- 09 Dec, 2015 40 commits
-
-
Andrew Cooper authored
commit 581b7f15 upstream. There appears to be no formal statement of what pv_irq_ops.save_fl() is supposed to return precisely. Native returns the full flags, while lguest and Xen only return the Interrupt Flag, and both have comments by the implementations stating that only the Interrupt Flag is looked at. This may have been true when initially implemented, but no longer is. To make matters worse, the Xen PVOP leaves the upper bits undefined, making the BUG_ON() undefined behaviour. Experimentally, this now trips for 32bit PV guests on Broadwell hardware. The BUG_ON() is consistent for an individual build, but not consistent for all builds. It has also been a sitting timebomb since SMAP support was introduced. Use native_save_fl() instead, which will obtain an accurate view of the AC flag. Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Tested-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <lguest@lists.ozlabs.org> Cc: Xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1433323874-6927-1-git-send-email-andrew.cooper3@citrix.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit 04633df0 upstream. When we get loaded by a 64-bit bootloader, kernel entry point is startup_64 in head_64.S. We don't trust any and all bootloaders because some will fiddle with CPU configuration so we go ahead and massage each CPU into sanity again. For example, some dell BIOSes have this XD disable feature which set IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround for other OSes but Linux sure doesn't need it. A similar thing is present in the Surface 3 firmware - see https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit only on the BSP: # rdmsr -a 0x1a0 400850089 850089 850089 850089 I know, right?! There's not even an off switch in there. So fix all those cases by sanitizing the 64-bit entry point too. For that, make verify_cpu() callable in 64-bit mode also. Requested-and-debugged-by:
"H. Peter Anvin" <hpa@zytor.com> Reported-and-tested-by:
Bastien Nocera <bugzilla@hadess.net> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.deSigned-off-by:
-
Vitaly Kuznetsov authored
commit 8c058b0b upstream. Commit d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") brought a regression for Hyper-V Gen2 instances. These instances don't have i8259 legacy PIC but they use legacy IRQs for serial port, rtc, and acpi. With this commit included we end up with these IRQs not initialized. Earlier, there was a special workaround for legacy IRQs in mp_map_pin_to_irq() doing mp_irqdomain_map() without looking at nr_legacy_irqs() and now we fail in __irq_domain_alloc_irqs() when irq_domain_alloc_descs() returns -EEXIST. The essence of the issue seems to be that early_irq_init() calls arch_probe_nr_irqs() to figure out the number of legacy IRQs before we probe for i8259 and gets 16. Later when init_8259A() is called we switch to NULL legacy PIC and nr_legacy_irqs() starts to return 0 but we already have 16 descs allocated. Solve the issue by separating i8259 probe from init and calling it in arch_probe_nr_irqs() before we actually use nr_legacy_irqs() information. Fixes: d32932d0 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1446543614-3621-1-git-send-email-vkuznets@redhat.comSigned-off-by:
-
Krzysztof Mazur authored
commit 68accac3 upstream. The commit f5f3497c extended the low identity mapping. However, if the kernel uses more than 2 GB (VMSPLIT_2G_OPT or VMSPLIT_1G memory split), the normal memory mapping is overwritten by the low identity mapping causing a crash. To avoid overwritting, limit the low identity map to cover only memory before kernel range (PAGE_OFFSET). Fixes: f5f3497c "x86/setup: Extend low identity map to cover whole kernel range Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1446815916-22105-1-git-send-email-krzysiek@podlesie.netSigned-off-by:
-
Eric Northup authored
commit 54a20552 upstream. It was found that a guest can DoS a host by triggering an infinite stream of "alignment check" (#AC) exceptions. This causes the microcode to enter an infinite loop where the core never receives another interrupt. The host kernel panics pretty quickly due to the effects (CVE-2015-5307). Signed-off-by:
Eric Northup <digitaleric@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Laszlo Ersek authored
commit 879ae188 upstream. Commit b18d5431 ("KVM: x86: fix CR0.CD virtualization") was technically correct, but it broke OVMF guests by slowing down various parts of the firmware. Commit fb279950 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") quirked the first function modified by b18d5431, vmx_get_mt_mask(), for OVMF's sake. This restored the speed of the OVMF code that runs before PlatformPei (including the memory intensive LZMA decompression in SEC). This patch extends the quirk to the second function modified by b18d5431, kvm_set_cr0(). It eliminates the intrusive slowdown that hits the EFI_MP_SERVICES_PROTOCOL implementation of edk2's UefiCpuPkg/CpuDxe -- which is built into OVMF --, when CpuDxe starts up all APs at once for initialization, in order to count them. We also carry over the kvm_arch_has_noncoherent_dma() sub-condition from the other half of the original commit b18d5431. Fixes: b18d5431 Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Reviewed-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Tested-by:
