Modify Lights greybus driver to support runtime PM framework.
The suspend and resume function have been tested with gpbridge-test
image by sysfs. Lights functions work well on suspend/resume.

Testing Done: Compiled and verified on EVT2 and gpbridge-test module
              with device class daughter board.
Signed-off-by: Kris Huang <huang_kris@projectara.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Modify SDIO greybus driver to support runtime PM framework.
To enable SDIO runtime PM, it needs to remove MMC_CAP_NEEDS_POLL
and add MMC_CAP2_CORE_RUNTIME_PM in set_host_caps().
The suspend function and resume function have been tested
with micron-sdio image by sysfs. SDIO functions work well
on suspend/resume.

Testing Done: Compiled and verified on EVT2.0 + Micron ARA
              SD module with USB connector
Signed-off-by: Jackson Chang <chang_jackson@projectara.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For SPK module, each data connection corresponds to codec DAI. Now
stream state is maintained for each DAI. So, need to maintain stream
state for each DAI/data connection for individual module as well.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Runtime streams are required while configuring GB module plugged-in
during active stream. Currently, it is maintained for single stream.
However, this should be maintained for a stream corresponding to each
DAI. Fix this!
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Ensure pm runtime get_sync/put protection in codec_dai ops callback
functions before accessing apbridge.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Audio codec driver internally maintains a struct containing info about
module's data connection. Remove unused field from this struct.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently we are using dai->name to identify data connection from list
for a module. Now since we are enabling data path based on widget,
dai->name might be invalid by the time driver receives disable request
for a widget. So, use id fetched from AIF widget->sname to identify data
connection for a module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Added id field to data connection struct. This is used to identify which
data connection to use while enabling interface between module & APB.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, SPK Amp switch is used to identify when to enable data path
between module and APB. With headset, other switch controls added, it is
not possible to use this switch to control data path. Instead path
should be established based on AIF widget.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Earlier, module path was enabled based on module's control switch e.g.
'SPK Amp switch'.  Thus widget's name was sufficient to parse and
identify the direction. Now individual modules' path will be enabled
based on AIF widget status. So, it is required to get complete widget
details, say w->type is used to identify direction (playback/capture)
and w->sname is used to identify module's DATA connection used for
communication via greybus.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, the stream name for the DAI driver is generically set to "GB
Audio Playback" and "GB Audio Capture". This is OK since we use a single
interface on APB1 but that could change in the future.  Update the DAI
driver table entries to properly reflect the interface used.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Now, module is enabled/disabled based on widget event only and not
during startup/shutdown callbacks. Thus, we needn't compare codec_state
in enable/disable module helper APIs. Also, these can be further
simplified based on stream direction.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

As per current implementation, audio data is played from each individual
SPK module connected to endo frame. This is not a valid requirement in
case of capture/headset path. So, provide a mechanism to enable
individual module path based on it's control switch state.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For most of the helper functions, goto statement is widely used.  It was
originally used with an intent of single exit point for the function
with some cleanup required. This is no more the case. So, simplify code
by avoiding un-necessary gotos.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In case of Mihi, SPI bus is shared between APB1 and APB2
SPI ROMs, so their FW flashing must be sequential and
arche-platform driver should make sure that they are mutual
exclusive in nature.

So this patch adds certain restrictions to the user of the
arche-platform driver,

 - User can no longer flash APB1 and APB2 SPI ROM in parallel
 - SPI bus becomes an resource, so user must claim it by moving
   respective APB device into FW_FLASHING mode and release it
   by exiting FW_FLASHING mode. User can exit FW_FLASHING mode by
   switching to any other modes (ACTIVE, OFF, STANDBY).
 - If APB1 is in FW_FLASHING mode, APB2 can no longer enter into
   FW_FLASHING mode. User will get -EBUSY.

Having said that, while APB1 is into FW_FLASHING mode,
APB2 can independently boot from its own SPI ROM.

Testing Done: Tested by simulating usecase on EVT2.
 - Made sure that APB1 and APB2 FW_FLASHING mode is mutual exclusive
   in nature. Confirmed that an attempt on second device return -EBUSY.
 - Added simulating code, where printed state of dummy gpio for
   spi-en and verified that it shows right pin status for both APBs
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There is possible race condition in arche platform driver for
maintaining of ->state field, when shared with timesync driver.

