SFMR register creates and configures FIDs. As preparation unified bridge
model, add some required fields for future use.

The device includes two main tables to support layer 2 multicast (i.e.,
MDB and flooding). These are the PGT (Port Group Table) and the
MPE (Multicast Port Egress) table.
- PGT is {MID -> (bitmap of local_port, SPME index)}
- MPE is {(Local port, SMPE index) -> eVID}

In Spectrum-2 and later ASICs, the SMPE index is an attribute of the FID
and programmed via new fields in SFMR register - 'smpe_valid' and 'smpe'.

Add the two mentioned fields for future use and increase the length of
the register accordingly.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SMID register maps multicast ID (MID) into a list of local ports.
As preparation for unified bridge model, add some required fields for
future use.

The device includes two main tables to support layer 2 multicast (i.e.,
MDB and flooding). These are the PGT (Port Group Table) and the
MPE (Multicast Port Egress) table.
- PGT is {MID -> (bitmap of local_port, SPME index)}
- MPE is {(Local port, SMPE index) -> eVID}

In Spectrum-1, both indexes into the MPE table (local port and SMPE) are
derived from the PGT table. Therefore, the SMPE index needs to be
programmed as part of the PGT entry via new fields in SMID - 'smpe_valid'
and 'smpe'.

Add the two mentioned fields for future use and align the callers of
mlxsw_reg_smid2_pack() to pass zeros for SMPE fields.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SMPE register maps {egress_port, SMPE index} -> VID.

The device includes two main tables to support layer 2 multicast (i.e.,
MDB and flooding). These are the PGT (Port Group Table) and the
MPE (Multicast Port Egress) table.
- PGT is {MID -> (bitmap of local_port, SPME index)}
- MPE is {(Local port, SMPE index) -> eVID}

In Spectrum-1, the index into the MPE table - called switch multicast to
port egress VID (SMPE) - is derived from the PGT entry, whereas in
Spectrum-2 and later ASICs it is derived from the FID.

In the legacy model, software did not interact with this table as it was
completely hidden in firmware. In the new model, software needs to
populate the table itself in order to map from {Local port, SMPE index} to
an egress VID. This is done using the SMPE register.

Add the register for future use.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SVFA register controls the VID to FID mapping and {Port, VID} to FID
mapping for virtualized ports. As preparation for unified bridge model,
add some required fields for future use.

On ingress, after ingress ACL, a packet needs to be classified to a FID.
The key for this lookup can be one of:
1. VID. When port is not in virtual mode.
2. {RQ, VID}. When port is in virtual mode.
3. FID. When FID was set by ingress ACL.

Since RITR no longer performs ingress configuration, the ingress RIF for
the first two entry types needs to be set via new fields in SVFA -
'irif_v' and 'irif'.

Add the two mentioned fields for future use and increase the length of
the register accordingly.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFMR register creates and configures FIDs. As preparation for unified
bridge model, add some required fields for future use.

On ingress, after ingress ACL, a packet needs to be classified to a FID.
The key for this lookup can be one of:
1. VID. When port is not in virtual mode.
2. {RQ, VID}. When port is in virtual mode.
3. FID. When FID was set by ingress ACL.
   For example, via VR_AND_FID_ACTION.

Since RITR no longer performs ingress configuration, the ingress RIF for
the last entry type needs to be set via new fields in SFMR - 'irif_v'
and 'irif'.

Add the two mentioned fields for future use.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFMR register creates and configures FIDs. As preparation for unified
bridge model, add a field for future use.

In the new model, RITR no longer configures the rFID used for sub-port RIFs
and it has to be created by software via SFMR. Such FIDs need to be created
with special flood indication using 'flood_rsp' field. When set, this bit
instructs the device to manage the flooding entries for this FID in a
reserved part of the port group table (PGT).
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'Commit 6f91f4ba ("vmxnet3: add support for capability registers")'
added support for capability registers. These registers are used
to advertize capabilities of the device.

