Pull dlm updates from David Teigland:
 "This set of patches has some minor fixes for message handling, some
  misc cleanups, and updates the maintainers entry"

* tag 'dlm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  MAINTAINERS: Update dlm maintainer and web page
  dlm: slow down filling up processing queue
  dlm: fix no ack after final message
  dlm: be sure we reset all nodes at forced shutdown
  dlm: fix remove member after close call
  dlm: fix creating multiple node structures
  fs: dlm: Remove some useless memset()
  fs: dlm: Fix the size of a buffer in dlm_create_debug_file()
  fs: dlm: Simplify buffer size computation in dlm_create_debug_file()

We consistently switched from kmalloc() to vmalloc() in module
decompression to prevent potential memory allocation failures with large
modules, however vmalloc() is not as memory-efficient and fast as
kmalloc().

Since we don't know in general the size of the workspace required by the
decompression algorithm, it is more reasonable to use kvmalloc()
consistently, also considering that we don't have special memory
requirements here.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull integrity updates from Mimi Zohar:
 "Four integrity changes: two IMA-overlay updates, an integrity Kconfig
  cleanup, and a secondary keyring update"

* tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: detect changes to the backing overlay file
  certs: Only allow certs signed by keys on the builtin keyring
  integrity: fix indentation of config attributes
  ima: annotate iint mutex to avoid lockdep false positive warnings

Pull modules updates from Luis Chamberlain:
 "The only thing worth highligthing is that gzip moves to use vmalloc()
  instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.

  The rest is regular house keeping, keeping things neat, tidy, and
  boring"

[ The kmalloc -> vmalloc conversion is not the right approach.

  Unless you know you need huge areas or know you need to use virtual
  mappings for some reason (playing with protection bits or whatever),
  you should use kvmalloc()/kvfree, which automatically picks the right
  allocation model    - Linus ]

* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Annotate struct module_notes_attrs with __counted_by
  module: Fix comment typo
  module: Make is_valid_name() return bool
  module: Make is_mapping_symbol() return bool
  module/decompress: use vmalloc() for gzip decompression workspace
  MAINTAINERS: add include/linux/module*.h to modules
  module: Clarify documentation of module_param_call()

Pull sysctl updates from Luis Chamberlain:
 "To help make the move of sysctls out of kernel/sysctl.c not incur a
  size penalty sysctl has been changed to allow us to not require the
  sentinel, the final empty element on the sysctl array. Joel Granados
  has been doing all this work. On the v6.6 kernel we got the major
  infrastructure changes required to support this. For v6.7-rc1 we have
  all arch/ and drivers/ modified to remove the sentinel. Both arch and
  driver changes have been on linux-next for a bit less than a month. It
  is worth re-iterating the value:

   - this helps reduce the overall build time size of the kernel and run
     time memory consumed by the kernel by about ~64 bytes per array

   - the extra 64-byte penalty is no longer inncurred now when we move
     sysctls out from kernel/sysctl.c to their own files

  For v6.8-rc1 expect removal of all the sentinels and also then the
  unneeded check for procname == NULL.

  The last two patches are fixes recently merged by Krister Johansen
  which allow us again to use softlockup_panic early on boot. This used
  to work but the alias work broke it. This is useful for folks who want
  to detect softlockups super early rather than wait and spend money on
  cloud solutions with nothing but an eventual hung kernel. Although
  this hadn't gone through linux-next it's also a stable fix, so we
  might as well roll through the fixes now"

* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
  watchdog: move softlockup_panic back to early_param
  proc: sysctl: prevent aliased sysctls from getting passed to init
  intel drm: Remove now superfluous sentinel element from ctl_table array
  Drivers: hv: Remove now superfluous sentinel element from ctl_table array
  raid: Remove now superfluous sentinel element from ctl_table array
  fw loader: Remove the now superfluous sentinel element from ctl_table array
  sgi-xp: Remove the now superfluous sentinel element from ctl_table array
  vrf: Remove the now superfluous sentinel element from ctl_table array
  char-misc: Remove the now superfluous sentinel element from ctl_table array
  infiniband: Remove the now superfluous sentinel element from ctl_table array
  macintosh: Remove the now superfluous sentinel element from ctl_table array
  parport: Remove the now superfluous sentinel element from ctl_table array
  scsi: Remove now superfluous sentinel element from ctl_table array
  tty: Remove now superfluous sentinel element from ctl_table array
  xen: Remove now superfluous sentinel element from ctl_table array
  hpet: Remove now superfluous sentinel element from ctl_table array
  c-sky: Remove now superfluous sentinel element from ctl_talbe array
  powerpc: Remove now superfluous sentinel element from ctl_table arrays
  riscv: Remove now superfluous sentinel element from ctl_table array
  x86/vdso: Remove now superfluous sentinel element from ctl_table array
  ...

Pull documentation updates from Jonathan Corbet:
 "The number of commits for documentation is not huge this time around,
  but there are some significant changes nonetheless:

   - Some more Spanish-language and Chinese translations

   - The much-discussed documentation of the confidential-computing
     threat model

   - Powerpc and RISCV documentation move under Documentation/arch -
     these complete this particular bit of documentation churn

   - A large traditional-Chinese documentation update

   - A new document on backporting and conflict resolution

   - Some kernel-doc and Sphinx fixes

  Plus the usual smattering of smaller updates and typo fixes"

* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
  scripts/kernel-doc: Fix the regex for matching -Werror flag
  docs: backporting: address feedback
  Documentation: driver-api: pps: Update PPS generator documentation
  speakup: Document USB support
  doc: blk-ioprio: Bring the doc in line with the implementation
  docs: usb: fix reference to nonexistent file in UVC Gadget
  docs: doc-guide: mention 'make refcheckdocs'
  Documentation: fix typo in dynamic-debug howto
  scripts/kernel-doc: match -Werror flag strictly
  Documentation/sphinx: Remove the repeated word "the" in comments.
  docs: sparse: add SPDX-License-Identifier
  docs/zh_CN: Add subsystem-apis Chinese translation
  docs/zh_TW: update contents for zh_TW
  docs: submitting-patches: encourage direct notifications to commenters
  docs: add backporting and conflict resolution document
  docs: move riscv under arch
  docs: update link to powerpc/vmemmap_dedup.rst
  mm/memory-hotplug: fix typo in documentation
  docs: move powerpc under arch
  PCI: Update the devres documentation regarding to pcim_*()
  ...

