT_LOCK_READONLY permission check. This second case is not an issue today as filesystem remounts are guarded by capable(CAP_DAC_ADMIN) and thus will always fail in less privileged mount namespaces, but it could become an issue in the future. Cc: stable@vger.kernel.org Acked-by:
-
Steven Rostedt (Red Hat) authored
After writting a test to try to trigger the bug that caused the ring buffer iterator to become corrupted, I hit another bug: WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238() Modules linked in: ipt_MASQUERADE sunrpc [...] CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000 ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010 ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003 Call Trace: [<ffffffff81503fb0>] ? dump_stack+0x4a/0x75 [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c [<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96 [<ffffffff810c74a3>] ? s_start+0xd7/0x17b [<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea [<ffffffff8114cf94>] ? seq_read+0x148/0x361 [<ffffffff81132d98>] ? vfs_read+0x93/0xf1 [<ffffffff81132f1b>] ? SyS_read+0x60/0x8e [<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2 Debugging this bug, which triggers when the rb_iter_peek() loops too many times (more than 2 times), I discovered there's a case that can cause that function to legitimately loop 3 times! rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek() only deals with the reader page (it's for consuming reads). The rb_iter_peek() is for traversing the buffer without consuming it, and as such, it can loop for one more reason. That is, if we hit the end of the reader page or any page, it will go to the next page and try again. That is, we have this: 1. iter->head > iter->head_page->page->commit (rb_inc_iter() which moves the iter to the next page) try again 2. event = rb_iter_head_event() event->type_len == RINGBUF_TYPE_TIME_EXTEND rb_advance_iter() try again 3. read the event. But we never get to 3, because the count is greater than 2 and we cause the WARNING and return NULL. Up the counter to 3. Cc: stable@vger.kernel.org # 2.6.37+ Fixes: 69d1b839 "ring-buffer: Bind time extend and data events together" Signed-off-by:Steven Rostedt <rostedt@goodmis.org> (cherry picked from commit 021de3d9) Signed-off-by:
-
Steven Rostedt (Red Hat) authored
When performing a consuming read, the ring buffer swaps out a page from the ring buffer with a empty page and this page that was swapped out becomes the new reader page. The reader page is owned by the reader and since it was swapped out of the ring buffer, writers do not have access to it (there's an exception to that rule, but it's out of scope for this commit). When reading the "trace" file, it is a non consuming read, which means that the data in the ring buffer will not be modified. When the trace file is opened, a ring buffer iterator is allocated and writes to the ring buffer are disabled, such that the iterator will not have issues iterating over the data. Although the ring buffer disabled writes, it does not disable other reads, or even consuming reads. If a consuming read happens, then the iterator is reset and starts reading from the beginning again. My tests would sometimes trigger this bug on my i386 box: WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa() Modules linked in: CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M Call Trace: [<c18796b3>] dump_stack+0x4b/0x75 [<c103a0e3>] warn_slowpath_common+0x7e/0x95 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c103a185>] warn_slowpath_fmt+0x33/0x35 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M [<c10bed04>] trace_find_cmdline+0x40/0x64 [<c10c3c16>] trace_print_context+0x27/0xec [<c10c4360>] ? trace_seq_printf+0x37/0x5b [<c10c0b15>] print_trace_line+0x319/0x39b [<c10ba3fb>] ? ring_buffer_read+0x47/0x50 [<c10c13b1>] s_show+0x192/0x1ab [<c10bfd9a>] ? s_next+0x5a/0x7c [<c112e76e>] seq_read+0x267/0x34c [<c1115a25>] vfs_read+0x8c/0xef [<c112e507>] ? seq_lseek+0x154/0x154 [<c1115ba2>] SyS_read+0x54/0x7f [<c188488e>] syscall_call+0x7/0xb ---[ end trace 3f507febd6b4cc83 ]--- >>>> ##### CPU 1 buffer started #### Which was the __trace_find_cmdline() function complaining about the pid in the event record being negative. After adding more test cases, this would trigger more often. Strangely enough, it would never trigger on a single test, but instead would trigger only when running all the tests. I believe that was the case because it required one of the tests to be shutting down via delayed instances while a new test started up. After spending several days debugging this, I found that it was caused by the iterator becoming corrupted. Debugging further, I found out why the iterator became corrupted. It happened with the rb_iter_reset(). As consuming reads may not read the full reader page, and only part of it, there's a "read" field to know where the last