The patch updated the dev_caps to disable outer checksum offload if
PTCR register does not support it. However, it missed to update
other overlay offloads. This patch fixes this issue.

Fixes: 6f91f4ba ("vmxnet3: add support for capability registers")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
raw: Fix nits of RCU conversion series.

The first patch fixes a build error by commit ba44f818 ("raw: use
more conventional iterators"), but it does not land in the net tree,
so this series is targeted to net-next.  The second patch replaces some
hlist functions with sk's helper macros.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

hlist_nulls_add_head_rcu() and hlist_nulls_for_each_entry() have dedicated
macros for sk.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The trailing semicolon causes a compiler error, so let's remove it.

net/ipv4/raw.c: In function ‘raw_icmp_error’:
net/ipv4/raw.c:266:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  266 |  struct hlist_nulls_head *hlist;
      |  ^~~~~~

Fixes: ba44f818 ("raw: use more conventional iterators")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Delete the redundant word 'and'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Delete the redundant word 'and'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Delete the redundant word 'and'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 9386ebcc ("nfp: update nfp_X logging definitions")

The reverted patch was intended to improve logging for the NFP driver by
including information such as the source code file and number in log
messages.

Unfortunately our experience is that this has not improved things as
we had hoped. The resulting logs are inconsistent with (most) other
kernel log messages. And rely on knowledge of the source code version
in order for the extra information to be useful.

Thus, revert the change.

We acknowledge that Jakub Kicinski <kuba@kernel.org> foresaw this problem.
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
net: introduce mii_bmcr_encode_fixed()

While converting the mv88e6xxx driver to phylink pcs, it has been
noticed that we've started to have repeated cases where we convert a
speed and duplex to a BMCR value.

Rather than open coding this in multiple locations, let's provide a
helper for this - in linux/mii.h. This helper not only takes care of
the standard 10, 100 and 1000Mbps encodings, but also includes
2500Mbps (which is the same as 1000Mbps) for those users who require
that encoding as well. Unknown speeds will be encoded to 10Mbps, and
non-full duplexes will be encoded as half duplex.

This series converts the existing users to the new helper, and the
mv88e6xxx conversion will add further users in the 6352 and 639x PCS
code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the newly introduced mii_bmcr_encode_fixed() for the xpcs driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the newly introduced mii_bmcr_encode_fixed() to get the
BMCR value when setting loopback mode for the 88e1510.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

phylib can make use of the newly introduced mii_bmcr_encode_fixed()
macro, so let's convert it over.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a function to encode a fixed speed/duplex to a BMCR value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
raw: RCU conversion

Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.

I thought rwlock were at fault and sent this patch:

https://lkml.org/lkml/2022/6/17/272

But Peter and Linus essentially told me rwlock had to be unfair.

We need to get rid of rwlock in networking stacks.

Without this conversion, following script triggers soft lockups:

for i in {1..48}
do
 ping -f -n -q 127.0.0.1 &
 sleep 0.1
done

Next step will be to convert ping sockets to RCU as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.

I thought rwlock were at fault and sent this patch:

https://lkml.org/lkml/2022/6/17/272

But Peter and Linus essentially told me rwlock had to be unfair.

We need to get rid of rwlock in networking code.

Without this fix, following script triggers soft lockups:

for i in {1..48}
do
 ping -f -n -q 127.0.0.1 &
 sleep 0.1
done

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to prepare the following patch,
I change raw v4 & v6 code to use more conventional
iterators.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS configuration by using a
new base time.

For example, if the driver gets a base time 0 of Qbv configuration from
user, and current time is 20000. The driver will set the TAS base time
to be 20000. After the PTP clock adjustment, the current time becomes
10000. If the TAS base time is still 20000, it will be a future time,
and TAS entry list will stop running. Another example, if the current
time becomes to be 10000000 after PTP clock adjust, a large time offset
can cause the hardware to hang.

