- 27 Feb, 2023 1 commit
-
-
Pedro Tammela authored
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy for the tc actions code. It should sit within TCA_ACT_TAB. Fixes: 0349b877 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Feb, 2023 14 commits
-
-
Russell King (Oracle) authored
During review of ocelot_ext, it created a private phylink instance that wasn't necessary. This was removed for subsequent postings, but the include file seems to have been left behind. Remove it. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Regressions in Ocelot switch drivers These are 3 patches which resolve a regression in the Seville driver, one in the Felix driver and a generic one which affects any kernel compiled with 2 Kconfig options enabled. All of them have in common my lack of attention during review/testing. The patches touch the DSA, MFD and MDIO drivers for Ocelot. I think it would be preferable if all patches went through netdev (with Lee's Ack). ==================== Signed-off-by: -
Vladimir Oltean authored
When compiling a kernel which has both CONFIG_NET_DSA_MSCC_OCELOT_EXT and CONFIG_MSCC_OCELOT_SWITCH enabled, the following error message will be printed: [ 5.266588] Error: Driver 'ocelot-switch' is already registered, aborting... Rename the ocelot_ext.c driver to "ocelot-ext-switch" to avoid the name duplication, and update the mfd_cell entry for its resources. Fixes: 3d7316ac ("net: dsa: ocelot: add external ocelot switch control") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Vladimir Oltean authored
The blamed commit did not properly convert the resource start/end format into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a resource for vsc9959_imdio_res which is much longer than expected: $ cat /proc/iomem 1f8000000-1f815ffff : pcie@1f0000000 1f8140000-1f815ffff : 0000:00:00.5 1f8148030-1f815006f : imdio vs (correct) $ cat /proc/iomem 1f8000000-1f815ffff : pcie@1f0000000 1f8140000-1f815ffff : 0000:00:00.5 1f8148030-1f814803f : imdio Luckily it's not big enough to exceed the size of the parent resource (pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap with anything else that the Linux driver uses currently, so the larger than expected size isn't a practical problem that I can see. Although it is clearly wrong in the /proc/iomem output. Fixes: 044d447a ("net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources") Signed-off-by: -
Vladimir Oltean authored
During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit 84705fc1 ("net: dsa: felix: introduce support for Seville VSC9953 switch") was ignoring these bits, perhaps deliberately (although unbeknownst to me). This is an old IP and the hardware team cannot seem to be able to help me track down a plausible reason for these failures. I'll keep investigating, but in the meantime, this is a direct regression which must be restored to a working state. The only thing I can do is keep ignoring the errors as before. Fixes: b9965845 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by:
-
David S. Miller authored
Pedro Tammela says: ==================== net/sched: fix action bind logic Some actions are not handling the case where an action can be created and bound to a filter independently. These actions are checking for parameters only passed in the netlink message for create/change/replace, which then errors out for valid uses like: tc filter ... action pedit index 1 In the iproute2 side, we saw a couple of actions with their parsers broken when passing "index 1" as the only action argument, while the kernel side accepted it correctly. We fixed those as well. ==================== Signed-off-by: -
Pedro Tammela authored
The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action sample ... index 1 tc filter add ... action pedit index 1 In the current code for act_sample this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..29 ok 1 9784 - Add valid sample action with mandatory arguments ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action ok 3 334b - Add valid sample action with mandatory arguments and drop control action ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action ok 6 1886 - Add valid sample action with mandatory arguments and jump control action ok 7 7571 - Add sample action with invalid rate ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action ok 9 a874 - Add invalid sample action without mandatory arguments ok 10 ac01 - Add invalid sample action without mandatory argument rate ok 11 4203 - Add invalid sample action without mandatory argument group ok 12 14a7 - Add invalid sample action without mandatory argument group ok 13 8f2e - Add valid sample action with trunc argument ok 14 45f8 - Add sample action with maximum rate argument ok 15 ad0c - Add sample action with maximum trunc argument ok 16 83a9 - Add sample action with maximum group argument ok 17 ed27 - Add sample action with invalid rate argument ok 18 2eae - Add sample action with invalid group argument ok 19 6ff3 - Add sample action with invalid trunc size ok 20 2b2a - Add sample action with invalid index ok 21 dee2 - Add sample action with maximum allowed index ok 22 560e - Add sample action with cookie ok 23 704a - Replace existing sample action with new rate argument ok 24 60eb - Replace existing sample action with new group argument ok 25 2cce - Replace existing sample action with new trunc argument ok 26 59d1 - Replace existing sample action with new control argument ok 27 0a6e - Replace sample action with invalid goto chain control ok 28 3872 - Delete sample action with valid index ok 29 a394 - Delete sample action with invalid index Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Reviewed-by:
-
Pedro Tammela authored
The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action mpls ... index 1 tc filter add ... action mpls index 1 In the current code for act_mpls this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..53 ok 1 a933 - Add MPLS dec_ttl action with pipe opcode ok 2 08d1 - Add mpls dec_ttl action with pass opcode ok 3 d786 - Add mpls dec_ttl action with drop opcode ok 4 f334 - Add mpls dec_ttl action with reclassify opcode ok 5 29bd - Add mpls dec_ttl action with continue opcode ok 6 48df - Add mpls dec_ttl action with jump opcode ok 7 62eb - Add mpls dec_ttl action with trap opcode ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length ok 10 9118 - Add mpls dec_ttl action with invalid opcode ok 11 6ce1 - Add mpls dec_ttl action with label (invalid) ok 12 352f - Add mpls dec_ttl action with tc (invalid) ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid) ok 14 6b79 - Add mpls dec_ttl action with bos (invalid) ok 15 d4c4 - Add mpls pop action with ip proto ok 16 91fb - Add mpls pop action with ip proto and cookie ok 17 92fe - Add mpls pop action with mpls proto ok 18 7e23 - Add mpls pop action with no protocol (invalid) ok 19 6182 - Add mpls pop action with label (invalid) ok 20 6475 - Add mpls pop action with tc (invalid) ok 21 067b - Add mpls pop action with ttl (invalid) ok 22 7316 - Add mpls pop action with bos (invalid) ok 23 38cc - Add mpls push action with label ok 24 c281 - Add mpls push action with mpls_mc protocol ok 25 5db4 - Add mpls push action with label, tc and ttl ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length ok 27 16eb - Add mpls push action with label and bos ok 28 d69d - Add mpls push action with no label (invalid) ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid) ok 30 ecd0 - Add mpls push action with out of range label (invalid) ok 31 d303 - Add mpls push action with out of range tc (invalid) ok 32 fd6e - Add mpls push action with ttl of 0 (invalid) ok 33 19e9 - Add mpls mod action with mpls label ok 34 1fde - Add mpls mod action with max mpls label ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid) ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid) ok 37 57c9 - Add mpls mod action with mpls min tc ok 38 6872 - Add mpls mod action with mpls max tc ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid) ok 40 6ed5 - Add mpls mod action with mpls ttl ok 41 77c1 - Add mpls mod action with mpls ttl and cookie ok 42 b80f - Add mpls mod action with mpls max ttl ok 43 8864 - Add mpls mod action with mpls min ttl ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid) ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid) ok 46 451f - Add mpls mod action with mpls max bos ok 47 a1ed - Add mpls mod action with mpls min bos ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid) ok 49 db7c - Add mpls mod action with protocol (invalid) ok 50 b070 - Replace existing mpls push action with new ID ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie ok 52 6cce - Delete mpls pop action ok 53 d138 - Flush mpls actions Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Reviewed-by:
-
Pedro Tammela authored
The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action pedit ... index 1 tc filter add ... action pedit index 1 In the current code for act_pedit this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..69 ok 1 319a - Add pedit action that mangles IP TTL ok 2 7e67 - Replace pedit action with invalid goto chain ok 3 377e - Add pedit action with RAW_OP offset u32 ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID) ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16 ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID) ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value ok 8 2893 - Add pedit action with RAW_OP offset u8 quad ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8 ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8 ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID) ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID) ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID) ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID) ok 32 ab06 - Add pedit action with LAYERED_OP eth add type ok 33 918d - Add pedit action with LAYERED_OP eth invert src ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type ok 36 7588 - Add pedit action with LAYERED_OP ip set src ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID) ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence ok 49 438e - Add pedit action with LAYERED_OP ip clear tos ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence ok 51 824a - Add pedit action with LAYERED_OP ip invert tos ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID) ok 56 815c - Add pedit action with LAYERED_OP ip6 set src ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID) ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID) ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1 ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2 Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers") Fixes: f67169fe ("net/sched: act_pedit: fix WARN() in the traffic path") Reviewed-by:
-
Michal Schmidt authored
