- 26 Nov, 2015 1 commit
-
-
Rasmus Villemoes authored
The code in hid_debug_event() causes horrible code generation. First, we do a strlen() call for every byte we copy (we're doing a store to global memory, so gcc has no way of proving that strlen(buf) doesn't change). Second, since both i, list->tail and HID_DEBUG_BUFSIZE have signed type, the modulo computation has to take into account the possibility that list->tail+i is negative, so it's not just a simple and. Fix the former by simply not doing strlen() at all (we have to load buf[i] anyway, so testing it is almost free) and the latter by changing i to unsigned. This cuts 29% (69 bytes) of the size of the function. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 23 Nov, 2015 1 commit
-
-
Oliver Neukum authored
If an event is discarded the device stays idle. Just reverse the order of check and marking busy. Found by code inspection. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 20 Nov, 2015 2 commits
-
-
Rasmus Villemoes authored
scnprintf() exists to provide these semantics, so we might as well use it. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Jiri Kosina authored
Benjamin has been helping a lot over time with reviewing patches flowing into HID subsystem. Let's make it official. Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 19 Nov, 2015 3 commits
-
-
Andy Lutomirski authored
Currently the sysfs report_descriptor attribute is only available if the device is claimed. We have the descriptor before we even create the device node, so just instantiate report_descriptor statically. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: "Two functional fixes for wacom HID driver from Ping Cheng and Jiri Kosina" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: fixup quirks setup for WACOM_DEVICETYPE_PAD HID: wacom: Add outbounding area for DTU1141
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.4 rc2. It's based on a commit prior rc1 as I wanted to get them a bit more tested in next before sending you the pull request. MMC core: - Improve reliability when selecting HS200 mode - Improve reliability when selecting HS400 mode - mmc: remove bondage between REQ_META and reliable write MMC host: - pxamci: Fix read-only gpio detection polarity - mtk-sd: Preinitialize delay_phase to fix the case when delay is zero - android-goldfish: Fix build dependency by adding HAS_DMA - dw_mmc: Remove Seungwon Jeon from MAINTAINERS" * tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: remove bondage between REQ_META and reliable write mmc: MMC_GOLDFISH should depend on HAS_DMA mmc: mediatek: Preinitialize delay_phase in get_best_delay() MAINTAINERS: mmc: Remove Seungwon Jeon from dw_mmc mmc: mmc: Improve reliability of mmc_select_hs400() mmc: mmc: Move mmc_switch_status() mmc: mmc: Fix HS setting in mmc_select_hs400() mmc: mmc: Improve reliability of mmc_select_hs200() mmc: pxamci: fix read-only gpio detection polarity
-
- 18 Nov, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix build issues in scpi and ina2xx drivers, update scpi driver to support recent firmware, and fix an uninitialized variable warning in applesmc driver" * tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (scpi) skip unsupported sensors properly hwmon: (scpi) add thermal-of dependency hwmon : (applesmc) Fix uninitialized variables warnings hwmon: (ina2xx) Fix build issue by selecting REGMAP_I2C
-
- 17 Nov, 2015 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix list tests in netfilter ingress support, from Florian Westphal. 2) Fix reversal of input and output interfaces in ingress hook invocation, from Pablo Neira Ayuso. 3) We have a use after free in r8169, caught by Dave Jones, fixed by Francois Romieu. 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa. 5) Three ipv6 route handling bug fixes from Martin KaFai Lau: a) Don't create clone routes not managed by the fib6 tree b) Don't forget to check expiration of DST_NOCACHE routes. c) Handle rt->dst.from == NULL properly. 6) Several AF_PACKET fixes wrt transport header setting and SKB protocol setting, from Daniel Borkmann. 7) Fix thunder driver crash on shutdown, from Pavel Fedin. 8) Several Mellanox driver fixes (max MTU calculations, use of correct DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich. 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for certain registers, etc.) from Neil Armstrong. 10) Make sure to disable preemption while updating per-cpu stats of ip tunnels, from Jason A. Donenfeld. 11) Various ARM64 bpf JIT fixes, from Yang Shi. 12) Flush icache properly in ARM JITs, from Daniel Borkmann. 13) Fix masking of RX and TX interrupts in ravb driver, from Masaru Nagai. 14) Fix netdev feature propagation for devices not implementing ->ndo_set_features(). From Nikolay Aleksandrov. 15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare. 16) RAW socket code increments incorrect SNMP counters, fix from Ben Cartwright-Cox. 17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman. 18) Fix handling of VLAN headers on stacked devices when REORDER is disabled. From Vlad Yasevich. 19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) MAINTAINERS: Update Mellanox's Eth NIC driver entries net/core: revert "net: fix __netdev_update_features return.." and add comment af_unix: take receive queue lock while appending new skb rtnetlink: fix frame size warning in rtnl_fill_ifinfo net: use skb_clone to avoid alloc_pages failure. packet: Use PAGE_ALIGNED macro packet: Don't check frames_per_block against negative values net: phy: Use interrupts when available in NOLINK state phy: marvell: Add support for 88E1540 PHY arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS macvlan: fix leak in macvlan_handle_frame ipvlan: fix use after free of skb ipvlan: fix leak in ipvlan_rcv_frame vlan: Do not put vlan headers back on bridge and macvlan ports vlan: Fix untag operations of stacked vlans with REORDER_HEADER off via-velocity: unconditionally drop frames with bad l2 length ipg: Remove ipg driver dl2k: Add support for IP1000A-based cards snmp: Remove duplicate OUTMCAST stat increment net: thunder: Check for driver data in nicvf_remove() ...
