- 29 Jun, 2022 12 commits
-
-
Christophe Leroy authored
Commit f9b3cd24 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs. It is now necessary to select one of the three DEBUG_INFO_DWARF* options to get DEBUG_INFO enabled. Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all defconfigs using the following command: sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/` Fixes: f9b3cd24 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu
-
Christophe Leroy authored
Remove duplicated code by implementing a proper if/else. Signed-off-by:
-
Christophe Leroy authored
When KASAN is enabled, as shown by the Oops below, the 2k limit is not enough to allow stack dump after a stack overflow detection when CONFIG_DEBUG_STACKOVERFLOW is selected: do_IRQ: stack overflow: 1984 CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 Call Trace: Oops: Kernel stack overflow, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: sr_mod cdrom radeon(+) ohci_pci(+) hwmon i2c_algo_bit drm_ttm_helper ttm drm_dp_helper snd_aoa_i2sbus snd_aoa_soundbus snd_pcm ehci_pci snd_timer ohci_hcd snd ssb ehci_hcd 8250_pci soundcore drm_kms_helper pcmcia 8250 pcmcia_core syscopyarea usbcore sysfillrect 8250_base sysimgblt serial_mctrl_gpio fb_sys_fops usb_common pkcs8_key_parser fuse drm drm_panel_orientation_quirks configfs CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 NIP: c02e5558 LR: c07eb3bc CTR: c07f46a8 REGS: e7fe9f50 TRAP: 0000 Not tainted (5.18.0-gentoo-PMacG4) MSR: 00001032 <ME,IR,DR,RI> CR: 44a14824 XER: 20000000 GPR00: c07eb3bc eaa1c000 c26baea0 eaa1c0a0 00000008 00000000 c07eb3bc eaa1c010 GPR08: eaa1c0a8 04f3f3f3 f1f1f1f1 c07f4c84 44a14824 0080f7e4 00000005 00000010 GPR16: 00000025 eaa1c154 eaa1c158 c0dbad64 00000020 fd543810 eaa1c0a0 eaa1c29e GPR24: c0dbad44 c0db8740 05ffffff fd543802 eaa1c150 c0c9a3c0 eaa1c0a0 c0c9a3c0 NIP [c02e5558] kasan_check_range+0xc/0x2b4 LR [c07eb3bc] format_decode+0x80/0x604 Call Trace: [eaa1c000] [c07eb3bc] format_decode+0x80/0x604 (unreliable) [eaa1c070] [c07f4dac] vsnprintf+0x128/0x938 [eaa1c110] [c07f5788] sprintf+0xa0/0xc0 [eaa1c180] [c0154c1c] __sprint_symbol.constprop.0+0x170/0x198 [eaa1c230] [c07ee71c] symbol_string+0xf8/0x260 [eaa1c430] [c07f46d0] pointer+0x15c/0x710 [eaa1c4b0] [c07f4fbc] vsnprintf+0x338/0x938 [eaa1c550] [c00e8fa0] vprintk_store+0x2a8/0x678 [eaa1c690] [c00e94e4] vprintk_emit+0x174/0x378 [eaa1c6d0] [c00ea008] _printk+0x9c/0xc0 [eaa1c750] [c000ca94] show_stack+0x21c/0x260 [eaa1c7a0] [c07d0bd4] dump_stack_lvl+0x60/0x90 [eaa1c7c0] [c0009234] __do_IRQ+0x170/0x174 [eaa1c800] [c0009258] do_IRQ+0x20/0x34 [eaa1c820] [c00045b4] HardwareInterrupt_virt+0x108/0x10c ... As the detection is asynchronously performed at IRQs, we could be long after the limit has been crossed, so increasing the limit would not solve the problem completely. In order to be sure that there is enough stack space for the stack dump, do it after the switch to the IRQ stack. That way it is sure that the stack is large enough, unless the IRQ stack has been overfilled in which case the end of life is close. Reported-by:
Erhard Furtner <erhard_f@mailbox.org> Signed-off-by:
-
Christophe Leroy authored
Since commit 48cf12d8 ("powerpc/irq: Inline call_do_irq() and call_do_softirq()"), __do_irq() is not used outside irq.c Reorder functions and make __do_irq() static and drop the declaration in irq.h. Signed-off-by:
-
Christophe Leroy authored
When KASAN is enabled, as shown by the Oops below, the 2k limit is not enough to allow stack dump after a stack overflow detection when CONFIG_DEBUG_STACKOVERFLOW is selected: do_IRQ: stack overflow: 1984 CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 Call Trace: Oops: Kernel stack overflow, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: sr_mod cdrom radeon(+) ohci_pci(+) hwmon i2c_algo_bit drm_ttm_helper ttm drm_dp_helper snd_aoa_i2sbus snd_aoa_soundbus snd_pcm ehci_pci snd_timer ohci_hcd snd ssb ehci_hcd 8250_pci soundcore drm_kms_helper pcmcia 8250 pcmcia_core syscopyarea usbcore sysfillrect 8250_base sysimgblt serial_mctrl_gpio fb_sys_fops usb_common pkcs8_key_parser fuse drm drm_panel_orientation_quirks configfs CPU: 0 PID: 126 Comm: systemd-udevd Not tainted 5.18.0-gentoo-PMacG4 #1 NIP: c02e5558 LR: c07eb3bc CTR: c07f46a8 REGS: e7fe9f50 TRAP: 0000 Not tainted (5.18.0-gentoo-PMacG4) MSR: 00001032 <ME,IR,DR,RI> CR: 44a14824 XER: 20000000 GPR00: c07eb3bc eaa1c000 c26baea0 eaa1c0a0 00000008 00000000 c07eb3bc eaa1c010 GPR08: eaa1c0a8 04f3f3f3 f1f1f1f1 c07f4c84 44a14824 0080f7e4 00000005 00000010 GPR16: 00000025 eaa1c154 eaa1c158 c0dbad64 00000020 fd543810 eaa1c0a0 eaa1c29e GPR24: c0dbad44 c0db8740 05ffffff fd543802 eaa1c150 c0c9a3c0 eaa1c0a0 c0c9a3c0 NIP [c02e5558] kasan_check_range+0xc/0x2b4 LR [c07eb3bc] format_decode+0x80/0x604 Call Trace: [eaa1c000] [c07eb3bc] format_decode+0x80/0x604 (unreliable) [eaa1c070] [c07f4dac] vsnprintf+0x128/0x938 [eaa1c110] [c07f5788] sprintf+0xa0/0xc0 [eaa1c180] [c0154c1c] __sprint_symbol.constprop.0+0x170/0x198 [eaa1c230] [c07ee71c] symbol_string+0xf8/0x260 [eaa1c430] [c07f46d0] pointer+0x15c/0x710 [eaa1c4b0] [c07f4fbc] vsnprintf+0x338/0x938 [eaa1c550] [c00e8fa0] vprintk_store+0x2a8/0x678 [eaa1c690] [c00e94e4] vprintk_emit+0x174/0x378 [eaa1c6d0] [c00ea008] _printk+0x9c/0xc0 [eaa1c750] [c000ca94] show_stack+0x21c/0x260 [eaa1c7a0] [c07d0bd4] dump_stack_lvl+0x60/0x90 [eaa1c7c0] [c0009234] __do_IRQ+0x170/0x174 [eaa1c800] [c0009258] do_IRQ+0x20/0x34 [eaa1c820] [c00045b4] HardwareInterrupt_virt+0x108/0x10c ... An investigation shows that on PPC32, calling dump_stack() requires more than 1k when KASAN is not selected and a bit more than 2k bytes when KASAN is selected. On PPC64 the registers are twice the size of PPC32 registers, so the need should be approximately twice the need on PPC32. In the meantime we have THREAD_SIZE which is twice larger on PPC64 than PPC32, and twice larger when KASAN is selected. So we can easily use the value of THREAD_SIZE to set the limit. On PPC32, THREAD_SIZE is 8k without KASAN and 16k with KASAN. On PPC64, THREAD_SIZE is 16k without KASAN. To be on the safe side, leave 2k on PPC32 without KASAN, 4k with KASAN, and 4k on PPC64 without KASAN. It means the limit should be one fourth of THREAD_SIZE. Reported-by:
-
Christophe Leroy authored
Use WRITE_ONCE() instead of opencoding the saving of current stack pointeur. Signed-off-by:
-
Christophe Leroy authored
Replace #ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG and #ifdef CONFIG_PERF_EVENTS by IS_ENABLED() in hw_irq.h and plpar_wrappers.h Signed-off-by:
-
Christophe Leroy authored
Use READ_ONCE() and WRITE_ONCE() instead of open coding read and write of local PACA irq_soft_mask. For the write, add a barrier to keep the memory clobber that was there previously. Signed-off-by:
-
Christophe Leroy authored
No need to open code the read of local_paca->irq_happened in assembly, we have READ_ONCE() for doing the same. Replace get_irq_happened() by READ_ONCE(local_paca->irq_happened). Signed-off-by:
-
Christophe Leroy authored
More than half of irq.c is dedicated to PPC64. Move PPC64 code out of irq.c into irq_64.c Signed-off-by:
-
Christophe Leroy authored
asm/ppc_asm.h is not needed in any of the header it is included. It is only needed by irq.c. Include it there and remove it from other headers. word-at-a-time.h only need ex_table.h, so include it instead. Signed-off-by:
-
Christophe Leroy authored
Trying to remove asm/ppc_asm.h from all places that don't need it leads to several failures linked to firmware_has_feature(). To fix it, include asm/firmware.h in all files using firmware_has_feature() All users found with: git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("` Signed-off-by:
-
- 28 Jun, 2022 28 commits
-
-
Kajol Jain authored
The testcase checks if the transalation of a generic hardware cache event is done properly via perf interface. The hardware cache events has type as PERF_TYPE_HW_CACHE and each event points to raw event code id. Testcase checks different combination of cache level, cache event operation type and cache event result type and verify for a given event code, whether transalation matches with the current cache event mappings via perf interface. Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
Thresh select bits in the event code is used to program thresh_sel field in Monitor Mode Control Register A (MMCRA: 45-47). When scheduling events as a group, all events in that group should match value in these bits. Otherwise event open for the sibling events will fail. Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and another event PM_THRESH_MET (0x101ec) as sibling event, and checks if group constraint checks for thresh_sel field added correctly via perf interface. Signed-off-by:
-
Kajol Jain authored
Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). When scheduling events as a group, all events in that group should match value in these bits. Otherwise event open for the sibling events will fail. Testcase uses event code PM_MRK_INST_CMPL (0x401e0) as leader and another event PM_THRESH_MET (101ec) as sibling event, and checks if group constraint checks for thresh_ctl field added correctly via perf interface. Signed-off-by:
-
Kajol Jain authored
Unit and pmu bits in the event code is used to program unit and pmc fields in Monitor Mode Control Register 1 (MMCR1). For power9 platform, incase unit field value is within 6 to 9, one of the event in the group should use PMC4. Otherwise event_open should fail for that group. Signed-off-by:
-
Kajol Jain authored
Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9 and MMCRA: 8-18 bits for power10). When scheduling events as a group, all events in that group should match value in thresh compare bits. Otherwise event open for the sibling events will fail. Testcase uses event code "0x401e0" as leader and another event "0x101ec" as sibling event, and checks for thresh compare constraint via perf interface. Signed-off-by:
-
Kajol Jain authored
Data and instruction cache qualifier bits in the event code is used to program cache select field in Monitor Mode Control Register 1 (MMCR1: 16-17). When scheduling events as a group, all events in that group should match value in these bits. Otherwise event open for the sibling events will fail. Testcase uses event code "0x1100fc" as leader and other events like "0x23e054" and "0x13e054" as sibling events to checks for l1 cache select field constraints via perf interface. Signed-off-by:
-
Kajol Jain authored
In power10, L2L3 select bits in the event code is used to program l2l3_sel field in Monitor Mode Control Register 0 (MMCR0: 56-60). When scheduling events as a group, all events in that group should match value in these bits. Otherwise event open for the sibling events will fail. Testcase uses event code "0x010000046080" as leader and another events "0x26880" and "0x010000026880" as sibling events, and checks for l2l3_sel constraints via perf interface for ISA v3.1 platform. Signed-off-by:
-
Athira Rajeev authored
Testcase to ensure that using invalid event in generic event for PERF_TYPE_HARDWARE will fail. Invalid generic events in power10 are: - PERF_COUNT_HW_BUS_CYCLES - PERF_COUNT_HW_STALLED_CYCLES_FRONTEND - PERF_COUNT_HW_STALLED_CYCLES_BACKEND - PERF_COUNT_HW_REF_CPU_CYCLES Invalid generic events in power9 are: - PERF_COUNT_HW_BUS_CYCLES - PERF_COUNT_HW_REF_CPU_CYCLES Testcase does event open for valid and invalid generic events to ensure event open works for all valid events and fails for invalid events. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Platform specific PMU supports alternative event for some of the event codes. During perf_event_open, it any event group doesn't match constraint check criteria, further lookup is done to find alternative event. Code checks to see if it is possible to schedule event as group using alternative events. Testcase exercises the alternative event find code for power10. Example, Using PMC1 to PMC4 in a group and again trying to schedule PM_CYC_ALT (0x0001e) will fail since this exceeds number of programmable events in group. But since 0x600f4 is an alternative event for 0x0001e, it is possible to use 0x0001e in the group. Testcase uses such combination all events in power10 which has alternative event. Signed-off-by:
-
Athira Rajeev authored
Platform specific PMU supports alternative event for some of the event codes. During perf_event_open, it any event group doesn't match constraint check criteria, further lookup is done to find alternative event. Code checks to see if it is possible to schedule event as group using alternative events. Testcase exercises the alternative event find code for power9. Example, since events in same PMC can't go in as a group, ideally using PM_RUN_CYC_ALT (0x200f4) and PM_BR_TAKEN_CMPL (0x200fa) will fail. But since RUN_CYC (0x600f4) is alternative event for 0x200f4, it is possible to use 0x600f4 and 0x200fa as group. Testcase uses such combination for all events in power9 which has an alternative event. Signed-off-by:
-
Athira Rajeev authored
Some of the events are blacklisted in power9. The list of blacklisted events are noted in power9-events-list.h When trying to do event open for any of these blacklisted event will cause a failure. Testcase ensures that using blacklisted events will cause event_open to fail in power9. This test is only applicable on power9 DD2.1 and DD2.2 and hence test adds checks to skip on other platforms. Signed-off-by:
-
Athira Rajeev authored
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA) thresh_ctl bits. For MMCRA[48:51]/[52:55]) Threshold Start/Stop, 0b11110000/0b00001111 is reserved. Signed-off-by:
-
Athira Rajeev authored
Some of the bits in the event code is reserved for specific platforms. Event code bits 52-59 are reserved in power9, whereas in power10, these are used for programming Monitor Mode Control Register 3 (MMCR3). Bit 9 in event code is reserved in power9, whereas it is used for programming "radix_scope_qual" bit 18 in Monitor Mode Control Register 1 (MMCR1). Testcase to ensure that using reserved bits in event code should cause event_open to fail. Signed-off-by:
-
Athira Rajeev authored
Events with different "sample" field values which is used to program Monitor Mode Control Register A (MMCRA) in a group will fail to schedule. Testcase uses event with load only sampling mode as group leader and event with store only sampling as sibling event. So that it can check that using different sample bits in event code will fail in event open for group of events Signed-off-by:
-
Athira Rajeev authored
Testcase for reserved bits in Monitor Mode Control Register A (MMCRA) Random Sampling Mode (SM) value. As per Instruction Set Architecture (ISA), the values 0x5, 0x9, 0xD, 0x19, 0x1D, 0x1A, 0x1E are reserved for sampling mode field. Test that having these reserved bit values should cause event_open to fail. Input event code in testcases uses these sampling bits along with 401e0 (PM_MRK_INST_CMPL). Signed-off-by:
-
Athira Rajeev authored
Testcase for group constraint check for radix_scope_qual field which is used to program Monitor Mode Control Register (MMCR1) bit 18. All events in the group should match radix_scope_qual bit, otherwise event_open for the group should fail. Testcase uses "0x14242" (PM_DATA_RADIX_PROCESS_L2_PTE_FROM_L2) with radix_scope_qual bit set for power10. Signed-off-by:
-
Athira Rajeev authored
Testcase for group constraint check when using events with same PMC. Multiple events in a group asking for same PMC should fail. Testcase uses "0x22C040" on PMC2 as leader and also subling which is expected to fail. Using PMC1 for sibling event should pass the test. Signed-off-by:
-
Athira Rajeev authored
Testcase for group constraint check for number of counters in use. The number of programmable counters is from PMC1 to PMC4. Testcase uses four events with PMC1 to PMC4 and 5th event without any PMC which is expected to fail since it is exceeding the number of counters in use. Signed-off-by:
-
Athira Rajeev authored
Events using Performance Monitor Counter 5 (PMC5) and Performance Monitor Counter 6 (PMC6) should be excluded from constraint check when scheduled along with group of events. Example, combination of PMC5, PMC6, and an event with cache bit will succeed to schedule though first two events doesn't have cache bit set. Testcase use three events, ie, 600f4(cycles), 500fa(instructions), 22C040 with cache bit (dc_ic) set to test this constraint check. Signed-off-by:
-
Athira Rajeev authored
Events using Performance Monitor Counter 5 (PMC5) and Performance Monitor Counter 6 (PMC6) can't have other fields in event code like cache bits, thresholding or marked bit. PMC5 and PMC6 only supports base events: ie 500fa and 600f4. Other combinations should fail. Testcase tries setting other bits in event code for 500fa and 600f4 to check this scenario. Signed-off-by:
-
Athira Rajeev authored
Add new folder for enabling perf event code tests which includes checking for group constraints, valid/invalid events, also checks for event excludes, alternatives so on. A new folder "event_code_tests", is created under "selftests/powerpc/pmu". Also updates the corresponding Makefiles in "selftests/powerpc" and "event_code_tests" folder. Signed-off-by:
-
Kajol Jain authored
