- 15 Oct, 2023 3 commits
-
-
Aaron Conole authored
Paolo Abeni reports that on some systems the pyroute2 version isn't new enough to run the test suite. Ensure that we support a minimum version of 0.6 for all cases (which does include the existing ones). The 0.6.1 version was released in May of 2021, so should be propagated to most installations at this point. The alternative that Paolo proposed was to only skip when the add-flow is being run. This would be okay for most cases, except if a future test case is added that needs to do flow dump without an associated add (just guessing). In that case, it could also be broken and we would need additional skip logic anyway. Just draw a line in the sand now. Fixes: 25f16c87 ("selftests: add openvswitch selftest suite") Reported-by:
Paolo Abeni <pabeni@redhat.com> Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/Signed-off-by:
Aaron Conole <aconole@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Syzbot reported two new paths to hit an internal WARNING using the new virtio gso type VIRTIO_NET_HDR_GSO_UDP_L4. RIP: 0010:skb_checksum_help+0x4a2/0x600 net/core/dev.c:3260 skb len=64521 gso_size=344 and RIP: 0010:skb_warn_bad_offload+0x118/0x240 net/core/dev.c:3262 Older virtio types have historically had loose restrictions, leading to many entirely impractical fuzzer generated packets causing problems deep in the kernel stack. Ideally, we would have had strict validation for all types from the start. New virtio types can have tighter validation. Limit UDP GSO packets inserted via virtio to the same limits imposed by the UDP_SEGMENT socket interface: 1. must use checksum offload 2. checksum offload matches UDP header 3. no more segments than UDP_MAX_SEGMENTS 4. UDP GSO does not take modifier flags, notably SKB_GSO_TCP_ECN Fixes: 860b7f27 ("linux/virtio_net.h: Support USO offload in vnet header.") Reported-by: syzbot+01cdbc31e9c0ae9b33ac@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000005039270605eb0b7f@google.com/ Reported-by: syzbot+c99d835ff081ca30f986@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000005426680605eb0b9f@google.com/Signed-off-by:Willem de Bruijn <willemb@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Manish Chopra authored
Driver allocates the LL2 rx buffers from kmalloc() area to construct the skb using slab_build_skb() The required size allocation seems to have overlooked for accounting both skb_shared_info size and device placement padding bytes which results into the below panic when doing skb_put() for a standard MTU sized frame. skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514 head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566 dev:<NULL> … skb_panic+0x48/0x4a skb_put.cold+0x10/0x10 qed_ll2b_complete_rx_packet+0x14f/0x260 [qed] qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed] qed_ll2_rxq_completion+0xba/0x320 [qed] qed_int_sp_dpc+0x1a7/0x1e0 [qed] This patch fixes this by accouting skb_shared_info and device placement padding size bytes when allocating the buffers. Cc: David S. Miller <davem@davemloft.net> Fixes: 0a7fb11c ("qed: Add Light L2 support") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
- 14 Oct, 2023 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-10-12 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command net/mlx5e: Don't offload internal port if filter device is out device net/mlx5e: Take RTNL lock before triggering netdev notifiers net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq net/mlx5: Handle fw tracer change ownership event based on MTRC net/mlx5: Bridge, fix peer entry ageing in LAG mode net/mlx5: E-switch, register event handler before arming the event net/mlx5: Perform DMA operations in the right locations ==================== Link: https://lore.kernel.org/r/20231012195127.129585-1-saeed@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates 2023-10-11 (i40e, ice) This series contains fixes for the i40e and ice drivers. Jesse adds handling to the ice driver which resetis the device when loading on a crash kernel, preventing stale transactions from causing machine check exceptions which could prevent capturing crash data. Mateusz fixes a bug in the ice driver 'Safe mode' logic for handling the device when the DDP is missing. Michal fixes a crash when probing the i40e driver in the event that HW registers are reporting invalid/unexpected values. The following are changes since commit a950a592: net/smc: Fix pos miscalculation in statistics I'm covering for Tony Nguyen while he's out, and don't have access to create a pull request branch on his net-queue, so these are sent via mail only. ==================== Link: https://lore.kernel.org/r/20231011233334.336092-1-jacob.e.keller@intel.comSigned-off-by:
-
Mateusz Pacuszka authored