This patch introduces a tas_clock_adjust() function to reset the TAS
module by using a new base time after the PTP clock adjustment. This can
avoid issues above.

Due to PTP clock adjustment can occur at any time, it may conflict with
the TAS configuration. We introduce a new TAS lock to serialize the
access to the TAS registers.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QCOM_SOCINFO depends on QCOM_SMEM but is not selected, this cause some
problems with QCOM_SOCINFO getting selected with the dependency of
QCOM_SMEM not met.
To fix this remove the select in Kconfig and add additional info in the
DWMAC_IPQ806X config description.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9ec092d2 ("net: ethernet: stmmac: add missing sgmii configure for ipq806x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.

I thought rwlock were at fault and sent this patch:

https://lkml.org/lkml/2022/6/17/272

But Peter and Linus essentially told me rwlock had to be unfair.

We need to get rid of rwlock in networking code.

Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ax25_dev_device_up() is only called during device setup, which is
done in user context. In addition, ax25_dev_device_up()
unconditionally calls ax25_register_dev_sysctl(), which already
allocates with GFP_KERNEL.

Since it is allowed to sleep in this function, here we change
ax25_dev_device_up() to use GFP_KERNEL to reduce unnecessary
out-of-memory errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Lafreniere <pjlafren@mtu.edu>
Link: https://lore.kernel.org/r/20220616152333.9812-1-pjlafren@mtu.eduSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Delete the redundant word 'the'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616164155.11686-1-wangxiang@cdjrlc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Delete the redundant word 'the'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220616142624.3397-1-wangxiang@cdjrlc.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Show correct pause frame parameters for nfp. These parameters cannot
be configured, so .set_pauseparam() is not implemented. With this
change:

 #ethtool --show-pause enp1s0np0
 Pause parameters for enp1s0np0:
 Autonegotiate:  off
 RX:             on
 TX:             on
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220616133358.135305-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rework MDIO locking to avoid potential  circular locking:

 WARNING: possible circular locking dependency detected
 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5 Not tainted
 ------------------------------------------------------
 kworker/u2:4/68 is trying to acquire lock:
 81f3c83c (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}, at: regmap_write+0x50/0x8c

 but task is already holding lock:
 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&bus->mdio_lock){+.+.}-{4:4}:
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        mdiobus_write+0x44/0x80
        ar9331_sw_bus_write+0x50/0xe4
        _regmap_raw_write_impl+0x604/0x724
        _regmap_bus_raw_write+0x9c/0xb4
        _regmap_write+0xdc/0x1a0
        _regmap_update_bits+0xf4/0x118
        _regmap_select_page+0x108/0x138
        _regmap_raw_read+0x25c/0x288
        _regmap_bus_read+0x60/0x98
        _regmap_read+0xd4/0x1b0
        _regmap_update_bits+0xc4/0x118
        regmap_update_bits_base+0x64/0x8c
        ar9331_sw_irq_bus_sync_unlock+0x40/0x6c
        __irq_set_handler+0x7c/0xac
        ar9331_sw_irq_map+0x48/0x7c
        irq_domain_associate+0x174/0x208
        irq_create_mapping_affinity+0x1a8/0x230
        ar9331_sw_probe+0x22c/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        device_add+0x600/0x800
        mdio_device_register+0x68/0xa0
        of_mdiobus_register+0x2bc/0x3c4
        ag71xx_probe+0x6e4/0x984
        platform_probe+0x78/0xd0
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __driver_attach+0x17c/0x190
        bus_for_each_dev+0x8c/0xd0
        bus_add_driver+0x110/0x228
        driver_register+0xe4/0x12c
        do_one_initcall+0x104/0x2a0
        kernel_init_freeable+0x250/0x288
        kernel_init+0x34/0x130
        ret_from_kernel_thread+0x14/0x1c

