- 16 Nov, 2017 40 commits
-
-
Taeung Song authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 75fc5ae5 ] Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1485952447-7013-2-git-send-email-treeze.taeung@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
Rex Zhu authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 28ed5504 ] Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Chris Brandt authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 71ccea09 ] This fixes the condition where the controller has not fully completed its final transfer and leaves the bus and controller in a undesirable state. At the end of the last transmitted byte, the existing driver would just signal for a STOP condition to be transmitted then immediately signal completion. However, the full STOP procedure might not have fully taken place by the time the runtime PM shuts off the peripheral clock, leaving the bus in a suspended state. Alternatively, the STOP condition on the bus may have completed, but when the next transaction is requested by the upper layer, not all the necessary register cleanup was finished from the last transfer which made the driver return BUS BUSY when it really wasn't. This patch now makes all transmit and receive transactions wait for the STOP condition to fully complete before signaling a completed transaction. With this new method, runtime PM no longer seems to be an issue. Fixes: 310c18a4 ("i2c: riic: add driver") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 5469d7c3 ] Avoid using stripe_width for sbi->s_stripe value if it is not actually set. It prevents using the stride for sbi->s_stripe. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit d9b22cf9 ] When a filesystem is created using: mkfs.ext4 -b 4096 -E stride=512 <dev> and we try to allocate 64MB extent, we will end up directly in ext4_mb_complex_scan_group(). This is because the request is detected as power-of-two allocation (so we start in ext4_mb_regular_allocator() with ac_criteria == 0) however the check before ext4_mb_simple_scan_group() refuses the direct buddy scan because the allocation request is too large. Since cr == 0, the check whether we should use ext4_mb_scan_aligned() fails as well and we fall back to ext4_mb_complex_scan_group(). Fix the problem by checking for upper limit on power-of-two requests directly when detecting them. Reported-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Larry Finger authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 221c46d2 ] The headers describing a number of network packets do not have the correct endian settings for several types of data. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Hans de Goede authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 1af468eb ] The R in PEK_DBR stands for rising, so it should be mapped to AXP288_IRQ_POKP where the last P stands for positive edge. Likewise PEK_DBF should be mapped to the falling edge, aka the _N_egative edge, so it should be mapped to AXP288_IRQ_POKN. This fixes the inverted powerbutton status reporting by the axp20x-pek driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Linus Walleij authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 7e9c40c6 ] In the current boot, clients making use of the AB8500 sysctrl may be probed before the ab8500-sysctrl driver. This gives them -EINVAL, but should rather give -EPROBE_DEFER. Before this, the abx500 clock driver didn't probe properly, and as a result the codec driver in turn using the clocks did not probe properly. After this patch, everything probes properly. Also add OF compatible-string probing. This driver is all device tree, so let's just make a drive-by-fix of that as well. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ulf Hansson authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 40d727a2 ] Some of the pxa platforms, balloon3, colibri-pxa270-income, corgi, trizeps4, vpac270, zeus and zylonite depends on leds.h. Explicitly include it instead of relying on the public mmc header host.h. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit e1c6ec26 ] I got this new build error on today's linux-next drivers/mmc/host/s3cmci.h:69:24: error: field 'pio_tasklet' has incomplete type struct tasklet_struct pio_tasklet; drivers/mmc/host/s3cmci.c: In function 's3cmci_enable_irq': drivers/mmc/host/s3cmci.c:390:4: error: implicit declaration of function 'enable_irq';did you mean 'enable_imask'? [-Werror=implicit-function-declaration] While I haven't found out why this happened now and not earlier, the solution is obvious, we should include the header that defines the structure. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Grygorii Strashko authored
