When VIRTIO_NET_F_GUEST_UFO is negotiated, host could still send UFO
packet that exceeds a single page which could not be handled
correctly by XDP. So this patch forbids setting XDP when GUEST_UFO is
supported. While at it, forbid XDP for ECN (which comes only from GRO)
too to prevent user from misconfiguration.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't update ewma rx buf size in the case of XDP. This will lead
underestimation of rx buf size which causes host to produce more than
one buffers. This will greatly increase the possibility of XDP page
linearization.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We drop csumed packet when do XDP for packets. This breaks
XDP_PASS when GUEST_CSUM is supported. Fix this by allowing csum flag
to be set. With this patch, simple TCP works for XDP_PASS.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When XDP_PASS were determined for linearized packets, we try to get
new buffers in the virtqueue and build skbs from them. This is wrong,
we should create skbs based on existed buffers instead. Fixing them by
creating skb based on xdp_page.

With this patch "ping 192.168.100.4 -s 3900 -M do" works for XDP_PASS.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't put page during linearizing, the would cause leaking when
xmit through XDP_TX or the packet exceeds PAGE_SIZE. Fix them by
put page accordingly. Also decrease the number of buffers during
linearizing to make sure caller can free buffers correctly when packet
exceeds PAGE_SIZE. With this patch, we won't get OOM after linearize
huge number of packets.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After we linearize page, we should xmit this page instead of the page
of first buffer which may lead unexpected result. With this patch, we
can see correct packet during XDP_TX.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we use EWMA to estimate the size of rx buffer. When rx buffer
size is underestimated, it's usual to have a packet with more than one
buffers. Consider this is not a bug, remove the warning and correct
the comment before XDP linearizing.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Router fixes

Ido says:

First two patches ensure we remove from the device's table neighbours
that are considered to be dead by the neighbour core.

The last patch removes nexthop groups from the device when they are no
longer valid.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

At the end of the nexthop initialization process we determine whether
the nexthop should be offloaded or not based on the NUD state of the
neighbour representing it. After all the nexthops were initialized we
refresh the nexthop group and potentially offload it to the device, in
case some of the nexthops were resolved.

Make the destruction of a nexthop group symmetric with its creation by
marking all nexthops as invalid and then refresh the nexthop group to
make sure it was removed from the device's tables.

Fixes: b2157149 ("mlxsw: spectrum_router: Add the nexthop neigh activity update")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a neighbour is considered to be dead, we should remove it from the
device's table regardless of its NUD state.

Without this patch, after setting a port to be administratively down we
get the following errors when we periodically try to update the kernel
about neighbours activity:

[  461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find
matching neighbour for IP=192.168.100.2

Fixes: a6bf9e93 ("mlxsw: spectrum_router: Offload neighbours based on NUD state change")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neigh_cleanup_and_release() is always called after marking a neighbour
as dead, but it only notifies user space and not in-kernel listeners of
the netevent notification chain.

This can cause multiple problems. In my specific use case, it causes the
listener (a switch driver capable of L3 offloads) to believe a neighbour
entry is still valid, and is thus erroneously kept in the device's
table.

Fix that by sending a netevent after marking the neighbour as dead.

Fixes: a6bf9e93 ("mlxsw: spectrum_router: Offload neighbours based on NUD state change")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By setting certain socket options on ipv6 raw sockets, we can confuse the
length calculation in rawv6_push_pending_frames triggering a BUG_ON.

RIP: 0010:[<ffffffff817c6390>] [<ffffffff817c6390>] rawv6_sendmsg+0xc30/0xc40
RSP: 0018:ffff881f6c4a7c18  EFLAGS: 00010282
RAX: 00000000fffffff2 RBX: ffff881f6c681680 RCX: 0000000000000002
RDX: ffff881f6c4a7cf8 RSI: 0000000000000030 RDI: ffff881fed0f6a00
RBP: ffff881f6c4a7da8 R08: 0000000000000000 R09: 0000000000000009
R10: ffff881fed0f6a00 R11: 0000000000000009 R12: 0000000000000030
R13: ffff881fed0f6a00 R14: ffff881fee39ba00 R15: ffff881fefa93a80

Call Trace:
 [<ffffffff8118ba23>] ? unmap_page_range+0x693/0x830
 [<ffffffff81772697>] inet_sendmsg+0x67/0xa0
 [<ffffffff816d93f8>] sock_sendmsg+0x38/0x50
 [<ffffffff816d982f>] SYSC_sendto+0xef/0x170
 [<ffffffff816da27e>] SyS_sendto+0xe/0x10
 [<ffffffff81002910>] do_syscall_64+0x50/0xa0
 [<ffffffff817f7cbc>] entry_SYSCALL64_slow_path+0x25/0x25

Handle by jumping to the failure path if skb_copy_bits gets an EFAULT.

