- 22 Mar, 2022 5 commits
-
-
Michael Cheng authored
Use drm_clflush_virt_range instead of directly invoking clflush. This will prevent compiler errors when building for non-x86 architectures. v2(Michael Cheng): Remove extra clflush v3(Michael Cheng): Remove memory barrier since drm_clflush_virt_range takes care of it. v4(Michael Cheng): Get the size of value and not the size of the pointer when passing in execlists->csb_write. Thanks to Matt Roper for pointing this out. Signed-off-by:
Michael Cheng <michael.cheng@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Michael Cheng authored
Drop invalidate_csb_entries and directly call drm_clflush_virt_range. This allows for one less function call, and prevent complier errors when building for non-x86 architectures. v2(Michael Cheng): Drop invalidate_csb_entries function and directly invoke drm_clflush_virt_range. Thanks to Tvrtko for the sugguestion. v3(Michael Cheng): Use correct parameters for drm_clflush_virt_range. Thanks to Tvrtko for pointing this out. v4(Michael Cheng): Simplify &execlists->csb_status[0] to execlists->csb_status. Thanks to Matt Roper for the suggestion. Signed-off-by:
-
Michael Cheng authored
Re-work intel_write_status_page to use drm_clflush_virt_range. This will prevent compiler errors when building for non-x86 architectures. Signed-off-by:
-
Jani Nikula authored
The initialization is there only to silence the compiler, but use the correct initializer for i915_reg_t. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135955.922791-1-jani.nikula@intel.com
-
Andi Shyti authored
Change functions that always return '0' to be void type. Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321122759.227091-1-andi.shyti@linux.intel.com
-
- 21 Mar, 2022 8 commits
-
-
Vivek Kasireddy authored
On platforms capable of allowing 8K (7680 x 4320) modes, pinning 2 or more framebuffers/scanout buffers results in only one that is mappable/ fenceable. Therefore, pageflipping between these 2 FBs where only one is mappable/fenceable creates latencies large enough to miss alternate vblanks thereby producing less optimal framerate. This mainly happens because when i915_gem_object_pin_to_display_plane() is called to pin one of the FB objs, the associated vma is identified as misplaced -- because there is no space for it in the aperture -- and therefore i915_vma_unbind() is called which unbinds and evicts it. This misplaced vma gets subseqently pinned only when i915_gem_object_ggtt_pin_ww() is called without PIN_MAPPABLE. This whole thing results in a latency of ~10ms and happens every other repaint cycle. Therefore, to fix this issue, we just ensure that the misplaced VMA does not get evicted when we try to pin it with PIN_MAPPABLE -- by returning early if the mappable/fenceable flag is not set. Testcase: Running Weston and weston-simple-egl on an Alderlake_S (ADLS) platform with a 8K@60 mode results in only ~40 FPS (compared to ~59 FPS with this patch). Since upstream Weston submits a frame ~7ms before the next vblank, the latencies seen between atomic commit and flip event are 7, 24 (7 + 16.66), 7, 24..... suggesting that it misses the vblank every other frame. Here is the ftrace snippet that shows the source of the ~10ms latency: i915_gem_object_pin_to_display_plane() { 0.102 us | i915_gem_object_set_cache_level(); i915_gem_object_ggtt_pin_ww() { 0.390 us | i915_vma_instance(); 0.178 us | i915_vma_misplaced(); i915_vma_unbind() { __i915_active_wait() { 0.082 us | i915_active_acquire_if_busy(); 0.475 us | } intel_runtime_pm_get() { 0.087 us | intel_runtime_pm_acquire(); 0.259 us | } __i915_active_wait() { 0.085 us | i915_active_acquire_if_busy(); 0.240 us | } __i915_vma_evict() { ggtt_unbind_vma() { gen8_ggtt_clear_range() { 10507.255 us | } 10507.689 us | } 10508.516 us | } v2: - Expand the code comments to describe the ping-pong issue. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
-
Sujaritha Sundaresan authored
Throttling here refers to the GT frequency being clipped. Each of the throttle reason attributes will have a 0 or 1 value depending upon whether there is throttling and also the specific reason for it. The following is a brief description of the sysfs throttle frequency attributes added: - throttle_reason_status: when set indicates that there is GT frequency clipping. - throttle_reason_pl1: when set indicates that PBM PL1 (platform or package PL1) has caused GT frequency clipping. - throttle_reason_pl2: when set indicates that PBM PL2 or PL3 (platform or package PL2 or PL3) has caused GT frequency clipping. - throttle_reason_pl4: when set indicates that PL4 or IccMax has caused GT frequency clipping. - throttle_reason_thermal: when set indicates that Thermal event has caused GT frequency clipping. - throttle_reason_prochot: when set indicates that PROCHOT# has caused GT frequency clipping. - throttle_reason_ratl: when set indicates that Running Average Thermal Limit has caused GT frequency clipping. - throttle_reason_vr_thermalert: when set indicates that Hot VR (any processor VR) has caused GT frequency clipping. - throttle_reason_vr_tdc: when set indicates that VR TDC (Thermal Design Current) has caused GT frequency clipping. Signed-off-by:
Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Andi Shyti authored
Now tiles have their own sysfs interfaces under the gt/ directory. Because RPS is a property that can be configured on a tile basis, then each tile should have its own interface The new sysfs structure will have a similar layout for the 4 tile case: /sys/.../card0 ├── gt │ ├── gt0 │ │ ├── id │ │ ├── rc6_enable │ │ ├── rc6_residency_ms │ │ ├── rps_act_freq_mhz │ │ ├── rps_boost_freq_mhz │ │ ├── rps_cur_freq_mhz │ │ ├── rps_max_freq_mhz │ │ ├── rps_min_freq_mhz │ │ ├── rps_RP0_freq_mhz │ │ ├── rps_RP1_freq_mhz │ │ └── rps_RPn_freq_mhz . . . . . . │ └── gtN │ ├── id │ ├── rc6_enable │ ├── rc6_residency_ms │ ├── rps_act_freq_mhz │ ├── rps_boost_freq_mhz │ ├── rps_cur_freq_mhz │ ├── rps_max_freq_mhz │ ├── rps_min_freq_mhz │ ├── rps_RP0_freq_mhz │ ├── rps_RP1_freq_mhz │ └── rps_RPn_freq_mhz ├── gt_act_freq_mhz -+ ├── gt_boost_freq_mhz | ├── gt_cur_freq_mhz | Original interface ├── gt_max_freq_mhz +─-> kept as existing ABI; ├── gt_min_freq_mhz | it points to gt0/ ├── gt_RP0_freq_mhz | ├── gt_RP1_freq_mhz | └── gt_RPn_freq_mhz -+ The existing interfaces have been kept in their original location to preserve the existing ABI. They act on all the GTs: when writing they loop through all the GTs and write the information on each interface. When reading they provide the average value from all the GTs. This patch is not really adding exposing new interfaces (new ABI) other than adapting the existing one to more tiles. In any case this new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Andi Shyti authored
Now tiles have their own sysfs interfaces under the gt/ directory. Because RC6 is a property that can be configured on a tile basis, then each tile should have its own interface The new sysfs structure will have a similar layout for the 4 tile case: /sys/.../card0 ├── gt │ ├── gt0 │ │ ├── id │ │ ├── rc6_enable │ │ ├── rc6_residency_ms . . . . . . . . │ └── gtN │ ├── id │ ├── rc6_enable │ ├── rc6_residency_ms │ . │ . │ └── power/ -+ ├── rc6_enable | Original interface ├── rc6_residency_ms +-> kept as existing ABI; . | it multiplexes over . | the GTs -+ The existing interfaces have been kept in their original location to preserve the existing ABI. They act on all the GTs: when reading they provide the average value from all the GTs. This patch is not really adding exposing new interfaces (new ABI) other than adapting the existing one to more tiles. In any case this new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Andi Shyti authored
Now that we have tiles we want each of them to have its own interface. A directory "gt/" is created under "cardN/" that will contain as many diroctories as the tiles. In the coming patches tile related interfaces will be added. For now the sysfs gt structure simply has an id interface related to the current tile count. The directory structure will follow this scheme: /sys/.../card0 └── gt ├── gt0 │ └── id : : └─- gtN └── id This new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Tvrtko Ursulin authored
On a multi-tile platform, each tile has its own registers + GGTT space, and BAR 0 is extended to cover all of them. Up to four GTs are supported in i915->gt[], with slot zero shadowing the existing i915->gt0 to enable source compatibility with legacy driver paths. A for_each_gt macro is added to iterate over the GTs and will be used by upcoming patches that convert various parts of the driver to be multi-gt aware. Only the primary/root tile is initialized for now; the other tiles will be detected and plugged in by future patches once the necessary infrastructure is in place to handle them. Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@gmail.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Andi Shyti authored
The "gt_is_root(struct intel_gt *gt)" helper return true if the gt is the root gt, which means that its id is 0. Return false otherwise. Suggested-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Andi Shyti authored
With the upcoming multitile support each tile will have its own local memory. Mark the current LMEM with the suffix '0' to emphasise that it belongs to the root tile. Suggested-by:
-
- 18 Mar, 2022 5 commits
-
-
Matthew Brost authored