Even after commit 908d4bb7 ("qede: fix interrupt coalescing configuration"), some entries of the coal_entry array may theoretically be used uninitialized: 1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for coal_entry. The initial allocation uses kcalloc, so everything is initialized. 2. The user sets a small number of queues (ethtool -L). coal_entry is reallocated for the actual small number of queues. 3. The user sets a bigger number of queues. coal_entry is reallocated bigger. The added entries are not necessarily initialized. In practice, the reallocations will actually keep using the originally allocated region of memory, but we should not rely on it. The reallocation is unnecessary. coal_entry can always have QEDE_MAX_RSS_CNT entries. Fixes: 908d4bb7 ("qede: fix interrupt coalescing configuration") Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Nacked-by:
Manish Chopra <manishc@marvell.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahemeed says: ==================== mlx5 fixes 2023-02-24 V1->V2: - Toss away arguably non-fixes patches This series provides bug fixes for mlx5 driver. Please pull and let me know if there is any problem. ====================
-
Fedor Pchelkin authored
The callback context for sending/receiving APDUs to/from the selected secure element is allocated inside nfc_genl_se_io and supposed to be eventually freed in se_io_cb callback function. However, there are several error paths where the bwi_timer is not charged to call se_io_cb later, and the cb_context is leaked. The patch proposes to free the cb_context explicitly on those error paths. At the moment we can't simply check 'dev->ops->se_io()' return value as it may be negative in both cases: when the timer was charged and was not. Fixes: 5ce3f32b ("NFC: netlink: SE API implementation") Reported-by: syzbot+df64c0a2e8d68e78a4fa@syzkaller.appspotmail.com Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Jacob Keller authored
CONFIG_ICE_GNSS was added by commit c7ef8221 ("ice: use GNSS subsystem instead of TTY") as a way to allow the ice driver to optionally support GNSS features without forcing a dependency on CONFIG_GNSS. The original implementation of that commit at [1] used IS_REACHABLE. This was rejected by Olek at [2] with the suggested implementation of CONFIG_ICE_GNSS. Eventually after merging, Linus reported a .config which had CONFIG_ICE_GNSS = y when both GNSS = n and ICE = n. This confused him and he felt that the config option was not useful, and commented about it at [3]. CONFIG_ICE_GNSS is defined to y whenever GNSS = ICE. This results in it being set in cases where both options are not enabled. The goal of CONFIG_ICE_GNSS is to ensure that the GNSS support in the ice driver is enabled when GNSS is enabled. The complaint from Olek about the original IS_REACHABLE was due to the required IS_REACHABLE checks throughout the ice driver code and the fact that ice_gnss.c was compiled regardless of GNSS support. This can be fixed in the Makefile by using ice-$(CONFIG_GNSS) += ice_gnss.o In this case, if GNSS = m and ICE = y, we can result in some confusing behavior where GNSS support is not enabled because its not built in. See [4]. To disallow this, have CONFIG_ICE depend on GNSS || GNSS = n. This ensures that we cannot enable CONFIG_ICE as builtin while GNSS is a module. Drop CONFIG_ICE_GNSS, and replace the IS_ENABLED checks for it with checks for GNSS. Update the Makefile to add the ice_gnss.o object based on CONFIG_GNSS. This works to ensure that GNSS support can optionally be enabled, doesn't have an unnnecessary extra config option, and has Kbuild enforce the dependency such that you can't accidentally enable GNSS as a module and ICE as a builtin. [1] https://lore.kernel.org/intel-wired-lan/20221019095603.44825-1-arkadiusz.kubalewski@intel.com/ [2] https://lore.kernel.org/intel-wired-lan/20221028165706.96849-1-alexandr.lobakin@intel.com/ [3] https://lore.kernel.org/all/CAHk-=wi_410KZqHwF-WL5U7QYxnpHHHNP-3xL=g_y89XnKc-uw@mail.gmail.com/ [4] https://lore.kernel.org/netdev/20230223161309.0e439c5f@kernel.org/Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Fixes: c7ef8221 ("ice: use GNSS subsystem instead of TTY") Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Cc: Alexander Lobakin <alexandr.lobakin@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Anthony Nguyen <anthony.l.nguyen@intel.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Nathan Chancellor authored
When CONFIG_NET_CLS_ACT is disabled: ../net/sched/cls_api.c:141:13: warning: 'tcf_exts_miss_cookie_base_destroy' defined but not used [-Wunused-function] 141 | static void tcf_exts_miss_cookie_base_destroy(struct tcf_exts *exts) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Due to the way the code is structured, it is possible for a definition of tcf_exts_miss_cookie_base_destroy() to be present without actually being used. Its single callsite is in an '#ifdef CONFIG_NET_CLS_ACT' block but a definition will always be present in the file. The version of tcf_exts_miss_cookie_base_destroy() that actually does something depends on CONFIG_NET_TC_SKB_EXT, so the stub function is used in both CONFIG_NET_CLS_ACT=n and CONFIG_NET_CLS_ACT=y + CONFIG_NET_TC_SKB_EXT=n configurations. Move the call to tcf_exts_miss_cookie_base_destroy() in tcf_exts_destroy() out of the '#ifdef CONFIG_NET_CLS_ACT', so that it always appears used to the compiler, while not changing any behavior with any of the various configuration combinations. Fixes: 80cd22c3 ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
