Skip to content

L
linux
Switch branch/tag
  1. 01 Aug, 2021 2 commits
  3. 30 Jul, 2021 14 commits
  5. 29 Jul, 2021 24 commits
    • Tang Bin's avatar
      bcm63xx_enet: delete a redundant assignment · 3e12361b
      Tang Bin authored 
      In the function bcm_enetsw_probe(), 'ret' will be assigned by
bcm_enet_change_mtu(), so 'ret = 0' make no sense.
Signed-off-by: default avatarZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: default avatarTang Bin <tangbin@cmss.chinamobile.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e12361b
    • Vladimir Oltean's avatar
      net: dsa: don't set skb->offload_fwd_mark when not offloading the bridge · bea79078
      Vladimir Oltean authored 
      DSA has gained the recent ability to deal gracefully with upper
interfaces it cannot offload, such as the bridge, bonding or team
drivers. When such uppers exist, the ports are still in standalone mode
as far as the hardware is concerned.

But when we deliver packets to the software bridge in order for that to
do the forwarding, there is an unpleasant surprise in that the bridge
will refuse to forward them. This is because we unconditionally set
skb->offload_fwd_mark = true, meaning that the bridge thinks the frames
were already forwarded in hardware by us.

Since dp->bridge_dev is populated only when there is hardware offload
for it, but not in the software fallback case, let's introduce a new
helper that can be called from the tagger data path which sets the
skb->offload_fwd_mark accordingly to zero when there is no hardware
offload for bridging. This lets the bridge forward packets back to other
interfaces of our switch, if needed.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bea79078
    • Di Zhu's avatar
      ipvlan: Add handling of NETDEV_UP events · 57fb346c
      Di Zhu authored 
      When an ipvlan device is created on a bond device, the link state
of the ipvlan device may be abnormal. This is because bonding device
allows to add physical network card device in the down state and so
NETDEV_CHANGE event will not be notified to other listeners, so ipvlan
has no chance to update its link status.

The following steps can cause such problems:
	1) bond0 is down
	2) ip link add link bond0 name ipvlan type ipvlan mode l2
	3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves
	4) ip link set bond0 up

After these steps, use ip link command, we found ipvlan has NO-CARRIER:
  ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...>

We can deal with this problem like VLAN: Add handling of NETDEV_UP
events. If we receive NETDEV_UP event, we will update the link status
of the ipvlan.
Signed-off-by: default avatarDi Zhu <zhudi21@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57fb346c
    • Davide Caratti's avatar
      net/sched: store the last executed chain also for clsact egress · 3aa26055
      Davide Caratti authored 
      currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain
id' in the skb extension. However, userspace programs (like ovs) are able
to setup egress rules, and datapath gets confused in case it doesn't find
the 'chain id' for a packet that's "recirculated" by tc.
Change tcf_classify() to have the same semantic as tcf_classify_ingress()
so that a single function can be called in ingress / egress, using the tc
ingress / egress block respectively.
Suggested-by: default avatarAlaa Hleilel <alaa@nvidia.com>
Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
Reviewed-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3aa26055
    • David S. Miller's avatar
      Merge branch 'dpaa2-switch-add-mirroring-support' · b2492d50
      David S. Miller authored 
      Ioana Ciornei says:

====================
dpaa2-switch: add mirroring support

This patch set adds per port and per VLAN mirroring in dpaa2-switch.

The first 4 patches are just cosmetic changes. We renamed the
dpaa2_switch_acl_tbl structure into dpaa2_switch_filter_block so that we
can reuse it for filters that do not use the ACL table and reorganized
the addition of trap, redirect and drop filters into a separate
function. All this just to make for a more streamlined addition of the
support for mirroring.

The next 4 patches are actually adding the advertised support. Mirroring
rules can be added in shared blocks, the driver will replicate the same
configuration on all the switch ports part of the same block.

The last patch documents the feature, presents its behavior and
limitations and gives a couple of examples.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b2492d50
    • Ioana Ciornei's avatar
      docs: networking: dpaa2: document mirroring support on the switch · d1626a1c
      Ioana Ciornei authored 
      Document the mirroring capabilities of the dpaa2-switch driver,
any restrictions that are imposed and some example commands.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d1626a1c
    • Ioana Ciornei's avatar
      dpaa2-switch: offload shared block mirror filters when binding to a port · 7a91f907
      Ioana Ciornei authored 
      When mirroring rules are added in shared filter blocks, the same
mirroring rule has to be configured on all the switch ports that are
part of the same block.