read took place. The iterator, must also start at the read position. In the rb_iter_reset() code, if the reader page was disconnected from the ring buffer, the iterator would start at the head page within the ring buffer (where writes still happen). But the mistake there was that it still used the "read" field to start the iterator on the head page, where it should always start at zero because readers never read from within the ring buffer where writes occur. I originally wrote a patch to have it set the iter->head to 0 instead of iter->head_page->read, but then I questioned why it wasn't always setting the iter to point to the reader page, as the reader page is still valid. The list_empty(reader_page->list) just means that it was successful in swapping out. But the reader_page may still have data. There was a bug report a long time ago that was not reproducible that had something about trace_pipe (consuming read) not matching trace (iterator read). This may explain why that happened. Anyway, the correct answer to this bug is to always use the reader page an not reset the iterator to inside the writable ring buffer. Cc: stable@vger.kernel.org # 2.6.28+ Fixes: d769041f "ring_buffer: implement new locking" Signed-off-by:
-
Hans de Goede authored
Link: https://bugs.freedesktop.org/show_bug.cgi?id=81515Reported-and-tested-by:
Hohahiu <rakothedin@gmail.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit 84c34858) Signed-off-by:
-
Hans de Goede authored
Some laptops have a working acpi_video backlight control, and using native backlight on these causes a regression where backlight control does not work when userspace is not handling brightness key events. Disable native_backlight on these to fix this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691Reported-and-tested-by:
Andre Müller <andre.muller@web.de> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by:
-
Jiri Kosina authored
There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by:Jiri Kosina <jkosina@suse.cz> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Lv Zheng authored
There is platform refusing to respond QR_EC when SCI_EVT isn't set which is Acer Aspire V5-573G. By disallowing QR_EC to be issued before the previous one has been completed we are able to reduce the possibilities to trigger issues on such platforms. Note that this fix can only reduce the occurrence rate of this issue, but this issue may still occur when such a platform doesn't clear SCI_EVT before or immediately after completing the previous QR_EC transaction. This patch cannot fix the CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. But this patch is still useful as it can help to reduce the number of scheduled QR_EC work items. Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611Reported-and-tested-by:
Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by:
-
Lan Tianyu authored
Currently, notify callbacks for fixed button events are run from interrupt context. That is not necessary and after commit 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) it causes netlink routines to be called from interrupt context which is not correct. Also, that is different from non-fixed device events (including non-fixed button events) whose notify callbacks are all executed from process context. For the above reasons, make fixed button device notify callbacks run in process context which will avoid the deadlock when using netlink to report button events to user space. Fixes: 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) Link: https://lkml.org/lkml/2014/8/21/606Reported-by:
Benjamin Block <bebl@mageta.org> Reported-by:
Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> [rjw: Function names, subject and changelog.] Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by:
-
David E. Box authored
Fixes a regression introduced by commit e23d9b82 (ACPICA: Namespace: Properly null terminate objects detached from a namespace node) In the case of Alias namespace nodes, the node simply points to the aliased node via the Object field; thus we cannot assume that the object is an operand object. Fixes: e23d9b82 (ACPICA: Namespace: Properly null terminate objects detached from a namespace node) Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
-
David E. Box authored
Adds return status check on copy routines to delete the allocated destination object if either copy fails. Reported by Colin Ian King on bugs.acpica.org, Bug 1087. The last applicable commit: Commit: 3371c19c Subject: ACPICA: Remove ACPI_GET_OBJECT_TYPE macro Link: https://bugs.acpica.org/show_bug.cgi?id=1087Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Sebastian Reichel authored
