- 09 Mar, 2018 21 commits
-
-
Helge Deller authored
commit 5ffa8518 upstream. When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lingutla Chandrasekhar authored
commit c52232a4 upstream. On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a live CPU. This happens from the control thread which initiated the unplug. If the CPU on which the control thread runs came out from a longer idle period then the base clock of that CPU might be stale because the control thread runs prior to any event which forwards the clock. In such a case the timers from the unplugged CPU are queued on the live CPU based on the stale clock which can cause large delays due to increased granularity of the outer timer wheels which are far away from base:;clock. But there is a worse problem than that. The following sequence of events illustrates it: - CPU0 timer1 is queued expires = 59969 and base->clk = 59131. The timer is queued at wheel level 2, with resulting expiry time = 60032 (due to level granularity). - CPU1 enters idle @60007, with next timer expiry @60020. - CPU0 is hotplugged at @60009 - CPU1 exits idle and runs the control thread which migrates the timers from CPU0 timer1 is now queued in level 0 for immediate handling in the next softirq because the requested expiry time 59969 is before CPU1 base->clk 60007 - CPU1 runs code which forwards the base clock which succeeds because the next expiring timer. which was collected at idle entry time is still set to 60020. So it forwards beyond 60007 and therefore misses to expire the migrated timer1. That timer gets expired when the wheel wraps around again, which takes between 63 and 630ms depending on the HZ setting. Address both problems by invoking forward_timer_base() for the control CPUs timer base. All other places, which might run into a similar problem (mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid that. [ tglx: Massaged comment and changelog ] Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Co-developed-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by:
Lingutla Chandrasekhar <clingutla@codeaurora.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-arm-msm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.orgSigned-off-by:
-
Shawn Lin authored
commit 0d84b9e5 upstream. Add num_caps field for dw_mci_drv_data to validate the controller id from DT alias and non-DT ways. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Fixes: 800d78bf ("mmc: dw_mmc: add support for implementation specific callbacks") Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shawn Lin authored
commit a4faa492 upstream. Factor out dw_mci_init_slot_caps to consolidate parsing all differents types of capabilities from host contrllers. No functional change intended. Signed-off-by:
-
Shawn Lin authored
commit 5b43df8b upstream. cat /sys/kernel/debug/mmc0/regs will hang up the system since it's in runtime suspended state, so the genpd and biu_clk is off. This patch fixes this problem by calling pm_runtime_get_sync to wake it up before reading the registers. Fixes: e9ed8835 ("mmc: dw_mmc: add runtime PM callback") Cc: <stable@vger.kernel.org> Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 325501d9 upstream. The hs_timing_cfg[] array is indexed using a value derived from the "mshcN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 361c7fe9 ("mmc: dw_mmc-k3: add sd support for hi3660") Signed-off-by:
-
Adrian Hunter authored
commit f8870ae6 upstream. Tuning can leave the IP in an active state (Buffer Read Enable bit set) which prevents the entry to low power states (i.e. S0i3). Data reset will clear it. Generally tuning is followed by a data transfer which will anyway sort out the state, so it is rare that S0i3 is actually prevented. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 71db96dd upstream. We've added a quirk to enable the recent Lenovo dock support, where it overwrites the pin configs of NID 0x17 and 19, not only updating the pin config cache. It works right after the boot, but the problem is that the pin configs are occasionally cleared when the machine goes to PM. Meanwhile the quirk writes the pin configs only at the pre-probe, so this won't be applied any longer. For addressing that issue, this patch moves the code to overwrite the pin configs into HDA_FIXUP_ACT_INIT section so that it's always applied at both probe and resume time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161 Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hans de Goede authored
commit 1ba8f9d3 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 35014406 upstream. The commit change for supporting the multiple ports moved involved some code shuffling, and there the initializations of spinlock and mutex in snd_intelhad object were dropped mistakenly. This patch adds the missing initializations again for each port. Fixes: b4eb0d52 ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Richard Fitzgerald authored
