- 29 Oct, 2019 40 commits
-
-
David Hildenbrand authored
commit f231fe42 upstream. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Let's make sure that we only consider online memory (managed by the buddy) that has initialized memmaps. ZONE_DEVICE is not applicable. page_zone() will call page_to_nid(), which will trigger VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) with CONFIG_PAGE_POISONING and CONFIG_DEBUG_VM_PGFLAGS when called on uninitialized memmaps. This can be the case when an offline memory block (e.g., never onlined) is spanned by a zone. Note: As explained by Michal in [1], alloc_contig_range() will verify the range. So it boils down to the wrong access in this function. [1] http://lkml.kernel.org/r/20180423000943.GO17484@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20191015120717.4858-1-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e8] Signed-off-by:
David Hildenbrand <david@redhat.com> Reported-by:
Michal Hocko <mhocko@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qian Cai authored
commit a26ee565 upstream. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. For example, when not onlining a memory block that is spanned by a zone and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and CONFIG_PAGE_POISONING, we can trigger a kernel BUG: :/# echo 1 > /sys/devices/system/memory/memory40/online :/# echo 1 > /sys/devices/system/memory/memory42/online :/# cat /proc/pagetypeinfo > test.file page:fffff2c585200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) There is not page extension available. ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1107! invalid opcode: 0000 [#1] SMP NOPTI Please note that this change does not affect ZONE_DEVICE, because pagetypeinfo_showmixedcount_print() is called from mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and ZONE_DEVICE is never populated (zone->present_pages always 0). [david@redhat.com: move check to outer loop, add comment, rephrase description] Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e8Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Qian Cai <cai@lca.pw> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by:
-
Qian Cai authored
commit e4f8e513 upstream. A long time ago we fixed a similar deadlock in show_slab_objects() [1]. However, it is apparently due to the commits like 01fb58bc ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path") and 03afc0e2 ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by just reading files in /sys/kernel/slab which will generate a lockdep splat below. Since the "mem_hotplug_lock" here is only to obtain a stable online node mask while racing with NUMA node hotplug, in the worst case, the results may me miscalculated while doing NUMA node hotplug, but they shall be corrected by later reads of the same files. WARNING: possible circular locking dependency detected ------------------------------------------------------ cat/5224 is trying to acquire lock: ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at: show_slab_objects+0x94/0x3a8 but task is already holding lock: b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (kn->count#45){++++}: lock_acquire+0x31c/0x360 __kernfs_remove+0x290/0x490 kernfs_remove+0x30/0x44 sysfs_remove_dir+0x70/0x88 kobject_del+0x50/0xb0 sysfs_slab_unlink+0x2c/0x38 shutdown_cache+0xa0/0xf0 kmemcg_cache_shutdown_fn+0x1c/0x34 kmemcg_workfn+0x44/0x64 process_one_work+0x4f4/0x950 worker_thread+0x390/0x4bc kthread+0x1cc/0x1e8 ret_from_fork+0x10/0x18 -> #1 (slab_mutex){+.+.}: lock_acquire+0x31c/0x360 __mutex_lock_common+0x16c/0xf78 mutex_lock_nested+0x40/0x50 memcg_create_kmem_cache+0x38/0x16c memcg_kmem_cache_create_func+0x3c/0x70 process_one_work+0x4f4/0x950 worker_thread+0x390/0x4bc kthread+0x1cc/0x1e8 ret_from_fork+0x10/0x18 -> #0 (mem_hotplug_lock.rw_sem){++++}: validate_chain+0xd10/0x2bcc __lock_acquire+0x7f4/0xb8c lock_acquire+0x31c/0x360 get_online_mems+0x54/0x150 show_slab_objects+0x94/0x3a8 total_objects_show+0x28/0x34 slab_attr_show+0x38/0x54 sysfs_kf_seq_show+0x198/0x2d4 kernfs_seq_show+0xa4/0xcc seq_read+0x30c/0x8a8 kernfs_fop_read+0xa8/0x314 __vfs_read+0x88/0x20c vfs_read+0xd8/0x10c ksys_read+0xb0/0x120 __arm64_sys_read+0x54/0x88 el0_svc_handler+0x170/0x240 el0_svc+0x8/0xc other info that might help us debug this: Chain exists of: mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kn->count#45); lock(slab_mutex); lock(kn->count#45); lock(mem_hotplug_lock.rw_sem); *** DEADLOCK *** 3 locks held by cat/5224: #0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8 #1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0 #2: b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0 stack backtrace: Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0xd0/0x140 print_circular_bug+0x368/0x380 check_noncircular+0x248/0x250 validate_chain+0xd10/0x2bcc __lock_acquire+0x7f4/0xb8c lock_acquire+0x31c/0x360 get_online_mems+0x54/0x150 show_slab_objects+0x94/0x3a8 total_objects_show+0x28/0x34 slab_attr_show+0x38/0x54 sysfs_kf_seq_show+0x198/0x2d4 kernfs_seq_show+0xa4/0xcc seq_read+0x30c/0x8a8 kernfs_fop_read+0xa8/0x314 __vfs_read+0x88/0x20c vfs_read+0xd8/0x10c ksys_read+0xb0/0x120 __arm64_sys_read+0x54/0x88 el0_svc_handler+0x170/0x240 el0_svc+0x8/0xc I think it is important to mention that this doesn't expose the show_slab_objects to use-after-free. There is only a single path that might really race here and that is the slab hotplug notifier callback __kmem_cache_shrink (via slab_mem_going_offline_callback) but that path doesn't really destroy kmem_cache_node data structures. [1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html [akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock] Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw Fixes: 01fb58bc ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path") Fixes: 03afc0e2 ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}") Signed-off-by:
-
David Hildenbrand authored
commit 96c804a6 upstream. We should check for pfn_to_online_page() to not access uninitialized memmaps. Reshuffle the code so we don't have to duplicate the error message. Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by:
-
Faiz Abbas authored
commit c07d0073 upstream. Add a write memory barrier to make sure that descriptors are actually written to memory, before ringing the doorbell. Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
David Hildenbrand authored
commit aad5f69b upstream. There are three places where we access uninitialized memmaps, namely: - /proc/kpagecount - /proc/kpageflags - /proc/kpagecgroup We have initialized memmaps either when the section is online or when the page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. For example, not onlining a DIMM during boot and calling /proc/kpagecount with CONFIG_PAGE_POISONING: :/# cat /proc/kpagecount > tmp.test BUG: unable to handle page fault for address: fffffffffffffffe #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114616067 P4D 114616067 PUD 114618067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 RIP: 0010:kpagecount_read+0xce/0x1e0 Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480 RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202 RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000 RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08 FS: 00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0 Call Trace: proc_reg_read+0x3c/0x60 vfs_read+0xc5/0x180 ksys_read+0x68/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe For now, let's drop support for ZONE_DEVICE from the three pseudo files in order to fix this. To distinguish offline memory (with garbage memmap) from ZONE_DEVICE memory with properly initialized memmaps, we would have to check get_dev_pagemap() and pfn_zone_device_reserved() right now. The usage of both (especially, special casing devmem) is frowned upon and needs to be reworked. The fundamental issue we have is: if (pfn_to_online_page(pfn)) { /* memmap initialized */ } else if (pfn_valid(pfn)) { /* * ??? * a) offline memory. memmap garbage. * b) devmem: memmap initialized to ZONE_DEVICE. * c) devmem: reserved for driver. memmap garbage. * (d) devmem: memmap currently initializing - garbage) */ } We'll leave the pfn_zone_device_reserved() check in stable_page_flags() in place as that function is also used from memory failure. We now no longer dump information about pages that are not in use anymore - offline. Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e8] Signed-off-by:
-
David Hildenbrand authored
commit 641fe2e9 upstream. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Right now, when trying to soft-offline a PFN that resides on a memory block that was never onlined, one gets a misleading error with CONFIG_PAGE_POISONING: :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page [ 23.097167] soft offline: 0x150000 page already poisoned But the actual result depends on the garbage in the memmap. soft_offline_page() can only work with online pages, it returns -EIO in case of ZONE_DEVICE. Make sure to only forward pages that are online (iow, managed by the buddy) and, therefore, have an initialized memmap. Add a check against pfn_to_online_page() and similarly return -EIO. Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e8] Signed-off-by:
-
Hans de Goede authored
commit 984d7a92 upstream. Bail from the pci_driver probe function instead of from the drm_driver load function. This avoid /dev/dri/card0 temporarily getting registered and then unregistered again, sending unwanted add / remove udev events to userspace. Specifically this avoids triggering the (userspace) bug fixed by this plymouth merge-request: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59 Note that despite that being a userspace bug, not sending unnecessary udev events is a good idea in general. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Thomas Hellstrom authored
commit 941f2f72 upstream. Commit 4daa4fba ("gpu: drm: ttm: Adding new return type vm_fault_t") broke TTM prefaulting. Since vmf_insert_mixed() typically always returns VM_FAULT_NOPAGE, prefaulting stops after the second PTE. Restore (almost) the original behaviour. Unfortunately we can no longer with the new vm_fault_t return type determine whether a prefaulting PTE insertion hit an already populated PTE, and terminate the insertion loop. Instead we continue with the pre-determined number of prefaults. Fixes: 4daa4fba ("gpu: drm: ttm: Adding new return type vm_fault_t") Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Kai-Heng Feng authored
commit 11bcf5f7 upstream. Another panel that needs 6BPC quirk. BugLink: https://bugs.launchpad.net/bugs/1819968 Cc: <stable@vger.kernel.org> # v4.8+ Reviewed-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Will Deacon authored
commit 4152561f upstream. Although this shouldn't occur in practice, it's a good idea to bounds check the length field of the SSID element prior to using it for things like allocations or memcpy operations. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by:
Nicolas Waisman <nico@semmle.com> Signed-off-by:
Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Will Deacon authored
commit 4ac2813c upstream. Ensure the SSID element is bounds-checked prior to invoking memcpy() with its length field, when copying to userspace. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by:
-
John Garry authored
commit 56a0b978 upstream. When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407b ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by:
John Garry <john.garry@huawei.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Junya Monden authored
commit 22e58665 upstream. Unlike other format-related DAI parameters, rdai->bit_clk_inv flag is not properly re-initialized when setting format for new stream processing. The inversion, if requested, is then applied not to default, but to a previous value, which leads to SCKP bit in SSICR register being set incorrectly. Fix this by re-setting the flag to its initial value, determined by format. Fixes: 1a7889ca ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior") Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com> Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Timo Wischer <twischer@de.adit-jv.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by:
Junya Monden <jmonden@jp.adit-jv.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Evan Green authored
commit 363c5387 upstream. rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference. There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation. There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up. Signed-off-by:
Evan Green <evgreen@chromium.org> Reviewed-by:
Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Marco Felsch authored
commit afce285b upstream. Since commit f889beaa ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This caused input device to not generate any events if "dlg,disable-key-power" is set. Fix this by unconditionally setting KEY_POWER capability, and not declaring KEY_SLEEP. Fixes: f889beaa ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
commit 6a0990ea upstream. Clearing ch->device in ch_release() is wrong because that pointer must remain valid until ch_remove() is called. This patch fixes the following crash the second time a ch device is opened: BUG: kernel NULL pointer dereference, address: 0000000000000790 RIP: 0010:scsi_device_get+0x5/0x60 Call Trace: ch_open+0x4c/0xa0 [ch] chrdev_open+0xa2/0x1c0 do_dentry_open+0x13a/0x380 path_openat+0x591/0x1470 do_filp_open+0x91/0x100 do_sys_open+0x184/0x220 do_syscall_64+0x5f/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 085e5676 ("scsi: ch: add refcounting") Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191009173536.247889-1-bvanassche@acm.orgReported-by:
Rob Turk <robtu@rtist.nl> Suggested-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Yufen Yu authored
commit 77c30128 upstream. We have a test case like block/001 in blktests, which will create a scsi device by loading scsi_debug module and then try to delete the device by sysfs interface. At the same time, it may remove the scsi_debug module. And getting a invalid paging request BUG_ON as following: [ 34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8 [ 34.629189] Oops: 0000 [#1] SMP PTI [ 34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G W 5.4.0-rc3+ #473 [ 34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0 [ 34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0 [ 34.644545] Call Trace: [ 34.644907] scsi_host_dev_release+0x6b/0x1f0 [ 34.645511] device_release+0x74/0x110 [ 34.646046] kobject_put+0x116/0x390 [ 34.646559] put_device+0x17/0x30 [ 34.647041] scsi_target_dev_release+0x2b/0x40 [ 34.647652] device_release+0x74/0x110 [ 34.648186] kobject_put+0x116/0x390 [ 34.648691] put_device+0x17/0x30 [ 34.649157] scsi_device_dev_release_usercontext+0x2e8/0x360 [ 34.649953] execute_in_process_context+0x29/0x80 [ 34.650603] scsi_device_dev_release+0x20/0x30 [ 34.651221] device_release+0x74/0x110 [ 34.651732] kobject_put+0x116/0x390 [ 34.652230] sysfs_unbreak_active_protection+0x3f/0x50 [ 34.652935] sdev_store_delete.cold.4+0x71/0x8f [ 34.653579] dev_attr_store+0x1b/0x40 [ 34.654103] sysfs_kf_write+0x3d/0x60 [ 34.654603] kernfs_fop_write+0x174/0x250 [ 34.655165] __vfs_write+0x1f/0x60 [ 34.655639] vfs_write+0xc7/0x280 [ 34.656117] ksys_write+0x6d/0x140 [ 34.656591] __x64_sys_write+0x1e/0x30 [ 34.657114] do_syscall_64+0xb1/0x400 [ 34.657627] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 34.658335] RIP: 0033:0x7f156f337130 During deleting scsi target, the scsi_debug module have been removed. Then, sdebug_driver_template belonged to the module cannot be accessd, resulting in scsi_proc_hostdir_rm() BUG_ON. To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to increase refcount of module, avoiding the module been removed. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191015130556.18061-1-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
-
Damien Le Moal authored
commit 8f8fed0c upstream. When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Oliver Neukum authored
commit 21e3d6c8 upstream. I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Steffen Maier authored
commit 2190168a upstream. On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #2.6.30+ Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Colin Ian King authored
commit 153c5d81 upstream. Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via label 'exit' and this checks if result is non-zero, however result has not been initialized and contains garbage. Fix this by replacing the goto with a return with the error code. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 0ca6d8e7 ("Staging: wlan-ng: replace switch-case statements with macro") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191014110201.9874-1-colin.king@canonical.comSigned-off-by:
-
Paul Burton authored
commit b42aa3fd upstream. build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected. Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs. Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem. Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0. This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler(). Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
commit 7a6f22d7 upstream. Fix broken read implementation, which could be used to trigger slab info leaks. The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events). Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered. Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
commit 7a759197 upstream. A recent commit addressing a runtime PM use-count regression, introduced a use-after-free by not making sure we held a reference to the struct usb_interface for the lifetime of the driver data. Fixes: 9a315358 ("USB: usblp: fix runtime PM after driver unbind") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com Signed-off-by:
-
Johan Hovold authored
commit b14a3904 upstream. If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by:
-
Johan Hovold authored