One thing is broken in the safe mode, that is ice_deinit_features() is being executed even that ice_init_features() was not causing stack trace during pci_unregister_driver(). Add check on the top of the function. Fixes: 5b246e53 ("ice: split probe into smaller functions") Signed-off-by:
Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.comSigned-off-by:
-
Jesse Brandeburg authored
When the system boots into the crash dump kernel after a panic, the ice networking device may still have pending transactions that can cause errors or machine checks when the device is re-enabled. This can prevent the crash dump kernel from loading the driver or collecting the crash data. To avoid this issue, perform a function level reset (FLR) on the ice device via PCIe config space before enabling it on the crash kernel. This will clear any outstanding transactions and stop all queues and interrupts. Restore the config space after the FLR, otherwise it was found in testing that the driver wouldn't load successfully. The following sequence causes the original issue: - Load the ice driver with modprobe ice - Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs - Trigger a crash with echo c > /proc/sysrq-trigger - Load the ice driver again (or let it load automatically) with modprobe ice - The system crashes again during pcim_enable_device() Fixes: 837f08fd ("ice: Add basic driver framework for Intel(R) E800 Series") Reported-by:
Vishal Agrawal <vagrawal@redhat.com> Reviewed-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.comSigned-off-by:
-
Michal Schmidt authored
The hardware provides the indexes of the first and the last available queue and VF. From the indexes, the driver calculates the numbers of queues and VFs. In theory, a faulty device might say the last index is smaller than the first index. In that case, the driver's calculation would underflow, it would attempt to write to non-existent registers outside of the ioremapped range and crash. I ran into this not by having a faulty device, but by an operator error. I accidentally ran a QE test meant for i40e devices on an ice device. The test used 'echo i40e > /sys/...ice PCI device.../driver_override', bound the driver to the device and crashed in one of the wr32 calls in i40e_clear_hw. Add checks to prevent underflows in the calculations of num_queues and num_vfs. With this fix, the wrong device probing reports errors and returns a failure without crashing. Fixes: 838d41d9 ("i40e: clear all queues and interrupts") Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== netfilter updates for net Patch 1, from Pablo Neira Ayuso, fixes a performance regression (since 6.4) when a large pending set update has to be canceled towards the end of the transaction. Patch 2 from myself, silences an incorrect compiler warning reported with a few (older) compiler toolchains. Patch 3, from Kees Cook, adds __counted_by annotation to nft_pipapo set backend type. I took this for net instead of -next given infra is already in place and no actual code change is made. Patch 4, from Pablo Neira Ayso, disables timeout resets on stateful element reset. The rest should only affect internal object state, e.g. reset a quota or counter, but not affect a pending timeout. Patches 5 and 6 fix NULL dereferences in 'inner header' match, control plane doesn't test for netlink attribute presence before accessing them. Broken since feature was added in 6.2, fixes from Xingyuan Mo. Last patch, from myself, fixes a bogus rule match when skb has a 0-length mac header, in this case we'd fetch data from network header instead of canceling rule evaluation. This is a day 0 bug, present since nftables was merged in 3.13. * tag 'nf-23-10-12' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_payload: fix wrong mac header matching nf_tables: fix NULL pointer dereference in nft_expr_inner_parse() nf_tables: fix NULL pointer dereference in nft_inner_init() netfilter: nf_tables: do not refresh timeout when resetting element netfilter: nf_tables: Annotate struct nft_pipapo_match with __counted_by netfilter: nfnetlink_log: silence bogus compiler warning netfilter: nf_tables: do not remove elements if set backend implements .abort ==================== Link: https://lore.kernel.org/r/20231012085724.15155-1-fw@strlen.deSigned-off-by:
-
MD Danish Anwar authored
ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the link partner. There is no public errata available yet. As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx frame. Fixes: c1e10d5d ("net: ti: icssg-prueth: Add ICSSG Stats") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20231012064626.977466-1-danishanwar@ti.comSigned-off-by:
-
Mateusz Polchlopek authored