-
- 25 Feb, 2023 2 commits
-
-
Nick Child authored
When setting the XPS map value for TX queues, use the index of the transmit queue. Previously, the function was passing the index of the loop that iterates over all queues (RX and TX). This was causing invalid XPS map values. Fixes: 68315829 ("ibmvnic: Toggle between queue types in affinity mapping") Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230223153944.44969-1-nnac123@linux.ibm.comSigned-off-by:
-
nick black authored
Replace "sendpage" with "sendfile". Remove comment about ENOBUFS when the sockopt hasn't been set; experimentation indicates that this is not true. Signed-off-by:
nick black <dankamongmen@gmail.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/Y/gg/EhIIjugLdd3@schwarzgerat.orthancSigned-off-by:
-
- 24 Feb, 2023 15 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl-gen: fix glitches found by Chuck A handful of fixes Chuck run into while trying to define the family for crypto handshakes. ==================== Link: https://lore.kernel.org/r/20230223183141.1422857-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Python will generate its customary cache when running ynl scripts: ?? tools/net/ynl/lib/__pycache__/ Reported-by:
Chuck Lever III <chuck.lever@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
traceback.print_exception() seems tricky to call, we're missing some argument, so re-raise instead. Reported-by:
-
Jakub Kicinski authored
Chuck run into an issue with a single-element attr-set which only has an attr with value of 0. The search for max attr in a struct records attrs with value larger than 0 only (max_val is set to 0 at the start). Adjust the comparison, alternatively max_val could be init'ed to -1. Somehow picking the last attr of a value seems like a good idea in general. Reported-by:
-
Maor Dickman authored
On success, mlx5_geneve_tlv_option_create returns non negative Geneve object id. In case the object id is positive value the caller functions will handle it as an error (non zero) and will fail to offload the Geneve rule. Fix this by changing caller function ,mlx5_geneve_tlv_option_add, to return 0 in case valid non negative object id was provided. Fixes: 0ccc171e ("net/mlx5: Geneve, Manage Geneve TLV options") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Raed Salem <raeds@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
When adding send to vport rule verify flow_source matching is supported by checking the flow_source cap. Fixes: d0444254 ("net/mlx5: E-Switch, set flow source for send to uplink rule") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
-
Maher Sanalla authored
Currently, during the early stages of their unloading, particularly during SRIOV disablement, PFs/ECPFs wait on the release of all of their VFs memory pages. Furthermore, ECPFs are considered the page supplier for host VFs, hence the host VFs memory pages are freed only during ECPF cleanup when host interfaces get disabled. Thus, disabling SRIOV early in unload timeline causes the DPU ECPF to stall on driver unload while waiting on the release of host VF pages that won't be freed before host interfaces get disabled later on. Therefore, for ECPFs, wait on the release of VFs pages only after the disablement of host PFs during ECPF cleanup flow. Then, host PFs and VFs are disabled and their memory shall be freed accordingly. Fixes: 143a41d7 ("net/mlx5: Disable SRIOV before PF removal") Signed-off-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Vadim Fedorenko authored
Fifo indexes are not checked during pop operations and it leads to potential use-after-free when poping from empty queue. Such case was possible during re-sync action. WARN_ON_ONCE covers future cases. There were out-of-order cqe spotted which lead to drain of the queue and use-after-free because of lack of fifo pointers check. Special check and counter are added to avoid resync operation if SKB could not exist in the fifo because of OOO cqe (skb_id must be between consumer and producer index). Fixes: 58a51894 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Signed-off-by:
-
Vadim Fedorenko authored
During ptp resync operation SKBs were poped from the fifo but were never freed neither by napi_consume nor by dev_kfree_skb_any. Add call to napi_consume_skb to properly free SKBs. Another leak was happening because mlx5e_skb_fifo_has_room() had an error in the check. Comparing free running counters works well unless C promotes the types to something wider than the counter. In this case counters are u16 but the result of the substraction is promouted to int and it causes wrong result (negative value) of the check when producer have already overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue. Fixes: 58a51894 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Reviewed-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Yang Yingliang authored
kvzalloc() returns NULL pointer not PTR_ERR() when it fails, so replace the IS_ERR() check with NULL pointer check. Fixes: d13674b1 ("net/mlx5e: TC, map tc action cookie to a hw counter") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
Yang Li authored
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning： ./drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c:714:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by:Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4174Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Eric Dumazet authored