-
Or Gerlitz authored
Eugenia (Jenny) Emantayev is replacing Amir Vadai as the mlx4 Ethernet driver maintainer. Saeed Mahameed is assigned to maintain mlx5 Eth functionality. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This reverts commit 00ee5927 ("net: fix __netdev_update_features return on ndo_set_features failure") and adds a comment explaining why it's okay to return a value other than 0 upon error. Some drivers might actually change flags and return an error so it's better to fire a spurious notification rather than miss these. CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
While possibly in future we don't necessarily need to use sk_buff_head.lock this is a rather larger change, as it affects the af_unix fd garbage collector, diag and socket cleanups. This is too much for a stable patch. For the time being grab sk_buff_head.lock without disabling bh and irqs, so don't use locked skb_queue_tail. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Fix the following warning: CC net/core/rtnetlink.o net/core/rtnetlink.c: In function ‘rtnl_fill_ifinfo’: net/core/rtnetlink.c:1308:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ by splitting up the huge rtnl_fill_ifinfo into some smaller ones, so we don't have the huge frame allocations at the same time. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin Zhang authored
1. new skb only need dst and ip address(v4 or v6). 2. skb_copy may need high order pages, which is very rare on long running server. Signed-off-by:
Junwei Zhang <linggao.zjw@alibaba-inc.com> Signed-off-by:
Martin Zhang <martinbj2008@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Use PAGE_ALIGNED(...) instead of open-coding it. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
rb->frames_per_block is an unsigned int, thus can never be negative. Also fix spacing in the calculation of frames_per_block. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The NOLINK state will poll the phy once a second to see if the link has come up. If the phy has an interrupt line, this polling can be skipped, since the phy should interrupt when the link returns. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The 88E1540 can be found embedded in the Marvell 88E6352 switch. It is compatible with the 88E1510, so add support for it, using the 88E1510 specific functions. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yang Shi authored
Save and restore FP/LR in BPF prog prologue and epilogue, save SP to FP in prologue in order to get the correct stack backtrace. However, ARM64 JIT used FP (x29) as eBPF fp register, FP is subjected to change during function call so it may cause the BPF prog stack base address change too. Use x25 to replace FP as BPF stack base register (fp). Since x25 is callee saved register, so it will keep intact during function call. It is initialized in BPF prog prologue when BPF prog is started to run everytime. Save and restore x25/x26 in BPF prologue and epilogue to keep them intact for the outside of BPF. Actually, x26 is unnecessary, but SP requires 16 bytes alignment. So, the BPF stack layout looks like: high original A64_SP => 0:+-----+ BPF prologue |FP/LR| current A64_FP => -16:+-----+ | ... | callee saved registers +-----+ | | x25/x26 BPF fp register => -80:+-----+ | | | ... | BPF prog stack | | | | current A64_SP => +-----+ | | | ... | Function call stack | | +-----+ low CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
Reset pskb in macvlan_handle_frame in case skb_share_check returned a clone. Fixes: 8a4eb573 ("net: introduce rx_handler results and logic around that") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
ipvlan_handle_frame is a rx_handler, and when it returns a value other than RX_HANDLER_CONSUMED (here, NET_RX_DROP aka RX_HANDLER_ANOTHER), __netif_receive_skb_core expects that the skb still exists and will process it further, but we just freed it. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
Pass a **skb to ipvlan_rcv_frame so that if skb_share_check returns a new skb, we actually use it during further processing. It's safe to ignore the new skb in the ipvlan_xmit_* functions, because they call ipvlan_rcv_frame with local == true, so that dev_forward_skb is called and always takes ownership of the skb. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladislav Yasevich says: ==================== Fix issues with vlans without REORDER_HEADER A while ago Phil Sutter brought up an issue with vlans without REORDER_HEADER and bridges. The problem was that if a vlan without REORDER_HEADER was a port in the bridge, the bridge ended up forwarding corrupted packets that still contained the vlan header. The same issue exists for bridge mode macvlan/macvtap devices. An additional issue with vlans without REORDER_HEADER is that stacking them also doesn't work. The reason here is that skb_reorder_vlan_header() function assumes that it on ETH_HLEN bytes deep into the packet. That is not the case, when you a vlan without REORRDER_HEADER flag set. This series attempts to correct these 2 issues. 1) To solve the stacked vlans problem, the patch simply use skb->mac_len as an offset to start copying mac addresses that is part of header reordering. 2) To fix the issue with bridge/macvlan/macvtap, the second patch simply doesn't write the vlan header back to the packet if the vlan device is either a bridge or a macvlan port. This ends up being the simplest and least performance intrussive solution. I've considered extending patch 2 to all stacked devices (essentially checked for the presense of rx_handler), but that feels like a broader restriction and _may_ break existing uses. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
