- 12 Jun, 2024 4 commits
-
-
Dmitry Baryshkov authored
Merge drm-misc-next tree into the msm-next tree in order to be able to use HDMI connector framework for the MSM HDMI driver.
-
Dmitry Baryshkov authored
In order to let bridge chains implement HDMI connector infrastructure, add necessary glue code to the drm_bridge_connector. In case there is a bridge that sets DRM_BRIDGE_OP_HDMI, drm_bridge_connector will register itself as a HDMI connector and provide proxy drm_connector_hdmi_funcs implementation. Note, to simplify implementation, there can be only one bridge in a chain that sets DRM_BRIDGE_OP_HDMI. Setting more than one is considered an error. This limitation can be lifted later, if the need arises. Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-3-ab384e6021af@linaro.orgSigned-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-
Dmitry Baryshkov authored
Turn drm_bridge_connector to using drmm_kzalloc() and drmm_connector_init() and drop the custom destroy function. The drm_connector_unregister() and fwnode_handle_put() are already handled by the drm_connector_cleanup() and so are safe to be dropped. Acked-by:
-
Dmitry Baryshkov authored
Add drm_atomic_helper_connector_hdmi_disable_audio_infoframe(), an API to allow the driver disable sending the Audio Infoframe. This is to be used by the drivers if setup of the infoframes is not tightly coupled with the audio functionality and just disabling the audio playback doesn't stop the HDMI hardware from sending the Infoframe. Acked-by:
-
- 11 Jun, 2024 23 commits
-
-
Douglas Anderson authored
Now that most panels have been updated not to track/double-check their prepared/enabled state update the TODO with next steps. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeidSigned-off-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. The IMX driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. The conversion of the rm67191 panel driver follows many of the other panel drivers but has a few differences that need to be called out. Like in commit 1e0465eb ("drm/panel: otm8009a: Don't double check prepared/enabled"), this panel also uses the "prepared" flag to prevent the backlight functions from running when the panel is powered off. This is probably not the safest thing to do but the old behavior was preserved. See the discussion in the otm8009a patch. Because of this, I've left the driver tracking "prepared" but removed its tracking of "enabled". NOTE: as part of this, transition the panel's direct calls to its disable/unprepare functions in shutdown to call through DRM panel. Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Tegra boards. The Tegra driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. As far as I can tell, all IMX boards are now correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. NOTE: as part of this, transition the panel's direct calls to its disable function in shutdown/remove to call through DRM panel. Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by TI OMAP boards. The OMAP driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.orgAcked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Jacobe Zang <jacobe.zang@wesion.com> Cc: Nicolas Belin <nbelin@baylibre.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Jacobe Zang <jacobe.zang@wesion.com> Cc: Nicolas Belin <nbelin@baylibre.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Jerry Han <jerry.han.hq@gmail.com> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock Wang <rock_wang@himax.com.cn> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. NOTE: as part of this, transition the panel's direct calls to its disable/unprepare functions in shutdown/remove to call through DRM panel. Cc: Jerry Han <jerry.han.hq@gmail.com> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock Wang <rock_wang@himax.com.cn> Acked-by:
-
- 10 Jun, 2024 13 commits
-
-
Kuro Chung authored
The spec of timing between IVDD/OVDD and SYSRTEN is 10ms, but SYSRSTN RC circuit need at least 25ms for rising time, update for match spec Signed-off-by:
Kuro Chung <kuro.chung@ite.com.tw> Signed-off-by:
Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Adam Ford authored
The VFP, HBP, and HSA are divided between the available lanes if there is more than one lane. For certain timings and lane configurations, the HFP may not be evenly divisible. If the HFP is rounded down, it ends up being too small which can cause some monitors to not sync properly. In these instances, adjust htotal and hsync to round the HFP up, and recalculate the htotal. This allows 720P-60 to operation on an i.MX8MP with a four-lane configuration. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM with HDMI monitor Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Adam Ford authored