Update the "How are representors identified?" documentation subchapter. For newer kernels driver should use SET_NETDEV_DEVLINK_PORT instead of ndo_get_devlink_port() callback. Fixes: 7712b3e9 ("Merge branch 'net-fix-netdev-to-devlink_port-linkage-and-expose-to-user'") Signed-off-by:
Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20231012123144.15768-1-mateusz.polchlopek@intel.comSigned-off-by:
-
Jiri Pirko authored
Make sure that the command values used for replies are correct. This is only affecting generated userspace helpers, no change on kernel code. Fixes: 7199c862 ("netlink: specs: devlink: add commands that do per-instance dump") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.usSigned-off-by:
-
- 13 Oct, 2023 9 commits
-
-
Albert Huang authored
If the netdevice is within a container and communicates externally through network technologies such as VxLAN, we won't be able to find routing information in the init_net namespace. To address this issue, we need to add a struct net parameter to the smc_ib_find_route function. This allow us to locate the routing information within the corresponding net namespace, ensuring the correct completion of the SMC CLC interaction. Fixes: e5c4744c ("net/smc: add SMC-Rv2 connection establishment") Signed-off-by:
Albert Huang <huangjie.albert@bytedance.com> Reviewed-by:
Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20231011074851.95280-1-huangjie.albert@bytedance.comSigned-off-by:
-
Paolo Abeni authored
As reported by Tom, .NET and applications build on top of it rely on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP socket. The blamed commit below caused a regression, as such cancellation can now fail. As suggested by Eric, this change addresses the problem explicitly causing blocking I/O operation to terminate immediately (with an error) when a concurrent disconnect() is executed. Instead of tracking the number of threads blocked on a given socket, track the number of disconnect() issued on such socket. If such counter changes after a blocking operation releasing and re-acquiring the socket lock, error out the current operation. Fixes: 4faeee0c ("tcp: deny tcp_disconnect() when threads are waiting") Reported-by:
Tom Deseyn <tdeseyn@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305Suggested-by:
-
Jesse Brandeburg authored
Since the introduction of the ice driver the code has been double-shifting the RSS enabling field, because the define already has shifts in it and can't have the regular pattern of "a << shiftval & mask" applied. Most places in the code got it right, but one line was still wrong. Fix this one location for easy backports to stable. An in-progress patch fixes the defines to "standard" and will be applied as part of the regular -next process sometime after this one. Fixes: d76a60ba ("ice: Add support for VLANs and offloads") Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.comSigned-off-by:
-
Jinjie Ruan authored
In bcm_sf2_mdio_register(), the class_find_device() will call get_device() to increment reference count for priv->master_mii_bus->dev if of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register() fails, it will call get_device() twice without decrement reference count for the device. And it is the same if bcm_sf2_mdio_register() succeeds but fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the reference count has not decremented to zero, the dev related resource will not be freed. So remove the get_device() in bcm_sf2_mdio_register(), and call put_device() if mdiobus_alloc() or mdiobus_register() fails and in bcm_sf2_mdio_unregister() to solve the issue. And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and just return 0 if it succeeds to make it cleaner. Fixes: 461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== selftests: fib_tests: Fixes for multipath list receive tests Fix two issues in recently added FIB multipath list receive tests. ==================== Link: https://lore.kernel.org/r/20231010132113.3014691-1-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The tests rely on the IPv{4,6} FIB trace points being triggered once for each forwarded packet. If receive processing is deferred to the ksoftirqd task these invocations will not be counted and the tests will fail. Fix by specifying the '-a' flag to avoid perf from filtering on the mausezahn task. Before: # ./fib_tests.sh -t ipv4_mpath_list IPv4 multipath list receive tests TEST: Multipath route hit ratio (.68) [FAIL] # ./fib_tests.sh -t ipv6_mpath_list IPv6 multipath list receive tests TEST: Multipath route hit ratio (.27) [FAIL] After: # ./fib_tests.sh -t ipv4_mpath_list IPv4 multipath list receive tests TEST: Multipath route hit ratio (1.00) [ OK ] # ./fib_tests.sh -t ipv6_mpath_list IPv6 multipath list receive tests TEST: Multipath route hit ratio (.99) [ OK ] Fixes: 8ae9efb8 ("selftests: fib_tests: Add multipath list receive tests") Reported-by:kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/Tested-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Tested-by:
Sriram Yagnaraman <sriram.yagnaraman@est.tech> Link: https://lore.kernel.org/r/20231010132113.3014691-3-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The test relies on the fib:fib_table_lookup trace point being triggered once for each forwarded packet. If RP filter is not disabled, the trace point will be triggered twice for each packet (for source validation and forwarding), potentially masking actual bugs. Fix by explicitly disabling RP filter. Before: # ./fib_tests.sh -t ipv4_mpath_list IPv4 multipath list receive tests TEST: Multipath route hit ratio (1.99) [ OK ] After: # ./fib_tests.sh -t ipv4_mpath_list IPv4 multipath list receive tests TEST: Multipath route hit ratio (.99) [ OK ] Fixes: 8ae9efb8 ("selftests: fib_tests: Add multipath list receive tests") Reported-by: -
Kuniyuki Iwashima authored
syzbot reported a warning [0] introduced by commit c48ef9c4 ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address."). After the cited commit, a v4 socket's address matches the corresponding v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa. During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses bhash and conflicts properly without checking bhash2 so that we need not check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in inet_bind2_bucket_match_addr(). However, the repro shows that we need to check that in a no-conflict case. The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls listen() for the first socket: from socket import * s1 = socket() s1.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1) s1.bind(('127.0.0.1', 0)) s2 = socket(AF_INET6) s2.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1) s2.bind(('::ffff:127.0.0.1', s1.getsockname()[1])) s1.listen() The second socket should belong to the first socket's tb2, but the second bind() creates another tb2 bucket because inet_bind2_bucket_find() returns NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the corresponding v4 address tb2. bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X) Then, listen() for the first socket calls inet_csk_get_port(), where the v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered. To avoid that, we need to check if v4-mapped-v6 sk address matches with the corresponding v4 address tb2 in inet_bind2_bucket_match(). The same checks are needed in inet_bind2_bucket_addr_match() too, so we can move all checks there and call it from inet_bind2_bucket_match(). Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr and not of sockets in the bucket. This could be refactored later by defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending ::ffff: when creating v4 tb2. [0]: WARNING: CPU: 0 PID: 5049 at net/ipv4/inet_connection_sock.c:587 inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587 Modules linked in: CPU: 0 PID: 5049 Comm: syz-executor288 Not tainted 6.6.0-rc2-syzkaller-00018-g2cf0f715 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 RIP: 0010:inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587 Code: 7c 24 08 e8 4c b6 8a 01 31 d2 be 88 01 00 00 48 c7 c7 e0 94 ae 8b e8 59 2e a3 f8 2e 2e 2e 31 c0 e9 04 fe ff ff e8 ca 88 d0 f8 <0f> 0b e9 0f f9 ff ff e8 be 88 d0 f8 49 8d 7e 48 e8 65 ca 5a 00 31 RSP: 0018:ffffc90003abfbf0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888026429100 RCX: 0000000000000000 RDX: ffff88807edcbb80 RSI: ffffffff88b73d66 RDI: ffff888026c49f38 RBP: ffff888026c49f30 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff9260f200 R13: ffff888026c49880 R14: 0000000000000000 R15: ffff888026429100 FS: 00005555557d5380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000025754000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> inet_csk_listen_start+0x155/0x360 net/ipv4/inet_connection_sock.c:1256 __inet_listen_sk+0x1b8/0x5c0 net/ipv4/af_inet.c:217 inet_listen+0x93/0xd0 net/ipv4/af_inet.c:239 __sys_listen+0x194/0x270 net/socket.c:1866 __do_sys_listen net/socket.c:1875 [inline] __se_sys_listen net/socket.c:1873 [inline] __x64_sys_listen+0x53/0x80 net/socket.c:1873 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f3a5bce3af9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc1a1c79e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a5bce3af9 RDX: 00007f3a5bce3af9 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f3a5bd565f0 R08: 0000000000000006 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000001 R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK> Fixes: c48ef9c4 ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.") Reported-by: syzbot+71e724675ba3958edb31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=71e724675ba3958edb31Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Jiri Wiesner authored