Janusz Mocek <januszmk6@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com># Signed-off-by:
-
Paolo Bonzini authored
commit 89651a3d upstream. The SDM says that exiting system management mode from 64-bit mode is invalid, but that would be too good to be true. But actually, most of the code is already there to support exiting from compat mode (EFER.LME=1, EFER.LMA=0). Getting all the way from 64-bit mode to real mode only requires clearing CS.L and CR4.PCIDE. Fixes: 660a5d51Tested-by:
Laszlo Ersek <lersek@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
commit f40606b1 upstream. GET_SMSTATE depends on real mode to ensure that smbase+offset is treated as a physical address, which has already caused a bug after shuffling the code. Enforce physical addressing. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Reported-by:
-
Radim Krčmář authored
commit 7a036a6f upstream. We want to read the physical memory when emulating RSM. X86EMUL_IO_NEEDED is returned on all errors for consistency with other helpers. Signed-off-by:
-
Paolo Bonzini authored
commit 5690891b upstream. Not zeroing EFER means that a 32-bit firmware cannot enter paging mode without clearing EFER.LME first (which it should not know about). Yang Zhang from Intel confirmed that the manual is wrong and EFER is cleared to zero on INIT. Fixes: d28bc9dd Cc: Yang Z Zhang <yang.z.zhang@intel.com> Signed-off-by:
-
Radim Krčmář authored
commit c77f3fab upstream. After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by:
-
James Hogan authored
commit 585bb8f9 upstream. If either of the memory allocations in kvm_arch_vcpu_create() fail, the vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd in the error handling path. Add a call to kvm_vcpu_uninit() to fix this. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
-
James Hogan authored
commit c5c2a3b9 upstream. The immediate field of the CACHE instruction is signed, so ensure that it gets sign extended by casting it to an int16_t rather than just masking the low 16 bits. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
-
James Hogan authored
commit 002374f3 upstream. ASID restoration on guest resume should determine the guest execution mode based on the guest Status register rather than bit 30 of the guest PC. Fix the two places in locore.S that do this, loading the guest status from the cop0 area. Note, this assembly is specific to the trap & emulate implementation of KVM, so it doesn't need to check the supervisor bit as that mode is not implemented in the guest. Fixes: b680f70f ("KVM/MIPS32: Entry point for trampolining to...") Signed-off-by:
-
Alban Bedel authored
commit 5011a7e8 upstream. The DDR control initialization needs to know the SoC type, however ath79_detect_sys_type() was called after ath79_ddr_ctrl_init(). Reverse the order to fix the DDR control initialization on ar71xx and ar934x. Signed-off-by:
Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11500/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
commit 1b4a5ddb upstream. Add helper macro builtin_mips_cdmm_driver() for builtin CDMM drivers that don't do anything special in init and have no exit. The module_mips_cdmm_driver() helper isn't really appropriate for drivers that can't be built as a module. Signed-off-by:
-
Hauke Mehrtens authored
commit 4e7d30db upstream. This adds a basic implementation of clk_round_rate() The clk_round_rate() function is called by multiple drivers and subsystems now and the lantiq clk driver is supposed to export this, but doesn't do so, this causes linking problems like this one: ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined! Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11358/Signed-off-by:
-
Arnd Bergmann authored
commit 54c09889 upstream. The z2 machine calls pxa27x_set_pwrmode() in order to power off the machine, but this function gets discarded early at boot because it is marked __init, as pointed out by kbuild: WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode() The function z2_power_off() references the function __init pxa27x_set_pwrmode(). This is often because z2_power_off lacks a __init annotation or the annotation of pxa27x_set_pwrmode is wrong. This removes the __init section modifier to fix rebooting and the build error. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: ba4a90a6 ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Chen-Yu Tsai authored
commit 976d84fc upstream. The VDD-CPU and VDD-GPU regulators were incorrectly swapped. Fixes: bab03561 ("ARM: dts: sun6i: hummingbird: Add AXP221 regulator nodes") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Tony Lindgren authored
