- 02 Mar, 2022 3 commits
-
-
Suma Hegde authored
Recent Fam19h EPYC server line of processors from AMD support system management functionality via HSMP (Host System Management Port) interface. The Host System Management Port (HSMP) is an interface to provide OS-level software with access to system management functions via a set of mailbox registers. More details on the interface can be found in chapter "7 Host System Management Port (HSMP)" of the following PPR https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip This patch adds new amd_hsmp module under the drivers/platforms/x86/ which creates miscdevice with an IOCTL interface to the user space. /dev/hsmp is for running the hsmp mailbox commands. Signed-off-by:
Suma Hegde <suma.hegde@amd.com> Signed-off-by:
Naveen Krishna Chatradhi <nchatrad@amd.com> Reviewed-by:
Carlos Bilbao <carlos.bilbao@amd.com> Acked-by:
Song Liu <song@kernel.org> Reviewed-by:
Nathan Fontenot <nathan.fontenot@amd.com> Link: https://lore.kernel.org/r/20220222050501.18789-1-nchatrad@amd.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The battery on the 2nd hand Surface 3 which I recently bought appears to not have a serial number programmed in. This results in any I2C reads from the registers containing the serial number failing with an I2C NACK. This was causing mshw0011_bix() to fail causing the battery readings to not work at all. Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and continue with an empty serial number to fix this. Fixes: b1f81b49 ("platform/x86: surface3_power: MSHW0011 rev-eng implementation") BugLink: https://github.com/linux-surface/linux-surface/issues/608Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by:
-
Mario Limonciello authored
commit 59348401 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") adds support for using another platform timer in lieu of the RTC which doesn't work properly on some systems. This path was validated and worked well before submission. During the 5.16-rc1 merge window other patches were merged that caused this to stop working properly. When this feature was used with 5.16-rc1 or later some OEM laptops with the matching firmware requirements from that commit would shutdown instead of program a timer based wakeup. This was bisected to commit 8d89835b ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any negative impacts and also tested well on both Intel and ARM platforms. However this changed the semantics of when CPUs are allowed to be in the deepest state. For the AMD systems in question it appears this causes a firmware crash for timer based wakeup. It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT` and all the CPUs going into a deep state while the timer is still being programmed. It's likely a firmware bug, but to avoid it don't allow setting CPUs into the deepest state while using CZN timer wakeup path. If later it's discovered that this also occurs from "regular" suspends without a timer as well or on other silicon, this may be later expanded to run in the suspend path for more scenarios. Cc: stable@vger.kernel.org # 5.16+ Suggested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e Fixes: 8d89835b ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Fixes: 23f62d7a ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions") Fixes: 59348401 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.comReviewed-by:
-
- 23 Feb, 2022 1 commit
-
-
Matan Ziv-Av authored
For now leave also the driver specific location, with deprecated warning in documentation. Signed-off-by:
Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/eca2fa354f60b8a6e5a5c9c8e244fea56616970a.1645278914.git.matan@svgalib.orgReviewed-by:
-
- 21 Feb, 2022 1 commit
-
-
Daniel Scally authored
Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Fixes: 19d8d6e3 ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell") Signed-off-by:
Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20220216225304.53911-5-djrscally@gmail.comReviewed-by:
-
- 17 Feb, 2022 6 commits
-
-
Mateusz Jończyk authored
The declaration EXPORT_SYMBOL(dcdbas_smi_request); was placed after smi_request_store(), which made a false impression that dcdbas_smi_request() was not exported. Signed-off-by:Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Link: https://lore.kernel.org/r/20220212125908.357588-1-mat.jonczyk@o2.plSigned-off-by:
-
Sanket Goswami authored
Spill to DRAM functionality is a feature that allows STB (Smart Trace Buffer) to spill data from SRAM into DRAM on some future AMD ASICs. The size allocated for STB is more than the earlier SoC's which helps to collect more tracing and telemetry data. Co-developed-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Sanket Goswami <Sanket.Goswami@amd.com> Reviewed-by:
-
Srinivas Pandruvada authored
Split the current driver in two parts: - Common part: All the commom function other than enumeration function. - Enumeration/HW specific part: The current enumeration using CPU model is left in the old module. This uses service of common driver to register sysfs objects. Also provide callbacks for MSR access related to uncore. - Add MODULE_DEVICE_TABLE to uncore-frequency.c No functional changes are expected. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@intel.com> Acked-by:
-
Srinivas Pandruvada authored
Add a new sysfs attribute "current_freq_khz" to display current uncore frequency. This value is read from MSR 0x621. Root user permission is required to read uncore current frequency. Signed-off-by:
-
Srinivas Pandruvada authored
Use of sysfs API is always preferable over using kobject calls to create attributes. Remove usage of kobject_init_and_add() and use sysfs_create_group(). To create relationship between sysfs attribute and uncore instance use device_attribute*, which is defined per uncore instance. To create uniform locking for both read and write attributes take lock in the sysfs callbacks, not in the actual functions where the MSRs are read or updated. No functional changes are expected. Signed-off-by:
-
Srinivas Pandruvada authored
Move the current driver from platform/x86/intel/uncore-frequency.c to platform/x86/intel/uncore-frequency/uncore-frequency.c. No functional changes are expected. Signed-off-by:
-
- 14 Feb, 2022 1 commit
-
-
David E. Box authored
Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for activating additional silicon features. Features are enabled through a license activation process. The SDSi driver provides a per socket, sysfs attribute interface for applications to perform 3 main provisioning functions: 1. Provision an Authentication Key Certificate (AKC), a key written to internal NVRAM that is used to authenticate a capability specific activation payload. 2. Provision a Capability Activation Payload (CAP), a token authenticated using the AKC and applied to the CPU configuration to activate a new feature. 3. Read the SDSi State Certificate, containing the CPU configuration state. The operations perform function specific mailbox commands that forward the requests to SDSi hardware to perform authentication of the payloads and enable the silicon configuration (to be made available after power cycling). The SDSi device itself is enumerated as an auxiliary device from the intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC. Link: https://github.com/intel/intel-sdsiSigned-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Mark Gross <markgross@kernel.org> Link: https://lore.kernel.org/r/20220212013252.1293396-2-david.e.box@linux.intel.comReviewed-by:
-
- 11 Feb, 2022 10 commits
-
-
Hans de Goede authored
Now that there is only 1 c-file left of the intel_cht_int33fe code, move it to the intel directory instead of it having its own int33fe sub-directory. Note this also renames the module from intel_cht_int33fe_typec to intel_chtwc_int33fe, to better match the names of other PMIC related modules like the intel_chtdc_ti_pwrbtn module. Signed-off-by:
-
Hans de Goede authored
Move the Lenovo Yogabook YB1-X9x fuel-gauge instantiation code over to the x86-android-tablets module, which already deals with this for various other devices. This removes the need to have a special intel_cht_int33fe_microb module just for Lenovo Yogabook YB1-X9x laptops. Signed-off-by:
-
Hans de Goede authored
The intel_cht_int33fe driver is intended to deal with ACPI INT33FE firmware-nodes on Cherry Trail devices with a Whiskey Cove PMIC. The original version of the driver only dealt with the GPD win and GPD pocket boards where the WC PMIC is connected to a TI BQ24292i charger, paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller + a PI3USB30532 USB switch, for a fully functional Type-C port. Later it was split into a Type-C and a Micro-B variant to deal with the Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 boards where the ACPI INT33FE firmware-node only describes the TI BQ27542 fuelgauge. Currently the driver differentiates between these 2 models by counting the number of I2cSerialBus resources in the firmware-node. There are a number of problems with this approach: 1. The driver autoloads based on the acpi:INT33FE modalias causing it to get loaded on almost all Bay Trail and Cherry Trail devices. It checks for the presence of a WC PMIC, so it won't bind but the loading still wastes time and memory. 2. Both code paths in the driver are really only designed for a single board and have harcoded various assumptions about these boards, if another design matching the current checks ever shows up the driver may end up doing something completely wrong. Avoid both issues by switching to using DMI based autoloading of the module, which has neither of these problems. Note this splits the previous intel_cht_int33fe kernel module into two modules: intel_cht_int33fe_typec and intel_cht_int33fe_microb, one for each model. Signed-off-by:
-
Hans de Goede authored
Minor charger / fuel-gauge improvements: 1. Make some of the names of charger / fuel-gauge related globals more generic in preparation for also using them on other boards. 2. Update the dev_name on the Asus ME176C and TF103C to reflect that these are using the bq24297 variant of the bq24190 family. 3. During review of the ug3105 driver the "upi,rsns-microohm" property was renamed to "upisemi,rsns-microohm" as "upisemi" is the correct vendor prefix, update the ug3105 properties accordingly. Signed-off-by:
-
Hans de Goede authored
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts. Enumeration of these is skipped through the acpi_quirk_skip_i2c_client_enumeration(). Add support for manually instantiating the I2C devices which are actually present on this tablet by adding the necessary device info to the x86-android-tablets module. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220205191356.225505-6-hdegoede@redhat.com
-
Hans de Goede authored
Add the IRQ for the accelerometer to the Asus ME176C board info. Signed-off-by:
-
Hans de Goede authored
The Asus ME176C + TF103C both have a lid-switch (for a cover in the ME176C case), add a gpio-keys platform-device and platform-data describing the lid-switch on both. Note the "intel-int3496" in the asus_me176c_tf103c_pdevs[] array is not new / not a change. This was already present in the generic int3496_pdevs[] array, to which pdev_info pointed before. The int3496_pdevs[] array contains just this entry for boards which only need that single pdev. Signed-off-by:
-
Hans de Goede authored
Factor the code to go from a gpiochip label + pin-numer to a gpio_desc out of x86_acpi_irq_helper_get() and make it into a new x86_android_tablet_get_gpiod() helper, as this will be necessary in some x86_dev_info.init() functions too. Signed-off-by:
-
Hans de Goede authored
Add properties describing the battery on the Asus ME176C / TF103C tablets. The max constant charge volt / current settings were taken from the factory Android image on these tablets. Signed-off-by:
-