dev_kfree_skb() is aliased to consume_skb(). When a driver is dropping a packet by calling dev_kfree_skb_any() we should propagate the drop reason instead of pretending the packet was consumed. Note: Now we have enum skb_drop_reason we could remove enum skb_free_reason (for linux-6.4) v2: added an unlikely(), suggested by Yunsheng Lin. Fixes: e6247027 ("net: introduce dev_consume_skb_any()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Tariq Toukan authored
Fix a repeated copy/paste typo. Fixes: d3d854fd ("netdev-genl: create a simple family for netdev stuff") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Gal Pressman authored
Per the discussion in [1], hairpin parameters will be exposed using devlink, remove the debugfs files. [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/Signed-off-by:
-
Deepak R Varma authored
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name by ah_esp_hdr. Issue identified using doublebitand.cocci Coccinelle semantic patch. Fixes: b7cf9661 ("octeontx2-pf: Add flow classification using IP next level protocol") Link: https://lore.kernel.org/all/20210111112537.3277-1-naveenm@marvell.com/Signed-off-by:
Deepak R Varma <drv@mailo.com> Link: https://lore.kernel.org/r/Y/YYkKddeHOt80cO@ubun2204.myguest.virtualbox.orgSigned-off-by:
-
- 23 Feb, 2023 8 commits
-
-
Xin Long authored
With this refcnt added in sctp_stream_priorities, we don't need to traverse all streams to check if the prio is used by other streams when freeing one stream's prio in sctp_sched_prio_free_sid(). This can avoid a nested loop (up to 65535 * 65535), which may cause a stuck as Ying reported: watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136] Call Trace: <TASK> sctp_sched_prio_free_sid+0xab/0x100 [sctp] sctp_stream_free_ext+0x64/0xa0 [sctp] sctp_stream_free+0x31/0x50 [sctp] sctp_association_free+0xa5/0x200 [sctp] Note that it doesn't need to use refcount_t type for this counter, as its accessing is always protected under the sock lock. v1->v2: - add a check in sctp_sched_prio_set to avoid the possible prio_head refcnt overflow. Fixes: 9ed7bfc7 ("sctp: fix memory leak in sctp_stream_outq_migrate()") Reported-by:Ying Xu <yinxu@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.comSigned-off-by:
-
Sean Anderson authored
devm_request_region is for I/O regions. Use devm_request_mem_region instead. This fixes the driver failing to probe since 99df45c9 ("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the result. Fixes: 914d9b27 ("sunhme: switch to devres") Signed-off-by:
Sean Anderson <seanga2@gmail.com> Reviewed-by:
-
Geetha sowjanya authored
When checksum offload is disabled in the driver via ethtool, the PTP 1-step sync packets contain incorrect checksum, since the stack calculates the checksum before driver updates PTP timestamp field in the packet. This results in PTP packets getting dropped at the other end. This patch fixes the issue by re-calculating the UDP checksum after updating PTP timestamp field in the driver. Fixes: 2958d17a ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Link: https://lore.kernel.org/r/20230222113600.1965116-1-saikrishnag@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Oleksij Rempel says: ==================== net: phy: EEE fixes changes v3: - add kernel test robot tags to commit log - reword comment for genphy_c45_an_config_eee_aneg() function changes v2: - restore previous ethtool set logic for the case where advertisements are not provided by user space. - use ethtool_convert_legacy_u32_to_link_mode() where possible - genphy_c45_an_config_eee_aneg(): move adv initialization in to the if scope. Different EEE related fixes. ==================== Link: https://lore.kernel.org/r/20230222055043.113711-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Currently, it is possible to let some PHYs to advertise not supported EEE link modes. So, validate them before overwriting existing configuration. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Oleksij Rempel authored
With following patches: commit 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") commit 5827b168 ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") we set the advertisement to potentially supported values. This behavior may introduce new regressions on systems where EEE was disabled by default (BIOS or boot loader configuration or by other ways.) At same time, with this patches, we would overwrite EEE advertisement configuration made over ethtool. To avoid this issues, we need to cache initial and ethtool advertisement configuration and store it for later use. Fixes: 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Fixes: 5827b168 ("net: phy: c45: migrate to genphy_c45_write_eee_adv()") Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by:
-
Oleksij Rempel authored
Add new genphy_c45_an_config_eee_aneg() function and replace some of genphy_c45_write_eee_adv() calls. This will be needed by the next patch. Signed-off-by:
-
Oleksij Rempel authored
Make sure we use proper variable to validate access to potentially not supported registers. Otherwise we will get false read/write errors. Reported-by:
kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202302211644.c12d19de-yujie.liu@intel.com Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by:
-
