- 22 Feb, 2018 24 commits
-
-
Stefan Agner authored
commit ea56fb28 upstream. With commit 3cf32d18 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e07 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e07 ("mtd: nand: add ooblayout for old hamming layout") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kurz authored
commit 26d99834 upstream. When a 9p request is successfully flushed, the server is expected to just mark it as used without sending a 9p reply (ie, without writing data into the buffer). In this case, virtqueue_get_buf() will return len == 0 and we must not report a REQ_STATUS_RCVD status to the client, otherwise the client will erroneously assume the request has not been flushed. Cc: stable@vger.kernel.org Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Liu Bo authored
commit 900c9981 upstream. The highest objectid, which is assigned to new inode, is decided at the time of initializing fs roots. However, in cases where log replay gets processed, the btree which fs root owns might be changed, so we have to search it again for the highest objectid, otherwise creating new inode would end up with -EEXIST. cc: <stable@vger.kernel.org> v4.4-rc6+ Fixes: f32e48e9 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Liu Bo authored
commit e8f1bc14 upstream. This regression is introduced in commit 3d48d981 ("btrfs: Handle uninitialised inode eviction"). There are two problems, a) it is ->destroy_inode() that does the final free on inode, not ->evict_inode(), b) clear_inode() must be called before ->evict_inode() returns. This could end up hitting BUG_ON(inode->i_state != (I_FREEING | I_CLEAR)); in evict() because I_CLEAR is set in clear_inode(). Fixes: commit 3d48d981 ("btrfs: Handle uninitialised inode eviction") Cc: <stable@vger.kernel.org> # v4.7-rc6+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Liu Bo authored
commit 55237a5f upstream. It's possible that btrfs_sync_log() bails out after one of the two btrfs_write_marked_extents() which convert extent state's state bit into EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY and EXTENT_NEW are searched by free_log_tree() so that those extent states with EXTENT_NEED_WAIT lead to memory leak. cc: <stable@vger.kernel.org> Signed-off-by:
-
Liu Bo authored
commit 1846430c upstream. In cases that the whole fs flips into readonly status due to failures in critical sections, then log tree's blocks are still dirty, and this leads to a crash during umount time, the crash is about use-after-free, umount -> close_ctree -> stop workers -> iput(btree_inode) -> iput_final -> write_inode_now -> ... -> queue job on stop'd workers cc: <stable@vger.kernel.org> v3.12+ Fixes: 681ae509 ("Btrfs: cleanup reserved space when freeing tree log on error") Signed-off-by:
-
Liu Bo authored
commit e8916699 upstream. @cur_offset is not set back to what it should be (@cow_start) if btrfs_next_leaf() returns something wrong, and the range [cow_start, cur_offset) remains locked forever. cc: <stable@vger.kernel.org> Signed-off-by:
-
David Disseldorp authored
commit ce512d79 upstream. If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then crypto_free_shash() is called with a NULL pointer which gets dereferenced in crypto_shash_tfm(). Fixes: 69110e3c ("iscsi-target: Use shash and ahash") Suggested-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David Disseldorp <ddiss@suse.de> Cc: stable@vger.kernel.org # 4.6+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Larry Finger authored
commit c713fb07 upstream. There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by:
Pkshih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Nicolas Pitre authored
commit 724ba8b3 upstream. When this method is set, the caller expects struct console_font fields to be properly initialized when it returns. Leave it unset otherwise nonsensical (leaked kernel stack) values are returned to user space. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit 9cb18db0 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent display node was also prematurely freed. Note that the display and timings node references are never put after a successful dt-initialisation so the nodes would leak on later probe deferrals and on driver unbind. Fixes: b985172b ("video: atmel_lcdfb: add device tree suport") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit eac56aa3 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Corentin Labbe authored
commit 2e6522c5 upstream. MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does not exist. Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig name. Note that BMIPS_GENERIC does the same which confirms that this patch is needed. Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.9+ Patchwork: https://patchwork.linux-mips.org/patch/18495/ [jhogan@kernel.org: Clean up commit message] Signed-off-by:
-
Jan H. Schönherr authored
commit 10a0cd6e upstream. The functions devm_memremap_pages() and devm_memremap_pages_release() use different ways to calculate the section-aligned amount of memory. The latter function may use an incorrect size if the memory region is small but straddles a section border. Use the same code for both. Cc: <stable@vger.kernel.org> Fixes: 5f29a77c ("mm: fix mixed zone detection in devm_memremap_pages") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit af27d940 upstream. We get a warning about some slow configurations in randconfig kernels: mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp] The warning is reasonable by itself, but gets in the way of randconfig build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set. The warning was added in 2013 in commit 75980e97 ("mm: fold page->_last_nid into page->flags where possible"). Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ernesto A. Fernández authored