commit 5a23699a upstream. The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations" introduced a potential for kernel memory corruption due to an incorrect if statement allowing non-readable controls to fall through and call the get function. For TLV controls a driver can omit SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function can be called. Instead the normal get() can be invoked unexpectedly and as the driver expects that this will only be called for controls <= 512 bytes, potentially try to copy >512 bytes into the 512 byte return array, so corrupting kernel memory. The problem is an attempt to refactor the snd_ctl_elem_read function to invert the logic so that it conditionally aborted if the control is unreadable instead of conditionally executing. But the if statement wasn't inverted correctly. The correct inversion of if (a && !b) is if (!a || b) Fixes: becf9e5d ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations") Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Erik Veijola authored
commit 240a8af9 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by:
Erik Veijola <erik.veijola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alexander Steffen authored
commit 6b3a1317 upstream. The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe. This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe buffer and copy the data to/from it. The buffer needs to be allocated separately, to ensure that it is cacheline-aligned and not shared with other data, so that DMA can work correctly. Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy") Cc: stable@vger.kernel.org Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by:
-
Arnd Bergmann authored
commit c37fbc09 upstream. Making cmd_getticks 'const' introduced a couple of harmless warnings: drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm': drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] rc = tpm_tis_send_data(chip, cmd_getticks, len); drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] rc = tpm_tis_send_data(chip, cmd_getticks, len); drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}' static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len) This changes the related functions to all take 'const' pointers so that gcc can see this as being correct. I had to slightly modify the logic around tpm_tis_spi_transfer() for this to work without introducing ugly casts. Cc: stable@vger.kernel.org Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Jeremy Boone authored
commit 6bb320ca upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
Jeremy Boone <jeremy.boone@nccgroup.trust> Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Jeremy Boone authored
commit f9d4d9b5 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Jeremy Boone authored
commit 9b8cb28d upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Jeremy Boone authored
commit 3be23274 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. If a bit does flip it could cause an overrun if it's in one of the size parameters, so sanity check that we're not overrunning the provided buffer when doing a memcpy(). Signed-off-by:
-
Jeremy Boone authored
commit 6d24cd18 upstream. Discrete TPMs are often connected over slow serial buses which, on some platforms, can have glitches causing bit flips. In all the driver _recv() functions, we need to use a u32 to unmarshal the response size, otherwise a bit flip of the 31st bit would cause the expected variable to go negative, which would then try to read a huge amount of data. Also sanity check that the expected amount of data is large enough for the TPM header. Signed-off-by:
-
Emil Tantilov authored
commit 0c5661ec upstream. Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by:
Ambarish Soman <asoman@redhat.com> Suggested-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans de Goede authored
commit 1fdb9269 upstream. Commit 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-and-tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 03 Mar, 2018 19 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Pirko authored
commit df45bf84 upstream. Since the block is freed with last chain being put, once we reach the end of iteration of list_for_each_entry_safe, the block may be already freed. I'm hitting this only by creating and deleting clsact: [ 202.171952] ================================================================== [ 202.180182] BUG: KASAN: use-after-free in tcf_block_put_ext+0x240/0x390 [ 202.187590] Read of size 8 at addr ffff880225539a80 by task tc/796 [ 202.194508] [ 202.196185] CPU: 0 PID: 796 Comm: tc Not tainted 4.15.0-rc2jiri+ #5 [ 202.203200] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 [ 202.213613] Call Trace: [ 202.216369] dump_stack+0xda/0x169 [ 202.220192] ? dma_virt_map_sg+0x147/0x147 [ 202.224790] ? show_regs_print_info+0x54/0x54 [ 202.229691] ? tcf_chain_destroy+0x1dc/0x250 [ 202.234494] print_address_description+0x83/0x3d0 [ 202.239781] ? tcf_block_put_ext+0x240/0x390 [ 202.244575] kasan_report+0x1ba/0x460 [ 202.248707] ? tcf_block_put_ext+0x240/0x390 [ 202.253518] tcf_block_put_ext+0x240/0x390 [ 202.258117] ? tcf_chain_flush+0x290/0x290 [ 202.262708] ? qdisc_hash_del+0x82/0x1a0 [ 202.267111] ? qdisc_hash_add+0x50/0x50 [ 202.271411] ? __lock_is_held+0x5f/0x1a0 [ 202.275843] clsact_destroy+0x3d/0x80 [sch_ingress] [ 202.281323] qdisc_destroy+0xcb/0x240 [ 202.285445] qdisc_graft+0x216/0x7b0 [ 202.289497] tc_get_qdisc+0x260/0x560 Fix this by holding the block also by chain 0 and put chain 0 explicitly, out of the list_for_each_entry_safe loop at the very end of tcf_block_put_ext. Fixes: efbf7897 ("net_sched: get rid of rcu_barrier() in tcf_block_put_ext()") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Cong Wang authored
