- 01 Jul, 2009 36 commits
-
-
Frederic Weisbecker authored
Fix a confusion while giving the size of a callchain list during its allocation. We are using the wrong structure size. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246419315-9968-2-git-send-email-fweisbec@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: this branch was on a .30-ish base before, update it to an almost-.31-rc2 upstream base to pick up fixes. Signed-off-by: -
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Inform kmemleak about pid_hash kmemleak: Do not warn if an unknown object is freed kmemleak: Do not report new leaked objects if the scanning was stopped kmemleak: Slightly change the policy on newly allocated objects kmemleak: Do not trigger a scan when reading the debug/kmemleak file kmemleak: Simplify the reports logged by the scanning thread kmemleak: Enable task stacks scanning by default kmemleak: Allow the early log buffer to be configurable.
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm table: fix blk_stack_limits arg to use bytes not sectors dm exception store: really fix type lookup
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits) perf report: Add --symbols parameter perf report: Add --comms parameter perf report: Add --dsos parameter perf_counter tools: Adjust only prelinked symbol's addresses perf_counter: Provide a way to enable counters on exec perf_counter tools: Reduce perf stat measurement overhead/skew perf stat: Use percentages for scaling output perf_counter, x86: Update x86_pmu after WARN() perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run perf stat: Improve output perf stat: Fix multi-run stats perf stat: Add -n/--null option to run without counters perf_counter tools: Remove dead code perf_counter: Complete counter swap perf report: Print sorted callchains per histogram entries perf_counter tools: Prepare a small callchain framework perf record: Fix unhandled io return value perf_counter tools: Add alias for 'l1d' and 'l1i' perf-report: Add bare minimum PERF_EVENT_READ parsing perf-report: Add modes for inherited stats and no-samples ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Add Fenghua Yu as temporary co-maintainer for ia64 [IA64] address compiler warnings perfmon.c/salinfo.c [IA64] Remove unnecessary semicolons [IA64] sprintf should not be used with same source & destination address
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
-
Wolfgang Illmeyer authored
Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be read/written through hostfs. This patch initializes the maximum file size to MAX_LFS_SIZE. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13531Signed-off-by:
Wolfgang Illmeyer <wolfgang@illmeyer.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
A crappy macro prevents us unlocking on a fail path. Expand the macro and unlock appropriatelly. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Frysinger authored
Make sure we do not actually request the RTC IRQ until the device driver is fully ready to handle and process any interrupt. This way a spurious interrupt won't crash the system (which may happen if the bootloader was poking the RTC right before booting Linux). Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Ville Syrjala authored
Block writes require 64 byte alignment. Since block writes could be used with SGRAM or WRAM also refine the memory type detection to check for either type before deciding to use the 64 byte alignment. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Tested-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ville Syrjala authored
Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms the hardware. The BIOS will simply hang after a reboot. Fix the problem by restoring the hardware to it's original state on reboot. Signed-off-by:
-
Baruch Siach authored
IRQ handling is wrong for any GPIO >= PL061_GPIO_NR. Fix this by implementing and using a proper .to_irq method. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Baruch Siach authored
Note that IRQ has not been initialized when kmalloc() fails. Also, use DECLARE_BITMAP() to make the code clearer. Signed-off-by:
-
Yinghai Lu authored
Nathan reported that | commit 73d60b7f | Author: Yinghai Lu <yinghai@kernel.org> | Date: Tue Jun 16 15:33:00 2009 -0700 | | page-allocator: clear N_HIGH_MEMORY map before we set it again | | SRAT tables may contains nodes of very small size. The arch code may | decide to not activate such a node. However, currently the early boot | code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be | active although these nodes have no present pages. | | For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too unintentionally and incorrectly clears the cpuset.mems cgroup attribute on an i386 kvm guest, meaning that cpuset.mems can not be used. Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only. and need to do save/restore for that in find_zone_movable_pfn Reported-by:
Nathan Lynch <ntl@pobox.com> Tested-by:
Yinghai Lu <yinghai@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by:
-
Nikanth Karthikesan authored
By writing a tasks's pid to the file, a process adds that task to that cgroup/cpuset. But to add a cpu/mem to a cpuset, the new list of cpus should be written to the cpuset.mems file which would replace the old list of cpus. Make this clearer in the documentation. Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Richard Kennedy authored
