- 07 Jan, 2021 5 commits
-
-
Mark Brown authored
Merge series "regulator: mcp16502: make lpm pin optional" from Claudiu Beznea <claudiu.beznea@microchip.com>: Hi, This patch makes the LPM pin as optional as this may be controlled in the last phase of suspend procedure to decrease the power consumption while suspended. Along w/ this update the MAINTAINERS entry for this driver. Thank you, Claudiu Beznea Claudiu Beznea (3): dt-bindings: regulator: mcp16502: document lpm as optional regulator: mcp16502: lpm pin can be optional on some platforms MAINTAINERS: add myself as maintainer for mcp16502 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt | 3 ++- MAINTAINERS | 4 ++-- drivers/regulator/mcp16502.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Matti Vaittinen authored
The ROHM PMIC regulator drivers only need the regmap pointer from the parent device. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210107122355.GA35080@localhost.localdomainSigned-off-by: Mark Brown <broonie@kernel.org>
-
Claudiu Beznea authored
Document LPM pin as optional. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-2-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Claudiu Beznea authored
Andrei is no longer with Microchip. Add myself as maintainer for MCP16502. Along with this change the status from maintained to supported. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-4-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Claudiu Beznea authored
On some platform (e.g. SAMA7G5) LPM pin should be optional as it can be controlled explicitly (via shutdown controller registers) in the platform specific power saving code to decrease the power consumption while suspended as this SoC pin may be connected to other devices that could take power saving actions based on its value. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Jan, 2021 3 commits
-
-
Mark Brown authored
Merge series "Add driver for dvfsrc, support for active state of scpsys" from Henry Chen <henryc.chen@mediatek.com>: This series is based on v5.10-rc1. The patchsets add support for MediaTek hardware module named DVFSRC (dynamic voltage and frequency scaling resource collector). The DVFSRC is a HW module which is used to collect all the requests from both software and hardware and turn into the decision of minimum operating voltage and minimum DRAM frequency to fulfill those requests. So, This series is to implement the dvfsrc driver to collect all the requests of operating voltage or DRAM bandwidth from other device drivers likes GPU/Camera through 3 frameworks basically: 1. interconnect framework: to aggregate the bandwidth requirements from different clients [1] https://patchwork.kernel.org/cover/10766329/ There has a hw module "DRAM scheduler", which used to control the throughput. The DVFSRC will collect forecast data of dram bandwidth from SW consumers(camera/gpu...), and according the forecast to change the DRAM frequency 2. Regualtor framework: to handle the operating voltage requirement from user or cosumer which not belong any power domain Changes in V6: * Remove the performace state support, because the request from consumer can be replaced by using interconnect and regulator framework. * Update the DT patches and convert them to DT schema. (Georgi) * Modify the comment format and coding style. (Mark) Changes in V5: * Support more platform mt6873/mt8192 * Drop the compatible and interconnect provider node and make the parent node an interconnect provider. (Rob/Georgi) * Make modification of interconnect driver from coding suggestion. (Georgi) * Move interconnect diagram into the commit text of patch. (Georgi) * Register the interconnect provider as a platform sub-device. (Georgi) Changes in V4: * Add acked TAG on dt-bindings patches. (Rob) * Declaration of emi_icc_aggregate since the prototype of aggregate function has changed meanwhile. (Georgi) * Used emi_icc_remove instead of icc_provider_del on probe. (Georgi) * Add dvfsrc regulator driver into series. * Bug fixed of mt8183_get_current_level. * Add mutex protection for pstate operation on dvfsrc_set_performance. Changes in V3: * Remove RFC from the subject prefix of the series * Combine dt-binding patch and move interconnect dt-binding document into dvfsrc. (Rob) * Remove unused header, add unit descirption to the bandwidth, rename compatible name on interconnect driver. (Georgi) * Fixed some coding style: check flow, naming, used readx_poll_timeout on dvfsrc driver. (Ryan) * Rename interconnect driver mt8183.c to mtk-emi.c * Rename interconnect header mtk,mt8183.h to mtk,emi.h * mtk-scpsys.c: Add opp table check first to avoid OF runtime parse failed Changes in RFC V2: * Remove the DT property dram_type. (Rob) * Used generic dts property 'opp-level' to get the performace state. (Stephen) * Remove unecessary dependency config on Kconfig. (Stephen) * Remove unused header file, fixed some coding style issue, typo, error handling on dvfsrc driver. (Nicolas/Stephen) * Remove irq handler on dvfsrc driver. (Stephen) * Remove init table on dvfsrc driver, combine hw init on trustzone. * Add interconnect support of mt8183 to aggregate the emi bandwidth. (Georgi) V5: https://patchwork.kernel.org/project/linux-mediatek/list/?series=348065 V4: https://lore.kernel.org/patchwork/cover/1209284/ V3: https://patchwork.kernel.org/cover/11118867/ RFC V2: https://lore.kernel.org/patchwork/patch/1068113/ RFC V1: https://lore.kernel.org/patchwork/cover/1028535/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Matti Vaittinen authored
The ROHM PMIC regulator drivers only need the regmap pointer from the parent device. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210105130221.GA3438042@localhost.localdomainSigned-off-by: Mark Brown <broonie@kernel.org>