Merge tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - kbuild kselftest-merge target fixes

 - fixes to several tests

 - resctrl test fixes and enhancements

 - ksft_perror() helper and reporting improvements

 - printf attribute to kselftest prints to improve reporting

 - documentation and clang build warning fixes

The bulk of the patches are for resctrl fixes and enhancements.

* tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (51 commits)
  selftests/resctrl: Fix MBM test failure when MBA unavailable
  selftests/clone3: Report descriptive test names
  selftests:modify the incorrect print format
  selftests/efivarfs: create-read: fix a resource leak
  selftests/ftrace: Add riscv support for kprobe arg tests
  selftests/ftrace: add loongarch support for kprobe args char tests
  selftests/amd-pstate: Added option to provide perf binary path
  selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut
  selftests/resctrl: Move run_benchmark() to a more fitting file
  selftests/resctrl: Fix schemata write error check
  selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
  selftests/resctrl: Fix feature checks
  selftests/resctrl: Refactor feature check to use resource and feature name
  selftests/resctrl: Move _GNU_SOURCE define into Makefile
  selftests/resctrl: Remove duplicate feature check from CMT test
  selftests/resctrl: Extend signal handler coverage to unmount on receiving signal
  selftests/resctrl: Fix uninitialized .sa_flags
  selftests/resctrl: Cleanup benchmark argument parsing
  selftests/resctrl: Remove ben_count variable
  selftests/resctrl: Make benchmark command const and build it with pointers
  ...

Merge tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

 - string-stream testing enhancements

 - several fixes memory leaks

 - fix to reset status during parameter handling

* tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: test: Fix the possible memory leak in executor_test
  kunit: Fix possible memory leak in kunit_filter_suites()
  kunit: Fix the wrong kfree of copy for kunit_filter_suites()
  kunit: Fix missed memory release in kunit_free_suite_set()
  kunit: Reset test status on each param iteration
  kunit: string-stream: Test performance of string_stream
  kunit: Use string_stream for test log
  kunit: string-stream: Add tests for freeing resource-managed string_stream
  kunit: string-stream: Decouple string_stream from kunit
  kunit: string-stream: Add kunit_alloc_string_stream()
  kunit: Don't use a managed alloc in is_literal()
  kunit: string-stream-test: Add cases for string_stream newline appending
  kunit: string-stream: Add option to make all lines end with newline
  kunit: string-stream: Improve testing of string_stream
  kunit: string-stream: Don't create a fragment for empty strings

Pull iommufd updates from Jason Gunthorpe:
 "This brings three new iommufd capabilities:

   - Dirty tracking for DMA.

     AMD/ARM/Intel CPUs can now record if a DMA writes to a page in the
     IOPTEs within the IO page table. This can be used to generate a
     record of what memory is being dirtied by DMA activities during a
     VM migration process. A VMM like qemu will combine the IOMMU dirty
     bits with the CPU's dirty log to determine what memory to transfer.

     VFIO already has a DMA dirty tracking framework that requires PCI
     devices to implement tracking HW internally. The iommufd version
     provides an alternative that the VMM can select, if available. The
     two are designed to have very similar APIs.

   - Userspace controlled attributes for hardware page tables
     (HWPT/iommu_domain). There are currently a few generic attributes
     for HWPTs (support dirty tracking, and parent of a nest). This is
     an entry point for the userspace iommu driver to control the HW in
     detail.

   - Nested translation support for HWPTs. This is a 2D translation
     scheme similar to the CPU where a DMA goes through a first stage to
     determine an intermediate address which is then translated trough a
     second stage to a physical address.

     Like for CPU translation the first stage table would exist in VM
     controlled memory and the second stage is in the kernel and matches
     the VM's guest to physical map.

     As every IOMMU has a unique set of parameter to describe the S1 IO
     page table and its associated parameters the userspace IOMMU driver
     has to marshal the information into the correct format.

     This is 1/3 of the feature, it allows creating the nested
     translation and binding it to VFIO devices, however the API to
     support IOTLB and ATC invalidation of the stage 1 io page table,
     and forwarding of IO faults are still in progress.

  The series includes AMD and Intel support for dirty tracking. Intel
  support for nested translation.

  Along the way are a number of internal items:

   - New iommu core items: ops->domain_alloc_user(),
     ops->set_dirty_tracking, ops->read_and_clear_dirty(),
     IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user

   - UAF fix in iopt_area_split()

   - Spelling fixes and some test suite improvement"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (52 commits)
  iommufd: Organize the mock domain alloc functions closer to Joerg's tree
  iommufd/selftest: Fix page-size check in iommufd_test_dirty()
  iommufd: Add iopt_area_alloc()
  iommufd: Fix missing update of domains_itree after splitting iopt_area
  iommu/vt-d: Disallow read-only mappings to nest parent domain
  iommu/vt-d: Add nested domain allocation
  iommu/vt-d: Set the nested domain to a device
  iommu/vt-d: Make domain attach helpers to be extern
  iommu/vt-d: Add helper to setup pasid nested translation
  iommu/vt-d: Add helper for nested domain allocation
  iommu/vt-d: Extend dmar_domain to support nested domain
  iommufd: Add data structure for Intel VT-d stage-1 domain allocation
  iommu/vt-d: Enhance capability check for nested parent domain allocation
  iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs
  iommufd/selftest: Add nested domain allocation for mock domain
  iommu: Add iommu_copy_struct_from_user helper
  iommufd: Add a nested HW pagetable object
  iommu: Pass in parent domain with user_data to domain_alloc_user op
  iommufd: Share iommufd_hwpt_alloc with IOMMUFD_OBJ_HWPT_NESTED
  iommufd: Derive iommufd_hwpt_paging from iommufd_hw_pagetable
  ...