commit 9f037248 upstream. The grpid option is currently described as being the same as nogrpid. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Zhouyi Zhou authored
commit 06f29cc8 upstream. In the function __ext4_grp_locked_error(), __save_error_info() is called to save error info in super block block, but does not sync that information to disk to info the subsequence fsck after reboot. This patch writes the error information to disk. After this patch, I think there is no obvious EXT4 error handle branches which leads to "Remounting filesystem read-only" will leave the disk partition miss the subsequence fsck. Signed-off-by:
Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by:
-
Harshad Shirwadkar authored
commit abbc3f93 upstream. This patch fixes a race between the shutdown path and bio completion handling. In the ext4 direct io path with async io, after submitting a bio to the block layer, if journal starting fails, ext4_direct_IO_write() would bail out pretending that the IO failed. The caller would have had no way of knowing whether or not the IO was successfully submitted. So instead, we return -EIOCBQUEUED in this case. Now, the caller knows that the IO was submitted. The bio completion handler takes care of the error. Tested: Ran the shutdown xfstest test 461 in loop for over 2 hours across 4 machines resulting in over 400 runs. Verified that the race didn't occur. Usually the race was seen in about 20-30 iterations. Signed-off-by:
Harshad Shirwadkar <harshads@google.com> Signed-off-by:
-
Tobin C. Harding authored
commit f69120ce upstream. Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs. Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Alexander Potapenko authored
commit 3876bbe2 upstream. KMSAN reported use of uninitialized |entry->e_referenced| in a condition in mb_cache_shrink(): ================================================================== BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 mb_cache_scan+0x67/0x80 fs/mbcache.c:321 do_shrink_slab mm/vmscan.c:397 [inline] shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500 shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603 kswapd_shrink_node mm/vmscan.c:3172 [inline] balance_pgdat mm/vmscan.c:3289 [inline] kswapd+0x160f/0x2850 mm/vmscan.c:3478 kthread+0x46c/0x5f0 kernel/kthread.c:230 ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430 chained origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_save_stack mm/kmsan/kmsan.c:317 [inline] kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547 __msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257 mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766 mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # v4.6 Signed-off-by:
-
Stewart Smith authored
commit 5b8b5806 upstream. According to the OPAL docs: skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and this indicates either a transient or permanent error. Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a permanent error particularly well, in that you could end up in a busy loop. This was not too hard to trigger on an AMI BMC based OpenPOWER machine doing a continuous "ipmitool mc reset cold" to the BMC, the result of that being that we'd get stuck in an infinite loop in opal_get_rtc_time(). We now retry a few times before returning the error higher up the stack. Fixes: 16b1d26e ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
commit 3a61b527 upstream. Check the variable that was most recently initialized. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x, y, f, g, e, m; statement S1,S2,S3,S4; @@ x = f(...); if (\(<+...x...+>\&e\)) S1 else S2 ( x = g(...); | m = g(...,&x,...); | y = g(...); *if (e) S3 else S4 ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 239b5f64 upstream. Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370Acked-by:
-
Steffen Weber authored
commit dc2db1dc upstream. If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module. Signed-off-by:
Steffen Weber <steffen.weber@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
- 17 Feb, 2018 16 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (VMware) authored
commit 7b658656 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba00929 ("ftrace: Introduce ftrace_glob structure") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Eric W. Biederman authored
commit 6ac1dc73 upstream. Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Fixes: b920de1b ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Amir Goldstein authored
commit d796e77f upstream. As a writable mount, it is not expected for overlayfs to return EINVAL/EROFS for fsync, even if dir/file is not changed. This commit fixes the case of fsync of directory, which is easier to address, because overlayfs already implements fsync file operation for directories. The problem reported by Raphael is that new PostgreSQL 10.0 with a database in overlayfs where lower layer in squashfs fails to start. The failure is due to fsync error, when PostgreSQL does fsync on all existing db directories on startup and a specific directory exists lower layer with no changes. Reported-by:
Raphael Hertzog <raphael@ouaza.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Tested-by:
Raphaël Hertzog <hertzog@debian.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Toshi Kani authored
commit 23fbd7c7 upstream. A NULL pointer reference kernel bug was observed when acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This error path does not set nfit_mem->nvdimm, but the 2nd list_for_each_entry() loop in the function assumes it's always set. Add a check to nfit_mem->nvdimm. Fixes: ba9c8dd3 ("acpi, nfit: add dimm device notification support") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 43cdd1b7 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by:
Wang Qize <wang_qize@venustech.com.cn> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Imre Deak authored
