- 21 Jul, 2017 40 commits
-
-
Kees Cook authored
commit 47ebb09d upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.orgSigned-off-by: Kees Cook <keescook@chromium.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 02445990 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.orgSigned-off-by: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 6a9af90a upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. 4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.orgSigned-off-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit eab09532 upstream. The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.) With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused. For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions. Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region). To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs. For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution. Fixes: d1fd836d ("mm: split ET_DYN ASLR from mmap ASLR") Link: http://lkml.kernel.org/r/20170621173201.GA114489@beastSigned-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cyril Bur authored
commit 8d81ae05 upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by: Cyril Bur <cyrilbur@gmail.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sahitya Tummala authored
commit b17c070f upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by: Sahitya Tummala <stummala@codeaurora.org> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sahitya Tummala authored
commit 2c80cd57 upstream. list_lru_count_node() iterates over all memcgs to get the total number of entries on the node but it can race with memcg_drain_all_list_lrus(), which migrates the entries from a dead cgroup to another. This can return incorrect number of entries from list_lru_count_node(). Fix this by keeping track of entries per node and simply return it in list_lru_count_node(). Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.orgSigned-off-by: Sahitya Tummala <stummala@codeaurora.org> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Alexander Polakov <apolyakov@beget.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcin Nowakowski authored
commit c0d80dda upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kirill A. Shutemov authored
commit bbf29ffc upstream. Reinette reported the following crash: BUG: Bad page state in process log2exe pfn:57600 page:ffffea00015d8000 count:0 mapcount:0 mapping: (null) index:0x20200 flags: 0x4000000000040019(locked|uptodate|dirty|swapbacked) raw: 4000000000040019 0000000000000000 0000000000020200 00000000ffffffff raw: ffffea00015d8020 ffffea00015d8020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: rfcomm 8021q bnep intel_rapl x86_pkg_temp_thermal coretemp efivars btusb btrtl btbcm pwm_lpss_pci snd_hda_codec_hdmi btintel pwm_lpss snd_hda_codec_realtek snd_soc_skl snd_hda_codec_generic snd_soc_skl_ipc spi_pxa2xx_platform snd_soc_sst_ipc snd_soc_sst_dsp i2c_designware_platform i2c_designware_core snd_hda_ext_core snd_soc_sst_match snd_hda_intel snd_hda_codec mei_me snd_hda_core mei snd_soc_rt286 snd_soc_rl6347a snd_soc_core efivarfs CPU: 1 PID: 354 Comm: log2exe Not tainted 4.12.0-rc7-test-test #19 Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0027.2016.1108.1529 11/08/2016 Call Trace: bad_page+0x16a/0x1f0 free_pages_check_bad+0x117/0x190 free_hot_cold_page+0x7b1/0xad0 __put_page+0x70/0xa0 madvise_free_huge_pmd+0x627/0x7b0 madvise_free_pte_range+0x6f8/0x1150 __walk_page_range+0x6b5/0xe30 walk_page_range+0x13b/0x310 madvise_free_page_range.isra.16+0xad/0xd0 madvise_free_single_vma+0x2e4/0x470 SyS_madvise+0x8ce/0x1450 If somebody frees the page under us and we hold the last reference to it, put_page() would attempt to free the page before unlocking it. The fix is trivial reorder of operations. Dave said: "I came up with the exact same patch. For posterity, here's the test case, generated by syzkaller and trimmed down by Reinette: https://www.sr71.net/~dave/intel/log2.c And the config that helps detect this: https://www.sr71.net/~dave/intel/config-log2" Fixes: b8d3c4c3 ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called") Link: http://lkml.kernel.org/r/20170628101249.17879-1-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
commit 98dcea0c upstream. liblockdep has been broken since commit 75dd602a ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 649aa242 upstream. This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm(). This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off(). Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Bogendoerfer authored
commit 33f9e024 upstream. Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG: CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156 task: 000000009e050000 task.stack: 000000009e04c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001111 Not tainted r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8 CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2 ORIG_R28: 0000000000000200 IAOQ[0]: sba_dma_supported+0x80/0xd0 IAOQ[1]: sba_dma_supported+0x84/0xd0 RP(r2): parport_pc_probe_port+0x178/0x1200 Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit b0f94efd upstream. Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 24746231 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suzuki K Poulose authored
commit 866d7c1b upstream. The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN: [ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051] This patch adds the check to make sure the cpu is valid. Fixes: commit 021f6537 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Dasari authored
commit 0a27844c upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from userspace with NL80211_NAN_FUNC_SERVICE_ID. Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Dasari authored
commit 9361df14 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID. Fixes: 67fbb16b ("nl80211: PMKSA caching support") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Dasari authored