Pull more networking updates from Jakub Kicinski:

 - Support GRO decapsulation for IPsec ESP in UDP

 - Add a handful of MODULE_DESCRIPTION()s

 - Drop questionable alignment check in TCP AO to avoid
   build issue after changes in the crypto tree

* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
  net: tcp: remove call to obsolete crypto_ahash_alignmask()
  net: fill in MODULE_DESCRIPTION()s under drivers/net/
  net: fill in MODULE_DESCRIPTION()s under net/802*
  net: fill in MODULE_DESCRIPTION()s under net/core
  net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
  xfrm: policy: fix layer 4 flowi decoding
  xfrm Fix use after free in __xfrm6_udp_encap_rcv.
  xfrm: policy: replace session decode with flow dissector
  xfrm: move mark and oif flowi decode into common code
  xfrm: pass struct net to xfrm_decode_session wrappers
  xfrm: Support GRO for IPv6 ESP in UDP encapsulation
  xfrm: Support GRO for IPv4 ESP in UDP encapsulation
  xfrm: Use the XFRM_GRO to indicate a GRO call on input
  xfrm: Annotate struct xfrm_sec_ctx with __counted_by
  xfrm: Remove unused function declarations

Pull probes updates from Masami Hiramatsu:
 "Cleanups:

   - kprobes: Fixes typo in kprobes samples

   - tracing/eprobes: Remove 'break' after return

  kretprobe/fprobe performance improvements:

   - lib: Introduce new `objpool`, which is a high performance lockless
     object queue. This uses per-cpu ring array to allocate/release
     objects from the pre-allocated object pool.

     Since the index of ring array is a 32bit sequential counter, we can
     retry to push/pop the object pointer from the ring without lock (as
     seq-lock does)

   - lib: Add an objpool test module to test the functionality and
     evaluate the performance under some circumstances

   - kprobes/fprobe: Improve kretprobe and rethook scalability
     performance with objpool.

     This improves both legacy kretprobe and fprobe exit handler (which
     is based on rethook) to be scalable on SMP systems. Even with
     8-threads parallel test, it shows a great scalability improvement

   - Remove unneeded freelist.h which is replaced by objpool

   - objpool: Add maintainers entry for the objpool

   - objpool: Fix to remove unused include header lines"

* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: unused header files removed
  MAINTAINERS: objpool added
  kprobes: freelist.h removed
  kprobes: kretprobe scalability improvement
  lib: objpool test module added
  lib: objpool added: ring-array based lockless MPMC
  tracing/eprobe: drop unneeded breaks
  samples: kprobes: Fixes a typo

Pull bootconfig updates from Masami Hiramatsu:

 - Documentation update for /proc/cmdline, which includes both the
   parameters from bootloader and the embedded parameters in the kernel

 - fs/proc: Add bootloader argument as a comment line to
   /proc/bootconfig so that the user can distinguish what parameters
   were passed from bootloader even if bootconfig modified that

 - Documentation fix to add /proc/bootconfig to proc.rst

* tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  doc: Add /proc/bootconfig to proc.rst
  fs/proc: Add boot loader arguments as comment to /proc/bootconfig
  doc: Update /proc/cmdline documentation to include boot config

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

 - The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

 - The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

Pull ARM SoC code updates from Arnd Bergmann:
 "The AMD Pensando DPU platform gets added to arm64, and some minor
  updates make it into Renesas' 32-bit platforms"

* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
  arm64: Add config for AMD Pensando SoC platforms
  MAINTAINERS: Add entry for AMD PENSANDO
  ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
  ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Remove unneeded once handling

Pull ARM defconfig updates from Arnd Bergmann:
 "These are the usual trivial changes to enable a couple of newly added
  device drivers and remove lines for Kconfig options that are no longer
  needed"

* tag 'soc-defconfig-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: enable DisplayPort altmode support
  arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
  arm64: defconfig: add various drivers for Amlogic based boards
  ARM: config: aspeed: Remove FIRMWARE_MEMMAP
  ARM: config: aspeed_g5: Enable SSIF BMC driver
  ARM: config: aspeed: Add Ampere SMPro drivers
  ARM: config: aspeed: Add new FSI drivers
  arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A
  ARM: exynos_defconfig: add driver for ISL29018
  ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
  arm64: defconfig: Enable RZ/G3S (R9A08G045) SoC
  ARM: multi_v7_defconfig: add tm2-touchkey driver
  ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
  ARM: multi_v7_defconfig: add AHCI_DWC driver
  ARM: multi_v7_defconfig: make Exynos related PHYs modules
  ARM: s5pv210_defconfig: enable IIO required by MAX17040
  ARM: shmobile: defconfig: Refresh for v6.6-rc3
  ARM: defconfig: cleanup orphaned CONFIGs
  arm64: defconfig: Enable Samsung DSIM driver
  arm64: defconfig: Enable CONFIG_USB_MASS_STORAGE
  ...

Pull SoC driver updates from Arnd Bergmann:
 "The highlights for the driver support this time are

   - Qualcomm platforms gain support for the Qualcomm Secure Execution
     Environment firmware interface to access EFI variables on certain
     devices, and new features for multiple platform and firmware
     drivers.

   - Arm FF-A firmware support gains support for v1.1 specification
     features, in particular notification and memory transaction
     descriptor changes.

   - SCMI firmware support now support v3.2 features for clock and DVFS
     configuration and a new transport for Qualcomm platforms.

