To support high resolutions on sm8350, enable smartdma
in its catalog.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556561/
Link: https://lore.kernel.org/r/20230908193314.27008-1-quic_abhinavk@quicinc.com
[DB: rebased on top of msm-next]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Enable the SmartDMA / multirect support on the SM8450 platform to
support higher resoltion modes.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/561590/
Link: https://lore.kernel.org/r/20231009165627.2691015-1-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

It's certainly possible that for large resolutions a single DPU SSPP
cannot process the image without exceeding the MDP clock limits but
it can still process it in multirect mode because the source rectangles
will get divided and can fall within the MDP clock limits.

If the SSPP cannot process the image even in multirect mode, then it
will be rejected in dpu_plane_atomic_check_pipe().

Hence try using multirect for resolutions which cannot be processed
by a single SSPP without exceeding the MDP clock limits.

changes in v2:
	- use crtc_state's adjusted_mode instead of mode
	- fix the UBWC condition to check maxlinewidth
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556817/
Link: https://lore.kernel.org/r/20230911221627.9569-2-quic_abhinavk@quicinc.comSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

KGSL doesn't support a690 so all reg values were the same as
on a660. Now we know the values and they are different from the
windows driver.

This fixes hangs on D3D12 games and some CTS tests.
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568931/

Downstream always set BIT(7)
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568930/

For allocations with userspace controlled size, we should not warn on
allocation failure.  Fixes KASAN splat:

   WARNING: CPU: 6 PID: 29557 at mm/page_alloc.c:5398 __alloc_pages+0x160c/0x2204
   Modules linked in: bridge stp llc hci_vhci tun veth xt_cgroup uinput xt_MASQUERADE rfcomm ip6table_nat fuse 8021q r8153_ecm cdc_ether usbnet r8152 mii venus_enc venus_dec uvcvideo algif_hash algif_skcipher af_alg qcom_spmi_adc_tm5 qcom_spmi_adc5 qcom_vadc_common qcom_spmi_temp_alarm cros_ec_typec typec hci_uart btqca qcom_stats snd_soc_sc7180 venus_core ath10k_snoc ath10k_core ath coresight_tmc coresight_replicator coresight_etm4x coresight_funnel snd_soc_lpass_sc7180 mac80211 coresight bluetooth ecdh_generic ecc cfg80211 cros_ec_sensorhub lzo_rle lzo_compress zram joydev
   CPU: 6 PID: 29557 Comm: syz-executor Not tainted 5.15.110-lockdep-19320-g89d010b0a9df #1 45bdd400697a78353f2927c116615abba810e5dd
   Hardware name: Google Kingoftown (DT)
   pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
   pc : __alloc_pages+0x160c/0x2204
   lr : __alloc_pages+0x58/0x2204
   sp : ffffffc0214176c0
   x29: ffffffc0214178a0 x28: ffffff801f7b4000 x27: 0000000000000000
   x26: ffffff808a4fa000 x25: 1ffffff011290781 x24: ffffff808a59c000
   x23: 0000000000000010 x22: ffffffc0080e6980 x21: 0000000000000010
   x20: 0000000000000000 x19: 00000000080001f8 x18: 0000000000000000
   x17: 0000000000000000 x16: 0000000000000000 x15: 0000000020000500
   x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
   x11: 0000000000000000 x10: 1ffffff804282f06 x9 : 0000000000000000
   x8 : ffffffc021417848 x7 : 0000000000000000 x6 : ffffffc0082ac788
   x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000010
   x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffffffc021417830
   Call trace:
   __alloc_pages+0x160c/0x2204
   kmalloc_order+0x50/0xf4
   kmalloc_order_trace+0x38/0x18c
   __kmalloc+0x300/0x45c
   msm_ioctl_gem_submit+0x284/0x5988
   drm_ioctl_kernel+0x270/0x418
   drm_ioctl+0x5e0/0xbf8
   __arm64_sys_ioctl+0x154/0x1d0
   invoke_syscall+0x98/0x278
   el0_svc_common+0x214/0x274
   do_el0_svc+0x9c/0x19c
   el0_svc+0x5c/0xc0
   el0t_64_sync_handler+0x78/0x108
   el0t_64_sync+0x1a4/0x1a8
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/564191/

Error messages resulting from incorrect usage of the kernel uabi should
not spam dmesg by default.  But it is useful to enable them to debug
userspace.  So demote to DRM_UT_DRIVER.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/564189/

The EXT_external_objects extension is a bit awkward as it doesn't pass
explicit modifiers, leaving the importer to guess with incomplete
information.  In the case of vk (turnip) exporting and gl (freedreno)
importing, the "OPTIMAL_TILING_EXT" layout depends on VkImageCreateInfo
flags (among other things), which the importer does not know.  Which
unfortunately leaves us with the need for a metadata back-channel.