commit 0efc898a upstream. Commit 99f84cae ("ARM: dts: add wl12xx/wl18xx bindings") added device tree bindings for the TI WLAN SDIO on many omap variants. I recall wondering how come omap5-uevm did not have the WLAN added and this issue has been bugging me for a while now, and I finally tracked it down to a bad pinmux regression, and a missing deferred probe handling for the 32k clock from palmas that's requested by twl6040. Basically 392adaf7 ("ARM: dts: omap5-evm: Add mcspi data") added pin muxing for mcspi4 that conflicts with the onboard WLAN. While some omap5-uevm don't have WLAN populated, the pins are not reused for other devices. And as the SDIO bus should be probed, let's try to enable WLAN by default. Let's fix the regression and add the WLAN configuration as done for the other boards in 99f84cae ("ARM: dts: add wl12xx/wl18xx bindings"). And let's use the new MMC pwrseq for the 32k clock as suggested by Javier Martinez Canillas <javier@dowhile0.org>. Note that without a related deferred probe fix for twl6040, the 32k clock is not initialized if palmas-clk is a module and twl6040 is built-in. Let's also use the generic "non-removable" instead of the legacy "ti,non-removable" property while at it. And finally, note that omap5 seems to require WAKEUP_EN for the WLAN GPIO interrupt. Fixes: 392adaf7 ("ARM: dts: omap5-evm: Add mcspi data") Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Marek Szyprowski authored
commit 4ae9a4c6 upstream. Exynos USB2 PHY driver now supports VBUS regulator, so add it to all boards which have it available. This also fixes commit 7eec1266 ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2"), which added new regulators to Trats2 board, but without linking them to the consumers. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 7eec1266 ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Patrick Doyle authored
commit 5fcf8d1a upstream. fncpy() requires that the source and the destination are both 8-byte aligned. Signed-off-by:
Patrick Doyle <pdoyle@irobot.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: d94e688c ("ARM: at91/pm: move the copying the sram function to the sram initialization phase") Signed-off-by:
-
Holger Busse authored
commit d1a9c24a upstream. Correcting the dma declaration for i2c1 dma. Signed-off-by:
Holger Busse <h.busse@kathrein-sachsen.de> Signed-off-by:
-
Dmitry Osipenko authored
commit e77b675f upstream. Commit 72daceb9 ("net: rfkill: gpio: Add default GPIO driver mappings for ACPI") removed possibility to request GPIO by table index for non-ACPI platforms without changing its users. As result "shutdown" GPIO request will fail if request for "reset" GPIO succeeded or "reset" will be requested instead of "shutdown" if "reset" wasn't defined. Fix it by making gpiod_lookup_table use con_id's instead of indexes. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Fixes: 72daceb9 (net: rfkill: gpio: Add default GPIO driver mappings for ACPI) Acked-by:
Alexandre Courbot <acourbot@nvidia.com> Reviewed-by:
Marc Dietrich <marvin24@gmx.de> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Peter Chen authored
commit facf47ee upstream. For imx27, it needs three clocks to let the controller work, the old code is wrong, and usbmisc has not included clock handling code any more. Without this patch, it will cause below data abort when accessing usbmisc registers. usbcore: registered new interface driver usb-storage Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600 pgd = c0004000 [f4424600] *pgd=10000452(bad) Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089 Hardware name: Freescale i.MX27 (Device Tree Support) task: c7832b60 ti: c783e000 task.ti: c783e000 PC is at usbmisc_imx27_init+0x4c/0xbc LR is at usbmisc_imx27_init+0x40/0xbc pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093 sp : c783fe08 ip : 00000000 fp : 00000000 r10: c0576434 r9 : 0000009c r8 : c7a773a0 r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0 r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc783e190) Stack: (0xc783fe08 to 0xc7840000) Signed-off-by:
Peter Chen <peter.chen@freescale.com> Reported-by:
Fabio Estevam <fabio.estevam@freescale.com> Tested-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
commit 696d8b70 upstream. In case when the interrupt happened for the second eDMA the channel number was incorrectly passed to the client driver. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Marek Szyprowski authored
commit 7e312103 upstream. IOMMU-based dma_mmap() implementation lacked proper support for offset parameter used in mmap call (it always assumed that mapping starts from offset zero). This patch adds support for offset parameter to IOMMU-based implementation. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Marek Szyprowski authored
commit 371f0f08 upstream. dma_mmap() function in IOMMU-based dma-mapping implementation lacked a check for valid range of mmap parameters (offset and buffer size), what might have caused access beyond the allocated buffer. This patch fixes this issue. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d69bbf88 ] Only cpu seeing dst refcount going to 0 can safely dereference dst->flags. Otherwise an other cpu might already have freed the dst. Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jay Vosburgh authored
[ Upstream commit 40baec22 ] Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Francesco Ruggeri authored