balance_dirty_pages can overreact and move all of the dirty pages to writeback unnecessarily. balance_dirty_pages makes its decision to throttle based on the number of dirty plus writeback pages that are over the calculated limit,so it will continue to move pages even when there are plenty of pages in writeback and less than the threshold still dirty. This allows it to overshoot its limits and move all the dirty pages to writeback while waiting for the drives to catch up and empty the writeback list. A simple fio test easily demonstrates this problem. fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10 This is the simplest fix I could find, but I'm not entirely sure that it alone will be enough for all cases. But it certainly is an improvement on my desktop machine writing to 2 disks. Do we need something more for machines with large arrays where bdi_threshold * number_of_drives is greater than the dirty_ratio ? Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Renaud Lottiaux authored
The file opened in acct_on and freshly stored in the ns->bacct struct can be closed in acct_file_reopen by a concurrent call after we release acct_lock and before we call mntput(file->f_path.mnt). Record file->f_path.mnt in a local variable and use this variable only. Signed-off-by:
Renaud Lottiaux <renaud.lottiaux@kerlabs.com> Signed-off-by:
Louis Rilling <louis.rilling@kerlabs.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Joe Perches authored
Ion's cs.columbia.edu email address no longer works. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Ion Badulescu <ionut@badula.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Zhang Rui authored
When the 32-bit signed quantities get assigned to the u64 resource_size_t, they are incorrectly sign-extended. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13253 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9905Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Reported-by:
Leann Ogasawara <leann@ubuntu.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Reported-by: <pablomme@googlemail.com> Tested-by: <pablomme@googlemail.com> Cc: <stable@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
David Brownell authored
Bugfix to spi_bitbang infrastructure: make sure to always set transfer parameters on the first pass through the message's per-transfer loop. This can matter with drivers that replace the per-word or per-buffer transfer primitives, on busses with multiple SPI devices. Previously, this could have started messages using the settings left after previous messages. The problem was observed when a high speed chip (m25p80 type flash) was running very slowly because a low speed device (avr8 microcontroller) had previously used the bus. Similar faults could have driven the low speed device too fast, or used an unexpected word size. Acked-by:
Steven A. Falco <sfalco@harris.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Krzysztof Helt authored
Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by:
-
David Brownell authored
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by:
-
Thomas Gleixner authored
show_pools() walks the page_list of a pool w/o protection against the list modifications in alloc/free. Take pool->lock to avoid stomping into nirvana. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Bryan Donlan authored
ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to report errors to NFS properly. However, in ext[234]_lookup(), this -ESTALE can be propagated to userspace if the filesystem is corrupted such that a directory entry references a deleted inode. This leads to a misleading error message - "Stale NFS file handle" - and confusion on the part of the admin. The bug can be easily reproduced by creating a new filesystem, making a link to an unused inode using debugfs, then mounting and attempting to ls -l said link. This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE from ext2_iget(), as ext2 does for other filesystem metadata corruption; and also invokes the appropriate ext*_error functions when this case is detected. Signed-off-by:
Bryan Donlan <bdonlan@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
With ELF, at generating coredump, some more headers other than used vmas are added. When max_map_count == 65536, a core generated by following kinds of code can be unreadable because the number of ELF's program header is written in 16bit in Ehdr (please see elf.h) and the number overflows. == ... = mmap(); (munmap, mprotect, etc...) if (failed) abort(); == This can happen in mmap/munmap/mprotect/etc...which calls split_vma(). I think 65536 is not safe as _default_ and reduce it to 65530 is good for avoiding unexpected corrupted core. Anyway, max_map_count can be enlarged by sysctl if a user is brave.. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jakub Jelinek <jakub@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Yang Shi authored
Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory type for MPC85xx EDAC. Signed-off-by:
Yang Shi <yang.shi@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by:
-
Michael Buesch authored
Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: I/O ports at 0030 [size=8] Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 65 Region 0: I/O ports at 0020 [size=8] Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 65 Region 0: I/O ports at 0010 [size=8] Region 1: I/O ports at <unassigned> Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by:Michael Buesch <mb@bu3sch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Peter Oberparleiter authored