 -> #0 (ar9331:1005:(&ar9331_mdio_regmap_config)->lock){+.+.}-{4:4}:
        check_noncircular+0x88/0xc0
        __lock_acquire+0x10bc/0x18bc
        lock_acquire+0x2d4/0x360
        __mutex_lock+0xf8/0x384
        mutex_lock_nested+0x2c/0x38
        regmap_write+0x50/0x8c
        ar9331_sw_mbus_read+0x74/0x1b8
        __mdiobus_read+0x90/0xec
        mdiobus_read+0x50/0x78
        get_phy_device+0xa0/0x18c
        fwnode_mdiobus_register_phy+0x120/0x1d4
        of_mdiobus_register+0x244/0x3c4
        devm_of_mdiobus_register+0xe8/0x100
        ar9331_sw_setup+0x16c/0x3a0
        dsa_register_switch+0x7dc/0xcc0
        ar9331_sw_probe+0x370/0x388
        mdio_probe+0x44/0x70
        really_probe+0x200/0x424
        __driver_probe_device+0x290/0x298
        driver_probe_device+0x54/0xe4
        __device_attach_driver+0xe4/0x130
        bus_for_each_drv+0xb4/0xd8
        __device_attach+0x104/0x1a4
        bus_probe_device+0x48/0xc4
        deferred_probe_work_func+0xf0/0x10c
        process_one_work+0x314/0x4d4
        worker_thread+0x2a4/0x354
        kthread+0x134/0x13c
        ret_from_kernel_thread+0x14/0x1c

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&bus->mdio_lock);
                                lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);
                                lock(&bus->mdio_lock);
   lock(ar9331:1005:(&ar9331_mdio_regmap_config)->lock);

  *** DEADLOCK ***

 5 locks held by kworker/u2:4/68:
  #0: 81c04eb4 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #1: 81f0de78 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1e4/0x4d4
  #2: 81f0a880 (&dev->mutex){....}-{4:4}, at: __device_attach+0x40/0x1a4
  #3: 80c8aee0 (dsa2_mutex){+.+.}-{4:4}, at: dsa_register_switch+0x5c/0xcc0
  #4: 81f60494 (&bus->mdio_lock){+.+.}-{4:4}, at: mdiobus_read+0x40/0x78

 stack backtrace:
 CPU: 0 PID: 68 Comm: kworker/u2:4 Not tainted 5.19.0-rc1-ar9331-00017-g3ab364c7c48c #5
 Workqueue: events_unbound deferred_probe_work_func
 Stack : 00000056 800d4638 81f0d64c 00000004 00000018 00000000 80a20000 80a20000
         80937590 81ef3858 81f0d760 3913578a 00000005 8045e824 81f0d600 a8db84cc
         00000000 00000000 80937590 00000a44 00000000 00000002 00000001 ffffffff
         81f0d6a4 80982d7c 0000000f 20202020 80a20000 00000001 80937590 81ef3858
         81f0d760 3913578a 00000005 00000005 00000000 03bd0000 00000000 80e00000
         ...
 Call Trace:
 [<80069db0>] show_stack+0x94/0x130
 [<8045e824>] dump_stack_lvl+0x54/0x8c
 [<800c7fac>] check_noncircular+0x88/0xc0
 [<800ca068>] __lock_acquire+0x10bc/0x18bc
 [<800cb478>] lock_acquire+0x2d4/0x360
 [<807b84c4>] __mutex_lock+0xf8/0x384
 [<807b877c>] mutex_lock_nested+0x2c/0x38
 [<804ea640>] regmap_write+0x50/0x8c
 [<80501e38>] ar9331_sw_mbus_read+0x74/0x1b8
 [<804fe9a0>] __mdiobus_read+0x90/0xec
 [<804feac4>] mdiobus_read+0x50/0x78
 [<804fcf74>] get_phy_device+0xa0/0x18c
 [<804ffeb4>] fwnode_mdiobus_register_phy+0x120/0x1d4
 [<805004f0>] of_mdiobus_register+0x244/0x3c4
 [<804f0c50>] devm_of_mdiobus_register+0xe8/0x100
 [<805017a0>] ar9331_sw_setup+0x16c/0x3a0
 [<807355c8>] dsa_register_switch+0x7dc/0xcc0
 [<80501468>] ar9331_sw_probe+0x370/0x388
 [<804ff0c0>] mdio_probe+0x44/0x70
 [<804d1848>] really_probe+0x200/0x424
 [<804d1cfc>] __driver_probe_device+0x290/0x298
 [<804d1d58>] driver_probe_device+0x54/0xe4
 [<804d2298>] __device_attach_driver+0xe4/0x130
 [<804cf048>] bus_for_each_drv+0xb4/0xd8
 [<804d200c>] __device_attach+0x104/0x1a4
 [<804d026c>] bus_probe_device+0x48/0xc4
 [<804d108c>] deferred_probe_work_func+0xf0/0x10c
 [<800a0ffc>] process_one_work+0x314/0x4d4
 [<800a17fc>] worker_thread+0x2a4/0x354
 [<800a9a54>] kthread+0x134/0x13c
 [<8006306c>] ret_from_kernel_thread+0x14/0x1c
[
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220616112550.877118-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-06-17