In case a switch port joins a shared block after mirroring filters have
been already added to it, then all the mirror rules should be offloaded
to the port. The reverse, removal of mirroring rules, has to be done at
block unbind.

For this purpose, the dpaa2_switch_block_offload_mirror() and
dpaa2_switch_block_unoffload_mirror() functions are added and called
upon binding and unbinding a switch port to/from a block.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a91f907
    • Ioana Ciornei's avatar
      dpaa2-switch: add VLAN based mirroring · 0f3faece
      Ioana Ciornei authored 
      Using the infrastructure added in the previous patch, extend tc-flower
support with FLOW_ACTION_MIRRED based on VLAN.

Tested with:

tc qdisc add dev eth8 ingress_block 1 clsact
tc filter add block 1 ingress protocol 802.1q flower skip_sw \
	vlan_id 100 action mirred egress mirror dev eth6
tc filter del block 1 ingress pref 49152
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f3faece
    • Ioana Ciornei's avatar
      dpaa2-switch: add support for port mirroring · e0ead825
      Ioana Ciornei authored 
      Add support for per port mirroring for the DPAA2 switch. We support
only single mirror port, therefore we allow mirroring rules only as long
as the destination port is always the same.

Unlike all the actions (drop, redirect, trap) already supported by the
dpaa2-switch driver, adding mirroring filters in shared blocks is not
achieved by a singular ACL entry added in a table shared by the ports.
This is why, when a new mirror filter is added in a block we have to got
through all the switch ports sharing it and configure the filter
individually on all.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0ead825
    • Ioana Ciornei's avatar
      dpaa2-switch: add API for setting up mirroring · cbc2a889
      Ioana Ciornei authored 
      Add the necessary MC API for setting up and configuring the mirroring
feature on the DPSW DPAA2 object.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cbc2a889
    • Ioana Ciornei's avatar
      dpaa2-switch: reorganize dpaa2_switch_cls_matchall_replace · 3fa5514a
      Ioana Ciornei authored 
      Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_matchall_replace_acl().

This is intended to help with the code readability when the mirroring
support is added.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3fa5514a
    • Ioana Ciornei's avatar
      dpaa2-switch: reorganize dpaa2_switch_cls_flower_replace · c5f6d490
      Ioana Ciornei authored 
      Extract the necessary steps to offload a filter by using the ACL table
in a separate function - dpaa2_switch_cls_flower_replace_acl().
This is intended to help with the code readability when the mirroring
support is added.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c5f6d490
    • Ioana Ciornei's avatar
      dpaa2-switch: rename dpaa2_switch_acl_tbl into filter_block · adcb7aa3
      Ioana Ciornei authored 
      Until now, shared filter blocks were implemented only by ACL tables
shared between ports. Going forward, when the mirroring support will be
added, this will not be true anymore.

Rename the dpaa2_switch_acl_tbl into dpaa2_switch_filter_block so that
we make it clear that the structure is used not only for filters that
use the ACL table but will be used for all the filters that are added in
a block.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      adcb7aa3
    • Ioana Ciornei's avatar
      dpaa2-switch: rename dpaa2_switch_tc_parse_action to specify the ACL · 3b5d8b44
      Ioana Ciornei authored 
      Until now, the dpaa2_switch_tc_parse_action() function was used for all
the supported tc actions since all of them were implemented by adding
ACL table entries. In the next commits, the dpaa2-switch driver will
gain mirroring support which is not using the same HW feature.

