- 19 Jul, 2019 18 commits
-
-
David Hildenbrand authored
Block ids are just shifted section numbers, so let's also use "unsigned long" for them, too. Link: http://lkml.kernel.org/r/20190614100114.311-3-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
Patch series "mm: Further memory block device cleanups", v1. Some further cleanups around memory block devices. Especially, clean up and simplify walk_memory_range(). Including some other minor cleanups. This patch (of 6): We are using a mixture of "int" and "unsigned long". Let's make this consistent by using "unsigned long" everywhere. We'll do the same with memory block ids next. While at it, turn the "unsigned long i" in removable_show() into an int - sections_per_block is an int. [akpm@linux-foundation.org: s/unsigned long i/unsigned long nr/] [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20190620183139.4352-2-david@redhat.com Link: http://lkml.kernel.org/r/20190614100114.311-2-david@redhat.comSigned-off-by:
-
Nadav Amit authored
find_next_iomem_res() shows up to be a source for overhead in dax benchmarks. Improve performance by not considering children of the tree if the top level does not match. Since the range of the parents should include the range of the children such check is redundant. Running sysbench on dax (pmem emulation, with write_cache disabled): sysbench fileio --file-total-size=3G --file-test-mode=rndwr \ --file-io-mode=mmap --threads=4 --file-fsync-mode=fdatasync run Provides the following results: events (avg/stddev) ------------------- 5.2-rc3: 1247669.0000/16075.39 w/patch: 1286320.5000/16402.72 (+3%) Link: http://lkml.kernel.org/r/20190613045903.4922-3-namit@vmware.comSigned-off-by:
Nadav Amit <namit@vmware.com> Cc: Borislav Petkov <bp@suse.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nadav Amit authored
Since resources can be removed, locking should ensure that the resource is not removed while accessing it. However, find_next_iomem_res() does not hold the lock while copying the data of the resource. Keep holding the lock while the data is copied. While at it, change the return value to a more informative value. It is disregarded by the callers. [akpm@linux-foundation.org: fix find_next_iomem_res() documentation] Link: http://lkml.kernel.org/r/20190613045903.4922-2-namit@vmware.com Fixes: ff3cc952 ("resource: Add remove_resource interface") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yang Shi authored
Commit 7635d9cb ("mm, thp, proc: report THP eligibility for each vma") introduced THPeligible bit for processes' smaps. But, when checking the eligibility for shmem vma, __transparent_hugepage_enabled() is called to override the result from shmem_huge_enabled(). It may result in the anonymous vma's THP flag override shmem's. For example, running a simple test which create THP for shmem, but with anonymous THP disabled, when reading the process's smaps, it may show: 7fc92ec00000-7fc92f000000 rw-s 00000000 00:14 27764 /dev/shm/test Size: 4096 kB ... [snip] ... ShmemPmdMapped: 4096 kB ... [snip] ... THPeligible: 0 And, /proc/meminfo does show THP allocated and PMD mapped too: ShmemHugePages: 4096 kB ShmemPmdMapped: 4096 kB This doesn't make too much sense. The shmem objects should be treated separately from anonymous THP. Calling shmem_huge_enabled() with checking MMF_DISABLE_THP sounds good enough. And, we could skip stack and dax vma check since we already checked if the vma is shmem already. Also check if vma is suitable for THP by calling transhuge_vma_suitable(). And minor fix to smaps output format and documentation. Link: http://lkml.kernel.org/r/1560401041-32207-3-git-send-email-yang.shi@linux.alibaba.com Fixes: 7635d9cb ("mm, thp, proc: report THP eligibility for each vma") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Yang Shi authored
transhuge_vma_suitable() was only available for shmem THP, but anonymous THP has the same check except pgoff check. And, it will be used for THP eligible check in the later patch, so make it available for all kind of THPs. This also helps reduce code duplication slightly. Since anonymous THP doesn't have to check pgoff, so make pgoff check shmem vma only. And regroup some functions in include/linux/mm.h to solve compile issue since transhuge_vma_suitable() needs call vma_is_anonymous() which was defined after huge_mm.h is included. [akpm@linux-foundation.org: fix typo] [yang.shi@linux.alibaba.com: v4] Link: http://lkml.kernel.org/r/1563400758-124759-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1560401041-32207-2-git-send-email-yang.shi@linux.alibaba.comSigned-off-by:
-
Wei Yang authored
In case of NODE_NOT_IN_PAGE_FLAGS is set, we store section's node id in section_to_node_table[]. While for hot-add memory, this is missed. Without this information, page_to_nid() may not give the right node id. BTW, current online_pages works because it leverages nid in memory_block. But the granularity of node id should be mem_section wide. Link: http://lkml.kernel.org/r/20190618005537.18878-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