Assume device booted fine, all connected modules have been enumerated
correctly. As part of suspend-resume operation we have pm_notifier
callback, where we turn off SVC & APB and coldboot on resume.
In the process of resume, all modules gets enumerated again, and
timesync driver does come into picture everytime.
So when timesync driver requests arche-platform to change the state
to TIMESYNC and in the middle of sync operation, if suspend gets
triggered, then execution lands into arche-platform->pm_notifier callback,
leading to race condition in the driver, where it checks for (state != ACTIVE)
in PM_SUSPEND_PREPARE and returns, but in PM_POST_SUSPEND it just simply
coldboots SVC & APB, which would inbalance all resources (including IRQ).

So we need a add check in PM_POST_SUSPEND, to make sure that, we only
coldboot devices if they are in to off state,
i.e. if (state != OFF) then return.

Testing Done: Done regressive suspend/resume testing on EVT2 platform.
Note that, I some time hit issue.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Give the USB vendor-request timeout define a more descriptive name.

Also drop the since-long obsolete comments about allowing "the SVC to do
something" and "SVC messages go down our control pipe".
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add dedicated define for ARPC CPort requests instead of using the
default timeout for USB vendor requests.

We still allow responses to take 500 ms to arrive, but note that this
adds on top of the 500ms already allowed for a requests to be
acknowledged. This should probably be tightened up at some point.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Allow user of ARPC to pass a NULL pointer for the ARPC result.

For simple requests there may only be one error code for remote errors,
or the caller may simply not care to differentiate them.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure to always set the result value for ARPC instead of forcing
every caller to do it in order to avoid compiler warnings.

The ARPC result should still be ignored unless arpc_sync returns
-EREMOTEIO.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a _req suffix to request message structures, and a _TYPE_ infix to
request type defines.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The host-device cport_ping callback expects the AP side cport id, but
was incorrectly passed the interface cport id.

Note that no host-device driver currently implements this callback, and
that it is soon even to be removed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove some no-longer-needed braces around an error path.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove the unused protocol-version messages.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The 'GB_AUDIO_TYPE_GET_TX_DELAY' and 'GB_AUDIO_TYPE_GET_RX_DELAY'
are no longer a part of the Greybus Audio Device Class Protocol
so remove support for them.  The message numbers are not coalesced
to prevent compatibility issues between the AP and the module.

Testing Done: Played music using a speaker module
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The 'AUDIO_APBRIDGEA_TYPE_GET_TX_DELAY' and
'AUDIO_APBRIDGEA_TYPE_GET_RX_DELAY' message types have been
removed from the AP <-> APBrigdeA Audio Protocol so remove
them from the code.  Do not coalesce the message type numbers
to prevent compatibility issues between the AP and APBridgeA.

Testing Done: Played music using a speaker module
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If we failed to synchronize the FrameTime it would be useful to know how
many of the expected strobes arrived, for example a value of 0/5 would
indicate the SVC was completely dead but a value of 4/5 would indicate one
GPIO pulse got lost i.e. the AP was too slow reacting to an interrupt and
completely missed one of the strobe events. In either case the actual
number of strobes is a useful thing to print out.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The guard for initiating a new synchronization operation should allow for
that resync to happen in every single state except for INVALID. This patch
fixes by ensuring the guard does just that. With local testing it was
possible to break a sync to a Module. This hasn't been observed in a buglog
but should be fixed anyway.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: David Lin <dtwlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It's possible the AP could miss an incoming SVC timesync pulse i.e. the AP
could have interrupts switched off for long enough that one SVC GPIO strobe
ends up over-lapping another one. TimeSync should be able to deal with this
type of transitory failure by retrying a failed synchronous TimeSync resync
up to 'n' number of times. For this patch 'n' has been set to five, which
is a hand-wavy choice that 'feels' right.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Instead of using the queue_delayed_work call for delayed work on
system_wq, use the schedule_delayed_work helper to be more consistent on
the style.

Testing Done:
 - Check SVC watchdog is pining after the change.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There is an issue that when an interface failed to be enabled due to
timesync failure, a previously added control device is not deleted as
part of the error clean-up. This causes a leak in the sysfs file when
the interface is disabled. This would eventually cause this particular
interface to be unable to register future control device even after
unipro_reset. See failure logs below:

[  906.495261] greybus 1-3.3: failed to add to timesync: -19
[  906.516497] greybus 1-3.3: failed to re-enable interface: -19
[  907.016016] greybus 1-3.3: Interface removed
...
[ 1623.677343] ------------[ cut here ]------------
[ 1623.681116] WARNING: at kernel/arche/fs/sysfs/dir.c:530 sysfs_add_one+0x98/0xb4()
[ 1623.681128] sysfs: cannot create duplicate filename '/bus/greybus/devices/1-3.3.ctrl'
[ 1623.681252] Call trace:
[ 1623.681265] [<ffffffc000207b40>] dump_backtrace+0x0/0x268
[ 1623.681272] [<ffffffc000207db8>] show_stack+0x10/0x1c
[ 1623.681284] [<ffffffc000ccb890>] dump_stack+0x1c/0x28
[ 1623.681295] [<ffffffc00021f9dc>] warn_slowpath_common+0x74/0x9c
[ 1623.681301] [<ffffffc00021fa60>] warn_slowpath_fmt+0x5c/0x80
[ 1623.681307] [<ffffffc000366624>] sysfs_add_one+0x94/0xb4
[ 1623.681315] [<ffffffc0003670b4>] sysfs_do_create_link_sd+0x100/0x1c8
[ 1623.681320] [<ffffffc0003671a8>] sysfs_create_link+0x2c/0x38
[ 1623.681332] [<ffffffc0005d5890>] bus_add_device+0xd8/0x190
[ 1623.681338] [<ffffffc0005d39ec>] device_add+0x2b4/0x604
[ 1623.681349] [<ffffffbffc006dfc>] gb_control_add+0x10/0x40 [greybus]
[ 1623.681362] [<ffffffbffc003dac>] gb_interface_enable+0x20c/0x3b8 [greybus]
[ 1623.681373] [<ffffffbffc002a30>] gb_module_add+0x124/0x174 [greybus]
[ 1623.681385] [<ffffffbffc0082cc>] gb_svc_intf_set_power_mode+0xdd4/0xfe8 [greybus]
[ 1623.681394] [<ffffffc00023888c>] process_one_work+0x268/0x3c8
[ 1623.681400] [<ffffffc000239a64>] worker_thread+0x204/0x358
[ 1623.681410] [<ffffffc00023f43c>] kthread+0xb8/0xc4
[ 1623.681414] ---[ end trace 44489577dd9220db ]---
[ 1623.681818] greybus 1-3.3.ctrl: failed to register control device: -17

Testing Done:
 - Continuous unipro_reset stress test
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix ARPC active-list corruption due to incorrect list-interface usage.

The corruption manifested itself as ARPC timeouts due to expected
responses not being recognised whenever more than one ARPC was active.

This could be seen for example when two interfaces were being runtime
suspended in parallel:

[  165.739896] usb 1-1.1: invalid arpc response id received: 13
[  165.794743] greybus 1-5.5: gb_interface_refclk_set - 0
[  166.241202] usb 1-1.1: failed to execute ARPC: -110

Fortunately the impact of this bug has so far been limited to such
timeouts and error messages due to ARPC currently only being used for
CPort reset in the connection tear-down path.
Reported-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing le16_to_cpu() to an ARPC error message in the receive path,
and also use %u to print the unsigned id.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The wrong pointer was checked for allocation failures when allocating
the ARPC response buffer, something which would lead to allocation
failures going undetected.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Replace all occurrences of the term "Ara" with "GMP" in core.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Refer to the MDK as GMP MDK.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Inline with other properties used for arche-platform driver,
rename ara,init-disable => arche,init-disable.

Testing Done: Boot tested on EVT2 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Change ARA prefix to GB_CAM for greyus camera specific
formats.

Change-Id: I1a0552516e8ea727c48085c59fc49f2409a89486
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Blagovest Borisov Kolenichev <kolenichev_blagovest@projectara.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>

There's an issue that the userspace is not able to control both the
enumerated control and DAPM widget when audio bundle is in the SUSPEND
state. This patch fixes the issue by adding pm_runtime_get/put() calls
for the both controls.

Testing Done:
 - Use tinymix to get and put both enumerated control and DAPM widget as
   the followings, and observe audio bundle is able to wake up from
   suspend.

$ tinymix "GB 3 PB source" 1
$ tinymix "GB 3 PB source"
GB 3 PB source:	AIF1	>AIF2

$ tinymix "GB 3 AIF1_RX MUX" 2
$ tinymix "GB 3 AIF1_RX MUX"
GB 3 AIF1_RX MUX:	Stereo	Left	>Right
Reported-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, AP performs unipro_reset if SVC fails to response to its
ping. While this error recovery is best suited for the end-user
experience, errors in the UniPro network could potentially go unnoticed
by the QA and fishfooders in the development phase of the project. This
patch adds an option to trigger a kernel panic so logs can be collected
for analysis.

Testing Done:
 - Reproduce issue and observe kernel panic when
   watchdob_control is changed to 'panic'
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>