The testcase uses "instructions" event to generate the samples and fetch Monitor Mode Control Register A (MMCRA) when overflow. Branch History Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be verified by perf interface. Incase sample is not of branch type, bhrb disable bit is explicitly set to 1. Testcase checks if the bhrb disable bit is set of MMCRA register via perf interface for ISA v3.1 platform Signed-off-by:
-
Athira Rajeev authored
The testcase uses event code "0x21c040" to verify the settings for different fields in Monitor Mode Control Register 1 (MMCR1). The fields include PMCxSEL, PMCXCOMB PMCxUNIT, cache. Checks if these fields are translated correctly via perf interface to MMCR1 Signed-off-by:
-
Athira Rajeev authored
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type, ie branch filters are supported. All the branch filters are not supported in powerpc. Example, power10 platform supports any, ind_call and cond branch filters. Whereas, it is different in power9. Testcase checks event open for invalid and valid branch sample types. The branch types for testcase are picked from "perf_branch_sample_type" in perf_event.h Signed-off-by:
-
Athira Rajeev authored
selftests/powerpc/pmu: Add selftest to check PERF_SAMPLE_REGS_INTR option will not crash on any platforms With sampling, --intr-regs option is used for capturing interrupt regs. When --intr-regs option is used, PMU code uses is_sier_available() function which uses PMU flags in the code. In environment where platform specific PMU is not registered, PMU flags is not defined. A fix was added in kernel to address crash while accessing is_sier_available() function when pmu is not set. commit f75e7d73 ("powerpc/perf: Fix crash with is_sier_available when pmu is not set"). Add perf sampling test to exercise this code and make sure enabling intr_regs shouldn't crash in any platform. Testcase uses software event cycles since software event will work even in cases without PMU. Signed-off-by:
-
Athira Rajeev authored
selftests/powerpc/pmu: Add selftest to check branch stack enablement will not crash on any platforms While enabling branch stack for an event, BHRB (Branch History Rolling Buffer) filter is set using bhrb_filter_map() callback. This callback is not defined for cases like generic_compat_pmu or in case where there is no PMU registered. A fix was added in kernel to address a crash issue observed while enabling branch stack for environments which doesn't have this callback. commit b460b512 ("powerpc/perf: Fix crashes with generic_compat_pmu & BHRB"). Add perf sampling test to exercise this code path and make sure enabling branch stack shouldn't crash in any platform. Testcase uses software event cycles since software event is available and can be used even in cases without PMU. Signed-off-by:
-
Athira Rajeev authored
The platform check for selftest support "check_pvr_for_sampling_tests" is specific to sampling tests which includes PVR check, presence of PMU and extended regs support. Extended regs support is needed for sampling tests which tests whether PMU registers are programmed correctly. There could be other sampling tests which may not need extended regs, example, bhrb filter tests which only needs validity check via event open. Hence refactor the platform check to have a common function "platform_check_for_tests" that checks only for PVR check and presence of PMU. The existing function "check_pvr_for_sampling_tests" will invoke the common function and also will include checks for extended regs specific for sampling. The common function can also be used by tests other than sampling like event code tests. Add macro to find array size ("ARRAY_SIZE") to sampling tests "misc.h" file. This can be used in next tests to find event array size. Also update "include/reg.h" to add macros to find minor and major version from PVR which will be used in testcases. Signed-off-by: -
Kajol Jain authored
The testcase uses "instructions" event to generate the samples and fetch Monitor Mode Control Register A (MMCRA) when overflow. Branch History Rolling Buffer(bhrb) disable bit is part of MMCRA which need to be verified by perf interface. Testcase checks if the bhrb disable bit of MMCRA register is programmed correctly via perf interface for ISA v3.1 platform Also make get_mmcra_ifm return type as u64. Signed-off-by:
-