We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).

The main changes are:

1) Add 64 bit enum value support to BTF, from Yonghong Song.

2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.

3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
   socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.

4) Fix libbpf's internal USDT address translation logic for shared libraries as
   well as uprobe's symbol file offset calculation, from Andrii Nakryiko.

5) Extend libbpf to provide an API for textual representation of the various
   map/prog/attach/link types and use it in bpftool, from Daniel Müller.

6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
   core seen in 32 bit when storing BPF function addresses, from Pu Lehui.

7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
   for 'long' types, from Douglas Raillard.

8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
   has been unreliable and caused a regression on COS, from Quentin Monnet.

9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
   detachment, from Tadeusz Struk.

10) Fix bpftool build bootstrapping during cross compilation which was pointing
    to the wrong AR process, from Shahab Vahedi.

11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.

12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
    is no free element. Also add a benchmark as reproducer, from Feng Zhou.

13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.

14) Various minor cleanup and improvements all over the place.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
  bpf: Fix bpf_skc_lookup comment wrt. return type
  bpf: Fix non-static bpf_func_proto struct definitions
  selftests/bpf: Don't force lld on non-x86 architectures
  selftests/bpf: Add selftests for raw syncookie helpers in TC mode
  bpf: Allow the new syncookie helpers to work with SKBs
  selftests/bpf: Add selftests for raw syncookie helpers
  bpf: Add helpers to issue and check SYN cookies in XDP
  bpf: Allow helpers to accept pointers with a fixed size
  bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
  selftests/bpf: add tests for sleepable (uk)probes
  libbpf: add support for sleepable uprobe programs
  bpf: allow sleepable uprobe programs to attach
  bpf: implement sleepable uprobes by chaining gps
  bpf: move bpf_prog to bpf.h
  libbpf: Fix internal USDT address translation logic for shared libraries
  samples/bpf: Check detach prog exist or not in xdp_fwd
  selftests/bpf: Avoid skipping certain subtests
  selftests/bpf: Fix test_varlen verification failure with latest llvm
  bpftool: Do not check return value from libbpf_set_strict_mode()
  Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
  ...
====================

Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The function no longer returns 'unsigned long' as of commit edbf8c01
("bpf: add skc_lookup_tcp helper").
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220617152121.29617-1-tklauser@distanz.ch

This patch does two things:

1) Marks the dynptr bpf_func_proto structs that were added in [1]
   as static, as pointed out by the kernel test robot in [2].

2) There are some bpf_func_proto structs marked as extern which can
   instead be statically defined.