BugLink: http://bugs.launchpad.net/bugs/1731915 [ Upstream commit 09bb6e93 ] There are two reasons for reporting wakeup event when dedicated wakeup IRQ is triggered: - wakeup events accounting, so proper statistical data will be displayed in sysfs and debugfs; - there are small window when System is entering suspend during which dedicated wakeup IRQ can be lost: dpm_suspend_noirq() |- device_wakeup_arm_wake_irqs() |- dev_pm_arm_wake_irq(X) |- IRQ is enabled and marked as wakeup source [1]... |- suspend_device_irqs() |- suspend_device_irq(X) |- irqd_set(X, IRQD_WAKEUP_ARMED); |- wakup IRQ armed The wakeup IRQ can be lost if it's triggered at point [1] and not armed yet. Hence, fix above cases by adding simple pm_wakeup_event() call in handle_threaded_wake_irq(). Fixes: 4990d4fe (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Keerthy <j-keerthy@ti.com> [ tony@atomide.com: added missing return to avoid warnings ] Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit a0cb2b5c upstream. Commit 6575257c ("tracing/samples: Fix creation and deletion of simple_thread_fn creation") introduced a new warning due to using a boolean as a counter. Just make it "int". Fixes: 6575257c ("tracing/samples: Fix creation and deletion of simple_thread_fn creation") Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 6575257c upstream. Commit 7496946a ("tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()") added template examples for all the events. It created a DEFINE_EVENT_FN() example which reused the foo_bar_reg and foo_bar_unreg functions. Enabling both the TRACE_EVENT_FN() and DEFINE_EVENT_FN() example trace events caused the foo_bar_reg to be called twice, creating the test thread twice. The foo_bar_unreg would remove it only once, even if it was called multiple times, leaving a thread existing when the module is unloaded, causing an oops. Add a ref count and allow foo_bar_reg() and foo_bar_unreg() be called by multiple trace events. Fixes: 7496946a ("tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 65e93108 upstream. We recently added an integer overflow check but it needs an additional tweak to work properly on 32 bit systems. The problem is that we're doing the right hand side of the assignment as type unsigned long so the max it will have an integer overflow instead of being larger than SIZE_MAX. That means the "sz > SIZE_MAX" condition is never true even on 32 bit systems. We need to first cast it to u64 and then do the math. Fixes: 4a630fad ("drm/msm: Fix potential buffer overflow issue") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Kasin Li authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 4a630fad upstream. In function submit_create, if nr_cmds or nr_bos is assigned with negative value, the allocated buffer may be small than intended. Using this buffer will lead to buffer overflow issue. Signed-off-by:
Kasin Li <donglil@codeaurora.org> Signed-off-by:
-
Namhyung Kim authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit b581c01f upstream. On my Archlinux machine, perf faild to build like below: CC scripts/perl/Perf-Trace-Util/Context.o In file included from /usr/lib/perl5/core/perl/CORE/perl.h:3905:0, from Context.xs:23: /usr/lib/perl5/core/perl/CORE/inline.h: In function : /usr/lib/perl5/core/perl/CORE/cop.h:612:13: warning: declaration of 'av' shadows a previous local [-Werror-shadow] AV *av =3D GvAV(PL_defgv); ^ /usr/lib/perl5/core/perl/CORE/inline.h:526:5: note: in expansion of macro 'CX_POP_SAVEARRAY' CX_POP_SAVEARRAY(cx); ^~~~~~~~~~~~~~~~ In file included from /usr/lib/perl5/core/perl/CORE/perl.h:5853:0, from Context.xs:23: /usr/lib/perl5/core/perl/CORE/inline.h:518:9: note: shadowed declaration is here AV *av; ^~ What I did to fix is adding '-Wno-shadow' as the error message said it's the cause of the failure. Since it's from the perl (not perf) code base, we don't have the control so I just wanted to ignore the warning when compiling perl scripting code. Committer note: This also fixes the build on Fedora Rawhide. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Ashish Samant authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 105ddc93 upstream. The first cluster group descriptor is not stored at the start of the group but at an offset from the start. We need to take this into account while doing fstrim on the first cluster group. Otherwise we will wrongly start fstrim a few blocks after the desired start block and the range can cross over into the next cluster group and zero out the group descriptor there. This can cause filesytem corruption that cannot be fixed by fsck. Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 1cce91df upstream. The asm-generic/unaligned.h header provides two different implementations for accessing unaligned variables: the access_ok.h version used when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set pretends that all pointers are in fact aligned, while the le_struct.h version convinces gcc that the alignment of a pointer is '1', to make it issue the correct load/store instructions depending on the architecture flags. On ARMv5 and older, we always use the second version, to let the compiler use byte accesses. On ARMv6 and newer, we currently use the access_ok.h version, so the compiler can use any instruction including stm/ldm and ldrd/strd that will cause an alignment trap. This trap can significantly impact performance when we have to do a lot of fixups and, worse, has led to crashes in the LZ4 decompressor code that does not have a trap handler. This adds an ARM specific version of asm/unaligned.h that uses the le_struct.h/be_struct.h implementation unconditionally. This should lead to essentially the same code on ARMv6+ as before, with the exception of using regular load/store instructions instead of the trapping instructions multi-register variants. The crash in the LZ4 decompressor code was probably introduced by the patch replacing the LZ4 implementation, commit 4e1a33b1 ("lib: update LZ4 compressor module"), so linux-4.11 and higher would be affected most. However, we probably want to have this backported to all older stable kernels as well, to help with the performance issues. There are two follow-ups that I think we should also work on, but not backport to stable kernels, first to change the asm-generic version of the header to remove the ARM special case, and second to review all other uses of CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to see if they might be affected by the same problem on ARM. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Yan Markman authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit cda80a82 upstream. Under heavy system stress mvebu SoC using Cortex A9 sporadically encountered instability issues. The "double linefill" feature of L2 cache was identified as causing dependency between read and write which lead to the deadlock. Especially, it was the cause of deadlock seen under heavy PCIe traffic, as this dependency violates PCIE overtaking rule. Fixes: c8f5a878 ("ARM: mvebu: use DT properties to fine-tune the L2 configuration") Signed-off-by:
Yan Markman <ymarkman@marvell.com> Signed-off-by:
Igal Liberman <igall@marvell.com> Signed-off-by:
Nadav Haklai <nadavh@marvell.com> [gregory.clement@free-electrons.com: reformulate commit log, add Armada 375 and add Fixes tag] Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Mark Rutland authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 7a7003b1 upstream. It's possible for a user to deliberately trigger __dump_instr with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. Where we use __dump_instr() on kernel text, we already switch to KERNEL_DS, so this shouldn't adversely affect those cases. Fixes: 60ffc30d ("arm64: Exception handling") Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Ricard Wanderlof authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 1e6f4fc0 upstream. The ADC in the ADAU1361 (and possibly other Analog Devices codecs) exhibits a cyclic variation in the noise floor (in our test setup between -87 and -93 dB), a new value being attained within this range whenever a new capture stream is started. The cycle repeats after about 10 or 11 restarts. The workaround recommended by the manufacturer is to toggle the ADOSR bit in the Converter Control 0 register each time a new capture stream is started. I have verified that the patch fixes this problem on the ADAU1361, and according to the manufacturer toggling the bit in question in this manner will at least have no detrimental effect on other chips served by this driver. Signed-off-by:
Ricard Wanderlof <ricardw@axis.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 2eb9eabf upstream. syzkaller with KASAN reported an out-of-bounds read in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y: keyctl add asymmetric desc $'\x30\x30' @s The bug is that the length of an ASN.1 data value isn't validated in the case where it is encoded using the short form, causing the decoder to read past the end of the input buffer. Fix it by validating the length. The bug report was: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818 CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xb3/0x10b lib/dump_stack.c:52 print_address_description+0x79/0x2a0 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x236/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x347/0xb20 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x447c89 RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89 RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5 RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 3239b6f2 upstream. Commit e645016a ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016a ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ronnie Sahlberg authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit f74bc7c6 upstream. And fix tcon leak in error path. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