commit d7f13f74 upstream. validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy. Validate size of each attribute before parsing to avoid potential buffer overread. Fixes: 2a519311 ("cfg80211/nl80211: scanning (and mac80211 update to use it)") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Dasari authored
commit 8feb69c7 upstream. Buffer overread may happen as nl80211_set_station() reads 4 bytes from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without validating the size of data received when userspace sends less than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE. Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid the buffer overread. Fixes: 3b1c5a53 ("{cfg,nl}80211: mesh power mode primitives and userspace access") Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bert Kenward authored
[ Upstream commit c70d6815 ] If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter S. Housel authored
commit 5ea59db8 upstream. An earlier change to this function (3bdae810) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810 ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Jaillet authored
commit 57c00f2f upstream. If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error handling path to free it in such a case. Fixes: 5c22fb85 ("brcmfmac: add wowl gtk rekeying offload support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arend van Spriel authored
commit 8f44c9a4 upstream. The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by: "freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sowmini Varadhan authored
commit 0933a578 upstream. There are two problems with calling sock_create_kern() from rds_tcp_accept_one() 1. it sets up a new_sock->sk that is wasteful, because this ->sk is going to get replaced by inet_accept() in the subsequent ->accept() 2. The new_sock->sk is a leaked reference in sock_graft() which expects to find a null parent->sk Avoid these problems by calling sock_create_lite(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
commit f630c38e upstream. When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125db ("net: Introduce VRF device driver") Reported-by: Chris Cormier <chriscormier@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Ahern authored
commit f06b7549 upstream. Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsahern@gmail.com> Reported-by: João Taveira Araújo <joao.taveira@gmail.com> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alban Browaeys authored
commit 9af9959e upstream. commit 9256645a ("net/core: relax BUILD_BUG_ON in netdev_stats_to_stats64") made an attempt to read beyond the size of the source a possibility. Fix to only copy src size to dest. As dest might be bigger than src. ================================================================== BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr ffff8801be248b20 Read of size 192 by task VBoxNetAdpCtl/6734 CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G O 4.11.4prahal+intel+ #118 Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017 Call Trace: dump_stack+0x63/0x86 kasan_object_err+0x1c/0x70 kasan_report+0x270/0x520 ? netdev_stats_to_stats64+0xe/0x30 ? sched_clock_cpu+0x1b/0x190 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 netdev_stats_to_stats64+0xe/0x30 dev_get_stats+0x1b9/0x230 rtnl_fill_stats+0x44/0xc00 ? nla_put+0xc6/0x130 rtnl_fill_ifinfo+0xe9e/0x3700 ? rtnl_fill_vfinfo+0xde0/0xde0 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_local+0x120/0x130 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_cpu+0x1b/0x190 ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? depot_save_stack+0x1d8/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? save_stack+0xb1/0xd0 ? save_stack_trace+0x16/0x20 ? save_stack+0x46/0xd0 ? kasan_slab_alloc+0x12/0x20 ? __kmalloc_node_track_caller+0x10d/0x350 ? __kmalloc_reserve.isra.36+0x2c/0xc0 ? __alloc_skb+0xd0/0x560 ? rtmsg_ifinfo_build_skb+0x61/0x120 ? rtmsg_ifinfo.part.25+0x16/0xb0 ? rtmsg_ifinfo+0x47/0x70 ? register_netdev+0x15/0x30 ? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] ? vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? do_vfs_ioctl+0x17f/0xff0 ? SyS_ioctl+0x74/0x80 ? do_syscall_64+0x182/0x390 ? __alloc_skb+0xd0/0x560 ? __alloc_skb+0xd0/0x560 ? save_stack_trace+0x16/0x20 ? init_object+0x64/0xa0 ? ___slab_alloc+0x1ae/0x5c0 ? ___slab_alloc+0x1ae/0x5c0 ? __alloc_skb+0xd0/0x560 ? sched_clock+0x9/0x10 ? kasan_unpoison_shadow+0x35/0x50 ? kasan_kmalloc+0xad/0xe0 ? __kmalloc_node_track_caller+0x246/0x350 ? __alloc_skb+0xd0/0x560 ? kasan_unpoison_shadow+0x35/0x50 ? memset+0x31/0x40 ? __alloc_skb+0x31f/0x560 ? napi_consume_skb+0x320/0x320 ? br_get_link_af_size_filtered+0xb7/0x120 [bridge] ? if_nlmsg_size+0x440/0x630 rtmsg_ifinfo_build_skb+0x83/0x120 rtmsg_ifinfo.part.25+0x16/0xb0 rtmsg_ifinfo+0x47/0x70 register_netdevice+0xa2b/0xe50 ? __kmalloc+0x171/0x2d0 ? netdev_change_features+0x80/0x80 register_netdev+0x15/0x30 vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp] ? kasan_check_write+0x14/0x20 VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp] ? lock_acquire+0x11c/0x270 ? __audit_syscall_entry+0x2fb/0x660 do_vfs_ioctl+0x17f/0xff0 ? __audit_syscall_entry+0x2fb/0x660 ? ioctl_preallocate+0x1d0/0x1d0 ? __audit_syscall_entry+0x2fb/0x660 ? kmem_cache_free+0xb2/0x250 ? syscall_trace_enter+0x537/0xd00 ? exit_to_usermode_loop+0x100/0x100 SyS_ioctl+0x74/0x80 ? do_sys_open+0x350/0x350 ? do_vfs_ioctl+0xff0/0xff0 do_syscall_64+0x182/0x390 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f7e39a1ae07 RSP: 002b:00007ffc6f04c6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc6f04c730 RCX: 00007f7e39a1ae07 RDX: 00007ffc6f04c730 RSI: 00000000c0207601 RDI: 0000000000000007 RBP: 00007ffc6f04c700 R08: 00007ffc6f04c780 R09: 0000000000000008 R10: 0000000000000541 R11: 0000000000000206 R12: 0000000000000007 R13: 00000000c0207601 R14: 00007ffc6f04c730 R15: 0000000000000012 Object at ffff8801be248008, in cache kmalloc-4096 size: 4096 Allocated: PID = 6734 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x171/0x2d0 alloc_netdev_mqs+0x8a7/0xbe0 vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] do_vfs_ioctl+0x17f/0xff0 SyS_ioctl+0x74/0x80 do_syscall_64+0x182/0x390 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 5600 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x73/0xc0 kfree+0xe4/0x220 kvfree+0x25/0x30 single_release+0x74/0xb0 __fput+0x265/0x6b0 ____fput+0x9/0x10 task_work_run+0xd5/0x150 exit_to_usermode_loop+0xe2/0x100 do_syscall_64+0x26c/0x390 return_from_SYSCALL_64+0x0/0x6a Memory state around the buggy address: ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc ^ ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Benc authored