Reproducer:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>

#define LEN 504

int main(int argc, char* argv[])
{
	int fd;
	int zero = 0;
	char buf[LEN];

	memset(buf, 0, LEN);

	fd = socket(AF_INET6, SOCK_RAW, 7);

	setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4);
	setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN);

	sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110);
}
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Socket cmsg IP(V6)_RECVORIGDSTADDR checks that port range lies within
the packet. For sockets that have transport headers pulled, transport
offset can be negative. Use signed comparison to avoid overflow.

Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing")
Reported-by: Nisar Jagabar <njagabar@cloudmark.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
net/sched fixes for cls_flower and act_tunnel_key

This small series contain a fix to the matching flags support
in flower and to the tunnel key action MD prep for IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When matching on flags, we should require the user to provide the
mask and avoid using an all-ones mask. Not doing so causes matching
on flags provided w.o mask to hit on the value being unset for all
flags, which may not what the user wanted to happen.

Fixes: faa3ffce ('net/sched: cls_flower: Add support for matching on flags')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The UDP dst port was provided to the helper function which sets the
IPv6 IP tunnel meta-data under a wrong param order, fix that.

Fixes: 75bfbca0 ('net/sched: act_tunnel_key: Add UDP dst port option')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.10

All small fixes this time, especially important are the regression
fixes for rtlwifi and ath9k.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e2d118a1 ("net: inet: Support UID-based routing in IP
protocols.") made ip_do_redirect call sock_net(sk) to determine
the network namespace of the passed-in socket. This crashes if sk
is NULL.

Fix this by getting the network namespace from the skb instead.

Fixes: e2d118a1 ("net: inet: Support UID-based routing in IP protocols.")
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix: Addresses should be printed using the %p format specifier
rather than using %x.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin reported crashes happening in tcp_tasklet_func() on powerpc64

Before TSQ_QUEUED bit is cleared, we must ensure the changes done
by list_del(&tp->tsq_node); are committed to memory, otherwise
corruption might happen, as an other cpu could catch TSQ_QUEUED
clearance too soon.

We can notice that old kernels were immune to this bug, because
TSQ_QUEUED was cleared after a bh_lock_sock(sk)/bh_unlock_sock(sk)
section, but they could have missed a kick to write additional bytes,
when NIC interrupts for a given flow are spread to multiple cpus.

Affected TCP flows would need an incoming ACK or RTO timer to add more
packets to the pipe. So overall situation should be better now.

Fixes: b223feb9 ("tcp: tsq: add shortcut in tcp_tasklet_func()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Madalin Bucur <madalin.bucur@nxp.com>
Tested-by: Madalin Bucur <madalin.bucur@nxp.com>
Tested-by: Xing Lei <xing.lei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 71ce391d ("net: mvpp2: enable proper per-CPU TX
buffers unmapping"), we are not correctly DMA unmapping TX buffers for
fragments.

Indeed, the mvpp2_txq_inc_put() function only stores in the
txq_cpu->tx_buffs[] array the physical address of the buffer to be
DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use
skb_headlen(skb) to get the size to be unmapped. Both of this works fine
for TX descriptors that are associated directly to a SKB, but not the
ones that are used for fragments, with a NULL pointer as skb:

 - We have a NULL physical address when calling DMA unmap
 - skb_headlen(skb) crashes because skb is NULL

This causes random crashes when fragments are used.

To solve this problem, we need to:

 - Store the physical address of the buffer to be unmapped
   unconditionally, regardless of whether it is tied to a SKB or not.

 - Store the length of the buffer to be unmapped, which requires a new
   field.

Instead of adding a third array to store the length of the buffer to be
unmapped, and as suggested by David Miller, this commit refactors the
tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a
separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is
added. Therefore, instead of having three arrays to allocate/free, we
have a single one, which also improve data locality, reducing the
impact on the CPU cache.

Fixes: 71ce391d ("net: mvpp2: enable proper per-CPU TX buffers unmapping")
Reported-by: Raphael G <raphael.glon@corp.ovh.com>
Cc: Raphael G <raphael.glon@corp.ovh.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Right now the dwmac-rk tries to set up the GRF-specific speed and link
options before enabling clocks, phys etc and on previous socs this works
because the GRF is supplied on the whole by one clock.

