- 16 Jan, 2019 40 commits
-
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 599b8c09 ] This is the new gamepad that ships with the Xbox One S which includes Bluetooth functionality. Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit f712a5a0 ] When the USB wireless adapter is suspended, the controllers lose their connection. This causes them to start flashing their LED rings and searching for the wireless adapter again, wasting the controller's battery power. Instead, we will tell the controllers to power down when we suspend. This mirrors the behavior of the controllers when connected to the console itself and how the official Xbox One wireless adapter behaves on Windows. Signed-off-by:
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 540c2608 ] Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by:
-
Pavel Rojtberg authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 6f49a398 ] added the according id and incresed XPAD_PKT_LEN to 64 as the elite controller sends at least 33 byte messages [1]. Verified to be working by [2]. [1]: https://franticrain.github.io/sniffs/XboxOneSniff.html [2]: https://github.com/paroj/xpad/issues/23Signed-off-by:
Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by:
Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by:
-
Pavel Rojtberg authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 6538c3b2 ] Signed-off-by:
Thomas Debesse <dev@illwieckz.net> Signed-off-by:
aronschatz <aronschatz@aselabs.com> Signed-off-by:
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 1ff5fa3c ] After initially connecting a wired Xbox 360 controller or sending it a command to change LEDs, a status/response packet is interpreted as controller input. This causes the state of buttons represented in byte 2 of the controller data packet to be incorrect until the next valid input packet. Wireless Xbox 360 controllers are not affected. Writing a new value to the LED device while holding the Start button and running jstest is sufficient to reproduce this bug. An event will come through with the Start button released. Xboxdrv also won't attempt to read controller input from a packet where byte 0 is non-zero. It also checks that byte 1 is 0x14, but that value differs between wired and wireless controllers and this code is shared by both. I think just checking byte 0 is enough to eliminate unwanted packets. The following are some examples of 3-byte status packets I saw: 01 03 02 02 03 00 03 03 03 08 03 00 Signed-off-by:
-
Silvan Jegen authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit d63b0f0c ] This adds the VID/PID combination for the Xbox One version of the Mad Catz FightStick TE 2. The functionality that this provides is about on par with what the Windows drivers for the stick manage to deliver. What works: - Digital stick - 6 main buttons - Xbox button - The two buttons on the back - The locking buttons (preventing accidental Xbox button press) What doesn't work: - Two of the main buttons (don't work on Windows either) - The "Haptic" button setting does not have an effect (not sure if it works on Windows) I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing there was no practical difference with or without. The FightStick does not have triggers though so adding it makes sense. Signed-off-by:
Silvan Jegen <s.jegen@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit a6ed4a18 ] There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: cae705ba ("Input: xpad - re-send LED command on present event") Signed-off-by:
-
Pavel Rojtberg authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 95162dc8 ] Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19Signed-off-by:
-
Dmitry Torokhov authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit d9be398a ] When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by:
-
Pavel Rojtberg authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 4220f7db ] The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6Signed-off-by:
-
Pierre-Loup A. Griffais authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 2a6d7527 ] There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by:
-
Pierre-Loup A. Griffais authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 09c8b00a ] Handle the "a new device is present" message properly by dynamically creating the input device at this point in time. This means we now do not "preallocate" all 4 devices when a single wireless base station is seen. This requires a workqueue as we are in interrupt context when we learn about this. Also properly disconnect any devices that we are told are removed. Signed-off-by:
"Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Clement Calmels authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 93a017aa ] When powering up a wireless xbox 360 controller, some wrong joystick events are generated. It is annoying because, for example, it makes unwanted moves in Steam big picture mode's menu. When my controller is powering up, this packet is received by the driver: 00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20 ...........jh.. 00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff .. .0.@.P... According to xboxdrv userspace driver source code, this packet is only dumping a serial id and should not be interpreted as joystick events. This issue can be easily seen with jstest: $ jstest --event /dev/input/js0 This patch only adds a way to filter out this "serial" packet and as a result it removes the spurous events. Signed-off-by:
Clement Calmels <clement.calmels@free.fr> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit ebaa4b16 upstream. arvifs list is traversed within data_lock spin_lock in tasklet context to fill channel information from the corresponding vif. This means any access to arvifs list for add/del operations should also be protected with the same spin_lock to avoid the race. Fix this by performing list add/del on arvfis within the data_lock. This could fix kernel panic something like the below. LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core] PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core]) [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core]) [<c00312d4>] (tasklet_action+0x8c/0xec) [<c00309a8>] (__do_softirq+0xdc/0x208) [<c0030d6c>] (irq_exit+0x84/0xe0) [<c005db04>] (__handle_domain_irq+0x80/0xa0) [<c00085c4>] (gic_handle_irq+0x38/0x5c) [<c0009640>] (__irq_svc+0x40/0x74) (gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0) 0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769) 764 struct cfg80211_chan_def def; 765 766 lockdep_assert_held(&ar->data_lock); 767 768 list_for_each_entry(arvif, &ar->arvifs, list) { 769 if (arvif->vdev_id == vdev_id && 770 ath10k_mac_vif_chan(arvif->vif, &def) == 0) 771 return def.chan; 772 } 773 Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Greg Hackmann authored
BugLink: https://bugs.launchpad.net/bugs/1810967 (commit 1a381d4a upstream) Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit b3681dd5 ] error_entry and error_exit communicate the user vs. kernel status of the frame using %ebx. This is unnecessary -- the information is in regs->cs. Just use regs->cs. This makes error_entry simpler and makes error_exit more robust. It also fixes a nasty bug. Before all the Spectre nonsense, the xen_failsafe_callback entry point returned like this: ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS ENCODE_FRAME_POINTER jmp error_exit And it did not go through error_entry. This was bogus: RBX contained garbage, and error_exit expected a flag in RBX. Fortunately, it generally contained *nonzero* garbage, so the correct code path was used. As part of the Spectre fixes, code was added to clear RBX to mitigate certain speculation attacks. Now, depending on kernel configuration, RBX got zeroed and, when running some Wine workloads, the kernel crashes. This was introduced by: commit 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") With this patch applied, RBX is no longer needed as a flag, and the problem goes away. I suspect that malicious userspace could use this bug to crash the kernel even without the offending patch applied, though. [ Historical note: I wrote this patch as a cleanup before I was aware of the bug it fixed. ] [ Note to stable maintainers: this should probably get applied to all kernels. If you're nervous about that, a more conservative fix to add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should also fix the problem. ] Reported-and-tested-by:
M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Fixes: 3ac6d8c7 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nicolas Iooss authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 75ca5b22 ] As EBS does not mean anything reasonable in the context it is used, it seems like a misspelling for EBX. Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit d397dbe6 ] Use the new of_get_compatible_child() helper to lookup the mdio child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the node of the device being probed). Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 5bf59773 ] Use the new of_get_compatible_child() helper to lookup the nfc child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the parent node). Fixes: e097dc62 ("NFC: nfcmrvl: add UART driver") Fixes: d8e018c0 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Vincent Cuissard <cuissard@marvell.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 36156f92 ] Add of_get_compatible_child() helper that can be used to lookup compatible child nodes. Several drivers currently use of_find_compatible_node() to lookup child nodes while failing to notice that the of_find_ functions search the entire tree depth-first (from a given start node) and therefore can match unrelated nodes. The fact that these functions also drop a reference to the node they start searching from (e.g. the parent node) is typically also overlooked, something which can lead to use-after-free bugs. Signed-off-by:
-
Yufen Yu authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 1a413646 ] Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Satheesh Rajendran authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 437ccdc8 ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Prarit Bhargava authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit c2b94c72 ] gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit e3d5e573 ] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Anson Huang authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 6ef28a04 ] Add return value check for voltage scale when ARM clock rate change fail. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Scott Wood authored
BugLink: https://bugs.launchpad.net/bugs/1810967 [ Upstream commit 28c5bcf7 ] TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by <trace/define_trace.h>, so like that #include, they should be outside #ifdef protection. They also need to be #undefed before defining, in case multiple trace headers are included by the same C file. This became the case on book3e after commit cf4a6085 ("powerpc/mm: Add missing tracepoint for tlbie"), leading to the following build error: CC arch/powerpc/kvm/powerpc.o In file included from arch/powerpc/kvm/powerpc.c:51:0: arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined [-Werror] #define TRACE_INCLUDE_PATH . ^ In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0, from arch/powerpc/kvm/powerpc.c:48: ./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of the previous definition #define TRACE_INCLUDE_PATH asm ^ cc1: all warnings being treated as errors Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 2f31a67f upstream. USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 7da11ba5 upstream. Prior to echoing a successfully transmitted CAN frame (by calling can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling can_put_echo_skb() in the transmit function). These put and get function take an index as parameter, which is used to identify the CAN frame. A driver calling can_get_echo_skb() with a index not pointing to a skb is a BUG, so add an appropriate error message. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marc Kleine-Budde authored