Add logical mapping for VDBOXs. This mapping is required for split-frame workloads, which otherwise fail with 00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK ... if the application is using the logical id to reorder the engines and then using it for the batch buffer submission. It's not a big problem on media version 11 and 12 as they have only 2 instances of VCS and the logical to physical mapping is monotonically increasing - if the application is not using the logical id. Changing it for the previous platforms allows the media driver implementation for the next ones (12.50 and above) to be the same, checking the logical id. It should also not introduce any bug for the old versions of userspace not checking the id. The mapping added here is the complete map needed by XEHPSDV. Previous platforms with only 2 instances will just use a partial map and should still work. v2: Remove static from map variable (José) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> [ Extend the mapping to media versions 11 and 12 and give proper justification in the commit message why ] Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Earlier versions of commit a5b7ef27 ("drm/i915: Add struct to hold IP version") named "ver" as "arch" and then when it was renamed it missed the rename on MEDIA_VER_FULL() since it it's currently not used. Fixes: a5b7ef27 ("drm/i915: Add struct to hold IP version") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
Starting with DG2, preemption can no longer be controlled using userspace on a per-context basis. Instead, the hardware only allows us to enable or disable preemption in a global, system-wide basis. Also, we lose the ability to specify the preemption granularity (such as batch-level vs command-level vs object-level). v2 (MattR): - Move debugfs interface to a separate patch. (Jani) v3 (MattR): - Drop the debugfs support completely for now. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318021051.2073847-1-matthew.d.roper@intel.com
-
Rodrigo Vivi authored
In this interface i915 is returning a blob of data which it receives from the guc software. This blob provides some useful data about the hardware for drivers. The format of this blob will be documented in the Programmer Reference Manuals when released. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kenneth Graunke <kenneth.w.graunke@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Slawomir Milczarek <slawomir.milczarek@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Jordan Justen <jordan.l.justen@intel.com> Tested-by:
Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by:
-
John Harrison authored
Implement support for fetching the hardware description table from the GuC. The call is made twice - once without a destination buffer to query the size and then a second time to fill in the buffer. The table is stored in the GT structure so that it can be fetched once at driver load time. Keeping inside a GuC structure would mean it would be release and reloaded on a GuC reset (part of a full GT reset). However, the table does not change just because the GT has been reset and the GuC reloaded. Also, dynamic memory allocations inside the reset path are a problem. Note that the table is only available on ADL-P and later platforms. v2 (John's v2 patch): * Move to GT level to avoid memory allocation during reset path (and unnecessary re-read of the table on a reset). v5 (of Jordan's posting): * Various changes made by Jordan and recommended by Michal - Makefile ordering - Adjust "struct intel_guc_hwconfig hwconfig" comment - Set Copyright year to 2022 in intel_guc_hwconfig.c/.h - Drop inline from hwconfig_to_guc() - Replace hwconfig param with guc in __guc_action_get_hwconfig() - Move zero size check into guc_hwconfig_discover_size() - Change comment to say zero size offset/size is needed to get size - Add has_guc_hwconfig to devinfo and drop has_table() - Change drm_err to notice in __uc_init_hw() and use %pe v6 (of Jordan's posting): * Added a couple more small changes recommended by Michal * Merge in John's v2 patch, but note: - Using drm_notice as recommended by Michal - Reverted Michal's suggestion of using devinfo v7 (of Jordan's posting): * Change back to drm_err as preferred by John Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
- 16 Mar, 2022 10 commits
-
-
Matthew Auld authored