On the rk3399 however the GRF (General Register Files) clock-supply
has been split into multiple clocks and while there is no specific
grf-gmac clock like for other sub-blocks, it seems the mac-specific
portions are actually supplied by the general mac clock.

This results in hangs on rk3399 boards if the driver is build as module.
When built in te problem of course doesn't surface, as the clocks
are of course still on at the stage before clock_disable_unused.

To solve this, simply move the clock enablement to the first position
in the powerup callback. This is also a good idea in general to
enable clocks before everything else.

Tested on rk3288, rk3368 and rk3399 the dwmac still works on all of them.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver currently allocates 128 bytes of skb headroom.
This was found to be insufficient with some configurations
like Geneve tunnels, which resulted in skb head reallocations.

Increase the headroom to 256 bytes to fix this.
Signed-off-by: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit e4965614 {"rtlwifi: Use dev_kfree_skb_irq instead of
kfree_skb"), the method used to free an skb was changed because the
kfree_skb() was inside a spinlock. What was forgotten is that kfree_skb()
guards against a NULL value for the argument. Routine dev_kfree_skb_irq()
does not, and a test is needed to prevent kernel panics.

Fixes: e4965614 ("rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> # 4.9+
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Starting with commit d94a461d ("ath9k: use ieee80211_tx_status_noskb
where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on
returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls
and suspicious RCU usage:

 ===============================
 [ INFO: suspicious RCU usage. ]
 4.9.0-rc8 #11 Not tainted
 -------------------------------
 kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.!

 other info that might help us debug this:

 RCU used illegally from idle CPU!
 rcu_scheduler_active = 1, debug_locks = 0
 RCU used illegally from extended quiescent state!
 1 lock held by swapper/7/0:
 #0:
  (
 rcu_read_lock
 ){......}
 , at:
 [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k]

 stack backtrace:
 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11
 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013
  ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001
  ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8
  ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4
 Call Trace:
  <IRQ>
  [<ffffffff8132b1e5>] dump_stack+0x68/0x93
  [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110
  [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200
  [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0
  [<ffffffff81058631>] irq_exit+0x61/0xd0
  [<ffffffff81018d25>] do_IRQ+0x65/0x110
  [<ffffffff81672189>] common_interrupt+0x89/0x89
  <EOI>
  [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200
  [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20
  [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40
  [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220
  [<ffffffff810336f8>] start_secondary+0x148/0x170
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes: d94a461d ("ath9k: use ieee80211_tx_status_noskb where possible")
Cc: <stable@vger.kernel.org> # v4.9
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Pull networking fixes and cleanups from David Miller:

 1) Use rb_entry() instead of hardcoded container_of(), from Geliang
    Tang.

 2) Use correct memory barriers in stammac driver, from Pavel Machek.

 3) Fix assoc bind address handling in SCTP, from Xin Long.

 4) Make the length check for UFO handling consistent between
    __ip_append_data() and ip_finish_output(), from Zheng Li.

 5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
    Li.

 6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
    Yadav.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  RDS: use rb_entry()
  net_sched: sch_netem: use rb_entry()
  net_sched: sch_fq: use rb_entry()
  net/mlx5: use rb_entry()
  ethernet: sfc: Add Kconfig entry for vendor Solarflare
  sctp: not copying duplicate addrs to the assoc's bind address list
  sctp: reduce indent level in sctp_copy_local_addr_list
  ARM: dts: hix5hd2: don't change the existing compatible string
  net: hix5hd2_gmac: fix compatible strings name
  openvswitch: Add a missing break statement.
  net: netcp: ethss: fix 10gbe host port tx pri map configuration
  net: netcp: ethss: fix errors in ethtool ops
  fsl/fman: enable compilation on ARM64
  fsl/fman: A007273 only applies to PPC SoCs
  powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
  fsl/fman: fix 1G support for QSGMII interfaces
  dt: bindings: net: use boolean dt properties for eee broken modes
  net: phy: use boolean dt properties for eee broken modes
  net: phy: fix sign type error in genphy_config_eee_advert
  ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
  ...

