- 16 Dec, 2017 40 commits
-
-
Xin Long authored
[ Upstream commit e39d5246 ] Now when creating fnhe for redirect, it sets fnhe_expires for this new route cache. But when updating the exist one, it doesn't do it. It will cause this fnhe never to be expired. Paolo already noticed it before, in Jianlin's test case, it became even worse: When ip route flush cache, the old fnhe is not to be removed, but only clean it's members. When redirect comes again, this fnhe will be found and updated, but never be expired due to fnhe_expires not being set. So fix it by simply updating fnhe_expires even it's for redirect. Fixes: aee06da6 ("ipv4: use seqlock for nh_exceptions") Reported-by:
Jianlin Shi <jishi@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit cebe84c6 ] Now when ip route flush cache and it turn out all fnhe_genid != genid. If a redirect/pmtu icmp packet comes and the old fnhe is found and all it's members but fnhe_genid will be updated. Then next time when it looks up route and tries to rebind this fnhe to the new dst, the fnhe will be flushed due to fnhe_genid != genid. It causes this redirect/pmtu icmp packet acutally not to be applied. This patch is to also reset fnhe_genid when updating a route cache. Fixes: 5aad1de5 ("ipv4: use separate genid for next hop exceptions") Acked-by:
-
Ben Hutchings authored
[ Upstream commit 67bd5238 ] hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73d ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 2dbc644a ] For rpm-pkg and deb-pkg, a source tar file is created. All paths in the archive must be prefixed with the base name of the tar so that everything is contained in the directory when you extract it. Currently, scripts/package/Makefile uses a symlink for that, and removes it after the tar is created. If you terminate the build during the tar creation, the symlink is left over. Then, at the next package build, you will see a warning like follows: ln: '.' and 'kernel-4.14.0+/.' are the same file It is possible to fix it by adding -n (--no-dereference) option to the "ln" command, but a cleaner way is to use --transform option of "tar" command. This option is GNU extension, but it should not hurt to use it in the Linux build system. The 'S' flag is needed to exclude symlinks from the path fixup. Without it, symlinks in the kernel are broken. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Jérémy Lefaure authored
[ Upstream commit a8c82614 ] In the i5000 and i5400 drivers, the NRECMEMB register is defined as a 16-bit value, which results in wrong shifts in the code, as reported by sparse. In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21), this register is a 32-bit register. A u32 value for the register fixes the wrong shifts warnings and matches the datasheet. Also fix the mask to access to the CAS bits [27:16] in the i5000 driver. [1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf [2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdfSigned-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.frSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jérémy Lefaure authored
[ Upstream commit e61555c2 ] The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as if it returned a boolean true if the width if 8. Fix the tests where MTR_DRAM_WIDTH is misused. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 7aafac11 ] The IODA2 specification says that a 64 DMA address cannot use top 4 bits (3 are reserved and one is a "TVE select"); bottom page_shift bits cannot be used for multilevel table addressing either. The existing IODA2 table allocation code aligns the minimum TCE table size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages, we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs 13 bits, the maximum number of levels is 48/13 = 3 so we physically cannot address more and EEH happens on DMA accesses. This adds a check that too many levels were requested. It is still possible to have 5 levels in the case of 4K system page size. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jim Qu authored
[ Upstream commit c085bd51 ] Signed-off-by:
Jim Qu <Jim.Qu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 672a2c87 ] It is invalid to call del_gendisk() when disk->queue is NULL. Fix error handling in axon_ram_probe() to avoid doing that. Also del_gendisk() does not drop a reference to gendisk allocated by alloc_disk(). That has to be done by put_disk(). Add that call where needed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 7b4fdf77 ] Andrey reports syzkaller splat caused by NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb))); in ipv4 nat. But this assertion (and the comment) are wrong, this function does see fragments when IP_NODEFRAG setsockopt is used. As conntrack doesn't track packets without complete l4 header, only the first fragment is tracked. Because applying nat to first packet but not the rest makes no sense this also turns off tracking of all fragments. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 0bc31538 ] zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using the NVMe over Fabrics loopback target which potentially sends a huge bulk of pages attached to the bio's bvec this results in a kernel panic because of array out of bounds accesses in zram_decompress_page(). Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Chris Brandt authored