   - Minor cleanups and bugfixes are added to pretty much all the active
     platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
     amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
     more.

     In particular, this contains portions of the treewide conversion to
     use __counted_by annotations and the device_get_match_data helper"

* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
  soc: qcom: pmic_glink_altmode: Print return value on error
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: scm: add a missing forward declaration for struct device
  firmware: qcom: move Qualcomm code into its own directory
  soc: samsung: exynos-chipid: Convert to platform remove callback returning void
  soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
  soc: qcom: pmic_glink: fix connector type to be DisplayPort
  soc: ti: k3-socinfo: Avoid overriding return value
  soc: ti: k3-socinfo: Fix typo in bitfield documentation
  soc: ti: knav_qmss_queue: Use device_get_match_data()
  firmware: ti_sci: Use device_get_match_data()
  firmware: qcom: qseecom: add missing include guards
  soc/pxa: ssp: Convert to platform remove callback returning void
  soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
  soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
  soc/loongson: loongson2_guts: Convert to platform remove callback returning void
  soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
  soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
  ...

Pull SoC DT updates from Arnd Bergmann:
 "There are a couple new SoCs that are supported for the first time:

   - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
     cores

   - Sophgo makes RISC-V based chips, and we now support the CV1800B
     chip used in the milkv-duo board and the massive sg2042 chip in the
     milkv-pioneer, a 64-core developer workstation.

   - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
     7c and gets added with some Xiaomi phones

   - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
     and the RZ/G3S (R9A08G045) embedded SoC.

  There are also a bunch of newly supported machines that use already
  supported chips. On the 32-bit side, we have:

   - USRobotics USR8200 is a NAS/Firewall/router based on the ancient
     Intel IXP4xx platform

   - A couple of machines based on the NXP i.MX5 and i.MX6 platforms

   - One machine each for Allwinner V3s, Aspeed AST2600, Microchip
     sama5d29 and ST STM32mp157

  The other ones all use arm64 cores on chips from allwinner, amlogic,
  freescale, mediatek, qualcomm and rockchip"

* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
  ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
  ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
  ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
  ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
  arm64: dts: socionext: add missing cache properties
  riscv: dts: thead: convert isa detection to new properties
  arm64: dts: Update cache properties for socionext
  arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
  arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
  arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
  arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
  arm64: dts: ti: k3-am62p: Add nodes for more IPs
  arm64: dts: rockchip: Add Turing RK1 SoM support
  dt-bindings: arm: rockchip: Add Turing RK1
  dt-bindings: vendor-prefixes: add turing
  arm64: dts: rockchip: Add DFI to rk3588s
  arm64: dts: rockchip: Add DFI to rk356x
  arm64: dts: rockchip: Always enable DFI on rk3399
  ...

Pull VFIO updates from Alex Williamson:

 - Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
   which allows both larger device image sizes for migration, beyond the
   previous 4GB limit, and also read-ahead support for improved
   migration performance (Yishai Hadas)

 - A new bus master control interface for the CDX bus driver where there
   is no in-band mechanism to toggle device DMA as there is through
   config space on PCI devices (Nipun Gupta)

 - Add explicit alignment directives to vfio data structures to reduce
   the chance of breaking 32-bit userspace. In most cases this is
   transparent and the remaining cases where data structures are padded
   work within the existing rules for extending data structures within
   vfio (Stefan Hajnoczi)

 - Resolve a bug in the cdx bus driver noted when compiled with clang
   where missing parenthesis result in the wrong operation (Nathan
   Chancellor)

 - Resolve errors reported by smatch for a function when dealing with
   invalid inputs (Alex Williamson)

 - Add migration support to the mtty vfio/mdev sample driver for testing
   and integration purposes, allowing CI of migration without specific
   hardware requirements. Also resolve many of the short- comings of
   this driver relative to implementation of the vfio interrupt ioctl
   along the way (Alex Williamson)

* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/mtty: Enable migration support
  vfio/mtty: Overhaul mtty interrupt handling
  vfio: Fix smatch errors in vfio_combine_iova_ranges()
  vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
  vfio/mlx5: Activate the chunk mode functionality
  vfio/mlx5: Add support for READING in chunk mode
  vfio/mlx5: Add support for SAVING in chunk mode
  vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
  vfio/mlx5: Rename some stuff to match chunk mode
  vfio/mlx5: Enable querying state size which is > 4GB
  vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
  vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
  vfio: use __aligned_u64 in struct vfio_device_ioeventfd
  vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
  vfio: trivially use __aligned_u64 for ioctl structs
  vfio-cdx: add bus mastering device feature support
  vfio: add bus master feature to device feature ioctl
  cdx: add support for bus mastering

Pull dma-mapping updates from Christoph Hellwig:

 - get rid of the fake support for coherent DMA allocation on coldfire
   with caches (Christoph Hellwig)

 - add a few Kconfig dependencies so that Kconfig catches the use of
   invalid configurations (Christoph Hellwig)

 - fix a type in dma-debug output (Chuck Lever)

 - rewrite a comment in swiotlb (Sean Christopherson)

* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: Fix a typo in a debugging eye-catcher
  swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
  m68k: remove unused includes from dma.c
  m68k: don't provide arch_dma_alloc for nommu/coldfire
  net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
  m68k: use the coherent DMA code for coldfire without data cache
  dma-direct: warn when coherent allocations aren't supported
  dma-direct: simplify the use atomic pool logic in dma_direct_alloc
  dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
  dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL

Pull pmdomain updates from Ulf Hansson:

 - Move Kconfig files into the pmdomain subsystem

 - Drop use of genpd's redundant ->opp_to_performance_state() callback

 - amlogic:
    - Add support for the T7 power-domains controller
    - Fix mask for the second NNA mem power-domain