commit 5643205c upstream. We store a SW state of the t11_t12 timing in 100usec units but have to program it in 100msec as required by HW. The rounding used during programming means there will be a mismatch between the SW and HW states of this value triggering a "PPS state mismatch" error. Avoid this by storing the already rounded-up value in the SW state. Note that we still calculate panel_power_cycle_delay with the finer 100usec granularity to avoid any needless waits using that version of the delay. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903 Cc: joks <joks@linux.pl> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.comSigned-off-by:
-
Nikolay Borisov authored
commit f3038ee3 upstream. This function was introduced by 247e743c ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Andrey Ryabinin authored
commit 42440c1f upstream. UBSAN=y fails to build with new GCC/clang: arch/x86/kernel/head64.o: In function `sanitize_boot_params': arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1' because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors. Compiler now uses new __ubsan_handle_type_mismatch_v1() function with slightly modified 'struct type_mismatch_data'. Let's add new 'struct type_mismatch_data_common' which is independent from compiler's layout of 'struct type_mismatch_data'. And make __ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent type mismatch data to our internal representation. This way, we can support both old and new compilers with minimal amount of change. Link: http://lkml.kernel.org/r/20180119152853.16806-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Sodagudi Prasad <psodagud@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
commit b8fe1120 upstream. A vist from the spelling fairy. Cc: David Laight <David.Laight@ACULAB.COM> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Daniel Lezcano authored
commit e0aeca3d upstream. The current code hides a couple of bugs: - The global variable 'clock_event_ddata' is overwritten each time the init function is invoked. This is fixed with a kmemdup() instead of assigning the global variable. That prevents a memory corruption when several timers are defined in the DT. - The clockevent's event_handler is NULL if the time framework does not select the clockevent when registering it, this is fine but the init code generates in any case an interrupt leading to dereference this NULL pointer. The stm32 timer works with shadow registers, a mechanism to cache the registers. When a change is done in one buffered register, we need to artificially generate an event to force the timer to copy the content of the register to the shadowed register. The auto-reload register (ARR) is one of the shadowed register as well as the prescaler register (PSC), so in order to force the copy, we issue an event which in turn leads to an interrupt and the NULL dereference. This is fixed by inverting two lines where we clear the status register before enabling the update event interrupt. As this kernel crash is resulting from the combination of these two bugs, the fixes are grouped into a single patch. Tested-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Bart Van Assche authored
commit 5a0ec388 upstream. Commit 523e1d39 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d39 ("block: make gendisk hold a reference to its queue") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mika Westerberg authored
commit f5a26acf upstream. When a GPIO is requested using gpiod_get_* APIs the intel pinctrl driver switches the pin to GPIO mode and makes sure interrupts are routed to the GPIO hardware instead of IOAPIC. However, if the GPIO is used directly through irqchip, as is the case with many I2C-HID devices where I2C core automatically configures interrupt for the device, the pin is not initialized as GPIO. Instead we rely that the BIOS configures the pin accordingly which seems not to be the case at least in Asus X540NA SKU3 with Focaltech touchpad. When the pin is not properly configured it might result weird behaviour like interrupts suddenly stop firing completely and the touchpad stops responding to user input. Fix this by properly initializing the pin to GPIO mode also when it is used directly through irqchip. Fixes: 7981c001 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Reported-by:
Daniel Drake <drake@endlessm.com> Reported-and-tested-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
James Hogan authored
commit 544e9258 upstream. Fix an uninitialized variable warning in the Octeon EDAC driver, as seen in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU Tools 2016.05-03: drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’: drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \ be used uninitialized in this function [-Wmaybe-uninitialized] if (int_reg.s.sec_err || int_reg.s.ded_err) { ^ Iinitialise the whole int_reg variable to zero before the conditional assignments in the error injection case. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Fixes: 1bc021e8 ("EDAC: Octeon: Add error injection support") Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Max Filippov authored
commit ca474809 upstream. Return 0 if the operation was successful, not the userspace memory value. Check that userspace value equals passed oldval, not itself. Don't update *uval if the value wasn't read from userspace memory. This fixes process hang due to infinite loop in futex_lock_pi. It also fixes a bunch of glibc tests nptl/tst-mutexpi*. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 4b01abdb upstream. Since version 4.9, the kernel automatically breaks printk calls into multiple newlines unless pr_cont is used. Fix the alpha stacktrace code, so that it prints stack trace in four columns, as it was initially intended. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