On integrated it looks like the GGTT base should always 1:1 maps to somewhere within DSM. On discrete the base seems to be pre-programmed with a normal lmem address, and is not 1:1 mapped with the base address. On such devices probe the lmem address directly from the PTE. v2(Ville): - The base is actually the pre-programmed GGTT address, which is then meant to 1:1 map to somewhere inside dsm. In the case of dgpu the base looks to just be some offset within lmem, but this also happens to be the exact dsm start, on dg1. Therefore we should only need to fudge the physical address, before allocating from stolen. - Bail if it's not located in dsm. v3: - Scratch that. There doesn't seem to be any relationship with the base and PTE address, on at least DG1. Let's instead just grab the lmem address from the PTE itself. Signed-off-by:Nirmoy Das <nirmoy.das@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-7-matthew.auld@intel.com
-
CQ Tang authored
When system does not have mappable aperture, ggtt->mappable_end=0. In this case if we pass PIN_MAPPABLE when pinning vma, the pinning code will return -ENOSPC. So conditionally set PIN_MAPPABLE if HAS_GMCH(). Suggested-by:
Chris P Wilson <chris.p.wilson@intel.com> Signed-off-by:
CQ Tang <cq.tang@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ap Kamal <kamal.ap@intel.com> Reviewed-by:
-
Matthew Auld authored
For the ttm backend we can use existing placements fpfn and lpfn to force the allocator to place the object at the requested offset, potentially evicting stuff if the spot is currently occupied. Signed-off-by:
-
Matthew Auld authored
Add a generic interface for allocating an object at some specific offset, and convert stolen over. Later we will want to hook this up to different backends. Signed-off-by:
-
Matthew Auld authored
Keep the behaviour consistent with normal lmem, where we assume CPU access if by default required. Signed-off-by:
-
Akeem G Abodunrin authored
On client platforms with reduced LMEM BAR, we should be able to continue with driver load with reduced io_size. Instead of using the BAR size to determine the how large stolen should be, we should instead use the ADDR_RANGE register to figure this out(at least on platforms like DG2). For simplicity we don't attempt to support partially mappable stolen. v2: rearrange the io_mapping_init_wc slightly, since the stolen setup might result in reduced io_size. Signed-off-by:
-
Matthew Auld authored
Just pass along the probed io_size. The backend should be able to utilize the entire range here, even if some of it is non-mappable. It does leave open with what to do with stolen local-memory. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
-
Matt Roper authored
Upcoming patches will need to steer writes to multicast registers as well as reading them. Although the setting of the 'multicast' bit should only really matter for write operations (reads always operate in a unicast manner and give us the result from one specific instance), Wa_22013088509 suggests that we leave the multicast bit enabled when performing read operations, so we follow suit here. Cc: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
GuC has its own steering mechanism and can't use the default set by i915, so we need to provide the steering information that the FW will need to save/restore registers while processing an engine reset. The GUC interface allows us to do so as part of the register save/restore list and it requires us to specify the steering for all multicast register, even those that would be covered by the default setting for cpu access. Given that we do not distinguish between registers that do not need steering and registers that are guaranteed to work the default steering, we set the steering for all entries in the guc list that do not require a special steering (e.g. mslice) to the default settings; this will cost us a few extra writes during engine reset but allows us to keep the steering logic simple. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Add a new 'steering' node in each gt's debugfs directory that tells whether we're using explicit steering for various types of MCR ranges and, if so, what MMIO ranges it applies to. We're going to be transitioning away from implicit steering, even for slice/dss steering soon, so the information reported here will become increasingly valuable once that happens. v2: - Adding missing 'static' on intel_steering_types[] (Jose, sparse) v3: - "static const char *" -> "static const char * const" (sparse) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
- 15 Mar, 2022 1 commit
-
-
John Harrison authored
sseu_dev_info is already a pretty large structure which will likely continue to grow when future platforms increase potential DSS and EU counts. Let's switch the stack placement of this structure in debugfs with a dynamic allocation. Signed-off-by:
-
- 14 Mar, 2022 2 commits
-
-
Matt Roper authored