can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds BugLink: https://bugs.launchpad.net/bugs/1810967 commit e7a6994d upstream. If the "struct can_priv::echo_skb" is accessed out of bounds would lead to a kernel crash. Better print a sensible warning message instead and try to recover. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 200f5c49 upstream. This patch replaces the use of "struct can_frame::can_dlc" by "struct canfd_frame::len" to access the frame's length. As it is ensured that both structures have a compatible memory layout for this member this is no functional change. Futher, this compatibility is documented in a comment. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Kleine-Budde authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit a4310fa2 upstream. This patch factors out all non sending parts of can_get_echo_skb() into a seperate function __can_get_echo_skb(), so that it can be re-used in an upcoming patch. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Y.C. Chen authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 7989b9ee upstream. Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Y.C. Chen authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 1a37bd82 upstream. The value of pitches is not correct while calling mode_set. The issue we found so far on following system: - Debian8 with XFCE Desktop - Ubuntu with KDE Desktop - SUSE15 with KDE Desktop Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 604d415e upstream. syzkaller triggered a use-after-free [1], caused by a combination of skb_get() in llc_conn_state_process() and usage of sk_eat_skb() sk_eat_skb() is assuming the skb about to be freed is only used by the current thread. TCP/DCCP stacks enforce this because current thread holds the socket lock. llc_conn_state_process() wants to make sure skb does not disappear, and holds a reference on the skb it manipulates. But as soon as this skb is added to socket receive queue, another thread can consume it. This means that llc must use regular skb_unlink() and kfree_skb() so that both producer and consumer can safely work on the same skb. [1] BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline] BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline] BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655 Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18 CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] refcount_read include/linux/refcount.h:43 [inline] skb_unref include/linux/skbuff.h:967 [inline] kfree_skb+0xb7/0x580 net/core/skbuff.c:655 llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224 llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297 llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438 llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 run_ksoftirqd+0x94/0x100 kernel/softirq.c:653 smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 Allocated by task 18: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644 __alloc_skb+0x119/0x770 net/core/skbuff.c:193 alloc_skb include/linux/skbuff.h:995 [inline] llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54 llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline] llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111 llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 Freed by task 16383: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x83/0x290 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642 sk_eat_skb include/net/sock.h:2366 [inline] llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:801 ___sys_recvmsg+0x2b6/0x680 net/socket.c:2278 __sys_recvmmsg+0x303/0xb90 net/socket.c:2390 do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466 __do_sys_recvmmsg net/socket.c:2484 [inline] __se_sys_recvmmsg net/socket.c:2480 [inline] __x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801d1f6fac0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 228 bytes inside of 232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8) The buggy address belongs to the page: page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680 raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrew Price authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 4c62bd9c upstream. When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points to the same address. Move the assignment after that error check so that s_fs_info can only point to a valid sdp or NULL, which is checked for later in the error path, in gfs2_kill_super(). Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit df132eff upstream. If a transport is removed by asconf but there still are some chunks with this transport queuing on out_chunk_list, later an use-after-free issue will be caused when accessing this transport from these chunks in sctp_outq_flush(). This is an old bug, we fix it by clearing the transport of these chunks in out_chunk_list when removing a transport in sctp_assoc_rm_peer(). Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 9f2df09a upstream. syzbot is reporting too large memory allocation at bfs_fill_super() [1]. Since file system image is corrupted such that bfs_sb->s_start == 0, bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and printf(). [1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96 Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com> Reviewed-by:
-
Dominique Martinet authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 81c99089 upstream. p9stat_read will call p9stat_free on error, we should only free the struct content on success. There also is no need to "p9stat_init" st as the read function will zero the whole struct for us anyway, so clean up the code a bit while we are here. Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.orgSigned-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com Signed-off-by:
-
Emmanuel Grumbach authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit ec484d03 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef925 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