[ Upstream commit 69e76661 ] It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sabrina Dubroca authored
commit ec8add2a upstream. Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1): ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 In the same situation, this will succeed and not remove the address (2): ip addr add 1111::12/64 dev $DEV ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why: * If the device is not ready: * - keep it tentative if it is a permanent address. * - otherwise, kill it. We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2). addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses. Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gal Pressman authored
commit 8ff93de7 upstream. Symbol error during carrier counter from PPCNT was mistakenly reported as TX carrier errors in get_stats ndo, although it's an RX counter. Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Derek Chickles authored
commit 05a6b4ca upstream. The code that detects a failed soft reset of Octeon is comparing the wrong value against the reset value of the Octeon SLI_SCRATCH_1 register, resulting in an inability to detect a soft reset failure. Fix it by using the correct value in the comparison, which is any non-zero value. Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters") Fixes: c0eab5b3 ("liquidio: CN23XX firmware download") Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mohamad Haj Yahia authored
commit 2a0165a0 upstream. Draining the health workqueue will ignore future health works including the one that report hardware failure and thus we can't enter error state Instead cancel the recovery flow and make sure only recovery flow won't be scheduled. Fixes: 5e44fca5 ('net/mlx5: Only cancel recovery work when cleaning up device') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Kubeček authored
commit e44699d2 upstream. Recently I started seeing warnings about pages with refcount -1. The problem was traced to packets being reused after their head was merged into a GRO packet by skb_gro_receive(). While bisecting the issue pointed to commit c21b48cc ("net: adjust skb->truesize in ___pskb_trim()") and I have never seen it on a kernel with it reverted, I believe the real problem appeared earlier when the option to merge head frag in GRO was implemented. Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE branch of napi_skb_finish() so that if the driver uses napi_gro_frags() and head is merged (which in my case happens after the skb_condense() call added by the commit mentioned above), the skb is reused including the head that has been merged. As a result, we release the page reference twice and eventually end up with negative page refcount. To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish() the same way it's done in napi_skb_finish(). Fixes: d7e8883c ("net: make GRO aware of skb->head_frag") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Borkmann authored
commit 6bdf6abc upstream. Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit acb4b7df upstream. My static checker complains that ofdpa_neigh_del() can sometimes free "found". It just makes sense to use it first before deleting it. Fixes: ecf244f7 ("rocker: fix maybe-uninitialized warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eduardo Valentin authored
commit 1bfb1596 upstream. We currently get the following kmemleak report: unreferenced object 0xffff8800039d9820 (size 32): comm "softirq", pid 0, jiffies 4295212383 (age 792.416s) hex dump (first 32 bytes): 00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00 ................ 00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff ................ backtrace: [<ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0 [<ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge] [<ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge] [<ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge] [<ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge] [<ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge] [<ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge] [<ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter] [<ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter] [<ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter] [<ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter] [<ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter] [<ffffffff814a2952>] nf_iterate+0x52/0x60 [<ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0 [<ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge] This happens when switchdev_port_obj_add() fails. This patch frees complete_info object in the fail path. Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com> Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 6f64ec74 upstream. Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
commit d747a7a5 upstream. We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by: Andrei Vagin <avagin@gmail.com> Reported-by: Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Cochran authored
commit db9d8b29 upstream. The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
commit 60abc0be upstream. The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-