David Hildenbrand authored
The parameter is unused, so let's drop it. Memory removal paths should never care about zones. This is the job of memory offlining and will require more refactorings. Link: http://lkml.kernel.org/r/20190527111152.16324-12-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We really don't want anything during memory hotunplug to fail. We always pass a valid memory block device, that check can go. Avoid allocating memory and eventually failing. As we are always called under lock, we can use a static piece of memory. This avoids having to put the structure onto the stack, having to guess about the stack size of callers. Patch inspired by a patch from Oscar Salvador. In the future, there might be no need to iterate over nodes at all. mem->nid should tell us exactly what to remove. Memory block devices with mixed nodes (added during boot) should properly fenced off and never removed. Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
No longer needed, the callers of arch_add_memory() can handle this manually. Link: http://lkml.kernel.org/r/20190527111152.16324-9-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Only memory to be added to the buddy and to be onlined/offlined by user space using /sys/devices/system/memory/... needs (and should have!) memory block devices. Factor out creation of memory block devices. Create all devices after arch_add_memory() succeeded. We can later drop the want_memblock parameter, because it is now effectively stale. Only after memory block devices have been added, memory can be onlined by user space. This implies, that memory is not visible to user space at all before arch_add_memory() succeeded. While at it - use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory() - introduce find_memory_block_by_id() to search via block id - Use find_memory_block_by_id() in init_memory_block() to catch duplicates Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.comSigned-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by:
-
David Hildenbrand authored
We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.comSigned-off-by: -
David Hildenbrand authored
We'll rework hotplug_memory_register() shortly, so it no longer consumes pass a section. [cai@lca.pw: fix a compilation warning] Link: http://lkml.kernel.org/r/1559320186-28337-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190527111152.16324-6-david@redhat.comSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
-
David Hildenbrand authored
A proper arch_remove_memory() implementation is on its way, which also cleanly removes page tables in arch_add_memory() in case something goes wrong. As we want to use arch_remove_memory() in case something goes wrong during memory hotplug after arch_add_memory() finished, let's add a temporary hack that is sufficient enough until we get a proper implementation that cleans up page table entries. We will remove CONFIG_MEMORY_HOTREMOVE around this code in follow up patches. Link: http://lkml.kernel.org/r/20190527111152.16324-5-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Will come in handy when wanting to handle errors after arch_add_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
ZONE_DEVICE is not yet supported, fail if an altmap is passed, so we don't forget arch_add_memory()/arch_remove_memory() when unlocking support. Link: http://lkml.kernel.org/r/20190527111152.16324-3-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. We only want memory block devices for memory to be onlined/offlined (add/remove from the buddy). This is required so user space can online/offline memory and kdump gets notified about newly onlined memory. Let's factor out creation/removal of memory block devices. This helps to further cleanup arch_add_memory/arch_remove_memory() and to make implementation of new features easier - especially sub-section memory hot add from Dan. Anshuman Khandual is currently working on arch_remove_memory(). I added a temporary solution via "arm64/mm: Add temporary arch_remove_memory() implementation", that is sufficient as a firsts tep in the context of this series. (we don't cleanup page tables in case anything goes wrong already) Did a quick sanity test with DIMM plug/unplug, making sure all devices and sysfs links properly get added/removed. Compile tested on s390x and x86-64. This patch (of 11): By converting start and size to page granularity, we actually ignore unaligned parts within a page instead of properly bailing out with an error. Link: http://lkml.kernel.org/r/20190527111152.16324-2-david@redhat.comSigned-off-by:
-