Hans de Goede authored
power_supply_get_battery_info() which is used by charger and fuel-gauge drivers on x86-android-tablets, expects the battery properties to be described in a stand-alone battery fwnode which is then referenced from both the charger and fuel-gauge device's fwnodes. Add support for registering + unregistering a swnode for this. Signed-off-by:
-
- 05 Feb, 2022 1 commit
-
-
Hans de Goede authored
The fan curve control patches introduced a regression for at least the TUF FX506 and possibly other TUF series laptops that do not have support for fan curve control. As part of the probing process, asus_wmi_evaluate_method_buf is called to get the factory default fan curve . The WMI management function returns 0 on certain laptops to indicate lack of fan curve control instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to -ENODATA which results in failure when probing. Fixes: 0f0ac158 ("platform/x86: asus-wmi: Add support for custom fan curves") Reported-and-tested-by:
Abhijeet V <abhijeetviswa@gmail.com> Signed-off-by:
-
- 03 Feb, 2022 4 commits
-
-
Christophe JAILLET authored
's3_wmi.input' is a managed resource, so there should be no need to free it explicitly. Moreover, 's3_wmi' is a global variable. 's3_wmi.input' should be NULL when this error handling path is executed, because it has not been assigned yet. All this is puzzling. So simplify it and remove a few lines of code to have it be more straightforward. Fixes: 3dda3b37 ("platform/x86: Add custom surface3 platform device for controlling LID") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Rafael J. Wysocki authored
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by:
-
Rafael J. Wysocki authored
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by:
-
Hans de Goede authored
The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by:
David Dreschner <david@dreschner.net> Signed-off-by:
-
- 02 Feb, 2022 6 commits
-
-
Hans de Goede authored
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag + the other patches from the "[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver" series.
-
Lucas Tanure authored
The ACPI device with CSC3551 or CLSA0100 are sound cards with multiple instances of CS35L41 connected by I2C or SPI to the main CPU. We add an ID to the ignore_serial_bus_ids list to enumerate all I2C or SPI devices correctly. The same IDs are also added into serial-multi-instantiate so that the driver can correctly enumerate the ACPI. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220121172431.6876-10-sbinding@opensource.cirrus.comReviewed-by:
-
Lucas Tanure authored
Add support for two and four CS35L41 using the component binding method Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220121172431.6876-9-sbinding@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
Add support for spi bus in serial-multi-instantiate driver Some peripherals can have either a I2C or a SPI connection to the host (but not both) but use the same HID for both types. So it is not possible to use the HID to determine whether it is I2C or SPI. The driver must check the node to see if it contains I2cSerialBus or SpiSerialBus entries. For backwards-compatibility with the existing nodes I2C is checked first and if such entries are found ONLY I2C devices are created. Since some existing nodes that were already handled by this driver could also contain unrelated SpiSerialBus nodes that were previously ignored, and this preserves that behavior. If there is ever a need to handle a node where both I2C and SPI devices must be instantiated this can be added in future. Signed-off-by:
-
Lucas Tanure authored
Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support Also switched from strlcpy() to strscpy() Signed-off-by:
-
Lucas Tanure authored
Rename I2C multi instantiate driver to serial-multi-instantiate for upcoming addition of SPI support Signed-off-by:
-
- 01 Feb, 2022 5 commits
-
-
Stefan Binding authored
Some ACPI nodes may have more than one Spi Resource. To be able to handle these case, its necessary to have a way of counting these resources. Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Stefan Binding authored
If a node contains more than one SPI resource it may be necessary to use an index to select which one you want to allocate a spi device for. Signed-off-by:
-
Stefan Binding authored
This can then be used to find a spi resource inside an ACPI node, and allocate a spi device. Signed-off-by:
-
Stefan Binding authored
This functions were previously made private since they were not used. However, these functions will be needed again. Partial revert of commit da21fde0 ("spi: Make several public functions private to spi.c") Signed-off-by:
-
Mark Pearson authored
Lenovo AMD based platforms have been offering platform_profiles but they are not working correctly. This is because the mode we are using on the Intel platforms (MMC) is not available on the AMD platforms. This commit adds checking of the functional capabilities returned by the BIOS to confirm if MMC is supported or not. Profiles will not be available if the platform is not MMC capable. I'm investigating and working on an alternative for AMD platforms but that is still work-in-progress. Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.comReviewed-by:
-
- 24 Jan, 2022 2 commits
-
-
Mario Limonciello authored
Yellow carp has been outputting versions like `1093.24.0`, but this is supposed to be 69.24.0. That is the MSB is being interpreted incorrectly. The MSB is not part of the major version, but has generally been treated that way thus far. It's actually the program, and used to distinguish between two programs from a similar family but different codebase. Link: https://patchwork.freedesktop.org/patch/469993/Signed-off-by:
-
Hans de Goede authored
tf103c_dock_hid_ll_driver and tf103c_dock_pm_ops are not used outside of the driver, make them both static. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