Since 429e3d12 ("bonding: Fix extraction of ports from the packet headers"), header offsets used to compute a hash in bond_xmit_hash() are relative to skb->data and not skb->head. If the tail of the header buffer of an skb really needs to be advanced and the operation is successful, the pointer to the data must be returned (and not a pointer to the head of the buffer). Fixes: 429e3d12 ("bonding: Fix extraction of ports from the packet headers") Signed-off-by:
Jiri Wiesner <jwiesner@suse.de> Acked-by:
-
- 12 Oct, 2023 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from CAN and BPF. We have a regression in TC currently under investigation, otherwise the things that stand off most are probably the TCP and AF_PACKET fixes, with both issues coming from 6.5. Previous releases - regressions: - af_packet: fix fortified memcpy() without flex array. - tcp: fix crashes trying to free half-baked MTU probes - xdp: fix zero-size allocation warning in xskq_create() - can: sja1000: always restart the tx queue after an overrun - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp - eth: nfp: avoid rmmod nfp crash issues - eth: octeontx2-pf: fix page pool frag allocation warning Previous releases - always broken: - mctp: perform route lookups under a RCU read-side lock - bpf: s390: fix clobbering the caller's backchain in the trampoline - phy: lynx-28g: cancel the CDR check work item on the remove path - dsa: qca8k: fix qca8k driver for Turris 1.x - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work() - eth: ixgbe: fix crash with empty VF macvlan list" * tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) rswitch: Fix imbalance phy_power_off() calling rswitch: Fix renesas_eth_sw_remove() implementation octeontx2-pf: Fix page pool frag allocation warning nfc: nci: assert requested protocol is valid af_packet: Fix fortified memcpy() without flex array. net: tcp: fix crashes trying to free half-baked MTU probes net/smc: Fix pos miscalculation in statistics nfp: flower: avoid rmmod nfp crash issues net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read ethtool: Fix mod state of verbose no_mask bitset net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() mctp: perform route lookups under a RCU read-side lock net: skbuff: fix kernel-doc typos s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp net/smc: Fix dependency of SMC on ISM ixgbe: fix crash with empty VF macvlan list net/mlx5e: macsec: use update_pn flag instead of PN comparation net: phy: mscc: macsec: reject PN update requests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "AngeloGioacchino Del Regno is stepping in as co-maintainer for the MediaTek SoC platform and starts by sending some dts fixes for the mt8195 platform that had been pending for a while. On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer, reflecting that Linus Walleij has been handling this on his own for the past few years. Generic RISC-V kernels are now marked as incompatible with the RZ/Five platform that requires custom hacks both for managing its DMA bounce buffers and for addressing low virtual memory. Finally, there is one bugfix for the AMDTEE firmware driver to prevent a use-after-free bug" * tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: IXP4xx MAINTAINERS entries arm64: dts: mediatek: mt8195: Set DSU PMU status to fail arm64: dts: mediatek: fix t-phy unit name arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pmLinus Torvalds authored
Pull pmdomain fix from Ulf Hansson: - imx: scu-pd: Correct the DMA2 channel * tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: imx: scu-pd: correct DMA2 channel
-
Amir Tzin authored
Although vf_vport entry of struct mlx5e_stats is never updated, its values are mistakenly copied to the caller structure in the VF representor .ndo_get_stat_64 callback mlx5e_rep_get_stats(). Remove redundant entry and use the updated one, rep_stats, instead. Fixes: 64b68e36 ("net/mlx5: Refactor and expand rep vport stat group") Reviewed-by:
Patrisious Haddad <phaddad@nvidia.com> Signed-off-by:
Amir Tzin <amirtz@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Jianbo Liu authored
In the cited commit, if the routing device is ovs internal port, the out device is set to uplink, and packets go out after encapsulation. If filter device is uplink, it can trigger the following syndrome: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 3966): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xcdb051), err(-22) Fix this issue by not offloading internal port if filter device is out device. In this case, packets are not forwarded to the root table to be processed, the termination table is used instead to forward them from uplink to uplink. Fixes: 100ad4e2 ("net/mlx5e: Offload internal port as encap route device") Signed-off-by:
Jianbo Liu <jianbol@nvidia.com> Reviewed-by:
Ariel Levkovich <lariel@nvidia.com> Signed-off-by:
-
Lama Kayal authored
Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from nic profile to uplink representor for example. Similar logic which fixed a similar scenario was previously introduced in the following commit: commit 72cc6549 net/mlx5e: Take RTNL lock when needed before calling xdp_set_features(). This fixes the following assertion and warning call trace: RTNL: assertion failed at net/core/dev.c (1961) WARNING: CPU: 13 PID: 2529 at net/core/dev.c:1961 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse CPU: 13 PID: 2529 Comm: devlink Not tainted 6.5.0_for_upstream_min_debug_2023_09_07_20_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 8f ff 80 3d 77 0d 16 01 00 75 c5 ba a9 07 00 00 48 c7 c6 c4 bb 0d 82 48 c7 c7 18 c8 06 82 c6 05 5b 0d 16 01 01 e8 44 f6 8c ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff88819930f7f0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8309f740 RCX: 0000000000000027 RDX: ffff88885fb5b5c8 RSI: 0000000000000001 RDI: ffff88885fb5b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff88819930f810 R13: ffff88810b7fea40 R14: ffff8881154e8fd8 R15: ffff888107e881a0 FS: 00007f3ad248f800(0000) GS:ffff88885fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563b85f164e0 CR3: 0000000113b5c006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_build_rep_params+0x97/0x130 [mlx5_core] mlx5e_init_ul_rep+0x9f/0x100 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_vport_rep_load+0x329/0x4a0 [mlx5_core] mlx5_esw_offloads_rep_load+0x9e/0xf0 [mlx5_core] esw_offloads_enable+0x4bc/0xe90 [mlx5_core] mlx5_eswitch_enable_locked+0x3c8/0x570 [mlx5_core] ? kmalloc_trace+0x25/0x80 mlx5_devlink_eswitch_mode_set+0x224/0x680 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x276/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3ad231340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffd70aad4b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000c36b00 RCX:00007f3ad231340a RDX: 0000000000000038 RSI: 0000000000c36b00 RDI: 0000000000000003 RBP: 0000000000c36910 R08: 00007f3ad2625200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ Fixes: 4d5ab0ad ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by:
Lama Kayal <lkayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
When mlx5e_xdp_xmit is called without the XDP_XMIT_FLUSH set it is possible that it leaves a mpwqe session open. That is ok during runtime: the session will be closed on the next call to mlx5e_xdp_xmit. But having a mpwqe session still open at XDP sq close time is problematic: the pc counter is not updated before flushing the contents of the xdpi_fifo. This results in leaking page fragments. The fix is to always close the mpwqe session at the end of mlx5e_xdp_xmit, regardless of the XDP_XMIT_FLUSH flag being set or not. Fixes: 5e0d2eef ("net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQE") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
-
Dragos Tatulea authored
When a page allocation fails during refill in mlx5e_refill_rx_wqes, the page will be released again on the next refill call. This triggers the page_pool negative page fragment count warning below: [ 338.326070] WARNING: CPU: 4 PID: 0 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] ... [ 338.328993] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 338.329094] Call Trace: [ 338.329097] <IRQ> [ 338.329100] ? __warn+0x7d/0x120 [ 338.329105] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 338.329173] ? report_bug+0x155/0x180 [ 338.329179] ? handle_bug+0x3c/0x60 [ 338.329183] ? exc_invalid_op+0x13/0x60 [ 338.329187] ? asm_exc_invalid_op+0x16/0x20 [ 338.329192] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 338.329259] mlx5e_post_rx_wqes+0x210/0x5a0 [mlx5_core] [ 338.329327] ? mlx5e_poll_rx_cq+0x88/0x6f0 [mlx5_core] [ 338.329394] mlx5e_napi_poll+0x127/0x6b0 [mlx5_core] [ 338.329461] __napi_poll+0x25/0x1a0 [ 338.329465] net_rx_action+0x28a/0x300 [ 338.329468] __do_softirq+0xcd/0x279 [ 338.329473] irq_exit_rcu+0x6a/0x90 [ 338.329477] common_interrupt+0x82/0xa0 [ 338.329482] </IRQ> This patch fixes the legacy rq case by releasing all allocated fragments and then setting the skip flag on all released fragments. It is important to note that the number of released fragments will be higher than the number of allocated fragments when an allocation error occurs. Fixes: 3f93f829 ("net/mlx5e: RX, Defer page release in legacy rq for better recycling") Tested-by:
Chris Mason <clm@fb.com> Reported-by:
-
Dragos Tatulea authored