commit 6f1d1dc8 upstream. Fix races between closing a port and opening or closing another port on the same device which could lead to a failure to start or stop the shared interrupt URB. The latter could potentially cause a use-after-free or worse in the completion handler on driver unbind. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit b987b66a upstream. It seems that the right variable to use in this case is *i*, instead of *n*, otherwise there is an undefined behavior when right shifiting by more than 31 bits when multiplying n by 8; notice that *n* can take values equal or greater than 4 (4, 8, 16, ...). Also, notice that under the current conditions (bl = 3), we are skiping the handling of bytes 3, 7, 31... So, fix this by updating this logic and limit *bl* up to 4 instead of up to 3. This fix is based on function udc_stuff_fifo(). Addresses-Coverity-ID: 1454834 ("Bad bit shift operation") Fixes: 24a28e42 ("USB: gadget driver for LPC32xx") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedorSigned-off-by:
-
Lukas Wunner authored
commit 94989e31 upstream. Przemysław Kopa reports that since commit b516ea58 ("PCI: Enable NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his 2011 Samsung laptop refuses to runtime suspend, resulting in a power regression and excessive heat. Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M) of the same era, as does another Arch Linux user named "R0AR" with a more recent GeForce GTX 1050 Ti (GP107M). The commit exposes the discrete GPU's HDA controller and all four codecs on the controller do not set the CLKSTOP and EPSS bits in the Supported Power States Response. They also do not set the PS-ClkStopOk bit in the Get Power State Response. hda_codec_runtime_suspend() therefore does not call snd_hdac_codec_link_down(), which prevents each codec and the PCI device from runtime suspending. The same issue is present on some AMD discrete GPUs and we addressed it by forcing runtime PM despite the bits not being set, see commit 57cb54e5 ("ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI"). Do the same for Nvidia HDMI codecs. Fixes: b516ea58 ("PCI: Enable NVIDIA HDA controllers") Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512 Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81Reported-by:
Przemysław Kopa <prymoo@gmail.com> Reported-by:
Rivera Valdez <riveravaldez@ysinembargo.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <dan@reactivated.net> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Szabolcs Szőke authored
commit 7571b6a1 upstream. BOSS Katana amplifiers cannot be used for recording or playback if quirks are applied BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223Signed-off-by:
Szabolcs Szőke <szszoke.code@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.comSigned-off-by:
-
Daniel Drake authored
commit 8c8967a7 upstream. On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to pin 0x19, with default configuration value 0x411111f0 (indicating no physical connection). Enable this by quirking the pin. Mic jack detection was also tested and found to be working. This enables use of the headset mic on this product. Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.comSigned-off-by:
-
Kailang Yang authored
commit 83629532 upstream. Support new codec ALC711. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit b6c03e5f upstream. If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The RCU lock is insufficient to protect the radix tree iteration as a deletion from the tree can occur before we take the spinlock to tag the entry. In 4.19, this has manifested as a bug with the following trace: kernel BUG at lib/radix-tree.c:1429! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 7 PID: 6935 Comm: syz-executor.2 Not tainted 4.19.36 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:radix_tree_tag_set+0x200/0x2f0 lib/radix-tree.c:1429 Code: 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 44 24 10 e8 a3 29 7e fe 48 8b 44 24 10 48 0f ab 03 e9 d2 fe ff ff e8 90 29 7e fe <0f> 0b 48 c7 c7 e0 5a 87 84 e8 f0 e7 08 ff 4c 89 ef e8 4a ff ac fe RSP: 0018:ffff88837b13fb60 EFLAGS: 00010016 RAX: 0000000000040000 RBX: ffff8883c5515d58 RCX: ffffffff82cb2ef0 RDX: 0000000000000b72 RSI: ffffc90004cf2000 RDI: ffff8883c5515d98 RBP: ffff88837b13fb98 R08: ffffed106f627f7e R09: ffffed106f627f7e R10: 0000000000000001 R11: ffffed106f627f7d R12: 0000000000000004 R13: ffffea000d7fea80 R14: 1ffff1106f627f6f R15: 0000000000000002 FS: 