Merge final set of updates from Andrew Morton:

 - a series to make IMA play better across kexec

 - a handful of random fixes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
  ratelimit: fix WARN_ON_RATELIMIT return value
  kcov: make kcov work properly with KASLR enabled
  arm64: setup: introduce kaslr_offset()
  mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
  ima: platform-independent hash value
  ima: define a canonical binary_runtime_measurements list format
  ima: support restoring multiple template formats
  ima: store the builtin/custom template definitions in a list
  ima: on soft reboot, save the measurement list
  powerpc: ima: send the kexec buffer to the next kernel
  ima: maintain memory size needed for serializing the measurement list
  ima: permit duplicate measurement list entries
  ima: on soft reboot, restore the measurement list
  powerpc: ima: get the kexec buffer passed by the previous kernel

Pull mailbox updates from Jassi Brar:

 - new features (poll and SRAM usage) added to the mailbox-test driver

 - major update of Broadcom's PDC controller driver

 - minor fix for auto-loading test and STI driver modules

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: mailbox-test: allow reserved areas in SRAM
  mailbox: mailbox-test: add support for fasync/poll
  mailbox: bcm-pdc: Remove unnecessary void* casts
  mailbox: bcm-pdc: Simplify interrupt handler logic
  mailbox: bcm-pdc: Performance improvements
  mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors
  mailbox: bcm-pdc: Convert from threaded IRQ to tasklet
  mailbox: bcm-pdc: Try to improve branch prediction
  mailbox: bcm-pdc: streamline rx code
  mailbox: bcm-pdc: Convert from interrupts to poll for tx done
  mailbox: bcm-pdc: PDC driver leaves debugfs files after removal
  mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted
  mailbox: bcm-pdc: Use octal permissions rather than symbolic
  mailbox: sti: Fix module autoload for OF registration
  mailbox: mailbox-test: Fix module autoload

Pull i2c fixes from Wolfram Sang.

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: mlxcpld: fix i2c mux selection caching
  i2c: designware: fix wrong Tx/Rx FIFO for ACPI
  i2c: xgene: Fix missing code of DTB support
  i2c: mux: pca954x: fix i2c mux selection caching
  i2c: octeon: thunderx: Limit register access retries

Pull documentation fix from Jonathan Corbet:
 "A single fix for the build system.

  It would appear that the docutils developers, in their wisdom, broke
  the API in the 0.13 release. This fix detects the breakage and allows
  the docs to be built with both the old and new versions"

* tag 'doc-4.10-3' of git://git.lwn.net/linux:
  docs: sphinx-extensions: make rstFlatTable work with docutils 0.13

Pull arch/microblaze updates from Michal Simek:

 - wire-up new syscalls

 - add new codes and fpga families

 - fix a return value

* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add new fpga families
  microblaze: Add missing release version code v9.6 and v10
  microblaze: Add missing syscalls
  microblaze: Fix return value from xilinx_timer_init

Pull Xtensa updates from Max Filippov:

 - enable HAVE_DMA_CONTIGUOUS, configure shared DMA pool reservation in
   kc705 DTS

 - update xtensa DMA-related Documentation/features entries

 - clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it,
   remove unused declarations, fix screen_info definition

* tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: update DMA-related Documentation/features entries
  xtensa: configure shared DMA pool reservation in kc705 DTS
  xtensa: enable HAVE_DMA_CONTIGUOUS
  xtensa: move S32C1I self-test to a separate file
  xtensa: fix screen_info, clean up unused declarations in setup.c

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit

  5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")

there are two drivers for Solarflare devices, but both still show up
directly beneath "Ethernet driver support" in the Kconfig. Follow the
pattern of other vendors and group them beneath an own vendor Kconfig
entry for Solarflare.

Cc: Edward Cree <ecree@solarflare.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: fix the issue that may copy duplicate addrs into assoc's bind address list

Patch 1/2 is to fix some indent level.

Given that we have kernels out there with this issue, patch 2/2 also
fix sctp_raw_to_bind_addrs.

v1 -> v2:
  Explain why we didn't filter the duplicate addresses when global
  address list gets updated in patch 2/2 changelog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp.local_addr_list is a global address list that is supposed to include
all the local addresses. sctp updates this list according to NETDEV_UP/
NETDEV_DOWN notifications.

However, if multiple NICs have the same address, the global list would
have duplicate addresses. Even if for one NIC, promote secondaries in
__inet_del_ifa can also lead to accumulating duplicate addresses.

When sctp binds address 'ANY' and creates a connection, it copies all
the addresses from global list into asoc's bind addr list, which makes
sctp pack the duplicate addresses into INIT/INIT_ACK packets.

This patch is to filter the duplicate addresses when copying the addrs
from global list in sctp_copy_local_addr_list and unpacking addr_param
from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list.

Note that we can't filter the duplicate addrs when global address list
gets updated, As NETDEV_DOWN event may remove an addr that still exists
in another NIC.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>