When a page allocation fails during refill in mlx5e_post_rx_mpwqes, the page will be released again on the next refill call. This triggers the page_pool negative page fragment count warning below: [ 2436.447717] WARNING: CPU: 1 PID: 2419 at include/net/page_pool/helpers.h:130 mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] ... [ 2436.447895] RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 2436.447991] Call Trace: [ 2436.447975] mlx5e_post_rx_mpwqes+0x1d5/0xcf0 [mlx5_core] [ 2436.447994] <IRQ> [ 2436.447996] ? __warn+0x7d/0x120 [ 2436.448009] ? mlx5e_handle_rx_cqe_mpwrq+0x109/0x1d0 [mlx5_core] [ 2436.448002] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 2436.448044] ? mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] [ 2436.448061] ? report_bug+0x155/0x180 [ 2436.448065] ? handle_bug+0x36/0x70 [ 2436.448067] ? exc_invalid_op+0x13/0x60 [ 2436.448070] ? asm_exc_invalid_op+0x16/0x20 [ 2436.448079] mlx5e_napi_poll+0x122/0x6b0 [mlx5_core] [ 2436.448077] ? mlx5e_page_release_fragmented.isra.0+0x42/0x50 [mlx5_core] [ 2436.448113] ? generic_exec_single+0x35/0x100 [ 2436.448117] __napi_poll+0x25/0x1a0 [ 2436.448120] net_rx_action+0x28a/0x300 [ 2436.448122] __do_softirq+0xcd/0x279 [ 2436.448126] irq_exit_rcu+0x6a/0x90 [ 2436.448128] sysvec_apic_timer_interrupt+0x6e/0x90 [ 2436.448130] </IRQ> This patch fixes the striding rq case by setting the skip flag on all the wqe pages that were expected to have new pages allocated. Fixes: 4c2a1323 ("net/mlx5e: RX, Defer page release in striding rq for better recycling") Tested-by:
-
Maher Sanalla authored
Currently, whenever fw issues a change ownership event, the PF that owns the fw tracer drops its ownership directly and the other PFs try to pick up the ownership via what MTRC register suggests. In some cases, driver releases the ownership of the tracer and reacquires it later on. Whenever the driver releases ownership of the tracer, fw issues a change ownership event. This event can be delayed and come after driver has reacquired ownership of the tracer. Thus the late event will trigger the tracer owner PF to release the ownership again and lead to a scenario where no PF is owning the tracer. To prevent the scenario described above, when handling a change ownership event, do not drop ownership of the tracer directly, instead read the fw MTRC register to retrieve the up-to-date owner of the tracer and set it accordingly in driver level. Fixes: f53aaa31 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
With current implementation in single FDB LAG mode all packets are processed by eswitch 0 rules. As such, 'peer' FDB entries receive the packets for rules of other eswitches and are responsible for updating the main entry by sending SWITCHDEV_FDB_ADD_TO_BRIDGE notification from their background update wq task. However, this introduces a race condition when non-zero eswitch instance decides to delete a FDB entry, sends SWITCHDEV_FDB_DEL_TO_BRIDGE notification, but another eswitch's update task refreshes the same entry concurrently while its async delete work is still pending on the workque. In such case another SWITCHDEV_FDB_ADD_TO_BRIDGE event may be generated and entry will remain stuck in FDB marked as 'offloaded' since no more SWITCHDEV_FDB_DEL_TO_BRIDGE notifications are sent for deleting the peer entries. Fix the issue by synchronously marking deleted entries with MLX5_ESW_BRIDGE_FLAG_DELETED flag and skipping them in background update job. Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
-
Shay Drory authored
Currently, mlx5 is registering event handler for vport context change event some time after arming the event. this can lead to missing an event, which will result in wrong rules in the FDB. Hence, register the event handler before arming the event. This solution is valid since FW is sending vport context change event only on vports which SW armed, and SW arming the vport when enabling it, which is done after the FDB has been created. Fixes: 6933a937 ("net/mlx5: E-Switch, Use async events chain") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Shay Drory authored