When a vlan is configured with REORDER_HEADER set to 0, the vlan header is put back into the packet and makes it appear that the vlan header is still there even after it's been processed. This posses a problem for bridge and macvlan ports. The packets passed to those device may be forwarded and at the time of the forward, vlan headers end up being unexpectedly present. With the patch, we make sure that we do not put the vlan header back (when REORDER_HEADER is 0) if a bridge or macvlan has been configured on top of the vlan device. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Timo Teräs authored
By default the driver allowed incorrect frames to be received. What is worse the code does not handle very short frames correctly. The FCS length is unconditionally subtracted, and the underflow can cause skb_put to be called with large number after implicit cast to unsigned. And indeed, an skb_over_panic() was observed with via-velocity. This removes the module parameter as it does not work in it's current state, and should be implemented via NETIF_F_RXALL if needed. Suggested-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A fs-cache regression fix, and adding a warning about obnoxiou^W moderation of list given in MAINTAINERS" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: MAINTAINERS: linux-cachefs@redhat.com is moderated for non-subscribers FS-Cache: Add missing initialization of ret in cachefiles_write_page()
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a bug in the qat driver where a user-space pointer is dereferenced" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - don't use userspace pointer
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Geert Uytterhoeven authored
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d90 ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 16 Nov, 2015 9 commits
-
-
Jiri Kosina authored
Given that INTUOSHT < BAMBOO_PT features->type >= INTUOSHT || features->type <= BAMBOO_PT condition is always true, and therefore device_type is under certain circumstances wrongly set with WACOM_DEVICETYPE_PAD bit set. Fix the condition so that it actually represents the range as intended. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Ondrej Zary authored
Now that IP1000A chips are supported by dl2k driver, the buggy ipg driver can be removed. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ondrej Zary authored
Add support for IP1000A chips to dl2k driver. IP1000A chip looks like a TC9020 with integrated PHY. This allows IP1000A chips to work reliably because the ipg driver is buggy - it loses packets under load and then completely stops transmitting data. Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps: vendor=0x13f0 device=0x1023 (rev 0x41) subsystem vendor=0x1043 device=0x8180 MAC address registers access needed to be changed from 8-bit to 16-bit because 8-bit does not work on IP1000A. 8-bit access is not even allowed in the TC9020 datasheet (although it worked). 16-bit access works on both. Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably a rebranded TC9020): vendor=0x1186 device=0x4000 (rev 0x0c) subsystem vendor=0x1186 device=0x4000 Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
the OUTMCAST stat is double incremented, getting bumped once in the mcast code itself, and again in the common ip output path. Remove the mcast bump, as its not needed Validated by the reporter, with good results Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Claus Jensen <claus.jensen@microsemi.com> CC: Claus Jensen <claus.jensen@microsemi.com> CC: David Miller <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Fedin authored
In some cases the crash is caused by nicvf_remove() being called from outside. For example, if we try to feed the device to vfio after the probe has failed for some reason. So, move the check to better place. Signed-off-by:
Pavel Fedin <p.fedin@samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
A recent flaw in the netdev feature setting resulted in warnings like this one from VLAN interfaces: WARNING: CPU: 1 PID: 4975 at net/core/dev.c:2419 skb_warn_bad_offload+0xbc/0xcb() : caps=(0x00000000001b5820, 0x00000000001b5829) len=2782 data_len=0 gso_size=1348 gso_type=16 ip_summed=3 The ":" is supposed to be preceded by a driver name, but in this case it is an empty string since the device has no parent. There are many types of network devices without a parent. The anonymous warnings for these devices can be hard to debug. Log the network device name instead in these cases to assist further debugging. This is mostly similar to how __netdev_printk() handles orphan devices. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
In case multiple writes to a unix stream socket race we could end up in a situation where we pre-allocate a new skb for use in unix_stream_sendpage but have to free it again in the locked section because another skb has been appended meanwhile, which we must use. Accidentally we didn't clear the pointer after consuming it and so we touched freed memory while appending it to the sk_receive_queue. So, clear the pointer after consuming the skb. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dragos Tatulea authored
rtnl_fdb_dump always expects an index to be returned by the ndo_fdb_dump op, but when CONFIG_NET_SWITCHDEV is off, it returns an error. Fix that by returning the given unmodified idx. A similar fix was 0890cf6c ("switchdev: fix return value of switchdev_port_fdb_dump in case of error") but for the CONFIG_NET_SWITCHDEV=y case. Fixes: 45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.") Signed-off-by:
Dragos Tatulea <dragos@endocode.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Commit 05cc5a39 "bnx2x: add vlan filtering offload" introduced a regression in regard for vlans for 57710, 57711 adapters - Loading 8021q module on a machine with such an adapter would cause a null pointer dereference, as the driver mistakenly publishes it has capabilities for vlan CTAG filtering. Reported-by:
Otto Sabart <osabart@redhat.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-