00007fa1b8df2700(0000) GS:ffff8883e2fc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa1b8df1db8 CR3: 000000037d4d2001 CR4: 0000000000160ee0 Call Trace: memfd_tag_pins mm/memfd.c:51 [inline] memfd_wait_for_pins+0x2c5/0x12d0 mm/memfd.c:81 memfd_add_seals mm/memfd.c:215 [inline] memfd_fcntl+0x33d/0x4a0 mm/memfd.c:247 do_fcntl+0x589/0xeb0 fs/fcntl.c:421 __do_sys_fcntl fs/fcntl.c:463 [inline] __se_sys_fcntl fs/fcntl.c:448 [inline] __x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:448 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:293 The problem does not occur in mainline due to the XArray rewrite which changed the locking to exclude modification of the tree during iteration. At the time, nobody realised this was a bugfix. Backport the locking changes to stable. Cc: stable@vger.kernel.org Reported-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 63dfb793 ] syzbot reported a memory leak: BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64): backtrace: [...] slab_alloc mm/slab.c:3319 [inline] [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483 [...] sctp_bucket_create net/sctp/socket.c:8523 [inline] [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270 [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402 [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497 [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022 [...] sctp_setsockopt net/sctp/socket.c:4641 [inline] [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611 [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147 [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [...] __do_sys_setsockopt net/socket.c:2100 [inline] It was caused by when sending msgs without binding a port, in the path: inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set. sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind. THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port. Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Biao Huang authored
[ Upstream commit e497c20e ] disable ptp_ref_clk in suspend flow, and enable it in resume flow. Fixes: f573c0b9 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit c7a42eb4 ] We need a similar fix for ipv6 as Commit 0761680d ("net: ipv4: fix listify ip_rcv_finish in case of forwarding") does for ipv4. This issue can be reprocuded by syzbot since Commit 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs") on net-next. The call trace was: kernel BUG at include/linux/skbuff.h:2225! RIP: 0010:__skb_pull include/linux/skbuff.h:2225 [inline] RIP: 0010:skb_pull+0xea/0x110 net/core/skbuff.c:1902 Call Trace: sctp_inq_pop+0x2f1/0xd80 net/sctp/inqueue.c:202 sctp_endpoint_bh_rcv+0x184/0x8d0 net/sctp/endpointola.c:385 sctp_inq_push+0x1e4/0x280 net/sctp/inqueue.c:80 sctp_rcv+0x2807/0x3590 net/sctp/input.c:256 sctp6_rcv+0x17/0x30 net/sctp/ipv6.c:1049 ip6_protocol_deliver_rcu+0x2fe/0x1660 net/ipv6/ip6_input.c:397 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:438 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip6_input+0xe4/0x3f0 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:442 [inline] ip6_sublist_rcv_finish+0x98/0x1e0 net/ipv6/ip6_input.c:84 ip6_list_rcv_finish net/ipv6/ip6_input.c:118 [inline] ip6_sublist_rcv+0x80c/0xcf0 net/ipv6/ip6_input.c:282 ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:316 __netif_receive_skb_list_ptype net/core/dev.c:5049 [inline] __netif_receive_skb_list_core+0x5fc/0x9d0 net/core/dev.c:5097 __netif_receive_skb_list net/core/dev.c:5149 [inline] netif_receive_skb_list_internal+0x7eb/0xe60 net/core/dev.c:5244 gro_normal_list.part.0+0x1e/0xb0 net/core/dev.c:5757 gro_normal_list net/core/dev.c:5755 [inline] gro_normal_one net/core/dev.c:5769 [inline] napi_frags_finish net/core/dev.c:5782 [inline] napi_gro_frags+0xa6a/0xea0 net/core/dev.c:5855 tun_get_user+0x2e98/0x3fa0 drivers/net/tun.c:1974 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2020 Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Fixes: 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs") Reported-by: syzbot+eb349eeee854e389c36d@syzkaller.appspotmail.com Reported-by: syzbot+4a0643a653ac375612d1@syzkaller.appspotmail.com Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Cédric Le Goater authored
[ Upstream commit 11d49ce9 ] pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643 ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 61c1d33d ] Commit 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 92696286 ] phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c5 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
-
