- 19 Apr, 2024 5 commits
-
-
Chao Yu authored
Convert f2fs__page tracepoint class() and its instances to use folio and related functionality, and rename it to f2fs__folio(). Signed-off-by:
Chao Yu <chao@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Convert f2fs_read_inline_data() to use folio and related functionality, and also convert its caller to use folio. Signed-off-by:
-
Chao Yu authored
Convert f2fs_read_single_page() to use folio and related functionality. Signed-off-by:
-
Chao Yu authored
Convert f2fs_mpage_readpages() to use folio and related functionality. Signed-off-by:
-
Jaegeuk Kim authored
This reverts commit 930e2607 ("f2fs: remove obsolete whint_mode"), as we decide to pass write hints to the disk. Cc: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by:
-
- 14 Apr, 2024 2 commits
-
-
Daeho Jeong authored
Since the allocation happens in conventional LU for zoned storage, we can allow direct io for that. Signed-off-by:
Daeho Jeong <daehojeong@google.com> Reviewed-by:
-
Daeho Jeong authored
In a case writing without fallocate(), we can't guarantee it's allocated in the conventional area for zoned stroage. To make it consistent across storage devices, we disallow it regardless of storage device types. Signed-off-by:
-
- 12 Apr, 2024 8 commits
-
-
Jaegeuk Kim authored
Let's convert PageWriteback to folio_test_writeback. Reviewed-by:
-
Zhiguo Niu authored
some user behaviors requested filesystem operations, which will cause filesystem not idle. Meanwhile adjust some f2fs_update_time(REQ_TIME) positions. Signed-off-by:
Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by:
-
Daeho Jeong authored
While do not allocating a new section in advance for file pinning area, I missed that we should write the sum block for the last segment of a file pinning section. Fixes: 9703d69d ("f2fs: support file pinning for zoned devices") Signed-off-by:
-
Jaegeuk Kim authored
Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread); Reported-by:"Light Hsieh (謝明燈)" <Light.Hsieh@mediatek.com> Reviewed-by:
-
Chao Yu authored
ioctl(F2FS_IOC_MOVE_RANGE) can truncate or punch hole on pinned file, fix to disallow it. Fixes: 5fed0be8 ("f2fs: do not allow partial truncation on pinned file") Signed-off-by:
-
Chao Yu authored
compress and pinfile flag should be checked after inode lock held to avoid race condition, fix it. Fixes: 4c8ff709 ("f2fs: support data compression") Fixes: 5fed0be8 ("f2fs: do not allow partial truncation on pinned file") Signed-off-by:
-
Chao Yu authored
Compress flag should be checked after inode lock held to avoid racing w/ f2fs_setflags_common() , fix it. Fixes: 5fdb322f ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE") Reported-by:
-
Chao Yu authored
Compress flag should be checked after inode lock held to avoid racing w/ f2fs_setflags_common(), fix it. Fixes: 4c8ff709 ("f2fs: support data compression") Reported-by:
-
- 09 Apr, 2024 1 commit
-
-
Wenjie Qi authored
If the max open zones of zoned devices are less than the active logs of F2FS, the device may error due to insufficient zone resources when multiple active logs are being written at the same time. Signed-off-by:
Wenjie Qi <qwjhust@gmail.com> Signed-off-by:
-
- 02 Apr, 2024 1 commit
-
-
Zhiguo Niu authored
A length that exceeds the real size of the inode may be specified from user, although these out-of-range areas are not mapped, but they still need to be check in while loop, which is unnecessary. Signed-off-by:
-
- 29 Mar, 2024 4 commits
-
-
Yunlei He authored
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set. If create new file or open file during this gap, these files will not use inlinecrypt. Worse case, it may lead to data corruption if wrappedkey_v0 is enable. Thread A: Thread B: -f2fs_remount -f2fs_file_open or f2fs_new_inode -default_options <- clear SB_INLINECRYPT flag -fscrypt_select_encryption_impl -parse_options <- set SB_INLINECRYPT again Signed-off-by:Yunlei He <heyunlei@oppo.com> Reviewed-by:
-
Chao Yu authored
In below race condition, dst page may become writeback status in __clone_blkaddrs(), it needs to wait writeback before update, fix it. Thread A GC Thread - f2fs_move_file_range - filemap_write_and_wait_range(dst) - gc_data_segment - f2fs_down_write(dst) - move_data_page - set_page_writeback(dst_page) - f2fs_submit_page_write - f2fs_up_write(dst) - f2fs_down_write(dst) - __exchange_data_block - __clone_blkaddrs - f2fs_get_new_data_page - memcpy_page Fixes: 0a2aa8fb ("f2fs: refactor __exchange_data_block for speed up") Signed-off-by: -
Chao Yu authored