The contents of the metadata are defined by userspace.  The
EXT_external_objects extension is only required to work between
compatible versions of gl and vk drivers, as defined by device and
driver UUIDs.

v2: add missing metadata kfree
v3: Rework to move copy_from/to_user out from under gem obj lock
    to avoid angering lockdep about deadlocks against fs-reclaim
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/566157/

Correct the minor version exposed and error return value for
MSM_INFO_GET_NAME.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/566155/

If there is no GPU present, skip creation of the GPU-related debugfs
files, making the MSM's debugfs more usable.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/561742/Signed-off-by: Rob Clark <robdclark@chromium.org>

If we somehow raced with submit retiring, either while waiting for
worker to have a chance to run or acquiring the gpu lock, then the
recover worker should just bail.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568034/

Until various PM devfreq/QoS and interconnect patches land, we could
potentially trigger reclaim from gpu scheduler thread, and under enough
memory pressure that could trigger a sort of deadlock.  Eventually the
wait will timeout and we'll move on to consider other GEM objects.  But
given that there is still a potential for deadlock/stalling, we should
reduce the timeout to contain the damage.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/568031/

The dpu devcore's are already associated with the dpu device.  So we
should associate the gpu devcore's with the gpu device, for easier
classification.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/567738/

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

amd-drm-next-6.7-2023-11-10:

amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: one Kconfig
  dependency fix and another fix for a long standing issue where a sync
  transfer races with system suspend"

* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix null dereference on suspend
  spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix broken cache-flush support for Micron eMMCs
   - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'

  MMC host:
   - sdhci_am654: Fix TAP value parsing for legacy speed mode
   - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
   - vub300: Fix an error path in probe"

* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
  mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
  Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
  mmc: vub300: fix an error code
  mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
  mmc: sdhci_am654: fix start loop index for TAP value parsing

Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "This contains two very small fixes that I failed to include in the
  main pull request"

* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix double shift bug
  pwm: samsung: Fix a bit test in pwm_samsung_resume()

Pull io_uring fixes from Jens Axboe:
 "Mostly just a few fixes and cleanups caused by the read multishot
  support.

  Outside of that, a stable fix for how a connect retry is done"

* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
  io_uring: do not clamp read length for multishot read
  io_uring: do not allow multishot read to set addr or len
  io_uring: indicate if io_kbuf_recycle did recycle anything
  io_uring/rw: add separate prep handler for fixed read/write
  io_uring/rw: add separate prep handler for readv/writev
  io_uring/net: ensure socket is marked connected on connect retry
  io_uring/rw: don't attempt to allocate async data if opcode doesn't need it

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - nvme keyring config compile fixes (Hannes and Arnd)
      - fabrics keep alive fixes (Hannes)
      - tcp authentication fixes (Mark)
      - io_uring_cmd error handling fix (Anuj)
      - stale firmware attribute fix (Daniel)
      - tcp memory leak (Christophe)
      - crypto library usage simplification (Eric)

 - nbd use-after-free fix. May need a followup, but at least it's better
   than what it was before (Li)

 - Rate limit write on read-only device warnings (Yu)

* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
  nvme: keyring: fix conditional compilation
  nvme: common: make keyring and auth separate modules
  blk-core: use pr_warn_ratelimited() in bio_check_ro()
  nbd: fix uaf in nbd_open
  nvme: start keep-alive after admin queue setup
  nvme-loop: always quiesce and cancel commands before destroying admin q
  nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
  nvme-auth: always set valid seq_num in dhchap reply
  nvme-auth: add flag for bi-directional auth
  nvme-auth: auth success1 msg always includes resp
  nvme: fix error-handling for io_uring nvme-passthrough
  nvme: update firmware version after commit
  nvme-tcp: Fix a memory leak
  nvme-auth: use crypto_shash_tfm_digest()

Pull ata fixes from Damien Le Moal:

 - Revert a change in ata_pci_shutdown_one() to suspend disks on
   shutdown as this is now done using the manage_shutdown scsi device
   flag (me)

 - Change the pata_falcon and pata_gayle drivers to stop using
   module_platform_driver_probe(). This makes these drivers more inline
   with all other drivers (allowing bind/unbind) and suppress a
   compilation warning (Uwe)

 - Convert the pata_falcon and pata_gayle drivers to the new
   .remove_new() void-return callback. These 2 drivers are the last ones
   needing this change (Uwe)

* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_gayle: Convert to platform remove callback returning void
  ata: pata_falcon: Convert to platform remove callback returning void
  ata: pata_gayle: Stop using module_platform_driver_probe()
  ata: pata_falcon: Stop using module_platform_driver_probe()
  ata: libata-core: Fix ata_pci_shutdown_one()