David Disseldorp <ddiss@samba.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 1f20f9ff upstream. syzkaller reported the lockdep splat due to the possible deadlock of grp->list_mutex of each sequencer client object. Actually this is rather a false-positive report due to the missing nested lock annotations. The sequencer client may deliver the event directly to another client which takes another own lock. For addressing this issue, this patch replaces the simple down_read() with down_read_nested(). As a lock subclass, the already existing "hop" can be re-used, which indicates the depth of the call. Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.comReported-by:
syzbot <bot+7feb8de6b4d6bf810cf098bef942cc387e79d0ad@syzkaller.appspotmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1731915 commit 79fb0518 upstream. The races among ioctl and other operations were protected by the commit af368027 ("ALSA: timer: Fix race among timer ioctls") and later fixes, but one code path was forgotten in the scenario: the 32bit compat ioctl. As syzkaller recently spotted, a very similar use-after-free may happen with the combination of compat ioctls. The fix is simply to apply the same ioctl_lock to the compat_ioctl callback, too. Fixes: af368027 ("ALSA: timer: Fix race among timer ioctls") Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.comReported-by:
syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da@syzkaller.appspotmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1731882Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1731882 This reverts commit 11bf4a8e which is commit 2e644be3 upstream. Ben pointed out that there is no driver or device trees referencing this device in 4.4-stable, so the patch should not be present there. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit f66665c0 upstream. In eCryptfs, we failed to verify that the authentication token keys are not revoked before dereferencing their payloads, which is problematic because the payload of a revoked key is NULL. request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire the key semaphore. Fix it by updating ecryptfs_get_key_payload_data() to return -EKEYREVOKED if the key payload is NULL. For completeness we check this for "encrypted" keys as well as "user" keys, although encrypted keys cannot be revoked currently. Alternatively we could use key_validate(), but since we'll also need to fix ecryptfs_get_key_payload_data() to validate the payload length, it seems appropriate to just check the payload pointer. Fixes: 237fead6 ("[PATCH] ecryptfs: fs/Makefile and fs/Kconfig") Reviewed-by:
-
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 723f2828 upstream. Blacklist Broadwell X model 79 for late loading due to an erratum. Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Guillaume Tucker authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit fc1111b8 upstream. The device tree nodes all correctly describe the regulators as syr827 or syr828, but the I2C device id is currently set to the wildcard value of syr82x in the driver. This causes udev to fail to match the driver module with the modalias data from sysfs. Fix this by replacing the I2C device ids with ones that match the device tree descriptions, with syr827 and syr828. Tested on Firefly rk3288 board. The syr82x id was not used anywhere. Fixes: e80c47bd (regulator: fan53555: Export I2C module alias information) Signed-off-by:
Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by:
-
Jimmy Assarsson authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit e1d2d132 upstream. To avoid kernel warning "Unhandled message (68)", ignore the CMD_FLUSH_QUEUE_REPLY message for now. As of Leaf v2 firmware version v4.1.844 (2017-02-15), flush tx queue is synchronous. There is a capability bit indicating whether flushing tx queue is synchronous or asynchronous. A proper solution would be to query the device for capabilities. If the synchronous tx flush capability bit is set, we should wait for CMD_FLUSH_QUEUE_REPLY message, while flushing the tx queue. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Jimmy Assarsson authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 8f65a923 upstream. If the return value from kvaser_usb_send_simple_msg() was non-zero, the return value from kvaser_usb_flush_queue() was printed in the kernel warning. Signed-off-by:
-
Gerhard Bertelsmann authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 3a379f5b upstream. Fix loopback mode by setting the right flag and remove presume mode. Signed-off-by:
Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 587c3c9f upstream. Commit 109bade9 ("scsi: sg: use standard lists for sg_requests") introduced an off-by-one error in sg_ioctl(), which was fixed by commit bd46fc40 ("scsi: sg: off by one in sg_ioctl()"). Unfortunately commit 4759df90 ("scsi: sg: factor out sg_fill_request_table()") moved that code, and reintroduced the bug (perhaps due to a botched rebase). Fix it again. Fixes: 4759df90 ("scsi: sg: factor out sg_fill_request_table()") Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Steffen Maier authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit ab31fd0c upstream. v4.10 commit 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery") extended accessing parent pointer fields of