- 18 Jul, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes. - The optimization of PM resume with HD-audio HDMI codecs, which eventually work around weird issues - A correction of Intel Icelake HDMI audio code - Quirks for Dell machines with Realtek HD-audio codecs - The fix for too long sequencer write stall that was spotted by syzkaller - A few trivial cleanups reported by coccinelle" * tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't resume forcibly i915 HDMI/DP codec ALSA: hda/hdmi - Fix i915 reverse port/pin mapping ALSA: hda/hdmi - Remove duplicated define ALSA: seq: Break too long mutex context in the write loop ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine ALSA: rme9652: Unneeded variable: "result". ALSA: emu10k1: Remove unneeded variable "change" ALSA: au88x0: Remove unneeded variable: "changed" ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform ALSA: ps3: Remove Unneeded variable: "ret" ALSA: lx6464es: Remove unneeded variable err -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These modify the Intel RAPL driver to allow it to use an MMIO interface to the hardware, make the int340X thermal driver provide such an interface for it, add Intel Ice Lake CPU IDs to the RAPL driver (these changes depend on the previously merged x86 arch changes), update cpufreq to use the PM QoS framework for managing the min and max frequency limits, and add update the imx-cpufreq-dt cpufreq driver to support i.MX8MN. Specifics: - Add MMIO interface support to the Intel RAPL power capping driver and update the int340X thermal driver to provide a RAPL MMIO interface (Zhang Rui, Stephen Rothwell). - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh Bhardwaj). - Make cpufreq use the PM QoS framework (instead of notifiers) for managing the min and max frequency constraints (Viresh Kumar). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang)" * tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) cpufreq: Make cpufreq_generic_init() return void intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state powercap/rapl: Add Ice Lake NNPI support to RAPL driver powercap/intel_rapl: add support for ICX-D powercap/intel_rapl: add support for ICX powercap/intel_rapl: add support for IceLake desktop intel_rapl: Fix module autoloading issue int340X/processor_thermal_device: add support for MMIO RAPL intel_rapl: support two power limits for every RAPL domain intel_rapl: support 64 bit register intel_rapl: abstract RAPL common code intel_rapl: cleanup hardcoded MSR access intel_rapl: cleanup some functions intel_rapl: abstract register access operations intel_rapl: abstract register address intel_rapl: introduce struct rapl_if_private intel_rapl: introduce intel_rapl.h intel_rapl: remove hardcoded register index intel_rapl: use reg instead of msr cpufreq: imx-cpufreq-dt: Add i.MX8MN support ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "These get rid of two clang warnings, add a new quirk mechanism to the ACPI backlight driver (and apply it to one machine) and update the table load object initialization in ACPICA (this is a replacement for a previously reverted ACPICA commit). Specifics: - Make ACPI table loading work more consistently regardless of the exact mechanism used for loading a table (Erik Schmauss). - Get rid of two clang warnings (Arnd Bergmann). - Add new quirk mechanism to the ACPI backlight driver and use it to add a quirk for PB Easynote MZ35 (Hans de Goede)" * tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35 ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table ACPICA: Update table load object initialization -
Linus Torvalds authored
Merge floppy ioctl verification fixes from Denis Efremov. This also marks the floppy driver as orphaned - it turns out that Jiri no longer has working hardware. Actual working physical floppy hardware is getting hard to find, and while Willy was able to test this, I think the driver can be considered pretty much dead from an actual hardware standpoint. The hardware that is still sold seems to be mainly USB-based, which doesn't use this legacy driver at all. The old floppy disk controller is still emulated in various VM environments, so the driver isn't going away, but let's see if anybody is interested to step up to maintain it. The lack of hardware also likely means that the ioctl range verification fixes are probably mostly relevant to anybody using floppies in a virtual environment. Which is probably also going away in favor of USB storage emulation, but who knows. Will Decon reviewed the patches but I'm not rebasing them just for that, so I'll add a Reviewed-by:Will Deacon <will@kernel.org> here instead. * floppy: MAINTAINERS: mark floppy.c orphaned floppy: fix out-of-bounds read in copy_buffer floppy: fix invalid pointer dereference in drive_name floppy: fix out-of-bounds read in next_valid_format floppy: fix div-by-zero in setup_format_params
-
Jiri Kosina authored
I volunteered myself to maintain it quite some time ago back when I fixed the concurrency issues which exhibited itself only with VM-emulated devices, and at the same time I still had the physical 3.5" reader to test all the changes. The reader doesn't work any more though, so I guess it's time to step down from this super-prestigious role :p and mark floppy.c as Orphaned. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