 - bcm: Fixup ASB register read and comparison for bcm2835-power

 - imx: Fix device link problem for consumers of the pgc power-domain

 - mediatek: Add support for the MT8365 power domains

 - qcom:
    - Add support for the rpmhpds for SC8380XP power-domains
    - Add support for the rpmhpds for SM8650 power-domains
    - Add support for the rpmhpd clocks for SM7150
    - Add support for the rpmpds for MSM8917 (families) power-domains

 - starfive: Add support for the JH7110 AON PMU

* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
  pmdomain: amlogic: Fix mask for the second NNA mem PD domain
  pmdomain: qcom: rpmhpd: Add SC8380XP power domains
  pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
  dt-bindings: power: rpmpd: Add SC8380XP support
  dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
  dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
  pmdomain: imx: Make imx pgc power domain also set the fwnode
  pmdomain: qcom: rpmpd: Add QM215 power domains
  pmdomain: qcom: rpmpd: Add MSM8917 power domains
  dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
  pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
  pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
  pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
  pmdomain: Use device_get_match_data()
  pmdomain: ti: add missing of_node_put
  pmdomain: mediatek: Add support for MT8365
  pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
  pmdomain: mediatek: Add support for WAY_EN operations
  pmdomain: mediatek: Unify configuration for infracfg and smi
  ...

Pull MMC updates from Ulf Hansson:
" MMC core:
   - Enable host caps to be modified via debugfs to test speed-modes
   - Improve random I/O writes for 4k buffers for hsq enabled hosts

  MMC host:
   - atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer
   - dw_mmc-starfive: Re-work tuning support
   - meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR
   - mmci: Use peripheral flow control for the STM32 variant
   - renesas,sdhi: Add support for the RZ/G3S variant
   - sdhci-esdhc-imx: Optimize the manual tuning logic
   - sdhci-msm: Add support for the SM8650 variant
   - sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant
   - sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2"

* tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
  dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller
  mmc: meson-gx: Remove setting of CMD_CFG_ERROR
  MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS
  mmc: jz4740: Use device_get_match_data()
  mmc: sdhci-npcm: Add NPCM SDHCI driver
  dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller
  mmc: sdhci-pltfm: Make driver OF independent
  mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init()
  mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed()
  mmc: debugfs: Allow host caps to be modified
  mmc: core: Always reselect card type
  mmc: mmci: use peripheral flow control for STM32
  mmc: vub300: replace deprecated strncpy with strscpy
  memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by
  mmc: starfive: Change tuning implementation
  dt-bindings: mmc: starfive: Remove properties from required
  mmc: hsq: Improve random I/O write performance for 4k buffers
  mmc: core: Allow dynamical updates of the number of requests for hsq
  mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
  dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support
  ...

Merge tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Update DM core to directly call the map function for both the linear
   and stripe targets; which are provided by DM core

 - Various updates to use new safer string functions

 - Update DM core to respect REQ_NOWAIT flag in normal bios so that
   memory allocations are always attempted with GFP_NOWAIT

 - Add Mikulas Patocka to MAINTAINERS as a DM maintainer!

 - Improve DM delay target's handling of short delays (< 50ms) by using
   a kthread to check expiration of IOs rather than timers and a wq

 - Update the DM error target so that it works with zoned storage. This
   helps xfstests to provide proper IO error handling coverage when
   testing a filesystem with native zoned storage support

 - Update both DM crypt and integrity targets to improve performance by
   using crypto_shash_digest() rather than init+update+final sequence

 - Fix DM crypt target by backfilling missing memory allocation
   accounting for compound pages

* tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: account large pages in cc->n_allocated_pages
  dm integrity: use crypto_shash_digest() in sb_mac()
  dm crypt: use crypto_shash_digest() in crypt_iv_tcw_whitening()
  dm error: Add support for zoned block devices
  dm delay: for short delays, use kthread instead of timers and wq
  MAINTAINERS: add Mikulas Patocka as a DM maintainer
  dm: respect REQ_NOWAIT flag in normal bios issued to DM
  dm: enhance alloc_multiple_bios() to be more versatile
  dm: make __send_duplicate_bios return unsigned int
  dm log userspace: replace deprecated strncpy with strscpy
  dm ioctl: replace deprecated strncpy with strscpy_pad
  dm crypt: replace open-coded kmemdup_nul
  dm cache metadata: replace deprecated strncpy with strscpy
  dm: shortcut the calls to linear_map and stripe_map

Pull ATA updates from Damien Le Moal:

 - Modify the AHCI driver to print the link power management policy used
   on scan, to help with debugging issues (Niklas)

 - Add support for the ASM2116 series adapters to the AHCI driver
   (Szuying)

 - Prepare libata for the coming gcc and Clang __counted_by attribute
   (Kees)

 - Following the recent estensive fixing of libata suspend/resume
   handling, several patches further cleanup and improve disk power
   state management (me)

 - Reduce the verbosity of some error messages for non-fatal temporary
   errors, e.g. slow response to device reset when scanning a port, and
   warning messages that are in fact normal, e.g. disabling a device on
   suspend or when removing it (me)

 - Cleanup DMA helper functions (me)

 - Fix sata_mv drive handling of potential errors durring probe (Ma)

 - Cleanup the xgene and imx drivers using the functions
   of_device_get_match_data() and device_get_match_data() (Rob)

 - Improve the tegra driver device tree (Rob)

* tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits)
  dt-bindings: ata: tegra: Disallow undefined properties
  ata: libata-core: Improve ata_dev_power_set_active()
  ata: libata-eh: Spinup disk on resume after revalidation
  ata: imx: Use device_get_match_data()
  ata: xgene: Use of_device_get_match_data()
  ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  ata: libata: Cleanup inline DMA helper functions
  ata: libata-eh: Reduce "disable device" message verbosity
  ata: libata-eh: Improve reset error messages
  ata: libata-sata: Improve ata_sas_slave_configure()
  ata: libata-core: Do not resume runtime suspended ports
  ata: libata-core: Do not poweroff runtime suspended ports
  ata: libata-core: Remove ata_port_resume_async()
  ata: libata-core: Remove ata_port_suspend_async()
  ata: libata-core: Detach a port devices on shutdown
  ata: libata-core: Synchronize ata_port_detach() with hotplug
  ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  scsi: Remove scsi device no_start_on_resume flag
  ata: libata: Annotate struct ata_cpr_log with __counted_by
  ...