commit efbf7897 upstream. Both Eric and Paolo noticed the rcu_barrier() we use in tcf_block_put_ext() could be a performance bottleneck when we have a lot of tc classes. Paolo provided the following to demonstrate the issue: tc qdisc add dev lo root htb for I in `seq 1 1000`; do tc class add dev lo parent 1: classid 1:$I htb rate 100kbit tc qdisc add dev lo parent 1:$I handle $((I + 1)): htb for J in `seq 1 10`; do tc filter add dev lo parent $((I + 1)): u32 match ip src 1.1.1.$J done done time tc qdisc del dev root real 0m54.764s user 0m0.023s sys 0m0.000s The rcu_barrier() there is to ensure we free the block after all chains are gone, that is, to queue tcf_block_put_final() at the tail of workqueue. We can achieve this ordering requirement by refcnt'ing tcf block instead, that is, the tcf block is freed only when the last chain in this block is gone. This also simplifies the code. Paolo reported after this patch we get: real 0m0.017s user 0m0.000s sys 0m0.017s Tested-by:
Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Roman Kapl authored
commit a60b3f51 upstream. tcf_block_put_ext has assumed that all filters (and thus their goto actions) are destroyed in RCU callback and thus can not race with our list iteration. However, that is not true during netns cleanup (see tcf_exts_get_net comment). Prevent the user after free by holding all chains (except 0, that one is already held). foreach_safe is not enough in this case. To reproduce, run the following in a netns and then delete the ns: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: handle 1 prio 1 flower action goto chain 2 Fixes: 822e86d9 ("net_sched: remove tcf_block_put_deferred()") Signed-off-by:
Roman Kapl <code@rkapl.cz> Acked-by:
-
Roman Kapl authored
commit d7aa04a5 upstream. If you flush (delete) a filter chain other than chain 0 (such as when deleting the device), the kernel may run into a use-after-free. The chain refcount must not be decremented unless we are sure we are done with the chain. To reproduce the bug, run: ip link add dtest type dummy tc qdisc add dev dtest ingress tc filter add dev dtest chain 1 parent ffff: flower ip link del dtest Introduced in: commit f93e1cdc ("net/sched: fix filter flushing"), but unless you have KAsan or luck, you won't notice it until commit 0dadc117 ("cls_flower: use tcf_exts_get_net() before call_rcu()") Fixes: f93e1cdc ("net/sched: fix filter flushing") Acked-by:
-
Antoine Tenart authored
commit 760b3843 upstream. This patch adds comphy phandles to the Ethernet ports in the mcbin device tree. The comphy is used to configure the serdes PHYs used by these ports. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Antoine Tenart authored
commit 910d1bf2 upstream. This patch describes the comphy available in the cp110 master and slave. This comphy provides serdes lanes used by various controllers such as the network one. Signed-off-by:
-
Sam Bobroff authored
commit c9dccf1d upstream. Currently if the kernel receives a memory hot-unplug event early enough, it may get stuck in an infinite loop in dissolve_free_huge_pages(). This appears as a stall just after: pseries-hotplug-mem: Attempting to hot-remove XX LMB(s) at YYYYYYYY It appears to be caused by "minimum_order" being uninitialized, due to init_ras_IRQ() executing before hugetlb_init(). To correct this, extract the part of init_ras_IRQ() that enables hotplug event processing and place it in the machine_late_initcall phase, which is guaranteed to be after hugetlb_init() is called. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> [mpe: Reorder the functions to make the diff readable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
James Hogan authored
commit ebabcf17 upstream. GCC7 is a bit too eager to generate suboptimal __multi3 calls (128bit multiply with 128bit result) for MIPS64r6 builds, even in code which doesn't explicitly use 128bit types, such as the following: unsigned long func(unsigned long a, unsigned long b) { return a > (~0UL) / b; } Which GCC rearanges to: return (unsigned __int128)a * (unsigned __int128)b > 0xffffffffffffffff; Therefore implement __multi3, but only for MIPS64r6 with GCC7 as under normal circumstances we wouldn't expect any calls to __multi3 to be generated from kernel code. Reported-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
James Hogan <jhogan@kernel.org> Tested-by:
Waldemar Brodkorb <wbx@openadk.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Matthew Fortune <matthew.fortune@mips.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17890/ Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Yuval Mintz authored
[ Upstream commit 8e033a93 ] After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44b ("mlxsw: pci: Implement reset done check") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit fc233650 ] The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 95f566de ] If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by:
-
Yangbo Lu authored
[ Upstream commit 11d827a9 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit c76f97c9 ] Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 5960cefa ] Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by:
Hangbin Liu <haliu@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit cf2acf66 ] When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 951a0102 ] If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 195e2add ] The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 56c02902 ] If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