struct zfcp_erp_action for tracing. If an erp_action has never been enqueued before, these parent pointer fields are uninitialized and NULL. Examples are zfcp objects freshly added to the parent object's children list, before enqueueing their first recovery subsequently. In zfcp_erp_try_rport_unblock(), we iterate such list. Accessing erp_action fields can cause a NULL pointer dereference. Since the kernel can read from lowcore on s390, it does not immediately cause a kernel page fault. Instead it can cause hangs on trying to acquire the wrong erp_action->adapter->dbf->rec_lock in zfcp_dbf_rec_action_lvl() ^bogus^ while holding already other locks with IRQs disabled. Real life example from attaching lots of LUNs in parallel on many CPUs: crash> bt 17723 PID: 17723 TASK: ... CPU: 25 COMMAND: "zfcperp0.0.1800" LOWCORE INFO: -psw : 0x0404300180000000 0x000000000038e424 -function : _raw_spin_lock_wait_flags at 38e424 ... #0 [fdde8fc90] zfcp_dbf_rec_action_lvl at 3e0004e9862 [zfcp] #1 [fdde8fce8] zfcp_erp_try_rport_unblock at 3e0004dfddc [zfcp] #2 [fdde8fd38] zfcp_erp_strategy at 3e0004e0234 [zfcp] #3 [fdde8fda8] zfcp_erp_thread at 3e0004e0a12 [zfcp] #4 [fdde8fe60] kthread at 173550 #5 [fdde8feb8] kernel_thread_starter at 10add2 zfcp_adapter zfcp_port zfcp_unit <address>, 0x404040d600000000 scsi_device NULL, returning early! zfcp_scsi_dev.status = 0x40000000 0x40000000 ZFCP_STATUS_COMMON_RUNNING crash> zfcp_unit <address> struct zfcp_unit { erp_action = { adapter = 0x0, port = 0x0, unit = 0x0, }, } zfcp_erp_action is always fully embedded into its container object. Such container object is never moved in its object tree (only add or delete). Hence, erp_action parent pointers can never change. To fix the issue, initialize the erp_action parent pointers before adding the erp_action container to any list and thus before it becomes accessible from outside of its initializing function. In order to also close the time window between zfcp_erp_setup_act() memsetting the entire erp_action to zero and setting the parent pointers again, drop the memset and instead explicitly initialize individually all erp_action fields except for parent pointers. To be extra careful not to introduce any other unintended side effect, even keep zeroing the erp_action fields for list and timer. Also double-check with WARN_ON_ONCE that erp_action parent pointers never change, so we get to know when we would deviate from previous behavior. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery") Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
-
David Howells authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit ea678998 upstream. This fixes CVE-2017-12193. Fix a case in the assoc_array implementation in which a new leaf is added that needs to go into a node that happens to be full, where the existing leaves in that node cluster together at that level to the exclusion of new leaf. What needs to happen is that the existing leaves get moved out to a new node, N1, at level + 1 and the existing node needs replacing with one, N0, that has pointers to the new leaf and to N1. The code that tries to do this gets this wrong in two ways: (1) The pointer that should've pointed from N0 to N1 is set to point recursively to N0 instead. (2) The backpointer from N0 needs to be set correctly in the case N0 is either the root node or reached through a shortcut. Fix this by removing this path and using the split_node path instead, which achieves the same end, but in a more general way (thanks to Eric Biggers for spotting the redundancy). The problem manifests itself as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: assoc_array_apply_edit+0x59/0xe5 Fixes: 3cb98950 ("Add a generic associative array implementation.") Reported-and-tested-by:
WU Fan <u3536072@connect.hku.hk> Signed-off-by:
-
Dmitry Torokhov authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit a5082947 upstream. parse_hid_report_descriptor() has a while (i < length) loop, which only guarantees that there's at least 1 byte in the buffer, but the loop body can read multiple bytes which causes out-of-bounds access. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 57a95b41 upstream. ELAN0611 touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-15IKB. So add it to ACPI table to enable the touchpad. [Ido Adiv <idoad123@gmail.com> reports that the same ACPI ID is used for Elan touchpad in ideapad 520]. BugLink: https://bugs.launchpad.net/bugs/1723736Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Juergen Gross authored
BugLink: http://bugs.launchpad.net/bugs/1731882 commit 298d275d upstream. In case gntdev_mmap() succeeds only partially in mapping grant pages it will leave some vital information uninitialized needed later for cleanup. This will lead to an out of bounds array access when unmapping the already mapped pages. So just initialize the data needed for unmapping the pages a little bit earlier. Reported-by:
Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