Pull block updates from Jens Axboe:

 - Improvements to the queue_rqs() support, and adding null_blk support
   for that as well (Chengming)

 - Series improving badblocks support (Coly)

 - Key store support for sed-opal (Greg)

 - IBM partition string handling improvements (Jan)

 - Make number of ublk devices supported configurable (Mike)

 - Cancelation improvements for ublk (Ming)

 - MD pull requests via Song:
     - Handle timeout in md-cluster, by Denis Plotnikov
     - Cleanup pers->prepare_suspend, by Yu Kuai
     - Rewrite mddev_suspend(), by Yu Kuai
     - Simplify md_seq_ops, by Yu Kuai
     - Reduce unnecessary locking array_state_store(), by Mariusz
       Tkaczyk
     - Make rdev add/remove independent from daemon thread, by Yu Kuai
     - Refactor code around quiesce() and mddev_suspend(), by Yu Kuai

 - NVMe pull request via Keith:
     - nvme-auth updates (Mark)
     - nvme-tcp tls (Hannes)
     - nvme-fc annotaions (Kees)

 - Misc cleanups and improvements (Jiapeng, Joel)

* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
  block: ublk_drv: Remove unused function
  md: cleanup pers->prepare_suspend()
  nvme-auth: allow mixing of secret and hash lengths
  nvme-auth: use transformed key size to create resp
  nvme-auth: alloc nvme_dhchap_key as single buffer
  nvmet-tcp: use 'spin_lock_bh' for state_lock()
  powerpc/pseries: PLPKS SED Opal keystore support
  block: sed-opal: keystore access for SED Opal keys
  block:sed-opal: SED Opal keystore
  ublk: simplify aborting request
  ublk: replace monitor with cancelable uring_cmd
  ublk: quiesce request queue when aborting queue
  ublk: rename mm_lock as lock
  ublk: move ublk_cancel_dev() out of ub->mutex
  ublk: make sure io cmd handled in submitter task context
  ublk: don't get ublk device reference in ublk_abort_queue()
  ublk: Make ublks_max configurable
  ublk: Limit dev_id/ub_number values
  md-cluster: check for timeout while a new disk adding
  nvme: rework NVME_AUTH Kconfig selection
  ...

Pull io_uring futex support from Jens Axboe:
 "This adds support for using futexes through io_uring - first futex
  wake and wait, and then the vectored variant of waiting, futex waitv.

  For both wait/wake/waitv, we support the bitset variant, as the
  'normal' variants can be easily implemented on top of that.

  PI and requeue are not supported through io_uring, just the above
  mentioned parts. This may change in the future, but in the spirit of
  keeping this small (and based on what people have been asking for),
  this is what we currently have.

  Wake support is pretty straight forward, most of the thought has gone
  into the wait side to avoid needing to offload wait operations to a
  blocking context. Instead, we rely on the usual callbacks to retry and
  post a completion event, when appropriate.

  As far as I can recall, the first request for futex support with
  io_uring came from Andres Freund, working on postgres. His aio rework
  of postgres was one of the early adopters of io_uring, and futex
  support was a natural extension for that. This is relevant from both a
  usability point of view, as well as for effiency and performance. In
  Andres's words, for the former:

     Futex wait support in io_uring makes it a lot easier to avoid
     deadlocks in concurrent programs that have their own buffer pool:
     Obviously pages in the application buffer pool have to be locked
     during IO. If the initiator of IO A needs to wait for a held lock
     B, the holder of lock B might wait for the IO A to complete. The
     ability to wait for a lock and IO completions at the same time
     provides an efficient way to avoid such deadlocks

  and in terms of effiency, even without unlocking the full potential
  yet, Andres says:

     Futex wake support in io_uring is useful because it allows for more
     efficient directed wakeups. For some "locks" postgres has queues
     implemented in userspace, with wakeup logic that cannot easily be
     implemented with FUTEX_WAKE_BITSET on a single "futex word"
     (imagine waiting for journal flushes to have completed up to a
     certain point).

     Thus a "lock release" sometimes need to wake up many processes in a
     row. A quick-and-dirty conversion to doing these wakeups via
     io_uring lead to a 3% throughput increase, with 12% fewer context
     switches, albeit in a fairly extreme workload"

* tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux:
  io_uring: add support for vectored futex waits
  futex: make the vectored futex operations available
  futex: make futex_parse_waitv() available as a helper
  futex: add wake_data to struct futex_q
  io_uring: add support for futex wake and wait
  futex: abstract out a __futex_wake_mark() helper
  futex: factor out the futex wake handling
  futex: move FUTEX2_VALID_MASK to futex.h

Pull io_uring {get,set}sockopt support from Jens Axboe:
 "This adds support for using getsockopt and setsockopt via io_uring.

  The main use cases for this is to enable use of direct descriptors,
  rather than first instantiating a normal file descriptor, doing the
  option tweaking needed, then turning it into a direct descriptor. With
  this support, we can avoid needing a regular file descriptor
  completely.