Move sysfs_notify and i2c_transfer calls from bq2415x_notifier_call to bq2415x_timer_work to avoid sleeping in atomic context. This fixes the following bug: [ 7.667449] Workqueue: events power_supply_changed_work [ 7.673034] [<c0015c28>] (unwind_backtrace+0x0/0xe0) from [<c0011e1c>] (show_stack+0x10/0x14) [ 7.682098] [<c0011e1c>] (show_stack+0x10/0x14) from [<c052cdd0>] (dump_stack+0x78/0xac) [ 7.690704] [<c052cdd0>] (dump_stack+0x78/0xac) from [<c052a044>] (__schedule_bug+0x48/0x60) [ 7.699645] [<c052a044>] (__schedule_bug+0x48/0x60) from [<c053071c>] (__schedule+0x74/0x638) [ 7.708618] [<c053071c>] (__schedule+0x74/0x638) from [<c05301fc>] (schedule_timeout+0x1dc/0x24c) [ 7.718017] [<c05301fc>] (schedule_timeout+0x1dc/0x24c) from [<c05316ec>] (wait_for_common+0x138/0x17c) [ 7.727966] [<c05316ec>] (wait_for_common+0x138/0x17c) from [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) [ 7.737640] [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) from [<c035d928>] (__i2c_transfer+0x40/0x74) [ 7.747039] [<c035d928>] (__i2c_transfer+0x40/0x74) from [<c035e22c>] (i2c_transfer+0x6c/0x90) [ 7.756195] [<c035e22c>] (i2c_transfer+0x6c/0x90) from [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) [ 7.765563] [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) from [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) [ 7.776824] [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) from [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) [ 7.788085] [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) from [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) [ 7.798309] [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) from [<c005f228>] (notifier_call_chain+0x38/0x68) [ 7.808715] [<c005f228>] (notifier_call_chain+0x38/0x68) from [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) [ 7.819732] [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) from [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) [ 7.831420] [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) from [<c0378078>] (power_supply_changed_work+0x6c/0xb8) [ 7.842864] [<c0378078>] (power_supply_changed_work+0x6c/0xb8) from [<c00556c0>] (process_one_work+0x248/0x440) [ 7.853546] [<c00556c0>] (process_one_work+0x248/0x440) from [<c0055d6c>] (worker_thread+0x208/0x350) [ 7.863372] [<c0055d6c>] (worker_thread+0x208/0x350) from [<c005b0ac>] (kthread+0xc8/0xdc) [ 7.872131] [<c005b0ac>] (kthread+0xc8/0xdc) from [<c000e138>] (ret_from_fork+0x14/0x3c) Fixes: 32260308 ("bq2415x_charger: Use power_supply notifier for automode") Cc: <stable@vger.kernel.org> Signed-off-by:
Sebastian Reichel <sre@kernel.org> (cherry picked from commit 3c018504) Signed-off-by:
-
Ben Hutchings authored
bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by:Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: stable@vger.kernel.org Fixes: f16a1750 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by:
-
Daniel Mack authored
This mode is unsupported, as the DMA controller can't do zero-padding of samples. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org (cherry picked from commit 9301503a) Signed-off-by:
-
Sylwester Nawrocki authored
We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Praveen Diwakar authored
Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by:
Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Qiao Zhou authored
we need to release dapm widget list after dpcm_path_get in soc_dpcm_runtime_update. otherwise, there will be potential memory leak. add dpcm_path_put to fix it. Signed-off-by:
Qiao Zhou <zhouqiao@marvell.com> Signed-off-by:
-
Markos Chandras authored
Generic code may need to perform certain operations when EVA is enabled, for example, configure the segmentation registers during boot. In order to avoid using more CONFIG_EVA ifdefs in the arch code, such functions will be added in this header instead. Initially this header contains a macro which will be used by generic code later on during VPEs configuration on secondary cores. All it does is to call the platform specific EVA init code in case EVA is enabled. Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7422/Signed-off-by:
James Hogan <james.hogan@imgtec.com> MIPS: scall64-o32: Fix indirect syscall detection Commit 4c21b8fd (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64 but it did not work as expected. The reason is the the scall64-o32 implementation differs compared to scall32-o32. In the former, the v0 (syscall number) register contains the absolute syscall number (4000 + X) whereas in the latter it contains the relative syscall number (X). Fix the code to avoid doing an extra addition, and load the v0 register directly to the first argument for syscall_trace_enter. Moreover, set the .reorder assembler option in order to have better control on this part of the assembly code. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7515/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> MIPS: NL: Fix nlm_xlp_defconfig build error The nlm_xlp_defconfig build fails with ./arch/mips/include/asm/mach-netlogic/topology.h:15:0: error: "topology_core_id" redefined [-Werror] In file included from include/linux/smp.h:59:0, [ ...] from arch/mips/mm/dma-default.c:12: ./arch/mips/include/asm/smp.h:41:0: note: this is the location of the previous definition and similar errors. This is caused by commit bda4584c ("MIPS: Support CPU topology files in sysfs") which adds the defines to arch/mips/include/asm/smp.h. Remove the defines from arch/mips/include/asm/mach-netlogic/topology.h as no longer necessary. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Huacai Chen <chenhc@lemote.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7513/Signed-off-by:
Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7511/Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7544/Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: jogo@openwrt.org Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7545/Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Huacai Chen <chenhc@lemote.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7537/Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7539/Signed-off-by:
Yang Wei <Wei.Yang@windriver.com> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@redhat.com Cc: acme@kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7506/Signed-off-by:
-
Alex Smith authored
Get rid of the WANT_COMPAT_REG_H test and instead define both the 32- and 64-bit register offset definitions at the same time with MIPS{32,64}_ prefixes, then define the existing EF_* names to the correct definitions for the kernel's bitness. This patch is a prerequisite of the following bug fix patch. Signed-off-by:Alex Smith <alex@alex-smith.me.uk> Cc: <stable@vger.kernel.org> # v3.13+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7451/Signed-off-by:
-
Huacai Chen authored
In commit 2c8c53e2 (MIPS: Optimize TLB handlers for Octeon CPUs) build_r4000_tlb_refill_handler() is modified. But it doesn't compatible with the original code in HUGETLB case. Because there is a copy & paste error and one line of code is missing. It is very easy to produce a bug with LTP's hugemmap05 test. Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Cc: <stable@vger.kernel.org> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7496/Signed-off-by:
-
Paul Burton authored
If one or more matching FCSR cause & enable bits are set in saved thread context then when that context is restored the kernel will take an FP exception. This is of course undesirable and considered an oops, leading to the kernel writing a backtrace to the console and potentially rebooting depending upon the configuration. Thus the kernel avoids this situation by clearing the cause bits of the FCSR register when handling FP exceptions and after emulating FP instructions. However the kernel does not prevent userland from setting arbitrary FCSR cause & enable bits via ptrace, using either the PTRACE_POKEUSR or PTRACE_SETFPREGS requests. This means userland can trivially cause the kernel to oops on any system with an FPU. Prevent this from happening by clearing the cause bits when writing to the saved FCSR context via ptrace. This problem appears to exist at least back to the beginning of the git era in the PTRACE_POKEUSR case. Signed-off-by:
-
Jeffrey Deans authored
A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK mapping causes the cpu parameter to gic_setup_intr() to be increased to 32, causing memory corruption when pcpu_masks[] is written to again later in the function. Signed-off-by:
Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Alex Smith <alex.smith@imgtec.com> Cc: <stable@vger.kernel.org> # v3.13+ Reviewed-by:
Aurelien Jarno <aurelien@aurel32.net> Tested-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Catalin Patulea <cat@vv.carleton.ca> Signed-off-by:
Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7184/Signed-off-by:
Emil Goode <emilgoode@gmail.com> Reviewed-by:
Jonas Gorski <jogo@openwrt.org> Acked-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7264/Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7216/Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Rob Herring <robh@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7485/Signed-off-by:
Daniel Walter <dwalter@google.com> Reviewed-by:
-
K. Y. Srinivasan authored
Going forward it is possible that some of the commands that are not currently implemented will be implemented on future Windows hosts. Even if they are not implemented, we are told the host will corrrectly handle unsupported commands (by returning appropriate return code and sense information). Make command filtering depend on the host version. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
K. Y. Srinivasan authored
On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by:
-
Andrey Utkin authored
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81631Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> (cherry picked from commit b00fc6ec) Signed-off-by:
-