-
henryc.chen authored
Driver for regulators exposed by the DVFSRC (dynamic voltage and frequency scaling resource collector) found in devices based on mt8183 and newer platforms. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Jan, 2021 9 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge series "regulator: fix pm8009 bindings on sm8250" from Dmitry Baryshkov <dmitry.baryshkov@linaro.org>: PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. base-commit: 5c8fe583
-
Daniel Scally authored
The function regulator_set_device_supply() is referenced a few times in comments in regulator/core.c; however this function was removed a long time ago by commit a5766f11 ("regulator: core - Rework machine API to remove string based functions."). Update those references to point to set_consumer_device_supply(), which replaced the old function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20210103165541.784360-1-djrscally@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
A built-in regulator driver cannot link against a modular cmd_db driver: qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr' There is already a dependency for RPMh, so add another one of this type for cmd_db. Fixes: 34c5aa26 ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error") Fixes: 46fc033e ("regulator: add QCOM RPMh regulator driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dmitry Baryshkov authored
Fix pm8009 compatibility string to reference pm8009 revision specific to sm8250 platform. Also add S2 regulator to be used for qca639x. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: b1d2674e ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dmitry Baryshkov authored
PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dmitry Baryshkov authored
According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dmitry Baryshkov authored
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Add special compatibility string for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 30 Dec, 2020 1 commit
-
-
Cristian Ciocaltea authored
Add support for the DC-DC converters and LDO regulators found in the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x family of PMICs. Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Dec, 2020 6 commits
-
-
Mark Brown authored
Linux 5.11-rc1
-
ChiYuan Huang authored
Adds support for Richtek RT4831 DSV Regulator Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-6-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
Adds DT binding document for Richtek RT4831 DSV regulator. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-3-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Randy Dunlap authored
Restrict REGULATOR_QCOM_RPMH to QCOM_COMMAND_DB it the latter is enabled. Fixes this build error: microblaze-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe': (.text+0x354): undefined reference to `cmd_db_read_addr' Fixes: 778279f4 ("soc: qcom: cmd-db: allow loading as a module") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20201225185004.20747-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Randy Dunlap authored
Change "which which" to "for which" in 3 places. Change "ranges" to possessive "range's" in 1 place. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20201221040610.12809-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
-
- 27 Dec, 2020 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Since commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d..b24c30c6, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
-
- 26 Dec, 2020 5 commits
-
-
Linus Torvalds authored
Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
-
Nathan Chancellor authored
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Lobakin authored
Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-
Rob Herring authored
Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
-
- 25 Dec, 2020 3 commits
-
-
Linus Torvalds authored
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use cases in ARM machines. - Fix memory leak when synthesizing SDT probes in 'perf probe'. - Update kernel header copies related to KVM, epol_pwait. msr-index and powerpc and s390 syscall tables. * tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits) perf probe: Fix memory leak when synthesizing SDT probes perf stat aggregation: Add separate thread member perf stat aggregation: Add separate core member perf stat aggregation: Add separate die member perf stat aggregation: Add separate socket member perf stat aggregation: Add separate node member perf stat aggregation: Start using cpu_aggr_id in map perf cpumap: Drop in cpu_aggr_map struct perf cpumap: Add new map type for aggregation perf stat: Replace aggregation ID with a struct perf cpumap: Add new struct for cpu aggregation perf cpumap: Use existing allocator to avoid using malloc perf tests: Improve topology test to check all aggregation types perf tools: Update s390's syscall.tbl copy from the kernel sources perf tools: Update powerpc's syscall.tbl copy from the kernel sources perf s390: Move syscall.tbl check into check-headers.sh perf powerpc: Move syscall.tbl check to check-headers.sh tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers: Update KVM headers from the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle updates from Julia Lawall. * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: Correct usage of make coccicheck coccinelle: update expiring email addresses coccinnelle: Remove ptr_ret script kbuild: do not use scripts/ld-version.sh for checking spatch version remove boolinit.cocci
-