When running on Xe_HP or beyond, let's use an updated format for describing topology in our error state dumps and debugfs to give a more accurate view of the hardware: - Just report DSS directly without the legacy "slice0" output that's no longer meaningful. - Indicate whether each DSS is accessible for geometry and/or compute. - Rename "rcs_topology" to "sseu_topology" since the information reported is common to both RCS and CCS engines now. v2: - Name static functions in a more consistent manner. (Lucas) Signed-off-by:
-
Matt Roper authored
Xe_HP removed "slice" as a first-class unit in the hardware design. Instead we now have a single pool of subslices (which are now referred to as "DSS") that different hardware units have different ways of grouping ("compute slices," "geometry slices," etc.). For the purposes of topology representation, we treat Xe_HP-based platforms as having a single slice that contains all of the platform's DSS. There's no need to allocate storage space for (max legacy slices * max dss); let's update some of our macros to minimize the storage requirement for sseu topology. We'll also document some of the constants to make it a little bit more clear what they represent. v2: - s/LEGACY/HSW/ in macro names. (Lucas) - Rename MAX() to SSEU_MAX() to avoid any potential clashes with other definitions elsewhere. Unfortunately max()/max_t() from linux/minmax.h cannot be used in this context. (Lucas) Signed-off-by:
-
- 11 Mar, 2022 2 commits
-
-
Matt Roper authored
We shouldn't really be keeping track of how many SFC_DONE registers our platforms can have, but rather how many SFC hardware units there can be (each SFC unit will have one corresponding SFC_DONE register). So drop the stray GEN12_SFC_DONE_MAX definition we had in the register definition file and replace it with an I915_MAX_SFC that follows the pattern we use for other hardware units. Note that our hardware has a 2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should carry forward to future platforms, so we'll define it as #VCS/2. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Mastan Katragadda authored
A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] Fixes: 9f909e21 ("drm/i915: Implement vm_ops->access for gdb access into mmaps") Signed-off-by:Mastan Katragadda <mastanx.katragadda@intel.com> Suggested-by:
Adam Zabrocki <adamza@microsoft.com> Reported-by:
Jackson Cody <cody.jackson@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by:
-
- 08 Mar, 2022 3 commits
-
-
Matt Roper authored
Platforms with FlatCCS do not use auxiliary planes for compression control data and thus do not need traditional aux table invalidation (and the registers no longer even exist). Original-author: CQ Tang Signed-off-by:
-
Matthew Auld authored
It looks like this code was accidentally dropped at some point(in a slightly different form), so add it back. The gist is that if we know the allocation will be one single chunk, then we can just annotate the BO with I915_BO_ALLOC_CONTIGUOUS, even if the user doesn't bother. In the future this should allow us to avoid using vmap for such objects, in some upcoming patches. v2(Thomas): - Tweak the commit message to mention the future motivation Signed-off-by:
-
Matthew Auld authored
Currently this will enforce both 2M alignment and padding for any LMEM pages inserted into the GGTT. However, this was only meant to be applied to the compact-pt layout with the ppGTT. For the GGTT we can reduce the alignment and padding to 64K. Bspec: 45015 Fixes: 87bd701e ("drm/i915: enforce min GTT alignment for discrete cards") Signed-off-by:
-
- 07 Mar, 2022 4 commits
-
-
Matthew Auld authored
This is no longer possible since e6e1a304 ("drm/i915: vma is always backed by an object."). Signed-off-by:
-
Matthew Auld authored
If the vm doesn't request async binding, like for example with the dpt, then we should be able to skip the async path and avoid calling i915_vm_lock_objects() altogether. Currently if we have a moving fence set for the BO(even though it might have signalled), we still take the async patch regardless of the bind_async setting, and then later still end up just doing i915_gem_object_wait_moving_fence() anyway. Alternatively we would need to add dummy scratch object which can be locked, just for the dpt. Suggested-by:
-
Matthew Auld authored
Since we are actually mapping the object and not the vma, when dealing with LMEM, we should be careful and use the backing store size here, since the vma->node.size could have all kinds of funny padding constraints, which could result in us writing to OOB address. v2(Chris): - Prefer vma->size here, which should be the backing store size. Some more rework is needed here to stop using node.size in some other places. Signed-off-by: -
Thomas Hellström authored
The test for vma should always return true, and when assigning -EBUSY to ret, the variable should already have that value. Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-4-thomas.hellstrom@linux.intel.com
-