  The net and bpf bits have been signed off on their side"

* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
  selftests/bpf/sockopt: Add io_uring support
  io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
  io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
  io_uring/cmd: return -EOPNOTSUPP if net is disabled
  selftests/net: Extract uring helpers to be reusable
  tools headers: Grab copy of io_uring.h
  io_uring/cmd: Pass compat mode in issue_flags
  net/socket: Break down __sys_getsockopt
  net/socket: Break down __sys_setsockopt
  bpf: Add sockptr support for setsockopt
  bpf: Add sockptr support for getsockopt

Pull io_uring updates from Jens Axboe:
 "This contains the core io_uring updates, of which there are not many,
  and adds support for using WAITID through io_uring and hence not
  needing to block on these kinds of events.

  Outside of that, tweaks to the legacy provided buffer handling and
  some cleanups related to cancelations for uring_cmd support"

* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
  io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
  io_uring/kbuf: Use slab for struct io_buffer objects
  io_uring/kbuf: Allow the full buffer id space for provided buffers
  io_uring/kbuf: Fix check of BID wrapping in provided buffers
  io_uring/rsrc: cleanup io_pin_pages()
  io_uring: cancelable uring_cmd
  io_uring: retain top 8bits of uring_cmd flags for kernel internal use
  io_uring: add IORING_OP_WAITID support
  exit: add internal include file with helpers
  exit: add kernel_waitid_prepare() helper
  exit: move core of do_wait() into helper
  exit: abstract out should_wake helper for child_wait_callback()
  io_uring/rw: add support for IORING_OP_READ_MULTISHOT
  io_uring/rw: mark readv/writev as vectored in the opcode definition
  io_uring/rw: split io_read() into a helper

Pull xen updates from Juergen Gross:

 - two small cleanup patches

 - a fix for PCI passthrough under Xen

 - a four patch series speeding up virtio under Xen with user space
   backends

* tag 'for-linus-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-pciback: Consider INTx disabled when MSI/MSI-X is enabled
  xen: privcmd: Add support for ioeventfd
  xen: evtchn: Allow shared registration of IRQ handers
  xen: irqfd: Use _IOW instead of the internal _IOC() macro
  xen: Make struct privcmd_irqfd's layout architecture independent
  xen/xenbus: Add __counted_by for struct read_buffer and use struct_size()
  xenbus: fix error exit in xenbus_init()

Pull x86 TDX updates from Dave Hansen:
 "The majority of this is a rework of the assembly and C wrappers that
  are used to talk to the TDX module and VMM. This is a nice cleanup in
  general but is also clearing the way for using this code when Linux is
  the TDX VMM.

  There are also some tidbits to make TDX guests play nicer with Hyper-V
  and to take advantage the hardware TSC.

  Summary:

   - Refactor and clean up TDX hypercall/module call infrastructure

   - Handle retrying/resuming page conversion hypercalls

   - Make sure to use the (shockingly) reliable TSC in TDX guests"

[ TLA reminder: TDX is "Trust Domain Extensions", Intel's guest VM
  confidentiality technology ]

* tag 'x86_tdx_for_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Mark TSC reliable
  x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed()
  x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP
  x86/virt/tdx: Wire up basic SEAMCALL functions
  x86/tdx: Remove 'struct tdx_hypercall_args'
  x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm
  x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL
  x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs
  x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure
  x86/tdx: Rename __tdx_module_call() to __tdcall()
  x86/tdx: Make macros of TDCALLs consistent with the spec
  x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid
  x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro
  x86/tdx: Retry partially-completed page conversion hypercalls

Pull parisc updates from Helge Deller:
 "Usual fixes and updates:

   - Add up to 12 nops after TLB inserts for PA8x00 CPUs as the
     specification requires (Dave Anglin)

   - Simplify the parisc smp_prepare_boot_cpu() code (Russell King)

   - Use 64-bit little-endian values in SBA IOMMU PDIR table for AGP

  Since there is upcoming support for booting a 64-bit kernel on QEMU,
  some corner cases were fixed and improvements added:

   - Fix 64-bit kernel crash in STI (graphics console) font setup code
     which miscalculated the font start address as it gets signed vs
     unsigned offsets wrong

   - Support building an uncompressed Linux kernel

   - Add support for soft power-off in qemu"

* tag 'parisc-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
  parisc: Show default CPU PSW.W setting as reported by PDC
  parisc/pdc: Add width field to struct pdc_model
  parisc: Add nop instructions after TLB inserts
  parisc: simplify smp_prepare_boot_cpu()
  parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table
  parisc/firmware: Use PDC constants for narrow/wide firmware
  parisc: Move parisc_narrow_firmware variable to header file
  parisc/power: Trivial whitespace cleanups and license update
  parisc/power: Add power soft-off when running on qemu
  parisc: Allow building uncompressed Linux kernel
  parisc: Add some missing PDC functions and constants
  parisc: sba-iommu: Fix comment when calculating IOC number

Pull m68k updates from Geert Uytterhoeven:

 - misc aesthetical improvements for the floating point emulator

 - remove the last user of strlcpy()

 - use kernel's generic libgcc functions

 - misc fixes for W=1 builds

 - misc indentation fixes

 - misc fixes and improvements

 - defconfig updates

* tag 'm68k-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (72 commits)
  m68k: lib: Include <linux/libgcc.h> for __muldi3()
  m68k: fpsp040: Fix indentation by 5 spaces
  m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h>
  m68k: kernel: Fix indentation by 7 spaces in traps.c
  m68k: sun3: Fix indentation by 5 or 7 spaces
  m68k: Fix indentation by 7 spaces in <asm/io_mm.h>
  m68k: defconfig: Update virt_defconfig for v6.6-rc3
  m68k: defconfig: Update defconfigs for v6.6-rc1
  m68k: io: Mark mmio read addresses as const
  m68k: Replace GPL 2.0+ README.legal boilerplate with SPDX
  m68k: sun3: Change led_pattern[] to unsigned char
  m68k: Add missing types to asm/irq.h
  m68k: sun3/3x: Add and use "sun3.h"
  m68k: sun3x: Make dvma_print() static
  m68k: sun3x: Make sun3x_halt() static
  m68k: sun3x: Do not mark dvma_map_iommu() inline
  m68k: sun3x: Fix signature of sun3_leds()
  m68k: sun3: Make sun3_platform_init() static
  m68k: sun3: Make print_pte() static
  m68k: sun3: Annotate prom_printf() with __printf()
  ...