Make sure that we specify the ACL in the function name so that we make
it clear that it's only used for specific actions.
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b5d8b44
    • Shai Malin's avatar
      qede: Remove the qede module version · 88ea96f8
      Shai Malin authored 
      Removing the qede module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: default avatarPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      88ea96f8
    • Shai Malin's avatar
      qed: Remove the qed module version · 7a3febed
      Shai Malin authored 
      Removing the qed module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: default avatarPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a3febed
    • David S. Miller's avatar
      Merge branch 'sja110-vlan-fixes' · 3bdf4d61
      David S. Miller authored 
      Vladimir Oltean says:

====================
NXP SJA1105 VLAN regressions

These are 3 patches to fix issues seen with some more varied testing
done after the changes in the "Traffic termination for sja1105 ports
under VLAN-aware bridge" series were made:
https://patchwork.kernel.org/project/netdevbpf/cover/20210726165536.1338471-1-vladimir.oltean@nxp.com/

Issue 1: traffic no longer works on a port after leaving a VLAN-aware bridge
Issue 2: untagged traffic not dropped if pvid is absent from a VLAN-aware port
Issue 3: PTP and STP broken on ports under a VLAN-aware bridge
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bdf4d61
    • Vladimir Oltean's avatar
      net: dsa: tag_sja1105: fix control packets on SJA1110 being received on an imprecise port · 04a17583
      Vladimir Oltean authored 
      On RX, a control packet with SJA1110 will have:
- an in-band control extension (DSA tag) composed of a header and an
  optional trailer (if it is a timestamp frame). We can (and do) deduce
  the source port and switch id from this.
- a VLAN header, which can either be the tag_8021q RX VLAN (pvid) or the
  bridge VLAN. The sja1105_vlan_rcv() function attempts to deduce the
  source port and switch id a second time from this.

The basic idea is that even though we don't need the source port
information from the tag_8021q header if it's a control packet, we do
need to strip that header before we pass it on to the network stack.

The problem is that we call sja1105_vlan_rcv for ports under VLAN-aware
bridges, and that function tells us it couldn't identify a tag_8021q
header, so we need to perform imprecise RX by VID. Well, we don't,
because we already know the source port and switch ID.

This patch drops the return value from sja1105_vlan_rcv and we just look
at the source_port and switch_id values from sja1105_rcv and sja1110_rcv
which were initialized to -1. If they are still -1 it means we need to
perform imprecise RX.

Fixes: 884be12f ("net: dsa: sja1105: add support for imprecise RX")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04a17583
    • Vladimir Oltean's avatar
      net: dsa: sja1105: make sure untagged packets are dropped on ingress ports with no pvid · bef0746c
      Vladimir Oltean authored 
      Surprisingly, this configuration:

ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1

still has the sja1105 switch sending untagged packets to the CPU (and
failing to decode them, since dsa_find_designated_bridge_port_by_vid
searches by VID 1 and rightfully finds no bridge VLAN 1 on a port).

Dumping the switch configuration, the VLANs are managed properly:
- the pvid of swp2 is 1 in the MAC Configuration Table, but
- only the CPU port is in the port membership of VLANID 1 in the VLAN
  Lookup Table

When the ingress packets are tagged with VID 1, they are properly
dropped. But when they are untagged, they are able to reach the CPU
port. Also, when the pvid in the MAC Configuration Table is changed to
e.g. 55 (an unused VLAN), the untagged packets are also dropped.

So it looks like:
- the switch bypasses ingress VLAN membership checks for untagged traffic
- the reason why the untagged traffic is dropped when I make the pvid 55
  is due to the lack of valid destination ports in VLAN 55, rather than
  an ingress membership violation
- the ingress VLAN membership cheks are only done for VLAN-tagged traffic

Interesting. It looks like there is an explicit bit to drop untagged
traffic, so we should probably be using that to preserve user expectations.

Note that only VLAN-aware ports should drop untagged packets due to no
pvid - when VLAN-unaware, the software bridge doesn't do this even if
there is no pvid on any bridge port and on the bridge itself. So the new
sja1105_drop_untagged() function cannot simply be called with "false"
from sja1105_bridge_vlan_add() and with "true" from sja1105_bridge_vlan_del.
Instead, we need to also consider the VLAN awareness state. That means
we need to hook the "drop untagged" setting in all the same places where
the "commit pvid" logic is, and it needs to factor in all the state when
flipping the "drop untagged" bit: is our current pvid in the VLAN Lookup
Table, and is the current port in that VLAN's port membership list?
VLAN-unaware ports will never drop untagged frames because these checks
always succeed by construction, and the tag_8021q VLANs cannot be changed
by the user.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bef0746c
    • Vladimir Oltean's avatar
      net: dsa: sja1105: reset the port pvid when leaving a VLAN-aware bridge · cde8078e
      Vladimir Oltean authored 
      Now that we no longer have the ultra-central sja1105_build_vlan_table(),
we need to be more careful about checking all corner cases manually.