  [1] https://lore.kernel.org/bpf/20220523210712.3641569-1-joannelkoong@gmail.com/
  [2] https://lore.kernel.org/bpf/62ab89f2.Pko7sI08RAKdF8R6%25lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220616225407.1878436-1-joannelkoong@gmail.com

tipc_dest_list_len() is not being called anywhere. Clean it up.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

JML register on probe will return zero . This register is configured
later on macb_init_hw() which is called on open.
Since we have zero, after header and FCS length subtraction we will get
negative max_mtu size. This issue was affecting DSA drivers with MTU support
(for example KSZ9477).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged
here for calculating the size of the destination buffer (0x10 instead of
0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with
the source and dest being struct fw_section_info_st, so the memcpy should
be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's
responsibility to figure out.

Avoid the whole thing and just do a direct assignment. This results in
no change to the executable code.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: netdev@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://github.com/ClangBuiltLinux/linux/issues/1592Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: David S. Miller <davem@davemloft.net>

Current kernel will compile this driver with warnings. This patch will
fix it.

drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_fast_reset':
drivers/net/ethernet/atheros/ag71xx.c:996:31: warning: passing argument 2 of 'ag71xx_hw_set
_macaddr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
  996 |  ag71xx_hw_set_macaddr(ag, dev->dev_addr);
      |                            ~~~^~~~~~~~~~
drivers/net/ethernet/atheros/ag71xx.c:951:69: note: expected 'unsigned char *' but argument
 is of type 'const unsigned char *'
  951 | static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
      |                                                      ~~~~~~~~~~~~~~~^~~
drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_open':
drivers/net/ethernet/atheros/ag71xx.c:1441:32: warning: passing argument 2 of 'ag71xx_hw_se
t_macaddr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
 1441 |  ag71xx_hw_set_macaddr(ag, ndev->dev_addr);
      |                            ~~~~^~~~~~~~~~
drivers/net/ethernet/atheros/ag71xx.c:951:69: note: expected 'unsigned char *' but argument
 is of type 'const unsigned char *'
  951 | static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
      |                                                      ~~~~~~~~~~~~~~~^~~

Fixes: adeef3e3 ("net: constify netdev->dev_addr")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove accidental dup of tcp_wmem_schedule.
Signed-off-by: David S. Miller <davem@davemloft.net>

Ong Boon Leong says:

====================
pcs-xpcs, stmmac: add 1000BASE-X AN for network switch

Thanks for v4 review feedback in [1] and [2]. I have changed the v5
implementation as follow.

v5 changes:
1/5 - No change from v4.
2/5 - No change from v4.
3/5 - [Fix] make xpcs_modify_changed() static and use
      mdiodev_modify_changed() for cleaner code as suggested by
      Russell King.
4/5 - [Fix] Use fwnode_get_phy_mode() as recommended by Andrew Lunn.
5/5 - [Fix] Make fwnode = of_fwnode_handle(priv->plat->phylink_node)
      order after priv = netdev_priv(dev).

v4 changes:
1/5 - Squash v3:1/7 & 2/7 patches into v4:1/6 so that it passes build.
2/5 - [No change] same as v3:3/7
3/5 - [Fix] Fix issues identified by Russell in [1]
4/5 - [Fix] Drop v3:5/7 patch per input by Russell in [2] and make
            dwmac-intel clear the ovr_an_inband flag if fixed-link
            is used in ACPI _DSD.
5/5 - [No change] same as v3:7/7

For the steps to setup ACPI _DSD and checking, they are the same
as in [3]

Reference:
[1] https://patchwork.kernel.org/comment/24894239/
[2] https://patchwork.kernel.org/comment/24895330/
[3] https://patchwork.kernel.org/project/netdevbpf/cover/20220610033610.114084-1-boon.leong.ong@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac_mdio_register() lacks fixed-link consideration and only skip PHY
scanning if it has done DT style PHY discovery. So, for DT or ACPI _DSD
setting of fixed-link, the PHY scanning should not happen.

v2: fix incorrect order related to fwnode that is not caught in non-DT
    platform.
Tested-by: Emilio Riva <emilio.riva@ericsson.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>