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct module_notes_attrs.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Delete duplicated word in comment.
Signed-off-by: Zhu Mao <zhumao001@208suo.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

The return value of is_valid_name() is true or false,
so change its type to reflect that.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

The return value of is_mapping_symbol() is true or false,
so change its type to reflect that.
Suggested-by: Xi Zhang <zhangxi@kylinos.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Use a similar approach as commit a419beac ("module/decompress: use
vmalloc() for zstd decompression workspace") and replace kmalloc() with
vmalloc() also for the gzip module decompression workspace.

In this case the workspace is represented by struct inflate_workspace
that can be fairly large for kmalloc() and it can potentially lead to
allocation errors on certain systems:

$ pahole inflate_workspace
struct inflate_workspace {
	struct inflate_state       inflate_state;        /*     0  9544 */
	/* --- cacheline 149 boundary (9536 bytes) was 8 bytes ago --- */
	unsigned char              working_window[32768]; /*  9544 32768 */

	/* size: 42312, cachelines: 662, members: 2 */
	/* last cacheline: 8 bytes */
};

Considering that there is no need to use continuous physical memory,
simply switch to vmalloc() to provide a more reliable in-kernel module
decompression.

Fixes: b1ae6dc4 ("module: add in-kernel support for decompressing")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Use glob include/linux/module*.h to capture all module changes.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Commit 9bbb9e5a ("param: use ops in struct kernel_param, rather than
get and set fns directly") added the comment that module_param_call()
was deprecated, during a large scale refactoring to bring sanity to type
casting back then. In 2017 following more cleanups, it became useful
again as it wraps a common pattern of creating an ops struct for a
given get/set pair:

  b2f270e8 ("module: Prepare to convert all module_param_call() prototypes")
  ece1996a ("module: Do not paper over type mismatches in module_param_call()")

        static const struct kernel_param_ops __param_ops_##name = \
                { .flags = 0, .set = _set, .get = _get }; \
        __module_param_call(MODULE_PARAM_PREFIX, \
                            name, &__param_ops_##name, arg, perm, -1, 0)

        __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, -1, 0)

Many users of module_param_cb() appear to be almost universally
open-coding the same thing that module_param_call() does now. Don't
discourage[1] people from using module_param_call(): clarify the comment
to show that module_param_cb() is useful if you repeatedly use the same
pair of get/set functions.

[1] https://lore.kernel.org/lkml/202308301546.5C789E5EC@keescook/

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Nick Desaulniers <ndesaulniers@gooogle.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: linux-modules@vger.kernel.org
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull arm64 updates from Catalin Marinas:
 "No major architecture features this time around, just some new HWCAP
  definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.

  The bulk of the changes is reworking of the CPU capability checking
  code (cpus_have_cap() etc).

   - Major refactoring of the CPU capability detection logic resulting
     in the removal of the cpus_have_const_cap() function and migrating
     the code to "alternative" branches where possible

   - Backtrace/kgdb: use IPIs and pseudo-NMI

   - Perf and PMU:

      - Add support for Ampere SoC PMUs

      - Multi-DTC improvements for larger CMN configurations with
        multiple Debug & Trace Controllers

      - Rework the Arm CoreSight PMU driver to allow separate
        registration of vendor backend modules

      - Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
        driver; use device_get_match_data() in the xgene driver; fix
        NULL pointer dereference in the hisi driver caused by calling
        cpuhp_state_remove_instance(); use-after-free in the hisi driver

   - HWCAP updates:

      - FEAT_SVE_B16B16 (BFloat16)

      - FEAT_LRCPC3 (release consistency model)

      - FEAT_LSE128 (128-bit atomic instructions)

   - SVE: remove a couple of pseudo registers from the cpufeature code.
     There is logic in place already to detect mismatched SVE features

   - Miscellaneous:

      - Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
        bouncing is needed. The buffer is still required for small
        kmalloc() buffers

      - Fix module PLT counting with !RANDOMIZE_BASE

      - Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
        synchronisation code out of the set_ptes() loop

      - More compact cpufeature displaying enabled cores

      - Kselftest updates for the new CPU features"

 * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
  arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
  arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
  arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
  perf: hisi: Fix use-after-free when register pmu fails
  drivers/perf: hisi_pcie: Initialize event->cpu only on success
  drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
  arm64: cpufeature: Change DBM to display enabled cores
  arm64: cpufeature: Display the set of cores with a feature
  perf/arm-cmn: Enable per-DTC counter allocation
  perf/arm-cmn: Rework DTC counters (again)
  perf/arm-cmn: Fix DTC domain detection
  drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
  drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
  drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
  clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
  arm64: Remove system_uses_lse_atomics()
  arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
  drivers/perf: xgene: Use device_get_match_data()
  perf/amlogic: add missing MODULE_DEVICE_TABLE
  arm64/mm: Hoist synchronization out of set_ptes() loop
  ...

Setting softlockup_panic from do_sysctl_args() causes it to take effect
later in boot.  The lockup detector is enabled before SMP is brought
online, but do_sysctl_args runs afterwards.  If a user wants to set
softlockup_panic on boot and have it trigger should a softlockup occur
during onlining of the non-boot processors, they could do this prior to
commit f117955a ("kernel/watchdog.c: convert {soft/hard}lockup boot
parameters to sysctl aliases").  However, after this commit the value
of softlockup_panic is set too late to be of help for this type of
problem.  Restore the prior behavior.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: f117955a ("kernel/watchdog.c: convert {soft/hard}lockup boot parameters to sysctl aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>