* acpi-misc: ACPI: fix false-positive -Wuninitialized warning ACPI: blacklist: fix clang warning for unused DMI table * acpi-video: ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: Make cpufreq_generic_init() return void cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Add QoS requests for userspace constraints cpufreq: intel_pstate: Reuse refresh_frequency_limits() cpufreq: Register notifiers with the PM QoS framework PM / QoS: Add support for MIN/MAX frequency constraints PM / QOS: Pass request type to dev_pm_qos_read_value() PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
-
- 17 Jul, 2019 15 commits
-
-
Denis Efremov authored
This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Denis Efremov authored
This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by:
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull another x86 platform driver update from Andy Shevchenko: "Provide better naming for ABI, i.e. tell that we have fan boost mode. It won't break any ABI, but has to be done now to avoid confusion in the future" * tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: asus: Rename "fan mode" to "fan boost mode"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - Convert thermal documents to ReST (Mauro Carvalho Chehab) - Fix a cyclic depedency in between thermal core and governors (Daniel Lezcano) - Fix processor_thermal_device driver to re-evaluate power limits after resume (Srinivas Pandruvada, Zhang Rui) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal_device: Fix build warning docs: thermal: convert to ReST thermal/drivers/core: Use governor table to initialize thermal/drivers/core: Add init section table for self-encapsulation drivers: thermal: processor_thermal: Read PPCC on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: - Revert a SPIO GPIO fix that didn't fix anything but instead created new problems. - Remove the EM GPIO irqdomain in a safe manner. - Fix a memory leak in the gpio quirks. - Make the DaVinci error path silent on probe deferral. * tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio/spi: Fix spi-gpio regression on active high CS" gpio: em: remove the gpiochip before removing the irq domain gpiolib: of: fix a memory leak in of_gpio_flags_quirks() gpio: davinci: silence error prints in case of EPROBE_DEFER
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This contains support for hardware spinlock TI K3 AM65x and J721E family of SoCs, support for using hwspinlocks from atomic context and better error reporting when dealing with hardware disabled in DeviceTree" * tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc: hwspinlock: add the 'in_atomic' API hwspinlock: document the hwspinlock 'raw' API hwspinlock: stm32: implement the relax() ops hwspinlock: ignore disabled device hwspinlock/omap: Add a trace during probe hwspinlock/omap: Add support for TI K3 SoCs dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This adds support for the STM32 remoteproc, additional i.MX platforms with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Also initial support for vendor specific resource table entries and support for unprocessed Qualcomm firmware files" * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc: remoteproc: stm32: fix building without ARM SMCC remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER remoteproc: copy parent dma_pfn_offset for vdev remoteproc: qcom: q6v5-mss: Support loading non-split images soc: qcom: mdt_loader: Support loading non-split images remoteproc: stm32: add an ST stm32_rproc driver dt-bindings: remoteproc: add bindings for stm32 remote processor driver dt-bindings: stm32: add bindings for ML-AHB interconnect remoteproc: Use struct_size() helper remoteproc: add vendor resources handling remoteproc: imx: Fix typo in "failed" remoteproc: imx: Broaden the Kconfig selection logic remoteproc,rpmsg: add missing MAINTAINERS file entries remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This contains a DT binding update and a change to make the remote function of rpmsg_devices optional" * tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc: rpmsg: core: Make remove handler for rpmsg driver optional. dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Static symbol cleanup in mdev samples (Kefeng Wang) - Use vma help in nvlink code (Peng Hao) - Remove unused code in mbochs sample (YueHaibing) - Send uevents around mdev registration (Alex Williamson) * tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio: mdev: Send uevents around parent device registration sample/mdev/mbochs: remove set but not used variable 'mdev_state' vfio: vfio_pci_nvlink2: use a vma helper function vfio-mdev/samples: make some symbols static
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
-