Commonly available versions of cp and tar don't work well with special files created using seq_file. Mention this problem in the gcov documentation and update the helper script example to work around these problems. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Tejun Heo authored
alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for modules to work around addressing range limitation. This is done via generating inline assembly using C preprocessing which forces the assembler to generate external reference. This happens behind the compiler's back and makes the compiler think that static percpu variables in modules are unused. This used to be worked around by using __unused attribute for percpu variables which prevent the compiler from omitting the variable; however, recent declare/definition attribute unification change broke this as __used can't be used for declaration. Also, in the process, PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken. This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions and make alpha use it to add __used for percpu variables in modules. This also fixes the PER_CPU_ATTRIBUTES double definition bug. Signed-off-by:
Tejun Heo <tj@kernel.org> Tested-by:
maximilian attems <max@stro.at> Acked-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: <stable@kernel.org> Signed-off-by:
-
Stephen Rothwell authored
When building with a 4.1.x compiler on powerpc64 (at least) we get this error: drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict This was introduced by commit ae52bb23 ("fbdev: move logo externs to header file"). This is a partial revert of that commit sufficient to not hit the compiler bug. Also convert _clut arrays from __initconst to __initdata. Sam said: Al analysed this some time ago. When we say something is const then _sometimes_ gcc annotate the section as const(?) - sometimes not. So if we have two variables/functions annotated __*const and gcc decides to annotate the section const only in one case we get a section type conflict. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Joe Perches authored
As per Ranganathan's request. Signed-off-by:
-
Heiko Carstens authored
The ctors section for each object file is eight byte aligned (on 64 bit). However the __ctors_start symbol starts at an arbitrary address dependent on the size of the previous sections. Therefore the linker may add some zeroes after __ctors_start to make sure the ctors contents are properly aligned. However the extra zeroes at the beginning aren't expected by the code. When walking the functions pointers contained in there and extra zeroes are added this may result in random jumps. So make sure that the __ctors_start symbol is always aligned as well. Fixes this crash on an allyesconfig on s390: [ 0.582482] Kernel BUG at 0000000000000012 [verbose debug info unavailable] [ 0.582489] illegal operation: 0001 [#1] SMP DEBUG_PAGEALLOC [ 0.582496] Modules linked in: [ 0.582501] CPU: 0 Tainted: G W 2.6.31-rc1-dirty #273 [ 0.582506] Process swapper (pid: 1, task: 000000003f218000, ksp: 000000003f2238e8) [ 0.582510] Krnl PSW : 0704200180000000 0000000000000012 (0x12) [ 0.582518] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 [ 0.582524] Krnl GPRS: 0000000000036727 0000000000000010 0000000000000001 0000000000000001 [ 0.582529] 00000000001dfefa 0000000000000000 0000000000000000 0000000000000040 [ 0.582534] 0000000001fff0f0 0000000001790628 0000000002296048 0000000002296048 [ 0.582540] 00000000020c438e 0000000001786000 0000000002014a66 000000003f223e60 [ 0.582553] Krnl Code:>0000000000000012: 0000 unknown [ 0.582559] 0000000000000014: 0000 unknown [ 0.582564] 0000000000000016: 0000 unknown [ 0.582570] 0000000000000018: 0000 unknown [ 0.582575] 000000000000001a: 0000 unknown [ 0.582580] 000000000000001c: 0000 unknown [ 0.582585] 000000000000001e: 0000 unknown [ 0.582591] 0000000000000020: 0000 unknown [ 0.582596] Call Trace: [ 0.582599] ([<0000000002014a46>] kernel_init+0x622/0x7a0) [ 0.582607] [<0000000000113e22>] kernel_thread_starter+0x6/0xc [ 0.582615] [<0000000000113e1c>] kernel_thread_starter+0x0/0xc [ 0.582621] INFO: lockdep is turned off. [ 0.582624] Last Breaking-Event-Address: [ 0.582627] [<0000000002014a64>] kernel_init+0x640/0x7a0 Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Davide Libenzi authored
Change the eventfd interface to de-couple the eventfd memory context, from the file pointer instance. Without such change, there is no clean way to racely free handle the POLLHUP event sent when the last instance of the file* goes away. Also, now the internal eventfd APIs are using the eventfd context instead of the file*. This patch is required by KVM's IRQfd code, which is still under development. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Avi Kivity <avi@redhat.com> Signed-off-by:
-
- 30 Jun, 2009 4 commits
-
-
Anton Blanchard authored
Add a dso for hypervisor samples. We don't get any symbol information on the ppc64 hypervisor but this at least gives us a high level summary of the time spent in there. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org LKML-Reference: <20090630230141.182536873@samba.org> Signed-off-by:
-
Anton Blanchard authored
PERF_EVENT_MISC_* is not a bitmask, so we have to mask and compare. Signed-off-by:
-
Anton Blanchard authored
Filter out some ppc64 specific idle loop functions and remove leading '.' on ppc64 text symbols. Signed-off-by:
-
Anton Blanchard authored
Move the list of symbols we skip into an array, making it easier to add new ones. Signed-off-by:
-