[ Upstream commit 30f7ea1c ] There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
Tobias Klauser authored
[ Upstream commit f63ce5b6 ] In tun_dst_unclone() the return value of skb_metadata_dst() is checked for being NULL after it is dereferenced. Fix this by moving the dereference after the NULL check. Found by the Coverity scanner (CID 1338068). Fixes: fc4099f1 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
David Ahern authored
[ Upstream commit e1b8d903 ] A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8 changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8 ("net: Add routes to the table associated with the device") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 4ee3bd4a ] This fixes the following lockdep warning: [ INFO: inconsistent lock state ] 4.3.0-rc7+ #1197 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a {IN-SOFTIRQ-R} state was registered at: [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0 [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4 [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116 [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5 [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465 [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633 [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e [<ffffffff8195bfef>] ip6_output+0x91/0xe5 [<ffffffff819792ae>] dst_output_sk+0x47/0x4c [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82 [<ffffffff8197981e>] mld_sendpack+0x189/0x266 [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223 [<ffffffff810de581>] call_timer_fn+0xfb/0x28c [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1 Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 2a189f9e ] In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up the dev_snmp6 entry that we have already registered for this device. Call snmp6_unregister_dev in this case. Fixes: a317a2f1 ("ipv6: fail early when creating netdev named all or default") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8fa677d2 ] Under low memory conditions, tcp_sk_init() and icmp_sk_init() can both iterate on all possible cpus and call inet_ctl_sock_destroy(), with eventual NULL pointer. Signed-off-by:
-
Martin Habets authored
[ Upstream commit b2663a4f ] When the IP stack passes SKBs the sfc driver puts them in 2 different TX queues (called partners), one for checksummed and one for not checksummed. If the SKB has xmit_more set the driver will delay pushing the work to the NIC. When later it does decide to push the buffers this patch ensures it also pushes the partner queue, if that also has any delayed work. Before this fix the work in the partner queue would be left for a long time and cause a netdev watchdog. Fixes: 70b33fb0 ("sfc: add support for skb->xmit_more") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4ece9009 ] sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aa ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by:
-
Ani Sinha authored
[ Upstream commit 44f49dd8 ] Fixes the following kernel BUG : BUG: using __this_cpu_add() in preemptible [00000000] code: bash/2758 caller is __this_cpu_preempt_check+0x13/0x15 CPU: 0 PID: 2758 Comm: bash Tainted: P O 3.18.19 #2 ffffffff8170eaca ffff880110d1b788 ffffffff81482b2a 0000000000000000 0000000000000000 ffff880110d1b7b8 ffffffff812010ae ffff880007cab800 ffff88001a060800 ffff88013a899108 ffff880108b84240 ffff880110d1b7c8 Call Trace: [<ffffffff81482b2a>] dump_stack+0x52/0x80 [<ffffffff812010ae>] check_preemption_disabled+0xce/0xe1 [<ffffffff812010d4>] __this_cpu_preempt_check+0x13/0x15 [<ffffffff81419d60>] ipmr_queue_xmit+0x647/0x70c [<ffffffff8141a154>] ip_mr_forward+0x32f/0x34e [<ffffffff8141af76>] ip_mroute_setsockopt+0xe03/0x108c [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810e6974>] ? pollwake+0x4d/0x51 [<ffffffff81058ac0>] ? default_wake_function+0x0/0xf [<ffffffff810553fc>] ? get_parent_ip+0x11/0x42 [<ffffffff810613d9>] ? __wake_up_common+0x45/0x77 [<ffffffff81486ea9>] ? _raw_spin_unlock_irqrestore+0x1d/0x32 [<ffffffff810618bc>] ? __wake_up_sync_key+0x4a/0x53 [<ffffffff8139a519>] ? sock_def_readable+0x71/0x75 [<ffffffff813dd226>] do_ip_setsockopt+0x9d/0xb55 [<ffffffff81429818>] ? unix_seqpacket_sendmsg+0x3f/0x41 [<ffffffff813963fe>] ? sock_sendmsg+0x6d/0x86 [<ffffffff813959d4>] ? sockfd_lookup_light+0x12/0x5d [<ffffffff8139650a>] ? SyS_sendto+0xf3/0x11b [<ffffffff810d5738>] ? new_sync_read+0x82/0xaa [<ffffffff813ddd19>] compat_ip_setsockopt+0x3b/0x99 [<ffffffff813fb24a>] compat_raw_setsockopt+0x11/0x32 [<ffffffff81399052>] compat_sock_common_setsockopt+0x18/0x1f [<ffffffff813c4d05>] compat_SyS_setsockopt+0x1a9/0x1cf [<ffffffff813c4149>] compat_SyS_socketcall+0x180/0x1e3 [<ffffffff81488ea1>] cstar_dispatch+0x7/0x1e Signed-off-by:
Ani Sinha <ani@arista.com> Acked-by:
-
Phil Reid authored
[ Upstream commit e6dbe1eb ] priv->hwts_*_en indicate if timestamping is enabled/disabled at run time. But priv->dma_cap.time_stamp and priv->dma_cap.atime_stamp indicates HW is support for PTPv1/PTPv2. Signed-off-by:
Phil Reid <preid@electromag.com.au> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