The cited patch change mlx5 driver so that during probe DMA operations were performed before pci_enable_device(), and during teardown DMA operations were performed after pci_disable_device(). DMA operations require PCI to be enabled. Hence, The above leads to the following oops in PPC systems[1]. On s390x systems, as reported by Niklas Schnelle, this is a problem because mlx5_pci_init() is where the DMA and coherent mask is set but mlx5_cmd_init() already does a dma_alloc_coherent(). Thus a DMA allocation is done during probe before the correct mask is set. This causes probe to fail initialization of the cmdif SW structs on s390x after that is converted to the common dma-iommu code. This is because on s390x DMA addresses below 4 GiB are reserved on current machines and unlike the old s390x specific DMA API implementation common code enforces DMA masks. Fix it by performing the DMA operations during probe after pci_enable_device() and after the dma mask is set, and during teardown before pci_disable_device(). [1] Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 netconsole rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib iw_cm libiscsi scsi_transport_iscsi ib_cm ib_uverbs ib_core mlx5_core(-) ptp pps_core fuse vmx_crypto crc32c_vpmsum [last unloaded: mlx5_ib] CPU: 1 PID: 8937 Comm: modprobe Not tainted 6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02 #1 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c000000000423388 LR: c0000000001e733c CTR: c0000000001e4720 REGS: c0000000055636d0 TRAP: 0380 Not tainted (6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02) MSR: 8000000000009033 CR: 24008884 XER: 20040000 CFAR: c0000000001e7338 IRQMASK: 0 NIP [c000000000423388] __free_pages+0x28/0x160 LR [c0000000001e733c] dma_direct_free+0xac/0x190 Call Trace: [c000000005563970] [5deadbeef0000100] 0x5deadbeef0000100 (unreliable) [c0000000055639b0] [c0000000003d46cc] kfree+0x7c/0x150 [c000000005563a40] [c0000000001e47c8] dma_free_attrs+0xa8/0x1a0 [c000000005563aa0] [c008000000d0064c] mlx5_cmd_cleanup+0xa4/0x100 [mlx5_core] [c000000005563ad0] [c008000000cf629c] mlx5_mdev_uninit+0xf4/0x140 [mlx5_core] [c000000005563b00] [c008000000cf6448] remove_one+0x160/0x1d0 [mlx5_core] [c000000005563b40] [c000000000958540] pci_device_remove+0x60/0x110 [c000000005563b80] [c000000000a35e80] device_remove+0x70/0xd0 [c000000005563bb0] [c000000000a37a38] device_release_driver_internal+0x2a8/0x330 [c000000005563c00] [c000000000a37b8c] driver_detach+0x8c/0x160 [c000000005563c40] [c000000000a35350] bus_remove_driver+0x90/0x110 [c000000005563c80] [c000000000a38948] driver_unregister+0x48/0x90 [c000000005563cf0] [c000000000957e38] pci_unregister_driver+0x38/0x150 [c000000005563d40] [c008000000eb6140] mlx5_cleanup+0x38/0x90 [mlx5_core] Fixes: 06cd555f ("net/mlx5: split mlx5_cmd_init() to probe and reload routines") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Niklas Schnelle <schnelle@linux.ibm.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Some pin control fixes for v6.6 which have been stacking up in my tree. Dmitry's fix to some locking in the core is the most substantial, that was a really neat fix. The rest is the usual assorted spray of minor driver fixes. - Drop some minor code causing warnings in the Lantiq driver - Fix out of bounds write in the Nuvoton driver - Fix lost IRQs with CONFIG_PM in the Starfive driver - Fix a locking issue in find_pinctrl() - Revert a regressive Tegra debug patch - Fix the Renesas RZN1 pin muxing" * tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: renesas: rzn1: Enable missing PINMUX Revert "pinctrl: tegra: Add support to display pin function" pinctrl: avoid unsafe code pattern in find_pinctrl() pinctrl: starfive: jh7110: Add system pm ops to save and restore context pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled pinctrl: nuvoton: wpcm450: fix out of bounds write pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()
-
Krzysztof Hałasa authored
Update MAINTAINERS entries for Intel IXP4xx SoCs. Linus has been handling all IXP4xx stuff since 2019 or so. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Deepak Saxena <dsaxena@plexity.net> Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.plSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Paolo Abeni authored
Yoshihiro Shimoda says: ==================== rswitch: Fix issues on specific conditions This patch series fix some issues of rswitch driver on specific condtions. ==================== Link: https://lore.kernel.org/r/20231010124858.183891-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
The phy_power_off() should not be called if phy_power_on() failed. So, add a condition .power_count before calls phy_power_off(). Fixes: 5cb63092 ("net: renesas: rswitch: Add phy_power_{on,off}() calling") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
Fix functions calling order and a condition in renesas_eth_sw_remove(). Otherwise, kernel NULL pointer dereference happens from phy_stop() if a net device opens. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
-
Florian Westphal authored
mcast packets get looped back to the local machine. Such packets have a 0-length mac header, we should treat this like "mac header not set" and abort rule evaluation. As-is, we just copy data from the network header instead. Fixes: 96518518 ("netfilter: add nftables") Reported-by:
Blažej Krajňák <krajnak@levonet.sk> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