For example, when a port leaves a VLAN-aware bridge, it becomes
standalone so its pvid should become a tag_8021q RX VLAN again. However,
sja1105_commit_pvid() only gets called from sja1105_bridge_vlan_add()
and from sja1105_vlan_filtering(), and no VLAN awareness change takes
place (VLAN filtering is a global setting for sja1105, so the switch
remains VLAN-aware overall).

This means that we need to put another sja1105_commit_pvid() call in
sja1105_bridge_member().

Fixes: 6dfd23d3 ("net: dsa: sja1105: delete vlan delta save/restore logic")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cde8078e
    • David S. Miller's avatar
      Merge branch 'mctp' · e5fe3a5f
      David S. Miller authored 
      Jeremy Kerr says:

====================
Add Management Component Transport Protocol support

This series adds core MCTP support to the kernel. From the Kconfig
description:

  Management Component Transport Protocol (MCTP) is an in-system
  protocol for communicating between management controllers and
  their managed devices (peripherals, host processors, etc.). The
  protocol is defined by DMTF specification DSP0236.

  This option enables core MCTP support. For communicating with other
  devices, you'll want to enable a driver for a specific hardware
  channel.

This implementation allows a sockets-based API for sending and receiving
MCTP messages via sendmsg/recvmsg on SOCK_DGRAM sockets. Kernel stack
control is all via netlink, using existing RTM_* messages. The userspace
ABI change is fairly small; just the necessary AF_/ETH_P_/ARPHDR_
constants, a new sockaddr, and a new netlink attribute.

For MAINTAINERS, I've just included netdev@ as the list entry. I'm happy
to alter this based on preferences here - an alternative would be the
OpenBMC list (the main user of the MCTP interface), or we can create a
new list entirely.

We have a couple of interface drivers almost ready to go at the moment,
but those can wait until the core code has some review.

This is v4 of the series; v1 and v2 were both RFC.

selinux folks: CCing 01/15 due to the new PF_MCTP protocol family.

linux-doc folks: CCing 15/15 for the new MCTP overview document.

Review, comments, questions etc. are most welcome.

Cheers,

Jeremy

v2:
 - change to match spec terminology: controller -> component
 - require specific capabilities for bind() & sendmsg()
 - add address and tag defintions to uapi
 - add selinux AF_MCTP table definitions
 - remove strict cflags; warnings are present in common headers

v3:
 - require caps for MCTP bind() & send()
 - comment typo fixes
 - switch to an array for local EIDs
 - fix addrinfo dump iteration & error path
 - add RTM_DELADDR
 - remove GENMASK() and BIT() from uapi

v4:
 - drop tun patch; that can be submitted separately
 - keep nipa happy: add maintainer CCs, including doc and selinux
 - net-next rebase
 - Include AF_MCTP in af_family_slock_keys and pf_family_names
 - Introduce MODULE_ definitions earlier
 - upstream change: set_link_af no longer called with RTNL held
 - add kdoc for net_device.mctp_ptr
 - don't inline mctp_rt_match_eid
 - require rtm_type == RTN_UNICAST in route management handlers
 - remove unused RTAX policy table
 - fix mctp_sock->keys rcu annotations
 - fix spurious rcu_read_unlock in route input
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5fe3a5f
    • Jeremy Kerr's avatar
      mctp: Add MCTP overview document · 6a2d98b1
      Jeremy Kerr authored 
      This change adds a brief document about the sockets API provided for
sending and receiving MCTP messages from userspace.

This is roughly based on the OpenBMC design document, at:

  https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.mdSigned-off-by: default avatarJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a2d98b1
    • Matt Johnston's avatar
      mctp: Allow per-netns default networks · 03f2bbc4
      Matt Johnston authored 
      Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.
Signed-off-by: default avatarMatt Johnston <matt@codeconstruct.com.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03f2bbc4
    • Matt Johnston's avatar
      mctp: Add dest neighbour lladdr to route output · 26ab3fca
      Matt Johnston authored 
      Now that we have a neighbour implementation, hook it up to the output
path to set the dest hardware address for outgoing packets.
Signed-off-by: default avatarMatt Johnston <matt@codeconstruct.com.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26ab3fca
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7