This patch supports to map continuous holes or preallocated addresses to improve performace of lookuping mapping info during read DIO. [testcase 1] xfs_io -f /mnt/f2fs/hole -c "truncate 1m" -c "fsync" xfs_io -d /mnt/f2fs/hole -c "pread -b 1m 0 1m" [before] f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 ...... f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576 [after] f2fs_direct_IO_enter: dev = (253,16), ino = 6 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0 f2fs_map_blocks: dev = (253,16), ino = 6, file offset = 0, start blkaddr = 0x0, len = 0x100, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_direct_IO_exit: dev = (253,16), ino = 6 pos = 0 len = 1048576 rw = 0 ret = 1048576 [testcase 2] xfs_io -f /mnt/f2fs/preallocated -c "falloc 0 1m" -c "fsync" xfs_io -d /mnt/f2fs/preallocated -c "pread -b 1m 0 1m" [before] f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 1, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 2, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 3, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 4, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 5, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 6, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 7, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 8, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 9, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 10, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 11, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 12, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 13, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 14, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 15, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 16, start blkaddr = 0x0, len = 0x0, flags = 0, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 ...... f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576 [after] f2fs_direct_IO_enter: dev = (253,16), ino = 11 pos = 0 len = 1048576 ki_flags = 20000 ki_ioprio = 0 rw = 0 f2fs_map_blocks: dev = (253,16), ino = 11, file offset = 0, start blkaddr = 0xffffffff, len = 0x100, flags = 4, seg_type = 1, may_create = 0, multidevice = 0, flag = 3, err = 0 f2fs_direct_IO_exit: dev = (253,16), ino = 11 pos = 0 len = 1048576 rw = 0 ret = 1048576 Signed-off-by:
-
Chao Yu authored
As reported by Yi Zhang in mailing list [1], kernel warning was catched during zbd/010 test as below: ./check zbd/010 zbd/010 (test gap zone support with F2FS) [failed] runtime ... 3.752s something found in dmesg: [ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13 [ 4378.192349] null_blk: module loaded [ 4378.209860] null_blk: disk nullb0 created [ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520] dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0 [ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred [ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20 [ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device ... (See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg' WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51 CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1 RIP: 0010:iomap_iter+0x32b/0x350 Call Trace: <TASK> __iomap_dio_rw+0x1df/0x830 f2fs_file_read_iter+0x156/0x3d0 [f2fs] aio_read+0x138/0x210 io_submit_one+0x188/0x8c0 __x64_sys_io_submit+0x8c/0x1a0 do_syscall_64+0x86/0x170 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Shinichiro Kawasaki helps to analyse this issue and proposes a potential fixing patch in [2]. Quoted from reply of Shinichiro Kawasaki: "I confirmed that the trigger commit is dbf8e63f as Yi reported. I took a look in the commit, but it looks fine to me. So I thought the cause is not in the commit diff. I found the WARN is printed when the f2fs is set up with multiple devices, and read requests are mapped to the very first block of the second device in the direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached() modify map->m_pblk as the physical block address from each block device. It becomes zero when it is mapped to the first block of the device. However, f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the whole f2fs, across the all block devices. It compares map->m_pblk against NULL_ADDR == 0, then go into the unexpected branch and sets the invalid iomap->length. The WARN catches the invalid iomap->length. This WARN is printed even for non-zoned block devices, by following steps. - Create two (non-zoned) null_blk devices memory backed with 128MB size each: nullb0 and nullb1. # mkfs.f2fs /dev/nullb0 -c /dev/nullb1 # mount -t f2fs /dev/nullb0 "${mount_dir}" # dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192 # dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct ..." So, the root cause of this issue is: when multi-devices feature is on, f2fs_map_blocks() may return zero blkaddr in non-primary device, which is a verified valid block address, however, f2fs_iomap_begin() treats it as an invalid block address, and then it triggers the warning in iomap framework code. Finally, as discussed, we decide to use a more simple and direct way that checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of (map.m_pblk != NULL_ADDR) to fix this issue. Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this issue. [1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/ [2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/Reported-by:Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/Tested-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by:
-
- 26 Mar, 2024 4 commits
-
-
Chao Yu authored
No logic changes. Signed-off-by:
-
Chao Yu authored
As Roman Smirnov reported as below: " There is a possible bug in f2fs_truncate_inode_blocks(): if (err < 0 && err != -ENOENT) goto fail; ... offset[1] = 0; offset[0]++; nofs += err; If err = -ENOENT then nofs will sum with an error code, which is strange behaviour. Also if nofs < ENOENT this will cause an overflow. err will be equal to -ENOENT with the following call stack: truncate_nodes() f2fs_get_node_page() __get_node_page() read_node_page() " If nat is corrupted, truncate_nodes() may return -ENOENT, and f2fs_truncate_inode_blocks() doesn't handle such error correctly, fix it. Reported-by:Roman Smirnov <r.smirnov@omp.ru> Closes: https://lore.kernel.org/linux-f2fs-devel/085b27fd2b364a3c8c3a9ca77363e246@omp.ruSigned-off-by:
-
Yeongjin Gil authored
If f2fs_evict_inode is called between freeze_super and thaw_super, the s_writer rwsem count may become negative, resulting in hang. CPU1 CPU2 f2fs_resize_fs() f2fs_evict_inode() f2fs_freeze set SBI_IS_FREEZING skip sb_start_intwrite f2fs_unfreeze clear SBI_IS_FREEZING sb_end_intwrite To solve this problem, the call to sb_end_write is determined by whether sb_start_intwrite is called, rather than the current freezing status. Reviewed-by:Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by:
Sunmin Jeong <s_min.jeong@samsung.com> Signed-off-by:
Yeongjin Gil <youngjin.gil@samsung.com> Reviewed-by:
-
Chao Yu authored
Support .shutdown callback in f2fs_sops, then, it can be called to shut down the file system when underlying block device is marked dead. Signed-off-by:
-
- 25 Mar, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Andreas Gruenbacher: - Fix boundary check in punch_hole * tag 'gfs2-v6.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix invalid metadata access in punch_hole
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a regression that broke iwd as well as a divide by zero in iaa" * tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: iaa - Fix nr_cpus < nr_iaa case Revert "crypto: pkcs7 - remove sha1 support"
-
- 24 Mar, 2024 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Fix logic that is supposed to prevent placement of the kernel image below LOAD_PHYSICAL_ADDR - Use the firmware stack in the EFI stub when running in mixed mode - Clear BSS only once when using mixed mode - Check efi.get_variable() function pointer for NULL before trying to call it * tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix panic in kdump kernel x86/efistub: Don't clear BSS twice in mixed mode x86/efistub: Call mixed mode boot services on the firmware's stack efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Ensure that the encryption mask at boot is properly propagated on 5-level page tables, otherwise the PGD entry is incorrectly set to non-encrypted, which causes system crashes during boot. - Undo the deferred 5-level page table setup as it cannot work with memory encryption enabled. - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset to the default value but the cached variable is not, so subsequent comparisons might yield the wrong result and as a consequence the result prevents updating the MSR. - Register the local APIC address only once in the MPPARSE enumeration to prevent triggering the related WARN_ONs() in the APIC and topology code. - Handle the case where no APIC is found gracefully by registering a fake APIC in the topology code. That makes all related topology functions work correctly and does not affect the actual APIC driver code at all. - Don't evaluate logical IDs during early boot as the local APIC IDs are not yet enumerated and the invoked function returns an error code. Nothing requires the logical IDs before the final CPUID enumeration takes place, which happens after the enumeration. - Cure the fallout of the per CPU rework on UP which misplaced the copying of boot_cpu_data to per CPU data so that the final update to boot_cpu_data got lost which caused inconsistent state and boot crashes. - Use copy_from_kernel_nofault() in the kprobes setup as there is no guarantee that the address can be safely accessed. - Reorder struct members in struct saved_context to work around another kmemleak false positive - Remove the buggy code which tries to update the E820 kexec table for setup_data as that is never passed to the kexec kernel. - Update the resource control documentation to use the proper units. - Fix a Kconfig warning observed with tinyconfig * tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Move 5-level paging global variable assignments back x86/boot/64: Apply encryption mask to 5-level pagetable update x86/cpu: Add model number for another Intel Arrow Lake mobile processor x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Documentation/x86: Document that resctrl bandwidth control units are MiB x86/mpparse: Register APIC address only once x86/topology: Handle the !APIC case gracefully x86/topology: Don't evaluate logical IDs during early boot x86/cpu: Ensure that CPU info updates are propagated on UP kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address x86/pm: Work around false positive kmemleak report in msr_build_context() x86/kexec: Do not update E820 kexec table for setup_data x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler doc clarification from Thomas Gleixner: "A single update for the documentation of the base_slice_ns tunable to clarify that any value which is less than the tick slice has no effect because the scheduler tick is not guaranteed to happen within the set time slice" * tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "This has a set of swiotlb alignment fixes for sometimes very long standing bugs from Will. We've been discussion them for a while and they should be solid now" * tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE iommu/dma: Force swiotlb_max_mapping_size on an untrusted device swiotlb: Fix alignment checks when both allocation and DMA masks are present swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc() swiotlb: Enforce page alignment in swiotlb_alloc() swiotlb: Fix double-allocation of slots due to broken alignment handling
-
Oleksandr Tymoshenko authored
Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware. Fixes: bad267f9 ("efi: verify that variable services are supported") Signed-off-by:
Oleksandr Tymoshenko <ovt@google.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org>
-
Ard Biesheuvel authored
Clearing BSS should only be done once, at the very beginning. efi_pe_entry() is the entrypoint from the firmware, which may not clear BSS and so it is done explicitly. However, efi_pe_entry() is also used as an entrypoint by the mixed mode startup code, in which case BSS will already have been cleared, and doing it again at this point will corrupt global variables holding the firmware's GDT/IDT and segment selectors. So make the memset() conditional on whether the EFI stub is running in native mode. Fixes: b3810c5a ("x86/efistub: Clear decompressor BSS in native EFI entrypoint") Signed-off-by:
-
Ard Biesheuvel authored
Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. Cc: <stable@kernel.org> # v6.1+ Signed-off-by: -
Tom Lendacky authored
Commit 63bed966 ("x86/startup_64: Defer assignment of 5-level paging global variables") moved assignment of 5-level global variables to later in the boot in order to avoid having to use RIP relative addressing in order to set them. However, when running with 5-level paging and SME active (mem_encrypt=on), the variables are needed as part of the page table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(), etc.). Since the variables haven't been set, the page table manipulation is done as if 4-level paging is active, causing the system to crash on boot. While only a subset of the assignments that were moved need to be set early, move all of the assignments back into check_la57_support() so that these assignments aren't spread between two locations. Instead of just reverting the fix, this uses the new RIP_REL_REF() macro when assigning the variables. Fixes: 63bed966 ("x86/startup_64: Defer assignment of 5-level paging global variables") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
-
Tom Lendacky authored
When running with 5-level page tables, the kernel mapping PGD entry is updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC, which, when SME is active (mem_encrypt=on), results in a page table entry without the encryption mask set, causing the system to crash on boot. Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so that the encryption mask is set for the PGD entry. Fixes: 533568e0 ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]") Signed-off-by:
-
Tony Luck authored
This one is the regular laptop CPU. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Adamos Ttofari authored
Commit 67236547 ("x86/fpu: Update XFD state where required") and commit 8bf26758 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. Fixes: 67236547 ("x86/fpu: Update XFD state where required") Signed-off-by:
Adamos Ttofari <attofari@amazon.de> Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
-
Tony Luck authored
The memory bandwidth software controller uses 2^20 units rather than 10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M" Linux define for 0x00100000. Update the documentation to use MiB when describing this feature. It's too late to fix the mount option "mba_MBps" as that is now an established user interface. Signed-off-by:
-