The P divider should be set based on the min and max values of the fin pll which may vary between different platforms. These ranges are defined per platform, but hard-coded values were used instead which resulted in a smaller range available on the i.MX8M[MNP] than what was possible. As noted by Frieder, there are descripencies between the reference manuals of the Mini, Nano and Plus, so I reached out to my NXP rep and got the following response regarding the varing notes in the documentation. "Yes it is definitely wrong, the one that is part of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P, PMS_M and PMS_S is not correct. I will report this to Doc team, the one customer should be take into account is the Table 13-40 DPHY PLL Parameters and the Note above." With this patch, the clock rates now match the values used in NXP's downstream kernel. Fixes: 84630718 ("drm/bridge: samsung-dsim: update PLL reference clock") Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by:
Marek Vasut <marex@denx.de> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Vasut authored
Make sure the connector is fully initialized before signalling any HPD events via drm_kms_helper_hotplug_event(), otherwise this may lead to NULL pointer dereference. Signed-off-by:
-
Marek Vasut authored
Fix comment copy-paste error in tc_edp_mode_valid(), this function is validating DP/eDP clock, not DPI clock frequency. Update the comment to match. No functional change. Signed-off-by:
-
Sam Ravnborg authored
There are no users left of drm_bridge_chain_mode_fixup() and we do not want to have this function available, so drop it. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Sam Ravnborg authored
The mode_valid implementation had a call to drm_bridge_chain_mode_fixup() which would be wrong as the mode_valid is not allowed to change anything - only to validate the mode. As the next bridge is often/always a connector the call had no effect anyway. So drop it. From the git history I could see this call was included in the original version of the driver so there was no help there to find out why it was added in the first place. But a lot has changed since the initial driver were added and is seems safe to remove the call now. v4: - Link to v3: https://lore.kernel.org/dri-devel/20220717174454.46616-4-sam@ravnborg.org/ - Rebase, and added acks/rb v3: - Link to v2: https://lore.kernel.org/dri-devel/20211020181901.2114645-6-sam@ravnborg.org/ v2: - Link to v1: https://lore.kernel.org/dri-devel/20210722062246.2512666-6-sam@ravnborg.org/Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Jocelyn Falempe authored
Add a kmsg option, which will display the last lines of kmsg, and should be similar to fbcon. Add a drm.panic_screen module parameter, so you can choose between the different panic screens available. two options currently, but more will be added later: * "user": a short message telling the user to reboot the machine. * "kmsg": fill the screen with the last lines of kmsg. You can even change it at runtime by writing to /sys/module/drm/parameters/panic_screen v2: * Use module parameter instead of Kconfig choice (Javier Martinez Canillas) v3: * Add help for module parameter usage in Kconfig (Javier Martivez Canillas) * Fix use of font->height before checking it isn't null. (kernel test robot, Dan Carpenter) Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603095343.39588-4-jfalempe@redhat.com
-
Jocelyn Falempe authored
This allows drivers to draw the pixel, and handle tiling, or specific color formats. v2: * Use fg_color for blit() functions (Javier Martinez Canillas) Signed-off-by:
-
Jocelyn Falempe authored
The whole framebuffer is cleared, so it's useless to rewrite the background colored pixels. It allows to simplify the drawing functions, and prepare the work for the set_pixel() callback. v2: * keep fg16/fg24/fg32 as variable name for the blit function. * add drm_panic_is_pixel_fg() to avoid code duplication. both suggested by Javier Martinez Canillas Signed-off-by:
-
Ondrej Jirman authored
Identical configurations of planes can lead to different (and wrong) layer -> pipe routing at HW level, depending on the order of atomic plane changes. For example: - Layer 1 is configured to zpos 0 and thus uses pipe 0. No other layer is enabled. This is a typical situation at boot. - When a compositor takes over and layer 3 is enabled, sun8i_ui_layer_enable() will get called with old_zpos=0 zpos=1, which will lead to incorrect disabling of pipe 0 and enabling of pipe 1. What happens is that sun8i_ui_layer_enable() function may disable blender pipes even if it is no longer assigned to its layer. To correct this, move the routing setup out of individual plane's atomic_update into crtc's atomic_update, where it can be calculated and updated all at once. Remove the atomic_disable callback because it is no longer needed. Signed-off-by:
Ondrej Jirman <megi@xff.cz> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240224150604.3855534-4-megi@xff.czSigned-off-by:
-
Ondrej Jirman authored
These will be needed later on when we move layer configuration to crtc update. Signed-off-by:
-
Ondrej Jirman authored
These structs are identical, use a single struct to represent private data for the DRM plane. This is a preparation for configuring layer routing from the CRTC (mixer) instead of current approach of setting up routing from individual layer's atomic_update callback. Signed-off-by:
-