Pull dma-mapping fixes from Christoph Hellwig:

 - don't leave pages decrypted for DMA in encrypted memory setups linger
   around on failure (Petr Tesarik)

 - fix an out of bounds access in the new dynamic swiotlb code (Petr
   Tesarik)

 - fix dma_addressing_limited for systems with weird physical memory
   layouts (Jia He)

* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
  dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
  dma-mapping: move dma_addressing_limited() out of line
  swiotlb: do not free decrypted pages if dynamic

Pull lsm updates from Paul Moore:
 "We've got two small patches to correct the default return
  value of two LSM hooks: security_vm_enough_memory_mm() and
  security_inode_getsecctx()"

* tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix default return value for inode_getsecctx
  lsm: fix default return value for vm_enough_memory

Pull smb server fixes from Steve French:

 - slab out of bounds fix in ACL handling

 - fix malformed request oops

 - minor doc fix

* tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd:
  ksmbd: handle malformed smb1 message
  ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked()
  ksmbd: fix slab out of bounds write in smb_inherit_dacl()

Pull ceph updates from Ilya Dryomov:

 - support for idmapped mounts in CephFS (Christian Brauner, Alexander
   Mikhalitsyn).

   The series was originally developed by Christian and later picked up
   and brought over the finish line by Alexander, who also contributed
   an enabler on the MDS side (separate owner_{u,g}id fields on the
   wire).

   The required exports for mnt_idmap_{get,put}() in VFS have been acked
   by Christian and received no objection from Christoph.

 - a churny change in CephFS logging to include cluster and client
   identifiers in log and debug messages (Xiubo Li).

   This would help in scenarios with dozens of CephFS mounts on the same
   node which are getting increasingly common, especially in the
   Kubernetes world.

* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
  ceph: allow idmapped mounts
  ceph: allow idmapped atomic_open inode op
  ceph: allow idmapped set_acl inode op
  ceph: allow idmapped setattr inode op
  ceph: pass idmap to __ceph_setattr
  ceph: allow idmapped permission inode op
  ceph: allow idmapped getattr inode op
  ceph: pass an idmapping to mknod/symlink/mkdir
  ceph: add enable_unsafe_idmap module parameter
  ceph: handle idmapped mounts in create_request_message()
  ceph: stash idmapping in mdsc request
  fs: export mnt_idmap_get/mnt_idmap_put
  libceph, ceph: move mdsmap.h to fs/ceph
  ceph: print cluster fsid and client global_id in all debug logs
  ceph: rename _to_client() to _to_fs_client()
  ceph: pass the mdsc to several helpers
  libceph: add doutc and *_client debug macros support

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for handling misaligned accesses in S-mode

 - Probing for misaligned access support is now properly cached and
   handled in parallel

 - PTDUMP now reflects the SW reserved bits, as well as the PBMT and
   NAPOT extensions

 - Performance improvements for TLB flushing

 - Support for many new relocations in the module loader

 - Various bug fixes and cleanups

* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  riscv: Optimize bitops with Zbb extension
  riscv: Rearrange hwcap.h and cpufeature.h
  drivers: perf: Do not broadcast to other cpus when starting a counter
  drivers: perf: Check find_first_bit() return value
  of: property: Add fw_devlink support for msi-parent
  RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
  riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
  riscv: Don't use PGD entries for the linear mapping
  RISC-V: Probe misaligned access speed in parallel
  RISC-V: Remove __init on unaligned_emulation_finish()
  RISC-V: Show accurate per-hart isa in /proc/cpuinfo
  RISC-V: Don't rely on positional structure initialization
  riscv: Add tests for riscv module loading
  riscv: Add remaining module relocations
  riscv: Avoid unaligned access when relocating modules
  riscv: split cache ops out of dma-noncoherent.c
  riscv: Improve flush_tlb_kernel_range()
  riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
  riscv: Improve flush_tlb_range() for hugetlb pages
  riscv: Improve tlb_flush()
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - removed AR7 platform support

 - cleanups and fixes

* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: AR7: remove platform
  watchdog: ar7_wdt: remove driver to prepare for platform removal
  vlynq: remove bus driver
  mtd: parsers: ar7: remove support
  serial: 8250: remove AR7 support
  arch: mips: remove ReiserFS from defconfig
  MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
  MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
  MIPS: KVM: Fix a build warning about variable set but not used
  MIPS: Remove dead code in relocate_new_kernel
  mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
  mips: dts: ralink: mt7621: define each reset as an item
  mips: dts: ingenic: Remove unneeded probe-type properties
  MIPS: loongson32: Remove dma.h and nand.h

When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.

Fixes: 18025378 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org