[ Upstream commit 2501c1bb ] While modifying the driver to use the STOP interrupt, the completion of the intermediate transfers need to wake the driver back up in order to initiate the next transfer (restart condition). Otherwise you get never ending interrupts and only the first transfer sent. Fixes: 71ccea09 ("i2c: riic: correctly finish transfers") Reported-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 07de4bc8 ] In a regular interrupt handler driver was finishing the crypt/decrypt request by calling complete on crypto request. This is disallowed since converting to skcipher in commit b286d8b1 ("crypto: skcipher - Add skcipher walk interface") and causes a warning: WARNING: CPU: 0 PID: 0 at crypto/skcipher.c:430 skcipher_walk_first+0x13c/0x14c The interrupt is marked shared but in fact there are no other users sharing it. Thus the simplest solution seems to be to just use a threaded interrupt handler, after converting it to oneshot. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 15e66807 ] Andrey reported the following kernel crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88001f311700 task.stack: ffff88001f6e8000 RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618 RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000 RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020 RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000 R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040 FS: 00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x39d/0x880 net/socket.c:1226 sock_create_kern+0x3f/0x50 net/socket.c:1243 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954 ops_init+0x10a/0x550 net/core/net_namespace.c:115 setup_net+0x261/0x660 net/core/net_namespace.c:291 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396 9pnet_virtio: no channels available for device ./file1 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0x1000 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because net->ipv6.mr6_tables is not initialized at that point, ip6mr_rules_init() is not called yet, therefore on the error path when we iterator the list, we trigger this oops. Fix this by reordering ip6mr_rules_init() before icmpv6_sk_init(). Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 78d55054 ] On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 22118d86 ] It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 466e8bf1 ] It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by:
-
Blomme, Maarten authored
[ Upstream commit 4342696d ] Signed-off-by:
Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit ba4dd156 ] Currently we BUG() if we see an ESR_EL2.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0487A.k_iss10775, page D7-1937, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit f050fe7a ] Currently we BUG() if we see a HSR.EC value we don't recognise. As configurable disables/enables are added to the architecture (controlled by RES1/RES0 bits respectively), with associated synchronous exceptions, it may be possible for a guest to trigger exceptions with classes that we don't recognise. While we can't service these exceptions in a manner useful to the guest, we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently unallocated HSR EC encodings are reserved, and per ARM DDI 0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c are reserved for future use with synchronous exceptions, and EC values within the range 0x2d - 0x3f may be used for either synchronous or asynchronous exceptions. The patch makes KVM handle any unknown EC by injecting an UNDEFINED exception into the guest, with a corresponding (ratelimited) warning in the host dmesg. We could later improve on this with with a new (opt-in) exit to the host userspace. Cc: Dave Martin <dave.martin@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
-
Wanpeng Li authored
[ Upstream commit 2f707d97 ] Reported by syzkaller: WARNING: CPU: 1 PID: 27742 at arch/x86/kvm/vmx.c:11029 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 CPU: 1 PID: 27742 Comm: a.out Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029 vmx_leave_nested arch/x86/kvm/vmx.c:11136 [inline] vmx_set_msr+0x1565/0x1910 arch/x86/kvm/vmx.c:3324 kvm_set_msr+0xd4/0x170 arch/x86/kvm/x86.c:1099 do_set_msr+0x11e/0x190 arch/x86/kvm/x86.c:1128 __msr_io arch/x86/kvm/x86.c:2577 [inline] msr_io+0x24b/0x450 arch/x86/kvm/x86.c:2614 kvm_arch_vcpu_ioctl+0x35b/0x46a0 arch/x86/kvm/x86.c:3497 kvm_vcpu_ioctl+0x232/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2721 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x1bf/0x1790 fs/ioctl.c:683 SYSC_ioctl fs/ioctl.c:698 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:689 entry_SYSCALL_64_fastpath+0x1f/0xc2 The syzkaller folks reported a nested_run_pending warning during userspace clear VMX capability which is exposed to L1 before. The warning gets thrown while doing (*(uint32_t*)0x20aecfe8 = (uint32_t)0x1); (*(uint32_t*)0x20aecfec = (uint32_t)0x0); (*(uint32_t*)0x20aecff0 = (uint32_t)0x3a); (*(uint32_t*)0x20aecff4 = (uint32_t)0x0); (*(uint64_t*)0x20aecff8 = (uint64_t)0x0); r[29] = syscall(__NR_ioctl, r[4], 0x4008ae89ul, 0x20aecfe8ul, 0, 0, 0, 0, 0, 0); i.e. KVM_SET_MSR ioctl with struct kvm_msrs { .nmsrs = 1, .pad = 0, .entries = { {.index = MSR_IA32_FEATURE_CONTROL, .reserved = 0, .data = 0} } } The VMLANCH/VMRESUME emulation should be stopped since the CPU is going to reset here. This patch resets the nested_run_pending since the CPU is going to be reset hence there should be nothing pending. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Franck Demathieu authored
[ Upstream commit 4b9de5da ] The 'size' variable is unsigned according to the dt-bindings. As this variable is used as integer in other places, create a new variable that allows to fix the following sparse issue (-Wtypesign): drivers/irqchip/irq-crossbar.c:279:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:279:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:279:52: got int *<noident> Signed-off-by:
Franck Demathieu <fdemathieu@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 5d181531 ] if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 637fdbae ] If queue_delayed_work() gets called with NULL @wq, the kernel will oops asynchronuosly on timer expiration which isn't too helpful in tracking down the offender. This actually happened with smc. __queue_delayed_work() already does several input sanity checks synchronously. Add NULL @wq check. Reported-by:
Dave Jones <davej@codemonkey.org.uk> Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.ukSigned-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 0580b762 ] ata_sff_qc_issue() expects upper layers to never issue commands on a command protocol that it doesn't implement. While the assumption holds fine with the usual IO path, nothing filters based on the command protocol in the passthrough path (which was added later), allowing the warning to be tripped with a passthrough command with the right (well, wrong) protocol. Failing with AC_ERR_SYSTEM is the right thing to do anyway. Remove the unnecessary WARN. Reported-by:
-
Jim Mattson authored
[ Upstream commit 587d7e72 ] VMCLEAR should silently ignore a failure to clear the launch state of the VMCS referenced by the operand. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit b6e7aeea ] 'kbuf' is allocated just a few lines above using 'memdup_user()'. If the 'if (dev->buf)' test fails, this memory is never released. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
John Keeping authored
[ Upstream commit 38355b2a ] When binding a gadget to a device, "name" is stored in gi->udc_name, but this does not happen when unregistering and the string is leaked. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Daniel Drake authored
[ Upstream commit f2f10b7e ] Add support for media keys on the keyboard that comes with the Asus V221ID and ZN241IC All In One computers. The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP. This device is not visibly branded as Chicony, and the USB Vendor ID suggests that it is a JESS device. However this seems like the right place to put it: the usage codes are identical to the currently supported devices, and this driver already supports the ASUS AIO keyboard AK1D. Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Phil Reid authored
[ Upstream commit f759921c ] When a threaded irq handler is chained attached to one of the gpio pins when configure for level irq the altera_gpio_irq_leveL_high_handler does not mask the interrupt while being handled by the chained irq. This resulting in the threaded irq not getting enough cycles to complete quickly enough before the irq was disabled as faulty. handle_level_irq should be used in this situation instead of handle_simple_irq. In gpiochip_irqchip_add set default handler to handle_bad_irq as per Documentation/gpio/driver.txt. Then set the correct handler in the set_type callback. Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit b92675d9 ] The device node returned by of_find_node_by_name() needs to be released after it is no longer needed to avoid a device node leak. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 10e5778f ] After commit 0549bde0 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
David Daney authored
[ Upstream commit ab426321 ] For powerpc the __jump_table section in modules is not aligned, this causes a WARN_ON() splat when loading a module containing a __jump_table. Strict alignment became necessary with commit 3821fd35 ("jump_label: Reduce the size of struct static_key"), currently in linux-next, which uses the two least significant bits of pointers to __jump_table elements. Fix by forcing __jump_table to 8, which is the same alignment used for this section in the kernel proper. Link: http://lkml.kernel.org/r/20170301220453.4756-1-david.daney@cavium.comReviewed-by:
Jason Baron <jbaron@akamai.com> Acked-by:
Jessica Yu <jeyu@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Sachin Sant authored
[ Upstream commit a6d8a215 ] Tests under alignment subdirectory are skipped when executed on previous generation hardware, but harness still marks them as failed. test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [FAIL] The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till the program exit which causes the test to be marked as failed. This patch resets the value before returning to the main() routine. With this patch the test o/p is as follows: test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [PASS] Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit bb1a2c26 ] Sergey reported a might sleep warning triggered from the hpet resume path. It's caused by the call to disable_irq() from interrupt disabled context. The problem with the low level resume code is that it is not accounted as a special system_state like we do during the boot process. Calling the same code during system boot would not trigger the warning. That's inconsistent at best. In this particular case it's trivial to replace the disable_irq() with disable_hardirq() because this particular code path is solely used from system resume and the involved hpet interrupts can never be force threaded. Reported-and-tested-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703012108460.3684@nanosSigned-off-by:
-
Ladislav Michl authored
[ Upstream commit 7807e086 ] gpmc_probe_onenand_child returns success even on gpmc_onenand_init failure. Fix that. Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Acked-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit e3dc847a ] In vti6_xmit(), the check for IPV6_MIN_MTU before we send a ICMPV6_PKT_TOOBIG message is missing. So we might report a PMTU below 1280. Fix this by adding the required check. Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit cabab3f9. Not needed for < 4.9. Signed-off-by:
-
Sasha Levin authored
This reverts commit dadab2d4. Not required on < 4.10. Signed-off-by:
-
Sasha Levin authored
This reverts commit 82f260d4. Not required on < 4.10. Signed-off-by:
-
